! Started logfile: /scr/pima/bg219a_uvs/J0140+4342_S_dfm.log on Thu May 19 23:47:14 2016 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /scr/pima/bg219a_uvs/J0140+4342_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219a_uvs/J0140+4342_S_uva.fits ! AN table 1: 48 integrations on 15 of 15 possible baselines. ! Apparent sampling: 0.833333 visibilities/baseline/integration-bin. ! Found source: J0140+4342 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 49 lines of history. ! ! Reading 2400 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0140+4342_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.991017Jy sigma=26.526804 ! Fit after self-cal, rms=0.861180Jy sigma=22.955240 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.86 mas, bmaj=4.779 mas, bpa=-34.35 degrees ! Estimated noise=0.873191 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.104764 Jy ! Component: 100 - total flux cleaned = 0.130454 Jy ! Total flux subtracted in 100 components = 0.130454 Jy ! Clean residual min=-0.007660 max=0.010797 Jy/beam ! Clean residual mean=0.000010 rms=0.002283 Jy/beam ! Combined flux in latest and established models = 0.130454 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.130454 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053710Jy sigma=1.326514 ! Fit after self-cal, rms=0.053715Jy sigma=1.326043 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.611 mas, bmaj=5.402 mas, bpa=-31.16 degrees ! Estimated noise=0.552495 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0160886 Jy ! Component: 100 - total flux cleaned = 0.0232574 Jy ! Component: 150 - total flux cleaned = 0.0267042 Jy ! Component: 200 - total flux cleaned = 0.0287497 Jy ! Total flux subtracted in 200 components = 0.0287497 Jy ! Clean residual min=-0.004137 max=0.004524 Jy/beam ! Clean residual mean=0.000009 rms=0.001028 Jy/beam ! Combined flux in latest and established models = 0.159203 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 20 components and 0.159203 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049517Jy sigma=1.193341 ! Fit after self-cal, rms=0.049541Jy sigma=1.192452 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.611 x 5.402 at -31.16 degrees (North through East) ! Clean map min=-0.0039416 max=0.14004 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! LA 0.98 MK 1.00 NL 1.02 OV 1.00 ! PT 0.99 SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! LA 0.95 MK 1.02 NL 1.00 OV 1.04 ! PT 0.98 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! LA 0.99 MK 0.97 NL 0.99 OV 1.04 ! PT 0.97 SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! LA 0.98 MK 1.02 NL 1.01 OV 1.03 ! PT 0.98 SC 0.99 ! ! ! Fit before self-cal, rms=0.049541Jy sigma=1.192452 ! Fit after self-cal, rms=0.049210Jy sigma=1.186256 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.618 mas, bmaj=5.418 mas, bpa=-31.14 degrees ! Estimated noise=0.54995 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000406434 Jy ! Component: 100 - total flux cleaned = -0.000446697 Jy ! Component: 150 - total flux cleaned = -0.000411178 Jy ! Component: 200 - total flux cleaned = -0.000411092 Jy ! Total flux subtracted in 200 components = -0.000411092 Jy ! Clean residual min=-0.003240 max=0.003532 Jy/beam ! Clean residual mean=0.000009 rms=0.000866 Jy/beam ! Combined flux in latest and established models = 0.158792 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 24 components and 0.158792 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049160Jy sigma=1.184669 ! Fit after self-cal, rms=0.049167Jy sigma=1.184580 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049167Jy sigma=1.184580 ! Fit after self-cal, rms=0.048894Jy sigma=1.176354 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.622 mas, bmaj=5.373 mas, bpa=-31.12 degrees ! Estimated noise=0.54874 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000416515 Jy ! Component: 100 - total flux cleaned = -0.000397757 Jy ! Component: 150 - total flux cleaned = -0.000413717 Jy ! Component: 200 - total flux cleaned = -0.000428278 Jy ! Total flux subtracted in 200 components = -0.000428278 Jy ! Clean residual min=-0.002852 max=0.002757 Jy/beam ! Clean residual mean=0.000003 rms=0.000662 Jy/beam ! Combined