! Started logfile: /scr/pima/bg219a_uvs/J0044+6803_S_dfm.log on Thu May 19 23:45:27 2016 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /scr/pima/bg219a_uvs/J0044+6803_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219a_uvs/J0044+6803_S_uva.fits ! AN table 1: 21 integrations on 10 of 10 possible baselines. ! AN table 2: 20 integrations on 10 of 10 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J0044+6803 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 49 lines of history. ! ! Reading 1640 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0044+6803_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.019496Jy sigma=23.947245 ! Fit after self-cal, rms=0.875125Jy sigma=20.397363 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.313 mas, bmaj=8.218 mas, bpa=84.84 degrees ! Estimated noise=1.12669 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0980154 Jy ! Component: 100 - total flux cleaned = 0.121341 Jy ! Total flux subtracted in 100 components = 0.121341 Jy ! Clean residual min=-0.007555 max=0.008624 Jy/beam ! Clean residual mean=-0.000002 rms=0.001896 Jy/beam ! Combined flux in latest and established models = 0.121341 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.121341 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055556Jy sigma=1.199528 ! Fit after self-cal, rms=0.055596Jy sigma=1.199281 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.766 mas, bmaj=9.923 mas, bpa=84.32 degrees ! Estimated noise=0.771448 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00987905 Jy ! Component: 100 - total flux cleaned = 0.0142571 Jy ! Component: 150 - total flux cleaned = 0.0164558 Jy ! Component: 200 - total flux cleaned = 0.0171858 Jy ! Total flux subtracted in 200 components = 0.0171858 Jy ! Clean residual min=-0.004111 max=0.004024 Jy/beam ! Clean residual mean=-0.000005 rms=0.001079 Jy/beam ! Combined flux in latest and established models = 0.138527 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 26 components and 0.138527 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054016Jy sigma=1.159342 ! Fit after self-cal, rms=0.054089Jy sigma=1.159026 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.766 x 9.923 at 84.32 degrees (North through East) ! Clean map min=-0.0039221 max=0.12755 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! LA 1.07 MK 1.06 NL 1.00 OV 1.03 ! SC 0.88 ! ! Telescope amplitude corrections in sub-array 2: ! LA 0.94 MK 1.01 NL 0.96 OV 1.11 ! PT 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! LA 1.00 MK 0.98 NL 1.05 OV 1.05 ! SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! LA 0.91 MK 0.98 NL 0.95 OV 0.99 ! PT 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! LA 1.06 MK 1.03 NL 0.94 OV 0.99 ! SC 1.08 ! ! Telescope amplitude corrections in sub-array 2: ! LA 1.04 MK 1.00 NL 1.03 OV 0.95 ! PT 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! LA 0.96 MK 1.04 NL 1.02 OV 0.91 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! LA 1.02 MK 1.02 NL 0.95 OV 1.03 ! PT 1.02 ! ! ! Fit before self-cal, rms=0.054089Jy sigma=1.159026 ! Fit after self-cal, rms=0.053756Jy sigma=1.143284 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.766 mas, bmaj=9.914 mas, bpa=84.36 degrees ! Estimated noise=0.770845 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000483612 Jy ! Component: 100 - total flux cleaned = 0.000453456 Jy ! Component: 150 - total flux cleaned = 0.000378227 Jy ! Component: 200 - total flux cleaned = 0.000334231 Jy ! Total flux subtracted in 200 components = 0.000334231 Jy ! Clean residual min=-0.003284 max=0.003307 Jy/beam ! Clean residual mean=0.000000 rms=0.000788 Jy/beam ! Combined flux in latest and established models = 0.138861 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 35 components and 0.138861 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053719Jy sigma=1.142782 ! Fit after self-cal, rms=0.053753Jy sigma=1.142515 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053753Jy sigma=1.142515 ! Fit after self-cal, rms=0.053702Jy sigma=1.142376 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.76 mas, bmaj=9.89 mas, bpa=84.36 degrees ! Estimated noise=0.77199 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000458496 Jy ! Component: 100 - total flux cleaned = 0.000459463 Jy ! Component: 150 - total flux cleaned = 0.0003763 Jy ! Component: 200 - total flux cleaned = 0.000339164 Jy ! Total flux subtracted in 200 components = 0.000339164 Jy ! Clean residual min=-0.003258 max=0.003256 Jy/beam ! Clean residual mean=0.000000 rms=0.000770 Jy/beam ! Combined flux in latest and established models = 0.1392 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 36 components and 0.1392 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053676Jy sigma=1.142010 ! Fit after self-cal, rms=0.053681Jy sigma=1.142000 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.54931e-05 Jy ! Component: 100 - total flux cleaned = -8.79196e-05 Jy ! Component: 150 - total flux cleaned = -0.000133482 Jy ! Component: 200 - total flux cleaned = -0.000161205 Jy ! Total flux subtracted in 200 components = -0.000161205 Jy ! Clean residual min=-0.003272 max=0.003247 Jy/beam ! Clean residual mean=0.000000 rms=0.000766 Jy/beam ! Combined flux in latest and established models = 0.139039 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 37 components and 0.139039 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053672Jy sigma=1.141825 ! Fit after self-cal, rms=0.053678Jy sigma=1.141820 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053678Jy sigma=1.141820 ! Fit after self-cal, rms=0.053521Jy sigma=1.141656 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.753 mas, bmaj=9.862 mas, bpa=84.35 degrees ! Estimated noise=0.772433 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000438733 Jy ! Component: 100 - total flux cleaned = 0.000458044 Jy ! Component: 150 - total flux cleaned = 0.000424991 Jy ! Component: 200 - total flux cleaned = 0.000379097 Jy ! Total flux subtracted in 200 components = 0.000379097 Jy ! Clean residual min=-0.003226 max=0.003172 Jy/beam ! Clean residual mean=0.000000 rms=0.000748 Jy/beam ! Combined flux in latest and established models = 0.139418 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 37 components and 0.139418 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053505Jy sigma=1.141412 ! Fit after self-cal, rms=0.053505Jy sigma=1.141409 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.18169e-05 Jy ! Component: 100 - total flux cleaned = -6.83594e-05 Jy ! Component: 150 - total flux cleaned = -0.000104517 Jy ! Component: 200 - total flux cleaned = -0.000126935 Jy ! Total flux subtracted in 200 components = -0.000126935 Jy ! Clean residual min=-0.003235 max=0.003167 Jy/beam ! Clean residual mean=0.000000 rms=0.000746 Jy/beam ! Combined flux in latest and established models = 0.139291 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 38 components and 0.139291 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053500Jy sigma=1.141289 ! Fit after self-cal, rms=0.053504Jy sigma=1.141286 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053504Jy sigma=1.141286 ! Fit after self-cal, rms=0.053388Jy sigma=1.141176 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.399 mas, bmaj=19.99 mas, bpa=75.83 degrees ! Estimated noise=1.00164 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00019379 Jy ! Component: 100 - total flux cleaned = 0.000212019 Jy ! Component: 150 - total flux cleaned = 0.000210869 Jy ! Component: 200 - total flux cleaned = 0.000209492 Jy ! Total flux subtracted in 200 components = 0.000209492 Jy ! Clean residual min=-0.003079 max=0.003016 Jy/beam ! Clean residual mean=0.000001 rms=0.000986 Jy/beam ! Combined flux in latest and established models = 0.139501 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 43 components and 0.139501 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053392Jy sigma=1.141290 ! Fit after self-cal, rms=0.053382Jy sigma=1.141277 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.28564e-06 Jy ! Component: 100 - total flux cleaned = -1.04742e-05 Jy ! Component: 150 - total flux cleaned = -8.34029e-06 Jy ! Component: 200 - total flux cleaned = -5.39785e-06 Jy ! Total flux subtracted in 200 components = -5.39785e-06 Jy ! Clean residual min=-0.003046 max=0.002944 Jy/beam ! Clean residual mean=0.000001 rms=0.000968 Jy/beam ! Combined flux in latest and established models = 0.139495 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 46 components and 0.139495 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053394Jy sigma=1.141510 ! Fit after self-cal, rms=0.053390Jy sigma=1.141504 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.747 