! Started logfile: /scr/pima/bg219a_uvs/J0025+3919_S_uvs.log on Wed Apr  6 22:39:14 2016
obs /scr/pima/bg219a_uvs/J0025+3919_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J0025+3919_S_uva.fits
! AN table 1: 36 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.7 visibilities/baseline/integration-bin.
! Found source: J0025+3919
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 49 lines of history.
! 
! Reading 1512 visibilities.
select rr, 1,2,3,4,6,7,8 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219a_uvs/J0025+3919_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.120618Jy  sigma=26.629602
! Fit after  self-cal, rms=0.571721Jy  sigma=13.236761
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.486 mas, bmaj=4.834 mas, bpa=-16 degrees
! Estimated noise=1.37133 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.31217 Jy
! Component: 100  -  total flux cleaned = 0.387774 Jy
! Total flux subtracted in 100 components = 0.387774 Jy
! Clean residual min=-0.024112 max=0.034609 Jy/beam
! Clean residual mean=0.000080 rms=0.006755 Jy/beam
! Combined flux in latest and established models = 0.387774 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.387774 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.105792Jy  sigma=2.420547
! Fit after  self-cal, rms=0.105762Jy  sigma=2.419322
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.109 mas, bmaj=6.147 mas, bpa=-17.47 degrees
! Estimated noise=0.849355 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0649947 Jy
! Component: 100  -  total flux cleaned = 0.0951652 Jy
! Component: 150  -  total flux cleaned = 0.111262 Jy
! Component: 200  -  total flux cleaned = 0.120803 Jy
! Total flux subtracted in 200 components = 0.120803 Jy
! Clean residual min=-0.012316 max=0.021136 Jy/beam
! Clean residual mean=0.000066 rms=0.004356 Jy/beam
! Combined flux in latest and established models = 0.508578 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 20 components and 0.508578 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060177Jy  sigma=1.326295
! Fit after  self-cal, rms=0.060142Jy  sigma=1.322886
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.109 x 6.147 at -17.47 degrees (North through East)
! Clean map  min=-0.011606  max=0.43023 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        1.05     NL        1.02     OV        1.01     
!   PT        0.97     SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        0.99     NL        1.04     OV        1.02     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        0.99     NL        1.07     OV        1.03     
!   PT        1.00     SC        0.97     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        0.99     NL        1.04     OV        0.98     
!   PT        0.97     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.060142Jy  sigma=1.322886
! Fit after  self-cal, rms=0.057838Jy  sigma=1.269128
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.119 mas, bmaj=6.154 mas, bpa=-17.11 degrees
! Estimated noise=0.844669 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00128238 Jy
! Component: 100  -  total flux cleaned = 0.00151833 Jy
! Component: 150  -  total flux cleaned = 0.00170251 Jy
! Component: 200  -  total flux cleaned = 0.00177926 Jy
! Total flux subtracted in 200 components = 0.00177926 Jy
! Clean residual min=-0.010128 max=0.016118 Jy/beam
! Clean residual mean=0.000040 rms=0.003593 Jy/beam
! Combined flux in latest and established models = 0.510357 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 27 components and 0.510357 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057371Jy  sigma=1.261501
! Fit after  self-cal, rms=0.057388Jy  sigma=1.259974
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057388Jy  sigma=1.259974
! Fit after  self-cal, rms=0.055334Jy  sigma=1.179353
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.131 mas, bmaj=6.183 mas, bpa=-17.03 degrees
! Estimated noise=0.847399 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00218094 Jy
! Component: 100  -  total flux cleaned = 0.00242802 Jy
! Component: 150  -  total flux cleaned = 0.00253572 Jy
! Component: 200  -  total flux cleaned = 0.00263599 Jy
! Total flux subtracted in 200 components = 0.00263599 Jy
! Clean residual min=-0.007194 max=0.011039 Jy/beam
! Clean residual mean=0.000008 rms=0.002093 Jy/beam
! Combined flux in latest and established models = 0.512993 Jy
selfcal
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 31 components and 0.512993 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054830Jy  sigma=1.168555
! Fit after  self-cal, rms=0.054857Jy  sigma=1.167450
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (3.5, -12).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0090816 Jy
! Component: 100  -  total flux cleaned = 0.00896968 Jy
! Component: 150  -  total flux cleaned = 0.00896644 Jy
! Component: 200  -  total flux cleaned = 0.00885801 Jy
! Total flux subtracted in 200 components = 0.00885801 Jy
! Clean residual min=-0.005948 max=0.006004 Jy/beam