flux in latest and established models = 0.158364 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 33 components and 0.158364 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.048874Jy sigma=1.176056 ! Fit after self-cal, rms=0.048877Jy sigma=1.175909 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000145406 Jy ! Component: 100 - total flux cleaned = -0.000145286 Jy ! Component: 150 - total flux cleaned = -0.00014513 Jy ! Component: 200 - total flux cleaned = -0.000145024 Jy ! Total flux subtracted in 200 components = -0.000145024 Jy ! Clean residual min=-0.002847 max=0.002702 Jy/beam ! Clean residual mean=0.000003 rms=0.000654 Jy/beam ! Combined flux in latest and established models = 0.158219 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 36 components and 0.158219 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.048865Jy sigma=1.175711 ! Fit after self-cal, rms=0.048866Jy sigma=1.175658 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.048866Jy sigma=1.175658 ! Fit after self-cal, rms=0.048784Jy sigma=1.175599 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.619 mas, bmaj=5.365 mas, bpa=-31.1 degrees ! Estimated noise=0.547834 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000328733 Jy ! Component: 100 - total flux cleaned = -0.000328753 Jy ! Component: 150 - total flux cleaned = -0.000303442 Jy ! Component: 200 - total flux cleaned = -0.000314729 Jy ! Total flux subtracted in 200 components = -0.000314729 Jy ! Clean residual min=-0.002810 max=0.002653 Jy/beam ! Clean residual mean=0.000004 rms=0.000643 Jy/beam ! Combined flux in latest and established models = 0.157904 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 38 components and 0.157904 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.048772Jy sigma=1.175413 ! Fit after self-cal, rms=0.048772Jy sigma=1.175364 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.40655e-05 Jy ! Component: 100 - total flux cleaned = -9.46917e-05 Jy ! Component: 150 - total flux cleaned = -8.26098e-05 Jy ! Component: 200 - total flux cleaned = -8.21005e-05 Jy ! Total flux subtracted in 200 components = -8.21005e-05 Jy ! Clean residual min=-0.002793 max=0.002614 Jy/beam ! Clean residual mean=0.000004 rms=0.000637 Jy/beam ! Combined flux in latest and established models = 0.157822 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 40 components and 0.157822 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.048764Jy sigma=1.175223 ! Fit after self-cal, rms=0.048765Jy sigma=1.175187 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.048765Jy sigma=1.175187 ! Fit after self-cal, rms=0.048680Jy sigma=1.175153 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.188 mas, bmaj=11.48 mas, bpa=-24.76 degrees ! Estimated noise=0.659185 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000247571 Jy ! Component: 100 - total flux cleaned = 0.000251264 Jy ! Component: 150 - total flux cleaned = 0.000239958 Jy ! Component: 200 - total flux cleaned = 0.000220054 Jy ! Total flux subtracted in 200 components = 0.000220054 Jy ! Clean residual min=-0.002685 max=0.002447 Jy/beam ! Clean residual mean=0.000008 rms=0.000691 Jy/beam ! Combined flux in latest and established models = 0.158042 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 43 components and 0.158042 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.048690Jy sigma=1.175403 ! Fit after self-cal, rms=0.048677Jy sigma=1.174995 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.74654e-05 Jy ! Component: 100 - total flux cleaned = -3.72705e-05 Jy ! Component: 150 - total flux cleaned = -3.67503e-05 Jy ! Component: 200 - total flux cleaned = -3.55824e-05 Jy ! Total flux subtracted in 200 components = -3.55824e-05 Jy ! Clean residual min=-0.002672 max=0.002354 Jy/beam ! Clean residual mean=0.000008 rms=0.000680 Jy/beam ! Combined flux in latest and established models = 0.158007 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 44 components and 0.158007 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.048678Jy sigma=1.175077 ! Fit after self-cal, rms=0.048672Jy sigma=1.174811 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.617 mas, bmaj=5.358 mas, bpa=-31.08 degrees ! Estimated noise=0.547039 