! Started logfile: /scr/pima/bg219a_uvs/J0037+3659_S_dfm.log on Thu May 19 23:45:06 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219a_uvs/J0037+3659_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J0037+3659_S_uva.fits
! AN table 1: 62 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.833333 visibilities/baseline/integration-bin.
! Found source: J0037+3659
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 49 lines of history.
! 
! Reading 3100 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0037+3659_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.007157Jy  sigma=27.196031
! Fit after  self-cal, rms=0.935918Jy  sigma=25.251183
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.686 mas, bmaj=5.384 mas, bpa=-15.07 degrees
! Estimated noise=0.942796 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.048002 Jy
! Component: 100  -  total flux cleaned = 0.0596694 Jy
! Total flux subtracted in 100 components = 0.0596694 Jy
! Clean residual min=-0.008159 max=0.008076 Jy/beam
! Clean residual mean=0.000026 rms=0.002079 Jy/beam
! Combined flux in latest and established models = 0.0596694 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.0596694 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055786Jy  sigma=1.385531
! Fit after  self-cal, rms=0.054954Jy  sigma=1.365881
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.417 mas, bmaj=6.406 mas, bpa=-11.3 degrees
! Estimated noise=0.507241 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00964755 Jy
! Component: 100  -  total flux cleaned = 0.0145208 Jy
! Component: 150  -  total flux cleaned = 0.0171789 Jy
! Component: 200  -  total flux cleaned = 0.0187312 Jy
! Total flux subtracted in 200 components = 0.0187312 Jy
! Clean residual min=-0.006647 max=0.008395 Jy/beam
! Clean residual mean=0.000012 rms=0.002318 Jy/beam
! Combined flux in latest and established models = 0.0784006 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 32 components and 0.0784006 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053470Jy  sigma=1.316216
! Fit after  self-cal, rms=0.053459Jy  sigma=1.315256
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.417 x 6.406 at -11.3 degrees (North through East)
! Clean map  min=-0.0066325  max=0.06454 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.92     MK        1.03     NL        1.19     OV        1.09     
!   PT        0.90     SC        1.04     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.91     MK        1.04     NL        1.17     OV        1.00     
!   PT        0.96     SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.92     MK        1.08     NL        1.05     OV        1.00     
!   PT        1.01     SC        0.94     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.90     MK        0.88     NL        1.05     OV        1.07     
!   PT        0.93     SC        1.02     
! 
! 
! Fit before self-cal, rms=0.053459Jy  sigma=1.315256
! Fit after  self-cal, rms=0.053196Jy  sigma=1.302811
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.423 mas, bmaj=6.457 mas, bpa=-11 degrees
! Estimated noise=0.507177 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.34488e-05 Jy
! Component: 100  -  total flux cleaned = 2.29683e-05 Jy
! Component: 150  -  total flux cleaned = 2.21417e-05 Jy
! Component: 200  -  total flux cleaned = 4.46656e-05 Jy
! Total flux subtracted in 200 components = 4.46656e-05 Jy
! Clean residual min=-0.006398 max=0.008806 Jy/beam
! Clean residual mean=0.000011 rms=0.002112 Jy/beam
! Combined flux in latest and established models = 0.0784453 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 41 components and 0.0784453 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053167Jy  sigma=1.302269
! Fit after  self-cal, rms=0.053270Jy  sigma=1.301287
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053270Jy  sigma=1.301287
! Fit after  self-cal, rms=0.053792Jy  sigma=1.288278
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.44 mas, bmaj=6.474 mas, bpa=-10.99 degrees
! Estimated noise=0.506535 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000360491 Jy
! Component: 100  -  total flux cleaned = 0.000327536 Jy
! Component: 150  -  total flux cleaned = 0.000303449 Jy
! Component: 200  -  total flux cleaned = 0.000324629 Jy
! Total flux subtracted in 200 components = 0.000324629 Jy
