! Started logfile: /scr/pima/bg219a_uvs/J0019+7327_X_dfm.log on Thu May 19 23:44:24 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219a_uvs/J0019+7327_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J0019+7327_X_uva.fits
! AN table 1: 18 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.679894 visibilities/baseline/integration-bin.
! Found source: J0019+7327
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 3084 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0019+7327_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.812235Jy  sigma=24.123614
! Fit after  self-cal, rms=0.676873Jy  sigma=9.136437
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.5467 mas, bmaj=2.204 mas, bpa=77.12 degrees
! Estimated noise=2.57523 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.13818 Jy
! Component: 100  -  total flux cleaned = 1.4383 Jy
! Total flux subtracted in 100 components = 1.4383 Jy
! Clean residual min=-0.129193 max=0.185412 Jy/beam
! Clean residual mean=-0.000106 rms=0.034164 Jy/beam
! Combined flux in latest and established models = 1.4383 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 1.4383 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.436899Jy  sigma=4.524408
! Fit after  self-cal, rms=0.432454Jy  sigma=4.522341
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6768 mas, bmaj=2.654 mas, bpa=75.34 degrees
! Estimated noise=1.35548 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.203684 Jy
! Component: 100  -  total flux cleaned = 0.284773 Jy
! Component: 150  -  total flux cleaned = 0.324857 Jy
! Component: 200  -  total flux cleaned = 0.348945 Jy
! Total flux subtracted in 200 components = 0.348945 Jy
! Clean residual min=-0.044609 max=0.056726 Jy/beam
! Clean residual mean=-0.000072 rms=0.010800 Jy/beam
! Combined flux in latest and established models = 1.78724 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 30 components and 1.78724 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.402579Jy  sigma=2.351527
! Fit after  self-cal, rms=0.401302Jy  sigma=2.344512
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.6768 x 2.654 at 75.34 degrees (North through East)
! Clean map  min=-0.040425  max=1.5899 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   KP        1.00*    LA        1.00*    MK        1.00*    NL        1.00*    
!   OV        1.00*    PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   KP        1.00*    LA        1.00*    MK        1.00*    NL        1.00*    
!   OV        1.00*    PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   KP        1.00*    LA        1.00*    MK        1.00*    NL        1.00*    
!   OV        1.00*    PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   KP        1.00*    LA        1.00*    MK        1.00*    NL        1.00*    
!   OV        1.00*    PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   KP        1.00*    LA        0.97     MK        0.99     NL        0.98     
!   OV        0.97     PT        0.97     SC        1.07     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   KP        1.00*    LA        0.97     MK        1.00     NL        0.99     
!   OV        0.98     PT        0.97     SC        1.09     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   KP        1.00*    LA        0.99     MK        1.00     NL        0.99     
!   OV        0.97     PT        0.96     SC        1.10     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   KP        1.00*    LA        0.97     MK        1.01     NL        0.97     
!   OV        0.97     PT        0.97     SC        1.03     
! 
! 
! Correcting IF 9.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   KP        1.00*    LA        0.97     MK        1.00     NL        0.96     
!   OV        0.98     PT        0.96     SC        1.07     
! 
! 