! Clean residual mean=-0.000002 rms=0.001476 Jy/beam
! Combined flux in latest and established models = 0.521851 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 46 components and 0.521851 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053110Jy  sigma=1.130094
! Fit after  self-cal, rms=0.053051Jy  sigma=1.129082
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053051Jy  sigma=1.129082
! Fit after  self-cal, rms=0.052586Jy  sigma=1.124894
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.123 mas, bmaj=6.161 mas, bpa=-17.05 degrees
! Estimated noise=0.844011 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00347791 Jy
! Component: 100  -  total flux cleaned = 0.0041576 Jy
! Component: 150  -  total flux cleaned = 0.0043719 Jy
! Component: 200  -  total flux cleaned = 0.00437381 Jy
! Total flux subtracted in 200 components = 0.00437381 Jy
! Clean residual min=-0.005447 max=0.005237 Jy/beam
! Clean residual mean=-0.000002 rms=0.001303 Jy/beam
! Combined flux in latest and established models = 0.526225 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 57 components and 0.526225 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052311Jy  sigma=1.119461
! Fit after  self-cal, rms=0.052289Jy  sigma=1.119015
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000763481 Jy
! Component: 100  -  total flux cleaned = 0.000849352 Jy
! Component: 150  -  total flux cleaned = 0.00081577 Jy
! Component: 200  -  total flux cleaned = 0.000720936 Jy
! Total flux subtracted in 200 components = 0.000720936 Jy
! Clean residual min=-0.005274 max=0.005080 Jy/beam
! Clean residual mean=-0.000002 rms=0.001270 Jy/beam
! Combined flux in latest and established models = 0.526946 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 67 components and 0.526946 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052225Jy  sigma=1.117863
! Fit after  self-cal, rms=0.052221Jy  sigma=1.117698
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052221Jy  sigma=1.117698
! Fit after  self-cal, rms=0.052134Jy  sigma=1.116755
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.918 mas, bmaj=13.08 mas, bpa=-22.25 degrees
! Estimated noise=1.0621 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000911279 Jy
! Component: 100  -  total flux cleaned = 0.00116464 Jy
! Component: 150  -  total flux cleaned = 0.00134671 Jy
! Component: 200  -  total flux cleaned = 0.00154224 Jy
! Total flux subtracted in 200 components = 0.00154224 Jy
! Clean residual min=-0.005816 max=0.006021 Jy/beam
! Clean residual mean=-0.000003 rms=0.001969 Jy/beam
! Combined flux in latest and established models = 0.528488 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 88 components and 0.528488 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052075Jy  sigma=1.115755
! Fit after  self-cal, rms=0.052068Jy  sigma=1.115445
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000269706 Jy
! Component: 100  -  total flux cleaned = 0.00041058 Jy
! Component: 150  -  total flux cleaned = 0.000513243 Jy
! Component: 200  -  total flux cleaned = 0.000575344 Jy
! Total flux subtracted in 200 components = 0.000575344 Jy
! Clean residual min=-0.005743 max=0.005846 Jy/beam
! Clean residual mean=-0.000004 rms=0.001941 Jy/beam
! Combined flux in latest and established models = 0.529063 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 100 components and 0.529063 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052044Jy  sigma=1.115358
! Fit after  self-cal, rms=0.052044Jy  sigma=1.115163
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.121 mas, bmaj=6.155 mas, bpa=-17.04 degrees
! Estimated noise=0.843387 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.121 x 6.155 at -17.04 degrees (North through East)
! Clean map  min=-0.0048819  max=0.42637 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.493 mas, bmaj=4.844 mas, bpa=-15.7 degrees
! Estimated noise=1.36353 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.310413 Jy
! Component: 100  -  total flux cleaned = 0.385559 Jy
! Component: 150  -  total flux cleaned = 0.426105 Jy
! Component: 200  -  total flux cleaned = 0.451369 Jy
! Total flux subtracted in 200 components = 0.451369 Jy
! Clean residual min=-0.009855 max=0.013186 Jy/beam
! Clean residual mean=0.000036 rms=0.003214 Jy/beam
! Combined flux in latest and established models = 0.451369 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.451369 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.121 mas, bmaj=6.155 mas, bpa=-17.04 degrees
! Estimated noise=0.843387 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0291961 Jy
! Component: 100  -  total flux cleaned = 0.0451804 Jy
! Component: 150  -  total flux cleaned = 0.0553703 Jy
! Component: 200  -  total flux cleaned = 0.0621262 Jy
! Total flux subtracted in 200 components = 0.0621262 Jy
! Clean residual min=-0.006689 max=0.005011 Jy/beam
! Clean residual mean=0.000017 rms=0.001651 Jy/beam
! Combined flux in latest and established models = 0.513496 Jy
! Adding 50 model components to the UV plane model.