! Clean residual min=-0.006417 max=0.008403 Jy/beam
! Clean residual mean=-0.000001 rms=0.001903 Jy/beam
! Combined flux in latest and established models = 0.0787699 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 45 components and 0.0787699 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053757Jy  sigma=1.287631
! Fit after  self-cal, rms=0.053829Jy  sigma=1.287178
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (46.5, 106).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00711395 Jy
! Component: 100  -  total flux cleaned = 0.0104562 Jy
! Component: 150  -  total flux cleaned = 0.0127676 Jy
! Component: 200  -  total flux cleaned = 0.0145454 Jy
! Total flux subtracted in 200 components = 0.0145454 Jy
! Clean residual min=-0.004954 max=0.004816 Jy/beam
! Clean residual mean=0.000010 rms=0.001295 Jy/beam
! Combined flux in latest and established models = 0.0933153 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 78 components and 0.0933153 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052959Jy  sigma=1.257333
! Fit after  self-cal, rms=0.052811Jy  sigma=1.254672
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052811Jy  sigma=1.254672
! Fit after  self-cal, rms=0.052352Jy  sigma=1.248871
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.462 mas, bmaj=6.533 mas, bpa=-11.24 degrees
! Estimated noise=0.494512 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00314784 Jy
! Component: 100  -  total flux cleaned = 0.00496976 Jy
! Component: 150  -  total flux cleaned = 0.00563952 Jy
! Component: 200  -  total flux cleaned = 0.00623388 Jy
! Total flux subtracted in 200 components = 0.00623388 Jy
! Clean residual min=-0.003505 max=0.004660 Jy/beam
! Clean residual mean=0.000007 rms=0.000981 Jy/beam
! Combined flux in latest and established models = 0.0995492 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 96 components and 0.0995492 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052153Jy  sigma=1.242049
! Fit after  self-cal, rms=0.052144Jy  sigma=1.241237
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (7, -55).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00389261 Jy
! Component: 100  -  total flux cleaned = 0.00539895 Jy
! Component: 150  -  total flux cleaned = 0.00611123 Jy
! Component: 200  -  total flux cleaned = 0.00668468 Jy
! Total flux subtracted in 200 components = 0.00668468 Jy
! Clean residual min=-0.003061 max=0.002554 Jy/beam
! Clean residual mean=0.000005 rms=0.000714 Jy/beam
! Combined flux in latest and established models = 0.106234 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 117 components and 0.106234 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.051846Jy  sigma=1.231605
! Fit after  self-cal, rms=0.051721Jy  sigma=1.230712
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.051721Jy  sigma=1.230712
! Fit after  self-cal, rms=0.051599Jy  sigma=1.228966
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.689 mas, bmaj=14.07 mas, bpa=-12.13 degrees
! Estimated noise=0.554708 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00206325 Jy
! Component: 100  -  total flux cleaned = 0.00273674 Jy
! Component: 150  -  total flux cleaned = 0.0030616 Jy
! Component: 200  -  total flux cleaned = 0.00327003 Jy
! Total flux subtracted in 200 components = 0.00327003 Jy
! Clean residual min=-0.002933 max=0.002590 Jy/beam
! Clean residual mean=0.000006 rms=0.000724 Jy/beam
! Combined flux in latest and established models = 0.109504 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 141 components and 0.109504 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.051526Jy  sigma=1.226762
! Fit after  self-cal, rms=0.051536Jy  sigma=1.226446
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000819251 Jy
! Component: 100  -  total flux cleaned = 0.000973158 Jy
! Component: 150  -  total flux cleaned = 0.00114137 Jy
! Component: 200  -  total flux cleaned = 0.0013216 Jy
! Total flux subtracted in 200 components = 0.0013216 Jy
! Clean residual min=-0.002689 max=0.002444 Jy/beam
! Clean residual mean=0.000005 rms=0.000678 Jy/beam
! Combined flux in latest and established models = 0.110825 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 154 components and 0.110825 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.051513Jy  sigma=1.225956
! Fit after  self-cal, rms=0.051511Jy  sigma=1.225867
