! Started logfile: /scr/pima/bg219a_uvs/J0050-0929_S_uvs.log on Wed Apr  6 22:40:04 2016
obs /scr/pima/bg219a_uvs/J0050-0929_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J0050-0929_S_uva.fits
! AN table 1: 9 integrations on 15 of 15 possible baselines.
! Apparent sampling: 1 visibilities/baseline/integration-bin.
! Found source: J0050-0929
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 49 lines of history.
! 
! Reading 540 visibilities.
select rr, 1,2,3,4,6,7,8 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219a_uvs/J0050-0929_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.133054Jy  sigma=21.963446
! Fit after  self-cal, rms=0.510929Jy  sigma=9.696977
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.358 mas, bmaj=6.326 mas, bpa=-0.2893 degrees
! Estimated noise=1.96898 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.378317 Jy
! Component: 100  -  total flux cleaned = 0.461575 Jy
! Total flux subtracted in 100 components = 0.461575 Jy
! Clean residual min=-0.015932 max=0.027479 Jy/beam
! Clean residual mean=0.000026 rms=0.006069 Jy/beam
! Combined flux in latest and established models = 0.461575 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.461575 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076497Jy  sigma=1.410224
! Fit after  self-cal, rms=0.076494Jy  sigma=1.410101
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.729 mas, bmaj=7.082 mas, bpa=0.344 degrees
! Estimated noise=1.72465 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0353321 Jy
! Component: 100  -  total flux cleaned = 0.050684 Jy
! Component: 150  -  total flux cleaned = 0.05881 Jy
! Component: 200  -  total flux cleaned = 0.0635241 Jy
! Total flux subtracted in 200 components = 0.0635241 Jy
! Clean residual min=-0.007660 max=0.008383 Jy/beam
! Clean residual mean=-0.000006 rms=0.002267 Jy/beam
! Combined flux in latest and established models = 0.525099 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 37 components and 0.525099 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061028Jy  sigma=1.079654
! Fit after  self-cal, rms=0.061022Jy  sigma=1.079376
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.729 x 7.082 at 0.344 degrees (North through East)
! Clean map  min=-0.0072783  max=0.4892 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        1.02     NL        0.96     OV        1.04     
!   PT        1.00     SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        0.98     NL        0.99     OV        1.02     
!   PT        1.00     SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.01     MK        1.02     NL        0.99     OV        1.00     
!   PT        1.00     SC        0.98     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        1.01     NL        0.96     OV        1.00     
!   PT        0.99     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.061022Jy  sigma=1.079376
! Fit after  self-cal, rms=0.059606Jy  sigma=1.053250
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.736 mas, bmaj=7.083 mas, bpa=0.3598 degrees
! Estimated noise=1.71822 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000750787 Jy
! Component: 100  -  total flux cleaned = 0.000709708 Jy
! Component: 150  -  total flux cleaned = 0.000709122 Jy
! Component: 200  -  total flux cleaned = 0.000708231 Jy
! Total flux subtracted in 200 components = 0.000708231 Jy
! Clean residual min=-0.007086 max=0.007081 Jy/beam
! Clean residual mean=-0.000004 rms=0.001792 Jy/beam
! Combined flux in latest and established models = 0.525807 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 47 components and 0.525807 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059550Jy  sigma=1.052521
! Fit after  self-cal, rms=0.059547Jy  sigma=1.052467
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059547Jy  sigma=1.052467
! Fit after  self-cal, rms=0.059502Jy  sigma=1.052400
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.735 mas, bmaj=7.079 mas, bpa=0.3886 degrees
! Estimated noise=1.71792 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000584526 Jy
! Component: 100  -  total flux cleaned = 0.000612523 Jy
! Component: 150  -  total flux cleaned = 0.000665141 Jy
! Component: 200  -  total flux cleaned = 0.000689825 Jy
! Total flux subtracted in 200 components = 0.000689825 Jy
! Clean residual min=-0.006995 max=0.007137 Jy/beam
! Clean residual mean=-0.000004 rms=0.001783 Jy/beam
! Combined flux in latest and established models = 0.526497 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 50 components and 0.526497 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059469Jy  sigma=1.052013
! Fit after  self-cal, rms=0.059468Jy  sigma=1.051991
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000141723 Jy
! Component: 100  -  total flux cleaned = 0.000117104 Jy
! Component: 150  -  total flux cleaned = 0.000138612 Jy
! Component: 200  -  total flux cleaned = 0.000159157 Jy
! Total flux subtracted in 200 components = 0.000159157 Jy
! Clean residual min=-0.006912 max=0.007169 Jy/beam
! Clean residual mean=-0.000004 rms=0.001775 Jy/beam
! Combined flux in latest and established models = 0.526656 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 50 components and 0.526656 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059451Jy  sigma=1.051720
! Fit after  self-cal, rms=0.059450Jy  sigma=1.051702
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059450Jy  sigma=1.051702
! Fit after  self-cal, rms=0.059427Jy  sigma=1.051638
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.734 mas, bmaj=7.076 mas, bpa=0.4199 degrees
