! Started logfile: /scr/pima/bg219a_uvs/J0013+4051_S_uvs.log on Wed Apr 6 22:38:31 2016 obs /scr/pima/bg219a_uvs/J0013+4051_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219a_uvs/J0013+4051_S_uva.fits ! AN table 1: 18 integrations on 15 of 15 possible baselines. ! Apparent sampling: 0.833333 visibilities/baseline/integration-bin. ! Found source: J0013+4051 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 49 lines of history. ! ! Reading 900 visibilities. select rr, 1,2,3,4,6,7,8 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /scr/pima/bg219a_uvs/J0013+4051_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.059150Jy sigma=27.073317 ! Fit after self-cal, rms=0.731612Jy sigma=18.807242 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.872 mas, bmaj=5.349 mas, bpa=-16.79 degrees ! Estimated noise=1.17719 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.208744 Jy ! Component: 100 - total flux cleaned = 0.255062 Jy ! Total flux subtracted in 100 components = 0.255062 Jy ! Clean residual min=-0.008978 max=0.014943 Jy/beam ! Clean residual mean=0.000014 rms=0.002537 Jy/beam ! Combined flux in latest and established models = 0.255062 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.255062 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053465Jy sigma=1.268134 ! Fit after self-cal, rms=0.053469Jy sigma=1.267990 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.376 mas, bmaj=6.258 mas, bpa=-16.42 degrees ! Estimated noise=0.993434 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0152239 Jy ! Component: 100 - total flux cleaned = 0.020726 Jy ! Component: 150 - total flux cleaned = 0.0229862 Jy ! Component: 200 - total flux cleaned = 0.0233233 Jy ! Total flux subtracted in 200 components = 0.0233233 Jy ! Clean residual min=-0.005491 max=0.006408 Jy/beam ! Clean residual mean=0.000014 rms=0.001557 Jy/beam ! Combined flux in latest and established models = 0.278385 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 24 components and 0.278385 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049464Jy sigma=1.167186 ! Fit after self-cal, rms=0.049468Jy sigma=1.166841 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.376 x 6.258 at -16.42 degrees (North through East) ! Clean map min=-0.0052492 max=0.268 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! LA 1.02 MK 1.00 NL 0.99 OV 1.06 ! PT 0.97 SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! LA 0.99 MK 1.00 NL 1.00 OV 1.01 ! PT 1.00 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! LA 0.98 MK 1.02 NL 1.04 OV 1.00 ! PT 1.03 SC 0.94 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! LA 0.96 MK 1.00 NL 1.00 OV 1.05 ! PT 0.95 SC 0.93 ! ! ! Fit before self-cal, rms=0.049468Jy sigma=1.166841 ! Fit after self-cal, rms=0.047591Jy sigma=1.128557 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.37 mas, bmaj=6.221 mas, bpa=-15.99 degrees ! Estimated noise=0.990083 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000352081 Jy ! Component: 100 - total flux cleaned = 0.00024356 Jy ! Component: 150 - total flux cleaned = 0.000160118 Jy ! Component: 200 - total flux cleaned = 0.000126529 Jy ! Total flux subtracted in 200 components = 0.000126529 Jy ! Clean residual min=-0.004769 max=0.004636 Jy/beam ! Clean residual mean=0.000004 rms=0.001192 Jy/beam ! Combined flux in latest and established models = 0.278512 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 33 components and 0.278512 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.047471Jy sigma=1.125568 ! Fit after self-cal, rms=0.047451Jy sigma=1.125277 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.047451Jy sigma=1.125277 ! Fit after self-cal, rms=0.046828Jy sigma=1.106305 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.368 mas, bmaj=6.229 mas, bpa=-16.02 degrees ! Estimated noise=0.990069 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000477148 Jy ! Component: 100 - total flux cleaned = 0.000669697 Jy ! Component: 150 - total flux cleaned = 0.000758237 Jy ! Component: 200 - total flux cleaned = 0.000818516 Jy ! Total flux subtracted in 200 components = 0.000818516 Jy ! Clean residual min=-0.004002 max=0.003658 Jy/beam ! Clean residual mean=0.000004 rms=0.001024 Jy/beam ! Combined flux in latest and established models = 0.27933 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 40 components and 0.27933 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.046791Jy sigma=1.105613 ! Fit after self-cal, rms=0.046790Jy sigma=1.105440 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.42566e-06 Jy ! Component: 100 - total flux cleaned = 1.28018e-05 Jy ! Component: 150 - total flux cleaned = 6.25041e-05 Jy ! Component: 200 - total flux cleaned = 9.29739e-05 Jy ! Total flux subtracted in 200 components = 9.29739e-05 Jy ! Clean residual min=-0.004007 max=0.003509 Jy/beam ! Clean residual mean=0.000004 rms=0.001014 Jy/beam ! Combined flux in latest and established models = 0.279423 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 48 components and 0.279423 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.046773Jy sigma=1.105065 ! Fit after self-cal, rms=0.046769Jy sigma=1.104976 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.046769Jy sigma=1.104976 ! Fit after self-cal, rms=0.046711Jy sigma=1.104864 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.365 mas, bmaj=6.227 