! Started logfile: /scr/pima/bg219a_uvs/J0024-0412_S_uvs.log on Wed Apr 6 22:39:10 2016 obs /scr/pima/bg219a_uvs/J0024-0412_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219a_uvs/J0024-0412_S_uva.fits ! AN table 1: 36 integrations on 15 of 15 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J0024-0412 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 49 lines of history. ! ! Reading 2160 visibilities. select rr, 1,2,3,4,6,7,8 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /scr/pima/bg219a_uvs/J0024-0412_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.031132Jy sigma=21.484936 ! Fit after self-cal, rms=0.858943Jy sigma=17.724710 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.352 mas, bmaj=6.372 mas, bpa=-2.97 degrees ! Estimated noise=1.07089 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.107796 Jy ! Component: 100 - total flux cleaned = 0.133772 Jy ! Total flux subtracted in 100 components = 0.133772 Jy ! Clean residual min=-0.010055 max=0.011765 Jy/beam ! Clean residual mean=-0.000004 rms=0.002836 Jy/beam ! Combined flux in latest and established models = 0.133772 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.133772 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080161Jy sigma=1.427751 ! Fit after self-cal, rms=0.080129Jy sigma=1.427295 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.76 mas, bmaj=7.138 mas, bpa=-2.432 degrees ! Estimated noise=0.803595 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0203039 Jy ! Component: 100 - total flux cleaned = 0.0312916 Jy ! Component: 150 - total flux cleaned = 0.0373704 Jy ! Component: 200 - total flux cleaned = 0.0409217 Jy ! Total flux subtracted in 200 components = 0.0409217 Jy ! Clean residual min=-0.007460 max=0.011595 Jy/beam ! Clean residual mean=-0.000016 rms=0.002273 Jy/beam ! Combined flux in latest and established models = 0.174694 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 30 components and 0.174694 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075408Jy sigma=1.289182 ! Fit after self-cal, rms=0.075319Jy sigma=1.286650 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.76 x 7.138 at -2.432 degrees (North through East) ! Clean map min=-0.0071127 max=0.14476 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! LA 0.90 MK 1.02 NL 1.01 OV 1.06 ! PT 0.93 SC 1.06 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! LA 0.93 MK 0.98 NL 1.03 OV 1.04 ! PT 0.94 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! LA 1.00 MK 0.99 NL 1.04 OV 1.03 ! PT 0.96 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! LA 0.94 MK 1.00 NL 1.00 OV 1.04 ! PT 0.99 SC 0.92 ! ! ! Fit before self-cal, rms=0.075319Jy sigma=1.286650 ! Fit after self-cal, rms=0.072412Jy sigma=1.272431 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.77 mas, bmaj=7.179 mas, bpa=-2.493 degrees ! Estimated noise=0.793532 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (10.5, -1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00965888 Jy ! Component: 100 - total flux cleaned = 0.0123045 Jy ! Component: 150 - total flux cleaned = 0.0131 Jy ! Component: 200 - total flux cleaned = 0.0133445 Jy ! Total flux subtracted in 200 components = 0.0133445 Jy ! Clean residual min=-0.005492 max=0.005209 Jy/beam ! Clean residual mean=-0.000000 rms=0.001306 Jy/beam ! Combined flux in latest and established models = 0.188038 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 60 components and 0.188038 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071168Jy sigma=1.241899 ! Fit after self-cal, rms=0.070836Jy sigma=1.238182 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070836Jy sigma=1.238182 ! Fit after self-cal, rms=0.070996Jy sigma=1.221961 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.771 mas, bmaj=7.171 mas, bpa=-2.618 degrees ! Estimated noise=0.788515 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0032788 Jy ! Component: 100 - total flux cleaned = 0.0038103 Jy ! Component: 150 - total flux cleaned = 0.00393863 Jy ! Component: 200 - total flux cleaned = 0.00398986 Jy ! Total flux subtracted in 200 components = 0.00398986 Jy ! Clean residual min=-0.003552 max=0.003357 Jy/beam ! Clean residual mean=0.000003 rms=0.000898 Jy/beam ! Combined flux in latest and established models = 0.192028 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 87 components and 0.192028 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070786Jy sigma=1.218015 ! Fit