! Started logfile: /scr/pima/bg219a_uvs/J0059+5812_X_dfm.log on Thu May 19 23:46:05 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219a_uvs/J0059+5812_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J0059+5812_X_uva.fits
! AN table 1: 47 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.62614 visibilities/baseline/integration-bin.
! Found source: J0059+5812
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 7416 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0059+5812_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 77 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 77 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 77 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 77 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 77 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 77 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.058534Jy  sigma=27.999726
! Fit after  self-cal, rms=0.739188Jy  sigma=19.137253
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6771 mas, bmaj=0.875 mas, bpa=-69.94 degrees
! Estimated noise=0.782129 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.201821 Jy
! Component: 100  -  total flux cleaned = 0.277074 Jy
! Total flux subtracted in 100 components = 0.277074 Jy
! Clean residual min=-0.015107 max=0.029819 Jy/beam
! Clean residual mean=-0.000025 rms=0.004272 Jy/beam
! Combined flux in latest and established models = 0.277074 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.277074 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.098762Jy  sigma=2.004345
! Fit after  self-cal, rms=0.098068Jy  sigma=1.991327
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0310255 Jy
! Component: 100  -  total flux cleaned = 0.0469448 Jy
! Total flux subtracted in 100 components = 0.0469448 Jy
! Clean residual min=-0.008436 max=0.012184 Jy/beam
! Clean residual mean=-0.000011 rms=0.002051 Jy/beam
! Combined flux in latest and established models = 0.324019 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 9 components and 0.324019 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085757Jy  sigma=1.422758
! Fit after  self-cal, rms=0.085720Jy  sigma=1.421740
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8985 mas, bmaj=1.16 mas, bpa=-71.42 degrees
! Estimated noise=0.340029 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0135616 Jy
! Component: 100  -  total flux cleaned = 0.0197147 Jy
! Component: 150  -  total flux cleaned = 0.0230091 Jy
! Component: 200  -  total flux cleaned = 0.0249562 Jy
! Total flux subtracted in 200 components = 0.0249562 Jy
! Clean residual min=-0.004925 max=0.008681 Jy/beam
! Clean residual mean=-0.000022 rms=0.001411 Jy/beam
! Combined flux in latest and established models = 0.348975 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 16 components and 0.348975 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.084235Jy  sigma=1.321844
! Fit after  self-cal, rms=0.084223Jy  sigma=1.321479
! Inverting map 
! Added new window around map position (-9, -3.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00801563 Jy
! Component: 100  -  total flux cleaned = 0.00968946 Jy
! Component: 150  -  total flux cleaned = 0.0105546 Jy
! Component: 200  -  total flux cleaned = 0.0109016 Jy
! Total flux subtracted in 200 components = 0.0109016 Jy
! Clean residual min=-0.003906 max=0.004363 Jy/beam
! Clean residual mean=-0.000015 rms=0.000964 Jy/beam
! Combined flux in latest and established models = 0.359877 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 29 components and 0.359877 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.083372Jy  sigma=1.291523
! Fit after  self-cal, rms=0.083359Jy  sigma=1.288274
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8985 x 1.16 at -71.42 degrees (North through East)
! Clean map  min=-0.0031697  max=0.26651 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   KP        1.17     LA        0.99     MK        1.04     NL        1.02     
!   OV        1.00     PT        1.00     SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   KP        0.96     LA        0.99     MK        1.05     NL        1.02     
!   OV        1.00     PT        0.97     SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   KP        0.95     LA        1.01     MK        1.05     NL        1.01     
!   OV        0.98     PT        1.01     SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   KP        1.12     LA        0.99     MK        1.04     NL        1.01     
!   OV        0.99     PT        0.99     SC        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   KP        1.00*    LA        0.99     MK        1.02     NL        1.03     