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.617 x 5.358 at -31.08 degrees (North through East) ! Clean map min=-0.0025198 max=0.14002 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.864 mas, bmaj=4.74 mas, bpa=-34.24 degrees ! Estimated noise=0.860901 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.103129 Jy ! Component: 100 - total flux cleaned = 0.128833 Jy ! Component: 150 - total flux cleaned = 0.141361 Jy ! Component: 200 - total flux cleaned = 0.148289 Jy ! Total flux subtracted in 200 components = 0.148289 Jy ! Clean residual min=-0.006007 max=0.004546 Jy/beam ! Clean residual mean=0.000002 rms=0.001290 Jy/beam ! Combined flux in latest and established models = 0.148289 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.148289 Jy ! Inverting map and beam ! Estimated beam: bmin=3.617 mas, bmaj=5.358 mas, bpa=-31.08 degrees ! Estimated noise=0.547039 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00584564 Jy ! Component: 100 - total flux cleaned = 0.0086919 Jy ! Component: 150 - total flux cleaned = 0.00926784 Jy ! Component: 200 - total flux cleaned = 0.00942582 Jy ! Total flux subtracted in 200 components = 0.00942582 Jy ! Clean residual min=-0.003218 max=0.002507 Jy/beam ! Clean residual mean=0.000004 rms=0.000681 Jy/beam ! Combined flux in latest and established models = 0.157715 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 29 components and 0.157715 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.188 mas, bmaj=11.48 mas, bpa=-24.76 degrees ! Estimated noise=0.659185 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00067686 Jy ! Component: 100 - total flux cleaned = 0.000754711 Jy ! Component: 150 - total flux cleaned = 0.00081043 Jy ! Component: 200 - total flux cleaned = 0.000793651 Jy ! Total flux subtracted in 200 components = 0.000793651 Jy ! Clean residual min=-0.002816 max=0.002421 Jy/beam ! Clean residual mean=0.000008 rms=0.000707 Jy/beam ! Combined flux in latest and established models = 0.158508 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.25842e-05 Jy ! Component: 100 - total flux cleaned = -6.3051e-05 Jy ! Component: 150 - total flux cleaned = -9.14074e-05 Jy ! Component: 200 - total flux cleaned = -0.000118283 Jy ! Total flux subtracted in 200 components = -0.000118283 Jy ! Clean residual min=-0.002751 max=0.002399 Jy/beam ! Clean residual mean=0.000008 rms=0.000696 Jy/beam ! Combined flux in latest and established models = 0.15839 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 39 components and 0.15839 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.617 mas, bmaj=5.358 mas, bpa=-31.08 degrees ! Estimated noise=0.547039 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.45193e-05 Jy ! Component: 100 - total flux cleaned = -0.000106487 Jy ! Component: 150 - total flux cleaned = -0.000151741 Jy ! Component: 200 - total flux cleaned = -0.000209257 Jy ! Total flux subtracted in 200 components = -0.000209257 Jy ! Clean residual min=-0.002637 max=0.002534 Jy/beam ! Clean residual mean=0.000004 rms=0.000624 Jy/beam ! Combined flux in latest and established models = 0.158181 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 45 components and 0.158181 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.048671Jy sigma=1.175157 ! Fit after self-cal, rms=0.048670Jy sigma=1.175139 wmodel /J0140+4342_S_map.mod ! wmodel: Unable to open new model file: /J0140+4342_S_map.mod ! Error occured in command: wmodel ![Exited script file: /opt64/bin/pima_mupet_01.dfm] ! wmap /scr/pima/bg219a_uvs/J0140+4342_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.617 x 5.358 at -31.08 degrees (North through East) ! Clean map min=-0.0025208 max=0.13933 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J0140+4342_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.139326 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000623389 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.3423 1.3423 2.68459 5.36918 10.7384 21.4767 42.9535 85.9069 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.139 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 223.497 quit ! Quitting program ! Log file /scr/pima/bg219a_uvs/J0140+4342_S_dfm.log closed on Thu May 19 23:47:16 2016