! Estimated noise=1.71811 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000579579 Jy
! Component: 100  -  total flux cleaned = 0.000620083 Jy
! Component: 150  -  total flux cleaned = 0.000638458 Jy
! Component: 200  -  total flux cleaned = 0.000673623 Jy
! Total flux subtracted in 200 components = 0.000673623 Jy
! Clean residual min=-0.006829 max=0.007198 Jy/beam
! Clean residual mean=-0.000004 rms=0.001769 Jy/beam
! Combined flux in latest and established models = 0.52733 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 50 components and 0.52733 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059406Jy  sigma=1.051450
! Fit after  self-cal, rms=0.059406Jy  sigma=1.051439
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.47073e-05 Jy
! Component: 100  -  total flux cleaned = 6.46692e-05 Jy
! Component: 150  -  total flux cleaned = 9.69088e-05 Jy
! Component: 200  -  total flux cleaned = 0.000111755 Jy
! Total flux subtracted in 200 components = 0.000111755 Jy
! Clean residual min=-0.006777 max=0.007218 Jy/beam
! Clean residual mean=-0.000004 rms=0.001764 Jy/beam
! Combined flux in latest and established models = 0.527441 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 53 components and 0.527441 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059396Jy  sigma=1.051300
! Fit after  self-cal, rms=0.059397Jy  sigma=1.051294
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059397Jy  sigma=1.051294
! Fit after  self-cal, rms=0.059394Jy  sigma=1.051237
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.499 mas, bmaj=17.03 mas, bpa=3.002 degrees
! Estimated noise=2.30847 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00127514 Jy
! Component: 100  -  total flux cleaned = 0.00132563 Jy
! Component: 150  -  total flux cleaned = 0.00137069 Jy
! Component: 200  -  total flux cleaned = 0.00139125 Jy
! Total flux subtracted in 200 components = 0.00139125 Jy
! Clean residual min=-0.005837 max=0.007031 Jy/beam
! Clean residual mean=-0.000009 rms=0.002440 Jy/beam
! Combined flux in latest and established models = 0.528833 Jy
selfcal
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 57 components and 0.528833 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059392Jy  sigma=1.051258
! Fit after  self-cal, rms=0.059392Jy  sigma=1.051171
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.11322e-05 Jy
! Component: 100  -  total flux cleaned = 0.000110609 Jy
! Component: 150  -  total flux cleaned = 0.000155596 Jy
! Component: 200  -  total flux cleaned = 0.000176393 Jy
! Total flux subtracted in 200 components = 0.000176393 Jy
! Clean residual min=-0.005803 max=0.007015 Jy/beam
! Clean residual mean=-0.000009 rms=0.002426 Jy/beam
! Combined flux in latest and established models = 0.529009 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 62 components and 0.529009 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059401Jy  sigma=1.051226
! Fit after  self-cal, rms=0.059400Jy  sigma=1.051182
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.733 mas, bmaj=7.073 mas, bpa=0.4488 degrees
! Estimated noise=1.7187 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.733 x 7.073 at 0.4488 degrees (North through East)
! Clean map  min=-0.0061718  max=0.4848 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.363 mas, bmaj=6.319 mas, bpa=-0.1773 degrees
! Estimated noise=1.96129 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.376824 Jy
! Component: 100  -  total flux cleaned = 0.45938 Jy
! Component: 150  -  total flux cleaned = 0.486682 Jy
! Component: 200  -  total flux cleaned = 0.500356 Jy
! Total flux subtracted in 200 components = 0.500356 Jy
! Clean residual min=-0.010325 max=0.008307 Jy/beam
! Clean residual mean=0.000009 rms=0.002646 Jy/beam
! Combined flux in latest and established models = 0.500356 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.500356 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.733 mas, bmaj=7.073 mas, bpa=0.4488 degrees
! Estimated noise=1.7187 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0123595 Jy
! Component: 100  -  total flux cleaned = 0.0189542 Jy
! Component: 150  -  total flux cleaned = 0.0226998 Jy
! Component: 200  -  total flux cleaned = 0.0249028 Jy
! Total flux subtracted in 200 components = 0.0249028 Jy
! Clean residual min=-0.007176 max=0.006887 Jy/beam
! Clean residual mean=-0.000002 rms=0.001806 Jy/beam
! Combined flux in latest and established models = 0.525259 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 48 components and 0.525259 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.499 mas, bmaj=17.03 mas, bpa=3.002 degrees
! Estimated noise=2.30847 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00257885 Jy
! Component: 100  -  total flux cleaned = 0.00330495 Jy
! Component: 150  -  total flux cleaned = 0.00334397 Jy
! Component: 200  -  total flux cleaned = 0.00337848 Jy
! Total flux subtracted in 200 components = 0.00337848 Jy
! Clean residual min=-0.005868 max=0.007154 Jy/beam
! Clean residual mean=-0.000009 rms=0.002444 Jy/beam
! Combined flux in latest and established models = 0.528637 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.1404e-05 Jy
! Component: 100  -  total flux cleaned = 7.48458e-05 Jy
! Component: 150  -  total flux cleaned = 0.000102459 Jy
! Component: 200  -  total flux cleaned = 0.000140362 Jy
! Total flux subtracted in 200 components = 0.000140362 Jy
! Clean residual min=-0.005817 max=0.007184 Jy/beam
! Clean residual mean=-0.000009 rms=0.002431 Jy/beam
! Combined flux in latest and established models = 0.528778 Jy
! Adding 8 model components to the UV plane model.