mas, bmaj=9.839 mas, bpa=84.36 degrees ! Estimated noise=0.772711 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.747 x 9.839 at 84.36 degrees (North through East) ! Clean map min=-0.0030402 max=0.12819 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.305 mas, bmaj=8.152 mas, bpa=84.98 degrees ! Estimated noise=1.11804 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0971369 Jy ! Component: 100 - total flux cleaned = 0.120546 Jy ! Component: 150 - total flux cleaned = 0.129479 Jy ! Component: 200 - total flux cleaned = 0.134446 Jy ! Total flux subtracted in 200 components = 0.134446 Jy ! Clean residual min=-0.004423 max=0.003669 Jy/beam ! Clean residual mean=-0.000000 rms=0.001061 Jy/beam ! Combined flux in latest and established models = 0.134446 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.134446 Jy ! Inverting map and beam ! Estimated beam: bmin=2.747 mas, bmaj=9.839 mas, bpa=84.36 degrees ! Estimated noise=0.772711 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00402506 Jy ! Component: 100 - total flux cleaned = 0.00552999 Jy ! Component: 150 - total flux cleaned = 0.00576076 Jy ! Component: 200 - total flux cleaned = 0.005718 Jy ! Total flux subtracted in 200 components = 0.005718 Jy ! Clean residual min=-0.003329 max=0.003040 Jy/beam ! Clean residual mean=0.000000 rms=0.000757 Jy/beam ! Combined flux in latest and established models = 0.140164 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 27 components and 0.140164 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.399 mas, bmaj=19.99 mas, bpa=75.83 degrees ! Estimated noise=1.00164 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000193948 Jy ! Component: 100 - total flux cleaned = -0.000322966 Jy ! Component: 150 - total flux cleaned = -0.000340959 Jy ! Component: 200 - total flux cleaned = -0.00035834 Jy ! Total flux subtracted in 200 components = -0.00035834 Jy ! Clean residual min=-0.003076 max=0.002898 Jy/beam ! Clean residual mean=0.000001 rms=0.000968 Jy/beam ! Combined flux in latest and established models = 0.139805 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.63174e-05 Jy ! Component: 100 - total flux cleaned = -1.74526e-05 Jy ! Component: 150 - total flux cleaned = -3.28211e-05 Jy ! Component: 200 - total flux cleaned = -3.31399e-05 Jy ! Total flux subtracted in 200 components = -3.31399e-05 Jy ! Clean residual min=-0.003009 max=0.002841 Jy/beam ! Clean residual mean=0.000001 rms=0.000949 Jy/beam ! Combined flux in latest and established models = 0.139772 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 44 components and 0.139772 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.747 mas, bmaj=9.839 mas, bpa=84.36 degrees ! Estimated noise=0.772711 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000339366 Jy ! Component: 100 - total flux cleaned = 0.000537886 Jy ! Component: 150 - total flux cleaned = 0.000511189 Jy ! Component: 200 - total flux cleaned = 0.000489935 Jy ! Total flux subtracted in 200 components = 0.000489935 Jy ! Clean residual min=-0.003197 max=0.003049 Jy/beam ! Clean residual mean=0.000000 rms=0.000734 Jy/beam ! Combined flux in latest and established models = 0.140262 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 56 components and 0.140262 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053379Jy sigma=1.141414 ! Fit after self-cal, rms=0.053385Jy sigma=1.141400 wmodel /J0044+6803_S_map.mod ! wmodel: Unable to open new model file: /J0044+6803_S_map.mod ! Error occured in command: wmodel ![Exited script file: /opt64/bin/pima_mupet_01.dfm] ! wmap /scr/pima/bg219a_uvs/J0044+6803_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.747 x 9.839 at 84.36 degrees (North through East) ! Clean map min=-0.0030343 max=0.12785 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J0044+6803_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.127854 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000734001 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.72228 1.72228 3.44455 6.88911 13.7782 27.5564 55.1128 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0022 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.127 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 174.188 quit ! Quitting program ! Log file /scr/pima/bg219a_uvs/J0044+6803_S_dfm.log closed on Thu May 19 23:45:29 2016