! Correcting IF 10.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   KP        1.00*    LA        0.99     MK        0.99     NL        0.95     
!   OV        0.96     PT        0.97     SC        1.11     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   KP        1.00*    LA        1.00*    MK        1.00*    NL        1.00*    
!   OV        1.00*    PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   KP        1.00*    LA        1.00*    MK        1.00*    NL        1.00*    
!   OV        1.00*    PT        1.00*    SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.401302Jy  sigma=2.344512
! Fit after  self-cal, rms=0.399127Jy  sigma=2.204394
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6789 mas, bmaj=2.65 mas, bpa=75.55 degrees
! Estimated noise=1.34609 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00768616 Jy
! Component: 100  -  total flux cleaned = -0.0102134 Jy
! Component: 150  -  total flux cleaned = -0.0105131 Jy
! Component: 200  -  total flux cleaned = -0.0107867 Jy
! Total flux subtracted in 200 components = -0.0107867 Jy
! Clean residual min=-0.037649 max=0.037968 Jy/beam
! Clean residual mean=-0.000050 rms=0.008391 Jy/beam
! Combined flux in latest and established models = 1.77646 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 41 components and 1.77646 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.396953Jy  sigma=2.200539
! Fit after  self-cal, rms=0.396507Jy  sigma=2.199239
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.396507Jy  sigma=2.199239
! Fit after  self-cal, rms=0.396355Jy  sigma=2.187699
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6789 mas, bmaj=2.653 mas, bpa=75.53 degrees
! Estimated noise=1.34367 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00416812 Jy
! Component: 100  -  total flux cleaned = -0.0053367 Jy
! Component: 150  -  total flux cleaned = -0.00615876 Jy
! Component: 200  -  total flux cleaned = -0.00652646 Jy
! Total flux subtracted in 200 components = -0.00652646 Jy
! Clean residual min=-0.035761 max=0.035980 Jy/beam
! Clean residual mean=-0.000048 rms=0.008190 Jy/beam
! Combined flux in latest and established models = 1.76993 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 45 components and 1.76993 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.395129Jy  sigma=2.188229
! Fit after  self-cal, rms=0.394959Jy  sigma=2.187709
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000554089 Jy
! Component: 100  -  total flux cleaned = -0.000904644 Jy
! Component: 150  -  total flux cleaned = -0.00107236 Jy
! Component: 200  -  total flux cleaned = -0.00107928 Jy
! Total flux subtracted in 200 components = -0.00107928 Jy
! Clean residual min=-0.035611 max=0.035911 Jy/beam
! Clean residual mean=-0.000049 rms=0.008192 Jy/beam
! Combined flux in latest and established models = 1.76885 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 51 components and 1.76885 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.394678Jy  sigma=2.184842
! Fit after  self-cal, rms=0.394652Jy  sigma=2.184609
! Inverting map 
! Added new window around map position (49, 33.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0343006 Jy
! Component: 100  -  total flux cleaned = 0.0434635 Jy
! Component: 150  -  total flux cleaned = 0.044153 Jy
! Component: 200  -  total flux cleaned = 0.0447653 Jy
! Total flux subtracted in 200 components = 0.0447653 Jy
! Clean residual min=-0.028467 max=0.033441 Jy/beam
! Clean residual mean=-0.000015 rms=0.007147 Jy/beam
! Combined flux in latest and established models = 1.81362 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 81 components and 1.81362 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.383169Jy  sigma=2.116134
! Fit after  self-cal, rms=0.382729Jy  sigma=2.096910
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.382729Jy  sigma=2.096910
! Fit after  self-cal, rms=0.382475Jy  sigma=2.090166
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6775 mas, bmaj=2.649 mas, bpa=75.52 degrees
! Estimated noise=1.34552 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0191768 Jy
! Component: 100  -  total flux cleaned = 0.0219621 Jy
! Component: 150  -  total flux cleaned = 0.0237624 Jy
! Component: 200  -  total flux cleaned = 0.0237679 Jy
! Total flux subtracted in 200 components = 0.0237679 Jy
! Clean residual min=-0.026323 max=0.029288 Jy/beam
! Clean residual mean=-0.000019 rms=0.006586 Jy/beam
! Combined flux in latest and established models = 1.83738 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 91 components and 1.83738 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.373686Jy  sigma=2.064187
! Fit after  self-cal, rms=0.373515Jy  sigma=2.053717
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00694433 Jy
! Component: 100  -  total flux cleaned = 0.00696004 Jy