!   OV        0.99     PT        0.99     SC        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   KP        1.00*    LA        1.00     MK        1.04     NL        1.02     
!   OV        0.97     PT        0.99     SC        0.99     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   KP        1.00*    LA        0.99     MK        1.04     NL        1.02     
!   OV        0.99     PT        0.99     SC        1.00     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   KP        1.00*    LA        0.99     MK        1.04     NL        1.01     
!   OV        0.97     PT        1.00     SC        1.00     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   KP        1.00*    LA        0.97     MK        1.07     NL        1.02     
!   OV        0.99     PT        0.98     SC        1.00     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   KP        1.00*    LA        0.99     MK        1.03     NL        1.02     
!   OV        0.99     PT        0.99     SC        0.97     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   KP        0.97     LA        0.98     MK        1.05     NL        0.99     
!   OV        0.99     PT        0.99     SC        1.00     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   KP        1.00*    LA        1.00*    MK        1.00*    NL        1.00*    
!   OV        1.00*    PT        1.00*    SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.083359Jy  sigma=1.288274
! Fit after  self-cal, rms=0.083899Jy  sigma=1.275619
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9053 mas, bmaj=1.166 mas, bpa=-72.08 degrees
! Estimated noise=0.342094 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000262564 Jy
! Component: 100  -  total flux cleaned = -0.000178634 Jy
! Component: 150  -  total flux cleaned = -0.000238809 Jy
! Component: 200  -  total flux cleaned = -0.000293925 Jy
! Total flux subtracted in 200 components = -0.000293925 Jy
! Clean residual min=-0.002561 max=0.003144 Jy/beam
! Clean residual mean=-0.000008 rms=0.000592 Jy/beam
! Combined flux in latest and established models = 0.359583 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 39 components and 0.359583 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.083868Jy  sigma=1.274176
! Fit after  self-cal, rms=0.083864Jy  sigma=1.274027
! Inverting map 
! Added new window around map position (-7.8, 6.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00208976 Jy
! Component: 100  -  total flux cleaned = 0.00243094 Jy
! Component: 150  -  total flux cleaned = 0.00290073 Jy
! Component: 200  -  total flux cleaned = 0.00303515 Jy
! Total flux subtracted in 200 components = 0.00303515 Jy
! Clean residual min=-0.002429 max=0.002095 Jy/beam
! Clean residual mean=-0.000005 rms=0.000461 Jy/beam
! Combined flux in latest and established models = 0.362618 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 54 components and 0.362618 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.083773Jy  sigma=1.270584
! Fit after  self-cal, rms=0.083810Jy  sigma=1.270310
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.083810Jy  sigma=1.270310
! Fit after  self-cal, rms=0.083526Jy  sigma=1.265861
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9039 mas, bmaj=1.165 mas, bpa=-71.65 degrees
! Estimated noise=0.341199 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000514727 Jy
! Component: 100  -  total flux cleaned = 0.000604012 Jy
! Component: 150  -  total flux cleaned = 0.000627356 Jy
! Component: 200  -  total flux cleaned = 0.000628 Jy
! Total flux subtracted in 200 components = 0.000628 Jy
! Clean residual min=-0.002092 max=0.001527 Jy/beam
! Clean residual mean=-0.000003 rms=0.000378 Jy/beam
! Combined flux in latest and established models = 0.363246 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 69 components and 0.363246 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.083507Jy  sigma=1.265166
! Fit after  self-cal, rms=0.083519Jy  sigma=1.265110
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000157861 Jy
! Component: 100  -  total flux cleaned = 0.000237523 Jy
! Component: 150  -  total flux cleaned = 0.000292602 Jy
! Component: 200  -  total flux cleaned = 0.000327164 Jy
! Total flux subtracted in 200 components = 0.000327164 Jy
! Clean residual min=-0.002023 max=0.001533 Jy/beam
! Clean residual mean=-0.000003 rms=0.000366 Jy/beam
! Combined flux in latest and established models = 0.363573 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 73 components and 0.363573 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.083509Jy  sigma=1.264809
! Fit after  self-cal, rms=0.083508Jy  sigma=1.264792
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.083508Jy  sigma=1.264792