after self-cal, rms=0.070841Jy sigma=1.217261 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000860452 Jy ! Component: 100 - total flux cleaned = 0.000940848 Jy ! Component: 150 - total flux cleaned = 0.00097328 Jy ! Component: 200 - total flux cleaned = 0.00103606 Jy ! Total flux subtracted in 200 components = 0.00103606 Jy ! Clean residual min=-0.003489 max=0.003429 Jy/beam ! Clean residual mean=0.000003 rms=0.000864 Jy/beam ! Combined flux in latest and established models = 0.193064 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 94 components and 0.193064 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070792Jy sigma=1.216370 ! Fit after self-cal, rms=0.070780Jy sigma=1.216259 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070780Jy sigma=1.216259 ! Fit after self-cal, rms=0.070739Jy sigma=1.214964 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.772 mas, bmaj=7.161 mas, bpa=-2.578 degrees ! Estimated noise=0.78554 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00163748 Jy ! Component: 100 - total flux cleaned = 0.00193891 Jy ! Component: 150 - total flux cleaned = 0.00190563 Jy ! Component: 200 - total flux cleaned = 0.00193098 Jy ! Total flux subtracted in 200 components = 0.00193098 Jy ! Clean residual min=-0.003236 max=0.003053 Jy/beam ! Clean residual mean=-0.000000 rms=0.000777 Jy/beam ! Combined flux in latest and established models = 0.194995 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 105 components and 0.194995 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070688Jy sigma=1.213930 ! Fit after self-cal, rms=0.070686Jy sigma=1.213763 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00035545 Jy ! Component: 100 - total flux cleaned = 0.000308152 Jy ! Component: 150 - total flux cleaned = 0.000286671 Jy ! Component: 200 - total flux cleaned = 0.000347158 Jy ! Total flux subtracted in 200 components = 0.000347158 Jy ! Clean residual min=-0.003235 max=0.003061 Jy/beam ! Clean residual mean=-0.000000 rms=0.000763 Jy/beam ! Combined flux in latest and established models = 0.195342 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 117 components and 0.195342 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070671Jy sigma=1.213396 ! Fit after self-cal, rms=0.070667Jy sigma=1.213353 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070667Jy sigma=1.213353 ! Fit after self-cal, rms=0.070748Jy sigma=1.213004 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.087 mas, bmaj=15.49 mas, bpa=-3.508 degrees ! Estimated noise=1.04391 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0012453 Jy ! Component: 100 - total flux cleaned = 0.00178809 Jy ! Component: 150 - total flux cleaned = 0.00179066 Jy ! Component: 200 - total flux cleaned = 0.00176969 Jy ! Total flux subtracted in 200 components = 0.00176969 Jy ! Clean residual min=-0.002559 max=0.003018 Jy/beam ! Clean residual mean=-0.000000 rms=0.000887 Jy/beam ! Combined flux in latest and established models = 0.197112 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 140 components and 0.197112 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070734Jy sigma=1.212789 ! Fit after self-cal, rms=0.070738Jy sigma=1.212705 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000303131 Jy ! Component: 100 - total flux cleaned = 0.000303204 Jy ! Component: 150 - total flux cleaned = 0.000268343 Jy ! Component: 200 - total flux cleaned = 0.000241048 Jy ! Total flux subtracted in 200 components = 0.000241048 Jy ! Clean residual min=-0.002525 max=0.002970 Jy/beam ! Clean residual mean=0.000000 rms=0.000877 Jy/beam ! Combined flux in latest and established models = 0.197353 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 150 components and 0.197353 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070734Jy sigma=1.212585 ! Fit after self-cal, rms=0.070734Jy sigma=1.212555 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.772 mas, bmaj=7.158 mas, bpa=-2.582 degrees ! Estimated noise=0.783873 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.772 x 7.158 at -2.582 degrees (North through East) ! Clean map min=-0.0041916 max=0.14322 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.355 mas, bmaj=6.361 mas, bpa=-3.145 degrees ! Estimated noise=1.04811 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.105206 Jy ! Component: 100 - total flux cleaned = 0.130717 Jy ! Component: 150 - total flux cleaned = 0.144475 Jy ! Component: 200 - total flux cleaned = 0.154594 Jy ! Total flux subtracted in 200 components = 0.154594 Jy ! Clean residual min=-0.006717 max=0.006943 Jy/beam ! Clean residual mean=-0.000005 rms=0.001797 Jy/beam ! Combined flux in latest and established models = 0.154594 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.154594 Jy ! Inverting map and beam ! Estimated beam: bmin=2.772 mas, bmaj=7.158 mas, bpa=-2.582 degrees ! Estimated noise=0.783873 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0120844 Jy ! Component: 100 - total flux cleaned = 0.0203799 Jy ! Component: 150 - total flux cleaned = 0.0264526 Jy ! Component: 200 - total flux cleaned = 0.0310309 Jy ! Total flux subtracted in 200 components = 0.0310309 Jy ! Clean residual min=-0.004006 max=0.004355 Jy/beam ! Clean residual mean=-0.000005 rms=0.001098 Jy/beam ! Combined flux in latest and established models = 0.185625 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 68 components and 0.185625 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.087 mas, bmaj=15.49 mas, bpa=-3.508 degrees ! Estimated noise=1.04391 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00624802 Jy ! Component: 100 - total flux cleaned = 0.00949656 Jy ! Component: 150 - total flux cleaned = 0.0109971 Jy ! Component: 200 - total flux cleaned = 0.0115174 Jy ! Total flux subtracted in 200 components = 0.0115174 Jy ! Clean residual min=-0.002725 max=0.003034 Jy/beam ! Clean residual mean=0.000000 rms=0.000920 Jy/beam ! Combined flux in latest and established models = 0.197143 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000301089 Jy ! Component: 100 - total flux cleaned = 0.00044848 Jy ! Component: 150 - total flux cleaned = 0.000519438 Jy ! Component: 200 - total flux cleaned = 0.000479095 Jy ! Total flux subtracted in 200 components = 0.000479095 Jy ! Clean residual min=-0.002534 max=0.003133 Jy/beam ! Clean residual mean=0.000001 rms=0.000895 Jy/beam ! Combined flux in latest and established models = 0.197622 Jy ! Adding 79 model components to the UV plane model. ! The established model now contains 141 components and 0.197622 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.772 mas, bmaj=7.158 mas, bpa=-2.582 degrees ! Estimated noise=0.783873 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00085265 Jy ! Component: 100 - total flux cleaned = 0.000809874 Jy ! Component: 150 - total flux cleaned = 0.000539726 Jy ! Component: 200 - total flux cleaned = 0.000240549 Jy ! Total flux subtracted in 200 components = 0.000240549 Jy ! Clean residual min=-0.003326 max=0.002829 Jy/beam ! Clean residual mean=-0.000001 rms=0.000740 Jy/beam ! Combined flux in latest and established models = 0.197862 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 152 components and 0.197862 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070754Jy sigma=1.213117 ! Fit after self-cal, rms=0.070751Jy sigma=1.212855 wmodel /scr/pima/bg219a_uvs/J0024-0412_S_map.mod ! Writing 152 model components to file: /scr/pima/bg219a_uvs/J0024-0412_S_map.mod wobs /scr/pima/bg219a_uvs/J0024-0412_S_uvs.fits ! Writing UV FITS file: /scr/pima/bg219a_uvs/J0024-0412_S_uvs.fits wwins /scr/pima/bg219a_uvs/J0024-0412_S_map.win ! wwins: Wrote 2 windows to /scr/pima/bg219a_uvs/J0024-0412_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000972687 Jy ! Component: 100 - total flux cleaned = -0.00170147 Jy ! Component: 150 - total flux cleaned = -0.00179131 Jy ! Component: 200 - total flux cleaned = -0.00196263 Jy ! Component: 250 - total flux cleaned = -0.00212609 Jy ! Component: 300 - total flux cleaned = -0.00216413 Jy ! Component: 350 - total flux cleaned = -0.00223859 Jy ! Component: 400 - total flux cleaned = -0.00234657 Jy ! Component: 450 - total flux cleaned = -0.00234683 Jy ! Component: 500 - total flux cleaned = -0.00255031 Jy ! Component: 550 - total flux cleaned = -0.00264911 Jy ! Component: 600 - total flux cleaned = -0.00280871 Jy ! Component: 650 - total flux cleaned = -0.00287106 Jy ! Component: 700 - total flux cleaned = -0.00296248 Jy ! Component: 750 - total flux cleaned = -0.0029623 Jy ! Component: 800 - total flux cleaned = -0.00307701 Jy ! Component: 850 - total flux cleaned = -0.00304842 Jy ! Component: 900 - total flux cleaned = -0.00304815 Jy ! Component: 950 - total flux cleaned = -0.00304797 Jy ! Component: 1000 - total flux cleaned = -0.00299576 Jy ! Component: 1050 - total flux cleaned = -0.00307319 Jy ! Component: 1100 - total flux