! Started logfile: /scr/pima/bg219a_uvs/J0029-0113_X_dfm.log on Thu May 19 23:45:02 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219a_uvs/J0029-0113_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J0029-0113_X_uva.fits
! AN table 1: 47 integrations on 15 of 15 possible baselines.
! Apparent sampling: 1 visibilities/baseline/integration-bin.
! Found source: J0029-0113
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 8460 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0029-0113_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.003681Jy  sigma=27.219029
! Fit after  self-cal, rms=0.896605Jy  sigma=24.046282
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6123 mas, bmaj=1.632 mas, bpa=1.804 degrees
! Estimated noise=0.525563 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0759782 Jy
! Component: 100  -  total flux cleaned = 0.101404 Jy
! Total flux subtracted in 100 components = 0.101404 Jy
! Clean residual min=-0.010029 max=0.011222 Jy/beam
! Clean residual mean=0.000006 rms=0.002238 Jy/beam
! Combined flux in latest and established models = 0.101403 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.101403 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065156Jy  sigma=1.623212
! Fit after  self-cal, rms=0.064941Jy  sigma=1.615345
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7425 mas, bmaj=1.882 mas, bpa=0.3393 degrees
! Estimated noise=0.296824 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0209979 Jy
! Component: 100  -  total flux cleaned = 0.0315138 Jy
! Component: 150  -  total flux cleaned = 0.0373517 Jy
! Component: 200  -  total flux cleaned = 0.0406496 Jy
! Total flux subtracted in 200 components = 0.0406496 Jy
! Clean residual min=-0.006359 max=0.010008 Jy/beam
! Clean residual mean=0.000007 rms=0.001590 Jy/beam
! Combined flux in latest and established models = 0.142053 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 19 components and 0.142053 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058824Jy  sigma=1.401613
! Fit after  self-cal, rms=0.058859Jy  sigma=1.399663
! Inverting map 
! Added new window around map position (1.8, 2.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00867989 Jy
! Component: 100  -  total flux cleaned = 0.0130701 Jy
! Component: 150  -  total flux cleaned = 0.0161867 Jy
! Component: 200  -  total flux cleaned = 0.0185416 Jy
! Total flux subtracted in 200 components = 0.0185416 Jy
! Clean residual min=-0.003752 max=0.004223 Jy/beam
! Clean residual mean=0.000004 rms=0.000996 Jy/beam
! Combined flux in latest and established models = 0.160595 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 36 components and 0.160595 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057504Jy  sigma=1.360455
! Fit after  self-cal, rms=0.057323Jy  sigma=1.355324
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7425 x 1.882 at 0.3393 degrees (North through East)
! Clean map  min=-0.0033896  max=0.10873 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.93     MK        1.02     NL        0.99     OV        1.07     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        1.10     NL        0.98     OV        1.05     
!   PT        0.96     SC        0.98     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        1.08     NL        0.99     OV        1.05     
!   PT        0.97     SC        1.02     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        0.98     NL        1.01     OV        1.06     
!   PT        0.96     SC        0.90     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        1.01     NL        1.00     OV        1.06     
!   PT        0.99     SC        0.97     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        0.97     NL        0.98     OV        1.06     
!   PT        0.98     SC        0.96     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        0.99     NL        1.02     OV        1.02     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.95     MK        1.00     NL        1.01     OV        1.07     
!   PT        0.98     SC        0.98     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        0.96     NL        1.01     OV        1.03     
!   PT        0.98     SC        0.98     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        0.92     NL        1.02     OV        1.02     
!   PT        0.96     SC        1.02     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        1.00     NL        0.98     OV        1.03     
!   PT        0.98     SC        1.05     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.95     MK        0.96     NL        0.95     OV        1.05     
!   PT        0.99     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.057323Jy  sigma=1.355324
! Fit after  self-cal, rms=0.056425Jy  sigma=1.346762
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7423 mas, bmaj=1.882 mas, bpa=0.357 degrees