! The established model now contains 52 components and 0.528778 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.733 mas, bmaj=7.073 mas, bpa=0.4488 degrees
! Estimated noise=1.7187 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000675273 Jy
! Component: 100  -  total flux cleaned = -0.000583264 Jy
! Component: 150  -  total flux cleaned = -0.000510712 Jy
! Component: 200  -  total flux cleaned = -0.000472161 Jy
! Total flux subtracted in 200 components = -0.000472161 Jy
! Clean residual min=-0.006786 max=0.007200 Jy/beam
! Clean residual mean=-0.000004 rms=0.001768 Jy/beam
! Combined flux in latest and established models = 0.528306 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 59 components and 0.528306 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059396Jy  sigma=1.051279
! Fit after  self-cal, rms=0.059400Jy  sigma=1.051239
wmodel /scr/pima/bg219a_uvs/J0050-0929_S_map.mod
! Writing 59 model components to file: /scr/pima/bg219a_uvs/J0050-0929_S_map.mod
wobs /scr/pima/bg219a_uvs/J0050-0929_S_uvs.fits
! Writing UV FITS file: /scr/pima/bg219a_uvs/J0050-0929_S_uvs.fits
wwins /scr/pima/bg219a_uvs/J0050-0929_S_map.win
! wwins: Wrote 1 windows to /scr/pima/bg219a_uvs/J0050-0929_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000932269 Jy
! Component: 100  -  total flux cleaned = 0.000508534 Jy
! Component: 150  -  total flux cleaned = 0.000503528 Jy
! Component: 200  -  total flux cleaned = 0.000586099 Jy
! Component: 250  -  total flux cleaned = 0.000822434 Jy
! Component: 300  -  total flux cleaned = 0.00126802 Jy
! Component: 350  -  total flux cleaned = 0.00168735 Jy
! Component: 400  -  total flux cleaned = 0.0019505 Jy
! Component: 450  -  total flux cleaned = 0.00213618 Jy
! Component: 500  -  total flux cleaned = 0.00219408 Jy
! Component: 550  -  total flux cleaned = 0.00224991 Jy
! Component: 600  -  total flux cleaned = 0.00225104 Jy
! Component: 650  -  total flux cleaned = 0.00229905 Jy
! Component: 700  -  total flux cleaned = 0.00262867 Jy
! Component: 750  -  total flux cleaned = 0.00281076 Jy
! Component: 800  -  total flux cleaned = 0.00294392 Jy
! Component: 850  -  total flux cleaned = 0.00294485 Jy
! Component: 900  -  total flux cleaned = 0.00311144 Jy
! Component: 950  -  total flux cleaned = 0.0030289 Jy
! Component: 1000  -  total flux cleaned = 0.00302938 Jy
! Component: 1050  -  total flux cleaned = 0.00291362 Jy
! Component: 1100  -  total flux cleaned = 0.00253602 Jy
! Component: 1150  -  total flux cleaned = 0.00216387 Jy
! Component: 1200  -  total flux cleaned = 0.0017613 Jy
! Component: 1250  -  total flux cleaned = 0.0013639 Jy
! Component: 1300  -  total flux cleaned = 0.000970772 Jy
! Component: 1350  -  total flux cleaned = 0.000476683 Jy
! Component: 1400  -  total flux cleaned = 2.2742e-05 Jy
! Component: 1450  -  total flux cleaned = -0.000427413 Jy
! Component: 1500  -  total flux cleaned = -0.00087392 Jy
! Component: 1550  -  total flux cleaned = -0.00131725 Jy
! Component: 1600  -  total flux cleaned = -0.00158877 Jy
! Component: 1650  -  total flux cleaned = -0.00179252 Jy
! Component: 1700  -  total flux cleaned = -0.00192884 Jy
! Component: 1750  -  total flux cleaned = -0.00199733 Jy
! Component: 1800  -  total flux cleaned = -0.00213492 Jy
! Component: 1850  -  total flux cleaned = -0.00227331 Jy
! Component: 1900  -  total flux cleaned = -0.00237796 Jy
! Component: 1950  -  total flux cleaned = -0.00244776 Jy
! Component: 2000  -  total flux cleaned = -0.0025882 Jy