! Fit after  self-cal, rms=0.083404Jy  sigma=1.265039
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9046 mas, bmaj=1.166 mas, bpa=-71.67 degrees
! Estimated noise=0.340912 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000264035 Jy
! Component: 100  -  total flux cleaned = -0.00042081 Jy
! Component: 150  -  total flux cleaned = -0.000560877 Jy
! Component: 200  -  total flux cleaned = -0.000633946 Jy
! Total flux subtracted in 200 components = -0.000633946 Jy
! Clean residual min=-0.001903 max=0.001529 Jy/beam
! Clean residual mean=0.000001 rms=0.000350 Jy/beam
! Combined flux in latest and established models = 0.362939 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 83 components and 0.362939 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.083393Jy  sigma=1.264640
! Fit after  self-cal, rms=0.083390Jy  sigma=1.264619
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000118066 Jy
! Component: 100  -  total flux cleaned = 8.49047e-05 Jy
! Component: 150  -  total flux cleaned = 6.9949e-05 Jy
! Component: 200  -  total flux cleaned = 2.57525e-05 Jy
! Total flux subtracted in 200 components = 2.57525e-05 Jy
! Clean residual min=-0.001857 max=0.001527 Jy/beam
! Clean residual mean=0.000001 rms=0.000341 Jy/beam
! Combined flux in latest and established models = 0.362965 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 87 components and 0.362965 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.083383Jy  sigma=1.264410
! Fit after  self-cal, rms=0.083380Jy  sigma=1.264400
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.083380Jy  sigma=1.264400
! Fit after  self-cal, rms=0.084901Jy  sigma=1.263217
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.051 mas, bmaj=2.688 mas, bpa=-75.47 degrees
! Estimated noise=0.443986 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000867847 Jy
! Component: 100  -  total flux cleaned = -0.0011371 Jy
! Component: 150  -  total flux cleaned = -0.0013129 Jy
! Component: 200  -  total flux cleaned = -0.00144976 Jy
! Total flux subtracted in 200 components = -0.00144976 Jy
! Clean residual min=-0.001020 max=0.001059 Jy/beam
! Clean residual mean=0.000002 rms=0.000281 Jy/beam
! Combined flux in latest and established models = 0.361515 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 100 components and 0.361515 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.084900Jy  sigma=1.263131
! Fit after  self-cal, rms=0.084846Jy  sigma=1.263087
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000260194 Jy
! Component: 100  -  total flux cleaned = -0.00036274 Jy
! Component: 150  -  total flux cleaned = -0.000438267 Jy
! Component: 200  -  total flux cleaned = -0.000466647 Jy
! Total flux subtracted in 200 components = -0.000466647 Jy
! Clean residual min=-0.000996 max=0.000975 Jy/beam
! Clean residual mean=0.000001 rms=0.000264 Jy/beam
! Combined flux in latest and established models = 0.361049 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 103 components and 0.361049 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.084846Jy  sigma=1.263091
! Fit after  self-cal, rms=0.084841Jy  sigma=1.263075
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9056 mas, bmaj=1.167 mas, bpa=-71.61 degrees
! Estimated noise=0.340817 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9056 x 1.167 at -71.61 degrees (North through East)
! Clean map  min=-0.0018034  max=0.26693 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6813 mas, bmaj=0.8793 mas, bpa=-69.93 degrees
! Estimated noise=0.790876 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.204086 Jy
! Component: 100  -  total flux cleaned = 0.280329 Jy
! Component: 150  -  total flux cleaned = 0.310316 Jy
! Component: 200  -  total flux cleaned = 0.325236 Jy
! Total flux subtracted in 200 components = 0.325236 Jy
! Clean residual min=-0.007657 max=0.009235 Jy/beam
! Clean residual mean=-0.000009 rms=0.001757 Jy/beam
! Combined flux in latest and established models = 0.325236 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.325236 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9056 mas, bmaj=1.167 mas, bpa=-71.61 degrees
! Estimated noise=0.340817 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0127531 Jy
! Component: 100  -  total flux cleaned = 0.019641 Jy
! Component: 150  -  total flux cleaned = 0.0242243 Jy
! Component: 200  -  total flux cleaned = 0.027508 Jy
! Total flux subtracted in 200 components = 0.027508 Jy
! Clean residual min=-0.003108 max=0.003159 Jy/beam
! Clean residual mean=-0.000011 rms=0.000725 Jy/beam
! Combined flux in latest and established models = 0.352744 Jy
! Adding 19 model components to the UV plane model.