! Component: 150  -  total flux cleaned = 0.00801336 Jy
! Component: 200  -  total flux cleaned = 0.00802723 Jy
! Total flux subtracted in 200 components = 0.00802723 Jy
! Clean residual min=-0.024168 max=0.027326 Jy/beam
! Clean residual mean=-0.000023 rms=0.006231 Jy/beam
! Combined flux in latest and established models = 1.84541 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 98 components and 1.84541 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.366742Jy  sigma=2.046971
! Fit after  self-cal, rms=0.366725Jy  sigma=2.041975
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.366725Jy  sigma=2.041975
! Fit after  self-cal, rms=0.366433Jy  sigma=2.036373
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.747 mas, bmaj=5.455 mas, bpa=67.22 degrees
! Estimated noise=2.10739 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0128491 Jy
! Component: 100  -  total flux cleaned = 0.0127624 Jy
! Component: 150  -  total flux cleaned = 0.0127278 Jy
! Component: 200  -  total flux cleaned = 0.0121686 Jy
! Total flux subtracted in 200 components = 0.0121686 Jy
! Clean residual min=-0.037050 max=0.058865 Jy/beam
! Clean residual mean=-0.000071 rms=0.013078 Jy/beam
! Combined flux in latest and established models = 1.85758 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 113 components and 1.85758 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.359612Jy  sigma=2.052049
! Fit after  self-cal, rms=0.359418Jy  sigma=2.038664
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00701529 Jy
! Component: 100  -  total flux cleaned = 0.00692444 Jy
! Component: 150  -  total flux cleaned = 0.00748372 Jy
! Component: 200  -  total flux cleaned = 0.00699253 Jy
! Total flux subtracted in 200 components = 0.00699253 Jy
! Clean residual min=-0.035385 max=0.051571 Jy/beam
! Clean residual mean=-0.000078 rms=0.012115 Jy/beam
! Combined flux in latest and established models = 1.86457 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 118 components and 1.86457 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.355555Jy  sigma=2.070769
! Fit after  self-cal, rms=0.355542Jy  sigma=2.065046
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.6764 mas, bmaj=2.646 mas, bpa=75.49 degrees
! Estimated noise=1.34618 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.6764 x 2.646 at 75.49 degrees (North through East)
! Clean map  min=-0.021399  max=1.5118 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.355542Jy  sigma=2.065046
! Fit after  self-cal, rms=0.353251Jy  sigma=1.965422
! Inverting map and beam 
! Estimated beam: bmin=0.6764 mas, bmaj=2.658 mas, bpa=75.25 degrees
! Estimated noise=1.34221 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00664322 Jy
! Component: 100  -  total flux cleaned = -0.00670339 Jy
! Component: 150  -  total flux cleaned = -0.00584364 Jy
! Component: 200  -  total flux cleaned = -0.00506965 Jy
! Total flux subtracted in 200 components = -0.00506965 Jy
! Clean residual min=-0.023885 max=0.026749 Jy/beam
! Clean residual mean=-0.000032 rms=0.005749 Jy/beam
! Combined flux in latest and established models = 1.8595 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 125 components and 1.8595 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.348100Jy  sigma=1.952506
! Fit after  self-cal, rms=0.348230Jy  sigma=1.950788
! Inverting map 
! Added new window around map position (-48.8, -4.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0226309 Jy
! Component: 100  -  total flux cleaned = 0.0254734 Jy
! Component: 150  -  total flux cleaned = 0.0307595 Jy
! Component: 200  -  total flux cleaned = 0.0343327 Jy
! Total flux subtracted in 200 components = 0.0343327 Jy
! Clean residual min=-0.023977 max=0.023440 Jy/beam
! Clean residual mean=-0.000056 rms=0.005573 Jy/beam
! Combined flux in latest and established models = 1.89383 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 145 components and 1.89384 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.341194Jy  sigma=1.926019
! Fit after  self-cal, rms=0.340971Jy  sigma=1.919368
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.340971Jy  sigma=1.919368
! Fit after  self-cal, rms=0.340034Jy  sigma=1.901487
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.5474 mas, bmaj=2.208 mas, bpa=77.01 degrees
! Estimated noise=2.53224 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.12292 Jy
! Component: 100  -  total flux cleaned = 1.42084 Jy
! Component: 150  -  total flux cleaned = 1.58628 Jy
! Component: 200  -  total flux cleaned = 1.70483 Jy
! Total flux subtracted in 200 components = 1.70483 Jy
! Clean residual min=-0.094060 max=0.123661 Jy/beam
! Clean residual mean=-0.000054 rms=0.024324 Jy/beam
! Combined flux in latest and established models = 1.70483 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 29 model components to the UV plane model.