! The established model now contains 53 components and 0.513495 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.918 mas, bmaj=13.08 mas, bpa=-22.25 degrees
! Estimated noise=1.0621 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00740907 Jy
! Component: 100  -  total flux cleaned = 0.0112297 Jy
! Component: 150  -  total flux cleaned = 0.0133779 Jy
! Component: 200  -  total flux cleaned = 0.0141033 Jy
! Total flux subtracted in 200 components = 0.0141033 Jy
! Clean residual min=-0.005722 max=0.005453 Jy/beam
! Clean residual mean=0.000000 rms=0.001906 Jy/beam
! Combined flux in latest and established models = 0.527599 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000364382 Jy
! Component: 100  -  total flux cleaned = 0.000647106 Jy
! Component: 150  -  total flux cleaned = 0.000844981 Jy
! Component: 200  -  total flux cleaned = 0.00098626 Jy
! Total flux subtracted in 200 components = 0.00098626 Jy
! Clean residual min=-0.005497 max=0.005619 Jy/beam
! Clean residual mean=-0.000003 rms=0.001860 Jy/beam
! Combined flux in latest and established models = 0.528585 Jy
! Adding 49 model components to the UV plane model.
! The established model now contains 94 components and 0.528585 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.121 mas, bmaj=6.155 mas, bpa=-17.04 degrees
! Estimated noise=0.843387 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000402438 Jy
! Component: 100  -  total flux cleaned = 0.000281019 Jy
! Component: 150  -  total flux cleaned = 0.000232408 Jy
! Component: 200  -  total flux cleaned = 0.000192467 Jy
! Total flux subtracted in 200 components = 0.000192467 Jy
! Clean residual min=-0.005246 max=0.004613 Jy/beam
! Clean residual mean=-0.000001 rms=0.001165 Jy/beam
! Combined flux in latest and established models = 0.528777 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 110 components and 0.528777 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052060Jy  sigma=1.115147
! Fit after  self-cal, rms=0.052033Jy  sigma=1.114437
wmodel /scr/pima/bg219a_uvs/J0025+3919_S_map.mod
! Writing 110 model components to file: /scr/pima/bg219a_uvs/J0025+3919_S_map.mod
wobs /scr/pima/bg219a_uvs/J0025+3919_S_uvs.fits
! Writing UV FITS file: /scr/pima/bg219a_uvs/J0025+3919_S_uvs.fits
wwins /scr/pima/bg219a_uvs/J0025+3919_S_map.win
! wwins: Wrote 2 windows to /scr/pima/bg219a_uvs/J0025+3919_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000693982 Jy
! Component: 100  -  total flux cleaned = -0.000431114 Jy
! Component: 150  -  total flux cleaned = -7.80597e-05 Jy
! Component: 200  -  total flux cleaned = 0.00013506 Jy
! Component: 250  -  total flux cleaned = 0.000334182 Jy
! Component: 300  -  total flux cleaned = 0.000564579 Jy
! Component: 350  -  total flux cleaned = 0.000650637 Jy
! Component: 400  -  total flux cleaned = 0.00073336 Jy
! Component: 450  -  total flux cleaned = 0.000809743 Jy
! Component: 500  -  total flux cleaned = 0.000846133 Jy
! Component: 550  -  total flux cleaned = 0.000881539 Jy
! Component: 600  -  total flux cleaned = 0.000849231 Jy
! Component: 650  -  total flux cleaned = 0.000817994 Jy
! Component: 700  -  total flux cleaned = 0.000757803 Jy
! Component: 750  -  total flux cleaned = 0.000814738 Jy
! Component: 800  -  total flux cleaned = 0.000842698 Jy
! Component: 850  -  total flux cleaned = 0.000948804 Jy
! Component: 900  -  total flux cleaned = 0.00102635 Jy
! Component: 950  -  total flux cleaned = 0.00102721 Jy
! Component: 1000  -  total flux cleaned = 0.00100262 Jy
! Component: 1050  -  total flux cleaned = 0.000955384 Jy
! Component: 1100  -  total flux cleaned = 0.000886962 Jy
! Component: 1150  -  total flux cleaned = 0.000909515 Jy
! Component: 1200  -  total flux cleaned = 0.000887203 Jy
! Component: 1250  -  total flux cleaned = 0.000843685 Jy
! Component: 1300  -  total flux cleaned = 0.000822271 Jy
! Component: 1350  -  total flux cleaned = 0.000780648 Jy
! Component: 1400  -  total flux cleaned = 0.00072031 Jy
! Component: 1450  -  total flux cleaned = 0.000660945 Jy
! Component: 1500  -  total flux cleaned = 0.000583064 Jy