! The established model now contains 27 components and 0.352744 Jy
! Inverting map 
! Added new window around map position (37.2, 24.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00290721 Jy
! Component: 100  -  total flux cleaned = 0.00443086 Jy
! Component: 150  -  total flux cleaned = 0.00548572 Jy
! Component: 200  -  total flux cleaned = 0.00621975 Jy
! Total flux subtracted in 200 components = 0.00621975 Jy
! Clean residual min=-0.002334 max=0.001983 Jy/beam
! Clean residual mean=-0.000003 rms=0.000475 Jy/beam
! Combined flux in latest and established models = 0.358963 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 47 components and 0.358963 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.051 mas, bmaj=2.688 mas, bpa=-75.47 degrees
! Estimated noise=0.443986 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00131286 Jy
! Component: 100  -  total flux cleaned = 0.00150577 Jy
! Component: 150  -  total flux cleaned = 0.00177213 Jy
! Component: 200  -  total flux cleaned = 0.00193378 Jy
! Total flux subtracted in 200 components = 0.00193378 Jy
! Clean residual min=-0.001244 max=0.001289 Jy/beam
! Clean residual mean=-0.000002 rms=0.000365 Jy/beam
! Combined flux in latest and established models = 0.360897 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.47032e-08 Jy
! Component: 100  -  total flux cleaned = 5.06365e-05 Jy
! Component: 150  -  total flux cleaned = 9.58493e-05 Jy
! Component: 200  -  total flux cleaned = 9.81751e-05 Jy
! Total flux subtracted in 200 components = 9.81751e-05 Jy
! Clean residual min=-0.001096 max=0.001113 Jy/beam
! Clean residual mean=-0.000001 rms=0.000307 Jy/beam
! Combined flux in latest and established models = 0.360995 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 68 components and 0.360995 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9056 mas, bmaj=1.167 mas, bpa=-71.61 degrees
! Estimated noise=0.340817 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000161452 Jy
! Component: 100  -  total flux cleaned = 1.97375e-05 Jy
! Component: 150  -  total flux cleaned = 1.94386e-05 Jy
! Component: 200  -  total flux cleaned = -3.64497e-05 Jy
! Total flux subtracted in 200 components = -3.64497e-05 Jy
! Clean residual min=-0.001854 max=0.001784 Jy/beam
! Clean residual mean=-0.000001 rms=0.000350 Jy/beam
! Combined flux in latest and established models = 0.360959 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 83 components and 0.360959 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.084861Jy  sigma=1.263500
! Fit after  self-cal, rms=0.084868Jy  sigma=1.263200
wmodel /J0059+5812_X_map.mod
! wmodel: Unable to open new model file: /J0059+5812_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J0059+5812_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9056 x 1.167 at -71.61 degrees (North through East)
! Clean map  min=-0.001577  max=0.26733 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J0059+5812_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.267327 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00034225 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.38408 0.38408 0.768159 1.53632 3.07264 6.14528 12.2906 24.5811 49.1622 98.3244
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.267 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  781.087 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J0059+5812_X_dfm.log closed on Thu May 19 23:46:08 2016