! The established model now contains 29 components and 1.70483 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.6751 mas, bmaj=2.652 mas, bpa=75.25 degrees
! Estimated noise=1.33529 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (5.2, 8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.112511 Jy
! Component: 100  -  total flux cleaned = 0.168934 Jy
! Component: 150  -  total flux cleaned = 0.202971 Jy
! Component: 200  -  total flux cleaned = 0.213662 Jy
! Total flux subtracted in 200 components = 0.213662 Jy
! Clean residual min=-0.028787 max=0.033317 Jy/beam
! Clean residual mean=-0.000048 rms=0.006851 Jy/beam
! Combined flux in latest and established models = 1.91849 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 58 components and 1.91849 Jy
! Inverting map 
! Added new window around map position (10.6, 0).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0299202 Jy
! Component: 100  -  total flux cleaned = 0.0391949 Jy
! Component: 150  -  total flux cleaned = 0.0459852 Jy
! Component: 200  -  total flux cleaned = 0.0491016 Jy
! Total flux subtracted in 200 components = 0.0491016 Jy
! Clean residual min=-0.024410 max=0.026355 Jy/beam
! Clean residual mean=-0.000045 rms=0.005925 Jy/beam
! Combined flux in latest and established models = 1.96759 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 84 components and 1.96759 Jy
! Inverting map 
! Added new window around map position (31.4, -17.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0257123 Jy
! Component: 100  -  total flux cleaned = 0.0365905 Jy
! Component: 150  -  total flux cleaned = 0.0448243 Jy
! Component: 200  -  total flux cleaned = 0.0496697 Jy
! Total flux subtracted in 200 components = 0.0496697 Jy
! Clean residual min=-0.022141 max=0.022388 Jy/beam
! Clean residual mean=-0.000022 rms=0.004976 Jy/beam
! Combined flux in latest and established models = 2.01726 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 108 components and 2.01726 Jy
! Inverting map 
! Added new window around map position (26, 0).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0140226 Jy
! Component: 100  -  total flux cleaned = 0.020619 Jy
! Component: 150  -  total flux cleaned = 0.0257752 Jy
! Component: 200  -  total flux cleaned = 0.0301907 Jy
! Total flux subtracted in 200 components = 0.0301907 Jy
! Clean residual min=-0.021086 max=0.018674 Jy/beam
! Clean residual mean=-0.000027 rms=0.004484 Jy/beam
! Combined flux in latest and established models = 2.04745 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 125 components and 2.04745 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.749 mas, bmaj=5.456 mas, bpa=67.12 degrees
! Estimated noise=2.09171 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0121415 Jy
! Component: 100  -  total flux cleaned = 0.019969 Jy
! Component: 150  -  total flux cleaned = 0.0271337 Jy
! Component: 200  -  total flux cleaned = 0.033804 Jy
! Total flux subtracted in 200 components = 0.033804 Jy
! Clean residual min=-0.023262 max=0.022844 Jy/beam
! Clean residual mean=-0.000033 rms=0.006580 Jy/beam
! Combined flux in latest and established models = 2.08125 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00688746 Jy
! Component: 100  -  total flux cleaned = 0.012788 Jy
! Component: 150  -  total flux cleaned = 0.0178293 Jy
! Component: 200  -  total flux cleaned = 0.0231869 Jy
! Total flux subtracted in 200 components = 0.0231869 Jy
! Clean residual min=-0.020281 max=0.021971 Jy/beam
! Clean residual mean=-0.000025 rms=0.006037 Jy/beam
! Combined flux in latest and established models = 2.10444 Jy
! Adding 64 model components to the UV plane model.
! The established model now contains 181 components and 2.10444 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.6751 mas, bmaj=2.652 mas, bpa=75.25 degrees
! Estimated noise=1.33529 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000231321 Jy
! Component: 100  -  total flux cleaned = 0.002377 Jy
! Component: 150  -  total flux cleaned = 0.00237784 Jy
! Component: 200  -  total flux cleaned = 0.0033147 Jy
! Total flux subtracted in 200 components = 0.0033147 Jy
! Clean residual min=-0.018662 max=0.018232 Jy/beam
! Clean residual mean=-0.000015 rms=0.004070 Jy/beam
! Combined flux in latest and established models = 2.10775 Jy
selfcal
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 207 components and 2.10775 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.308877Jy  sigma=1.829396
! Fit after  self-cal, rms=0.307894Jy  sigma=1.814534
wmodel /J0019+7327_X_map.mod
! wmodel: Unable to open new model file: /J0019+7327_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J0019+7327_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.6751 x 2.652 at 75.25 degrees (North through East)
! Clean map  min=-0.01762  max=1.4298 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J0019+7327_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 1.42978 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.0039077 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.81992 0.81992 1.63984 3.27968 6.55936 13.1187 26.2374 52.4749
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0117 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       1.429 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  365.889 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J0019+7327_X_dfm.log closed on Thu May 19 23:44:27 2016