! Component: 2050  -  total flux cleaned = -0.00269458 Jy
! Component: 2100  -  total flux cleaned = -0.00283712 Jy
! Component: 2150  -  total flux cleaned = -0.00290889 Jy
! Component: 2200  -  total flux cleaned = -0.00301689 Jy
! Component: 2250  -  total flux cleaned = -0.00316173 Jy
! Component: 2300  -  total flux cleaned = -0.00327162 Jy
! Component: 2350  -  total flux cleaned = -0.0033455 Jy
! Component: 2400  -  total flux cleaned = -0.00345658 Jy
! Component: 2450  -  total flux cleaned = -0.00360636 Jy
! Component: 2500  -  total flux cleaned = -0.00371974 Jy
! Component: 2550  -  total flux cleaned = -0.00383373 Jy
! Component: 2600  -  total flux cleaned = -0.00391032 Jy
! Component: 2650  -  total flux cleaned = -0.00406496 Jy
! Component: 2700  -  total flux cleaned = -0.00410371 Jy
! Component: 2750  -  total flux cleaned = -0.00422271 Jy
! Component: 2800  -  total flux cleaned = -0.00426306 Jy
! Component: 2850  -  total flux cleaned = -0.0042228 Jy
! Component: 2900  -  total flux cleaned = -0.00430481 Jy
! Component: 2950  -  total flux cleaned = -0.00430522 Jy
! Component: 3000  -  total flux cleaned = -0.00422002 Jy
! Component: 3050  -  total flux cleaned = -0.00430569 Jy
! Component: 3100  -  total flux cleaned = -0.00430608 Jy
! Component: 3150  -  total flux cleaned = -0.00430635 Jy
! Component: 3200  -  total flux cleaned = -0.00426138 Jy
! Component: 3250  -  total flux cleaned = -0.0042159 Jy
! Component: 3300  -  total flux cleaned = -0.00421609 Jy
! Component: 3350  -  total flux cleaned = -0.00431034 Jy
! Component: 3400  -  total flux cleaned = -0.00445407 Jy
! Component: 3450  -  total flux cleaned = -0.00455208 Jy
! Component: 3500  -  total flux cleaned = -0.00465043 Jy
! Component: 3550  -  total flux cleaned = -0.00475123 Jy
! Component: 3600  -  total flux cleaned = -0.0049046 Jy
! Component: 3650  -  total flux cleaned = -0.0049561 Jy
! Component: 3700  -  total flux cleaned = -0.0051676 Jy
! Component: 3750  -  total flux cleaned = -0.0052761 Jy
! Component: 3800  -  total flux cleaned = -0.00538522 Jy
! Component: 3850  -  total flux cleaned = -0.00555284 Jy
! Component: 3900  -  total flux cleaned = -0.00566744 Jy
! Component: 3950  -  total flux cleaned = -0.0057842 Jy
! Component: 4000  -  total flux cleaned = -0.0057833 Jy
! Component: 4050  -  total flux cleaned = -0.00590532 Jy
! Total flux subtracted in 4096 components = -0.00602981 Jy
! Clean residual min=-0.003523 max=0.003451 Jy/beam
! Clean residual mean=-0.000003 rms=0.000917 Jy/beam
! Combined flux in latest and established models = 0.522276 Jy
keep
! Adding 184 model components to the UV plane model.
! The established model now contains 243 components and 0.522276 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219a_uvs/J0050-0929_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.733 x 7.073 at 0.4488 degrees (North through East)
! Clean map  min=-0.0053658  max=0.48614 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J0050-0929_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.486139 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000831067 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.512858 0.512858 1.02572 2.05143 4.10286 8.20573 16.4115 32.8229 65.6458
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0024 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.486 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  584.957 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J0050-0929_S_uvs.log closed on Wed Apr  6 22:40:08 2016