cleaned = -0.00304738 Jy ! Component: 1150 - total flux cleaned = -0.00294739 Jy ! Component: 1200 - total flux cleaned = -0.00285021 Jy ! Component: 1250 - total flux cleaned = -0.00282692 Jy ! Component: 1300 - total flux cleaned = -0.00285061 Jy ! Component: 1350 - total flux cleaned = -0.002804 Jy ! Component: 1400 - total flux cleaned = -0.00278032 Jy ! Component: 1450 - total flux cleaned = -0.00269116 Jy ! Component: 1500 - total flux cleaned = -0.00258111 Jy ! Component: 1550 - total flux cleaned = -0.00249499 Jy ! Component: 1600 - total flux cleaned = -0.00245232 Jy ! Component: 1650 - total flux cleaned = -0.0023479 Jy ! Component: 1700 - total flux cleaned = -0.00230635 Jy ! Component: 1750 - total flux cleaned = -0.00226512 Jy ! Component: 1800 - total flux cleaned = -0.00212623 Jy ! Component: 1850 - total flux cleaned = -0.00212633 Jy ! Component: 1900 - total flux cleaned = -0.00206854 Jy ! Component: 1950 - total flux cleaned = -0.0020495 Jy ! Component: 2000 - total flux cleaned = -0.00195586 Jy ! Component: 2050 - total flux cleaned = -0.00193729 Jy ! Component: 2100 - total flux cleaned = -0.00186496 Jy ! Component: 2150 - total flux cleaned = -0.00184696 Jy ! Component: 2200 - total flux cleaned = -0.00177621 Jy ! Component: 2250 - total flux cleaned = -0.00167136 Jy ! Component: 2300 - total flux cleaned = -0.00163694 Jy ! Component: 2350 - total flux cleaned = -0.00155234 Jy ! Component: 2400 - total flux cleaned = -0.00150228 Jy ! Component: 2450 - total flux cleaned = -0.00141987 Jy ! Component: 2500 - total flux cleaned = -0.00141985 Jy ! Component: 2550 - total flux cleaned = -0.00135571 Jy ! Component: 2600 - total flux cleaned = -0.00132424 Jy ! Component: 2650 - total flux cleaned = -0.00132418 Jy ! Component: 2700 - total flux cleaned = -0.001293 Jy ! Component: 2750 - total flux cleaned = -0.00123159 Jy ! Component: 2800 - total flux cleaned = -0.00123119 Jy ! Component: 2850 - total flux cleaned = -0.00120098 Jy ! Component: 2900 - total flux cleaned = -0.00114124 Jy ! Component: 2950 - total flux cleaned = -0.00105265 Jy ! Component: 3000 - total flux cleaned = -0.0010235 Jy ! Component: 3050 - total flux cleaned = -0.000979893 Jy ! Component: 3100 - total flux cleaned = -0.000879056 Jy ! Component: 3150 - total flux cleaned = -0.00083621 Jy ! Component: 3200 - total flux cleaned = -0.000779484 Jy ! Component: 3250 - total flux cleaned = -0.000709141 Jy ! Component: 3300 - total flux cleaned = -0.000611423 Jy ! Component: 3350 - total flux cleaned = -0.000514512 Jy ! Component: 3400 - total flux cleaned = -0.000459596 Jy ! Component: 3450 - total flux cleaned = -0.000391357 Jy ! Component: 3500 - total flux cleaned = -0.000323626 Jy ! Component: 3550 - total flux cleaned = -0.000283196 Jy ! Component: 3600 - total flux cleaned = -0.000189765 Jy ! Component: 3650 - total flux cleaned = -0.000136974 Jy ! Component: 3700 - total flux cleaned = -9.75983e-05 Jy ! Component: 3750 - total flux cleaned = -8.45717e-05 Jy ! Component: 3800 - total flux cleaned = 6.3128e-06 Jy ! Component: 3850 - total flux cleaned = 4.48839e-05 Jy ! Component: 3900 - total flux cleaned = 7.05205e-05 Jy ! Component: 3950 - total flux cleaned = 0.000159711 Jy ! Component: 4000 - total flux cleaned = 0.000185019 Jy ! Component: 4050 - total flux cleaned = 0.000273229 Jy ! Total flux subtracted in 4096 components = 0.000323319 Jy ! Clean residual min=-0.000768 max=0.000755 Jy/beam ! Clean residual mean=0.000001 rms=0.000218 Jy/beam ! Combined flux in latest and established models = 0.198185 Jy keep ! Adding 232 model components to the UV plane model. ! The established model now contains 384 components and 0.198186 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/bg219a_uvs/J0024-0412_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.772 x 7.158 at -2.582 degrees (North through East) ! Clean map min=-0.002101 max=0.14212 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J0024-0412_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.142123 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000211172 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.445753 0.445753 0.891507 1.78301 3.56603 7.13205 14.2641 28.5282 57.0564 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.142 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 673.017 quit ! Quitting program ! Log file /scr/pima/bg219a_uvs/J0024-0412_S_uvs.log closed on Wed Apr 6 22:39:14 2016