! Estimated noise=0.293558 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00252933 Jy
! Component: 100  -  total flux cleaned = 0.00308397 Jy
! Component: 150  -  total flux cleaned = 0.00325483 Jy
! Component: 200  -  total flux cleaned = 0.00335624 Jy
! Total flux subtracted in 200 components = 0.00335624 Jy
! Clean residual min=-0.002927 max=0.003118 Jy/beam
! Clean residual mean=0.000002 rms=0.000671 Jy/beam
! Combined flux in latest and established models = 0.163951 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 46 components and 0.163951 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056265Jy  sigma=1.342173
! Fit after  self-cal, rms=0.056256Jy  sigma=1.341687
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056256Jy  sigma=1.341687
! Fit after  self-cal, rms=0.057372Jy  sigma=1.336898
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7438 mas, bmaj=1.879 mas, bpa=0.3985 degrees
! Estimated noise=0.293405 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00135434 Jy
! Component: 100  -  total flux cleaned = 0.00165314 Jy
! Component: 150  -  total flux cleaned = 0.00172387 Jy
! Component: 200  -  total flux cleaned = 0.00178856 Jy
! Total flux subtracted in 200 components = 0.00178856 Jy
! Clean residual min=-0.002733 max=0.002701 Jy/beam
! Clean residual mean=0.000003 rms=0.000600 Jy/beam
! Combined flux in latest and established models = 0.165739 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 68 components and 0.165739 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057315Jy  sigma=1.335204
! Fit after  self-cal, rms=0.057333Jy  sigma=1.335023
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000368944 Jy
! Component: 100  -  total flux cleaned = 0.000428413 Jy
! Component: 150  -  total flux cleaned = 0.000482769 Jy
! Component: 200  -  total flux cleaned = 0.000533736 Jy
! Total flux subtracted in 200 components = 0.000533736 Jy
! Clean residual min=-0.002644 max=0.002545 Jy/beam
! Clean residual mean=0.000003 rms=0.000585 Jy/beam
! Combined flux in latest and established models = 0.166273 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 74 components and 0.166273 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057307Jy  sigma=1.334312
! Fit after  self-cal, rms=0.057309Jy  sigma=1.334278
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057309Jy  sigma=1.334278
! Fit after  self-cal, rms=0.057232Jy  sigma=1.334120
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7433 mas, bmaj=1.878 mas, bpa=0.3769 degrees
! Estimated noise=0.292439 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000524348 Jy
! Component: 100  -  total flux cleaned = 0.000596005 Jy
! Component: 150  -  total flux cleaned = 0.000660364 Jy
! Component: 200  -  total flux cleaned = 0.000740732 Jy
! Total flux subtracted in 200 components = 0.000740732 Jy
! Clean residual min=-0.002524 max=0.002442 Jy/beam
! Clean residual mean=0.000003 rms=0.000574 Jy/beam
! Combined flux in latest and established models = 0.167014 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 78 components and 0.167014 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057213Jy  sigma=1.333667
! Fit after  self-cal, rms=0.057220Jy  sigma=1.333636
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000182766 Jy
! Component: 100  -  total flux cleaned = 0.000238581 Jy
! Component: 150  -  total flux cleaned = 0.000308403 Jy
! Component: 200  -  total flux cleaned = 0.000341531 Jy
! Total flux subtracted in 200 components = 0.000341531 Jy
! Clean residual min=-0.002477 max=0.002372 Jy/beam
! Clean residual mean=0.000003 rms=0.000568 Jy/beam
! Combined flux in latest and established models = 0.167355 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 80 components and 0.167355 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057208Jy  sigma=1.333373
! Fit after  self-cal, rms=0.057211Jy  sigma=1.333364
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057211Jy  sigma=1.333364
! Fit after  self-cal, rms=0.057096Jy  sigma=1.333326
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.97 mas, bmaj=4.397 mas, bpa=-4.643 degrees
! Estimated noise=0.397272 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000967221 Jy
! Component: 100  -  total flux cleaned = 0.00108302 Jy
! Component: 150  -  total flux cleaned = 0.00121268 Jy
! Component: 200  -  total flux cleaned = 0.00133444 Jy
! Total flux subtracted in 200 components = 0.00133444 Jy
! Clean residual min=-0.003838 max=0.003183 Jy/beam
! Clean residual mean=0.000008 rms=0.001094 Jy/beam
! Combined flux in latest and established models = 0.16869 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 91 components and 0.16869 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057092Jy  sigma=1.333480
! Fit after  self-cal, rms=0.057089Jy  sigma=1.333415
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000264125 Jy