! Component: 1550  -  total flux cleaned = 0.000525674 Jy
! Component: 1600  -  total flux cleaned = 0.00045018 Jy
! Component: 1650  -  total flux cleaned = 0.000375734 Jy
! Component: 1700  -  total flux cleaned = 0.000266002 Jy
! Component: 1750  -  total flux cleaned = 0.000247976 Jy
! Component: 1800  -  total flux cleaned = 0.000176486 Jy
! Component: 1850  -  total flux cleaned = 0.00010611 Jy
! Component: 1900  -  total flux cleaned = 5.42114e-05 Jy
! Component: 1950  -  total flux cleaned = 2.63798e-06 Jy
! Component: 2000  -  total flux cleaned = -6.52177e-05 Jy
! Component: 2050  -  total flux cleaned = -9.89991e-05 Jy
! Component: 2100  -  total flux cleaned = -0.000132505 Jy
! Component: 2150  -  total flux cleaned = -0.000182412 Jy
! Component: 2200  -  total flux cleaned = -0.000198908 Jy
! Component: 2250  -  total flux cleaned = -0.00019879 Jy
! Component: 2300  -  total flux cleaned = -0.000149459 Jy
! Component: 2350  -  total flux cleaned = -0.000198664 Jy
! Component: 2400  -  total flux cleaned = -0.000198657 Jy
! Component: 2450  -  total flux cleaned = -0.000214914 Jy
! Component: 2500  -  total flux cleaned = -0.000296198 Jy
! Component: 2550  -  total flux cleaned = -0.000344905 Jy
! Component: 2600  -  total flux cleaned = -0.000409795 Jy
! Component: 2650  -  total flux cleaned = -0.000442098 Jy
! Component: 2700  -  total flux cleaned = -0.00047451 Jy
! Component: 2750  -  total flux cleaned = -0.000523178 Jy
! Component: 2800  -  total flux cleaned = -0.000555746 Jy
! Component: 2850  -  total flux cleaned = -0.000604595 Jy
! Component: 2900  -  total flux cleaned = -0.000669808 Jy
! Component: 2950  -  total flux cleaned = -0.000735235 Jy
! Component: 3000  -  total flux cleaned = -0.000800909 Jy
! Component: 3050  -  total flux cleaned = -0.000883458 Jy
! Component: 3100  -  total flux cleaned = -0.000949776 Jy
! Component: 3150  -  total flux cleaned = -0.00108298 Jy
! Component: 3200  -  total flux cleaned = -0.00118348 Jy
! Component: 3250  -  total flux cleaned = -0.00130149 Jy
! Component: 3300  -  total flux cleaned = -0.00145448 Jy
! Component: 3350  -  total flux cleaned = -0.00154012 Jy
! Component: 3400  -  total flux cleaned = -0.00166056 Jy
! Component: 3450  -  total flux cleaned = -0.00178191 Jy
! Component: 3500  -  total flux cleaned = -0.00190421 Jy
! Component: 3550  -  total flux cleaned = -0.00200972 Jy
! Component: 3600  -  total flux cleaned = -0.00213379 Jy
! Component: 3650  -  total flux cleaned = -0.00224097 Jy
! Component: 3700  -  total flux cleaned = -0.00236685 Jy
! Component: 3750  -  total flux cleaned = -0.00247561 Jy
! Component: 3800  -  total flux cleaned = -0.00258538 Jy
! Component: 3850  -  total flux cleaned = -0.00271465 Jy
! Component: 3900  -  total flux cleaned = -0.00284511 Jy
! Component: 3950  -  total flux cleaned = -0.00293907 Jy
! Component: 4000  -  total flux cleaned = -0.00305275 Jy
! Component: 4050  -  total flux cleaned = -0.00314828 Jy
! Total flux subtracted in 4096 components = -0.00324457 Jy
! Clean residual min=-0.001105 max=0.001146 Jy/beam
! Clean residual mean=-0.000025 rms=0.000276 Jy/beam
! Combined flux in latest and established models = 0.525533 Jy
keep
! Adding 216 model components to the UV plane model.
! The established model now contains 326 components and 0.525533 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219a_uvs/J0025+3919_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.121 x 6.155 at -17.04 degrees (North through East)
! Clean map  min=-0.0021654  max=0.43261 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J0025+3919_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.43261 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000225454 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.156344 0.156344 0.312689 0.625378 1.25076 2.50151 5.00302 10.006 20.0121 40.0242 80.0484
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.432 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1918.84 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J0025+3919_S_uvs.log closed on Wed Apr  6 22:39:19 2016