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.469 mas, bmaj=6.577 mas, bpa=-11.64 degrees
! Estimated noise=0.487364 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.469 x 6.577 at -11.64 degrees (North through East)
! Clean map  min=-0.0020464  max=0.064988 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.7 mas, bmaj=5.468 mas, bpa=-15.4 degrees
! Estimated noise=0.917467 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0472178 Jy
! Component: 100  -  total flux cleaned = 0.0598591 Jy
! Component: 150  -  total flux cleaned = 0.0662323 Jy
! Component: 200  -  total flux cleaned = 0.071051 Jy
! Total flux subtracted in 200 components = 0.071051 Jy
! Clean residual min=-0.006544 max=0.005768 Jy/beam
! Clean residual mean=0.000011 rms=0.001584 Jy/beam
! Combined flux in latest and established models = 0.071051 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 0.071051 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.469 mas, bmaj=6.577 mas, bpa=-11.64 degrees
! Estimated noise=0.487364 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00736942 Jy
! Component: 100  -  total flux cleaned = 0.012657 Jy
! Component: 150  -  total flux cleaned = 0.0169048 Jy
! Component: 200  -  total flux cleaned = 0.0203903 Jy
! Total flux subtracted in 200 components = 0.0203903 Jy
! Clean residual min=-0.004379 max=0.003453 Jy/beam
! Clean residual mean=0.000011 rms=0.001078 Jy/beam
! Combined flux in latest and established models = 0.0914413 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 50 components and 0.0914413 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.689 mas, bmaj=14.07 mas, bpa=-12.13 degrees
! Estimated noise=0.554708 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00441475 Jy
! Component: 100  -  total flux cleaned = 0.00767293 Jy
! Component: 150  -  total flux cleaned = 0.0102591 Jy
! Component: 200  -  total flux cleaned = 0.0123709 Jy
! Total flux subtracted in 200 components = 0.0123709 Jy
! Clean residual min=-0.004263 max=0.003170 Jy/beam
! Clean residual mean=0.000014 rms=0.001019 Jy/beam
! Combined flux in latest and established models = 0.103812 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00173646 Jy
! Component: 100  -  total flux cleaned = 0.00306523 Jy
! Component: 150  -  total flux cleaned = 0.0038067 Jy
! Component: 200  -  total flux cleaned = 0.00437124 Jy
! Total flux subtracted in 200 components = 0.00437124 Jy
! Clean residual min=-0.003396 max=0.002362 Jy/beam
! Clean residual mean=0.000011 rms=0.000771 Jy/beam
! Combined flux in latest and established models = 0.108183 Jy
! Adding 74 model components to the UV plane model.
! The established model now contains 114 components and 0.108183 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.469 mas, bmaj=6.577 mas, bpa=-11.64 degrees
! Estimated noise=0.487364 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000507039 Jy
! Component: 100  -  total flux cleaned = 0.00106735 Jy
! Component: 150  -  total flux cleaned = 0.00127569 Jy
! Component: 200  -  total flux cleaned = 0.00146849 Jy
! Total flux subtracted in 200 components = 0.00146849 Jy
! Clean residual min=-0.002451 max=0.002215 Jy/beam
! Clean residual mean=0.000002 rms=0.000572 Jy/beam
! Combined flux in latest and established models = 0.109652 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 135 components and 0.109652 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.051568Jy  sigma=1.226951
! Fit after  self-cal, rms=0.051554Jy  sigma=1.226304
wmodel /J0037+3659_S_map.mod
! wmodel: Unable to open new model file: /J0037+3659_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J0037+3659_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.469 x 6.577 at -11.64 degrees (North through East)
! Clean map  min=-0.0022336  max=0.065492 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J0037+3659_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0654921 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000557672 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -2.55453 2.55453 5.10906 10.2181 20.4362 40.8725 81.745
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0016 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.065 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  117.438 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J0037+3659_S_dfm.log closed on Thu May 19 23:45:08 2016