! Component: 100  -  total flux cleaned = 0.000339349 Jy
! Component: 150  -  total flux cleaned = 0.000411573 Jy
! Component: 200  -  total flux cleaned = 0.000464037 Jy
! Total flux subtracted in 200 components = 0.000464037 Jy
! Clean residual min=-0.003749 max=0.003072 Jy/beam
! Clean residual mean=0.000008 rms=0.001069 Jy/beam
! Combined flux in latest and established models = 0.169154 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 95 components and 0.169154 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057086Jy  sigma=1.333395
! Fit after  self-cal, rms=0.057088Jy  sigma=1.333382
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.7431 mas, bmaj=1.878 mas, bpa=0.3576 degrees
! Estimated noise=0.291956 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7431 x 1.878 at 0.3576 degrees (North through East)
! Clean map  min=-0.0023271  max=0.10783 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.613 mas, bmaj=1.631 mas, bpa=1.757 degrees
! Estimated noise=0.517093 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0746083 Jy
! Component: 100  -  total flux cleaned = 0.100171 Jy
! Component: 150  -  total flux cleaned = 0.113594 Jy
! Component: 200  -  total flux cleaned = 0.12257 Jy
! Total flux subtracted in 200 components = 0.12257 Jy
! Clean residual min=-0.006223 max=0.006087 Jy/beam
! Clean residual mean=0.000004 rms=0.001343 Jy/beam
! Combined flux in latest and established models = 0.12257 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.12257 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.7431 mas, bmaj=1.878 mas, bpa=0.3576 degrees
! Estimated noise=0.291956 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0116626 Jy
! Component: 100  -  total flux cleaned = 0.0195068 Jy
! Component: 150  -  total flux cleaned = 0.0252446 Jy
! Component: 200  -  total flux cleaned = 0.0296455 Jy
! Total flux subtracted in 200 components = 0.0296455 Jy
! Clean residual min=-0.003589 max=0.003465 Jy/beam
! Clean residual mean=0.000006 rms=0.000919 Jy/beam
! Combined flux in latest and established models = 0.152216 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 34 components and 0.152216 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.97 mas, bmaj=4.397 mas, bpa=-4.643 degrees
! Estimated noise=0.397272 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00668586 Jy
! Component: 100  -  total flux cleaned = 0.0104816 Jy
! Component: 150  -  total flux cleaned = 0.0128239 Jy
! Component: 200  -  total flux cleaned = 0.0143009 Jy
! Total flux subtracted in 200 components = 0.0143009 Jy
! Clean residual min=-0.004298 max=0.003241 Jy/beam
! Clean residual mean=0.000009 rms=0.001145 Jy/beam
! Combined flux in latest and established models = 0.166517 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000935203 Jy
! Component: 100  -  total flux cleaned = 0.00110541 Jy
! Component: 150  -  total flux cleaned = 0.00126522 Jy
! Component: 200  -  total flux cleaned = 0.00141363 Jy
! Total flux subtracted in 200 components = 0.00141363 Jy
! Clean residual min=-0.004038 max=0.003046 Jy/beam
! Clean residual mean=0.000009 rms=0.001116 Jy/beam
! Combined flux in latest and established models = 0.16793 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 60 components and 0.16793 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.7431 mas, bmaj=1.878 mas, bpa=0.3576 degrees
! Estimated noise=0.291956 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000614957 Jy
! Component: 100  -  total flux cleaned = -0.00050897 Jy
! Component: 150  -  total flux cleaned = -0.00051222 Jy
! Component: 200  -  total flux cleaned = -0.000436893 Jy
! Total flux subtracted in 200 components = -0.000436893 Jy
! Clean residual min=-0.002602 max=0.002334 Jy/beam
! Clean residual mean=0.000003 rms=0.000582 Jy/beam
! Combined flux in latest and established models = 0.167493 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 74 components and 0.167493 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057126Jy  sigma=1.333536
! Fit after  self-cal, rms=0.057064Jy  sigma=1.333208
wmodel /J0029-0113_X_map.mod
! wmodel: Unable to open new model file: /J0029-0113_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J0029-0113_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7431 x 1.878 at 0.3576 degrees (North through East)
! Clean map  min=-0.0024454  max=0.1073 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J0029-0113_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.1073 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000573416 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.60321 1.60321 3.20641 6.41283 12.8257 25.6513 51.3026
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0017 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.107 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  187.124 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J0029-0113_X_dfm.log closed on Thu May 19 23:45:05 2016