mas, bpa=-16.04 degrees ! Estimated noise=0.990002 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000336167 Jy ! Component: 100 - total flux cleaned = 0.000490996 Jy ! Component: 150 - total flux cleaned = 0.000570438 Jy ! Component: 200 - total flux cleaned = 0.0006285 Jy ! Total flux subtracted in 200 components = 0.0006285 Jy ! Clean residual min=-0.003955 max=0.003434 Jy/beam ! Clean residual mean=0.000004 rms=0.001002 Jy/beam ! Combined flux in latest and established models = 0.280051 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 51 components and 0.280051 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.046693Jy sigma=1.104543 ! Fit after self-cal, rms=0.046690Jy sigma=1.104480 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.01381e-05 Jy ! Component: 100 - total flux cleaned = 4.04985e-05 Jy ! Component: 150 - total flux cleaned = 5.25867e-05 Jy ! Component: 200 - total flux cleaned = 7.55758e-05 Jy ! Total flux subtracted in 200 components = 7.55758e-05 Jy ! Clean residual min=-0.003954 max=0.003430 Jy/beam ! Clean residual mean=0.000004 rms=0.000997 Jy/beam ! Combined flux in latest and established models = 0.280127 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 57 components and 0.280127 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.046680Jy sigma=1.104296 ! Fit after self-cal, rms=0.046679Jy sigma=1.104252 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.046679Jy sigma=1.104252 ! Fit after self-cal, rms=0.046635Jy sigma=1.104181 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.34 mas, bmaj=13 mas, bpa=-15 degrees ! Estimated noise=1.1993 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000914392 Jy ! Component: 100 - total flux cleaned = 0.000916976 Jy ! Component: 150 - total flux cleaned = 0.00101061 Jy ! Component: 200 - total flux cleaned = 0.00107075 Jy ! Total flux subtracted in 200 components = 0.00107075 Jy ! Clean residual min=-0.004370 max=0.003553 Jy/beam ! Clean residual mean=0.000008 rms=0.001237 Jy/beam ! Combined flux in latest and established models = 0.281198 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 58 components and 0.281198 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.046646Jy sigma=1.104593 ! Fit after self-cal, rms=0.046625Jy sigma=1.104220 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.65644e-05 Jy ! Component: 100 - total flux cleaned = 9.63733e-05 Jy ! Component: 150 - total flux cleaned = 0.000124703 Jy ! Component: 200 - total flux cleaned = 0.000135008 Jy ! Total flux subtracted in 200 components = 0.000135008 Jy ! Clean residual min=-0.004316 max=0.003603 Jy/beam ! Clean residual mean=0.000008 rms=0.001233 Jy/beam ! Combined flux in latest and established models = 0.281333 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 68 components and 0.281333 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.046647Jy sigma=1.104584 ! Fit after self-cal, rms=0.046633Jy sigma=1.104303 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.362 mas, bmaj=6.225 mas, bpa=-16.05 degrees ! Estimated noise=0.989992 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.362 x 6.225 at -16.05 degrees (North through East) ! Clean map min=-0.0036947 max=0.26678 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.865 mas, bmaj=5.328 mas, bpa=-16.41 degrees ! Estimated noise=1.1663 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.20677 Jy ! Component: 100 - total flux cleaned = 0.253457 Jy ! Component: 150 - total flux cleaned = 0.267793 Jy ! Component: 200 - total flux cleaned = 0.273909 Jy ! Total flux subtracted in 200 components = 0.273909 Jy ! Clean residual min=-0.005134 max=0.004062 Jy/beam ! Clean residual mean=0.000003 rms=0.001189 Jy/beam ! Combined flux in latest and established models = 0.273909 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.273909 Jy ! Inverting map and beam ! Estimated beam: bmin=3.362 mas, bmaj=6.225 mas, bpa=-16.05 degrees ! Estimated noise=0.989992 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00424115 Jy ! Component: 100 - total flux cleaned = 0.00617588 Jy ! Component: 150 - total flux cleaned = 0.00661198 Jy ! Component: 200 - total flux cleaned = 0.006756 Jy ! Total flux subtracted in 200 components = 0.006756 Jy ! Clean residual min=-0.003981 max=0.003423 Jy/beam ! Clean residual mean=0.000004 rms=0.000996 Jy/beam ! Combined flux in latest and established models = 0.280665 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 35 components and 0.280665 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.34 mas, bmaj=13 mas, bpa=-15 degrees ! Estimated noise=1.1993 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000531906 Jy ! Component: 100 - total flux cleaned = 0.000609799 Jy ! Component: 150 - total flux cleaned = 0.000663227 Jy ! Component: 200 - total flux cleaned = 0.000704489 Jy ! Total flux subtracted in 200 components = 0.000704489 Jy ! Clean residual min=-0.004350 max=0.003664 Jy/beam ! Clean residual mean=0.000007 rms=0.001243 Jy/beam ! Combined flux in latest and established models = 0.281369 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.27512e-05 Jy ! Component: 100 - total flux cleaned = 5.30015e-05 Jy ! Component: 150 - total flux cleaned = 7.88213e-05 Jy ! Component: 200 - total flux cleaned = 8.65916e-05 Jy ! Total flux subtracted in 200 components = 8.65916e-05 Jy ! Clean residual min=-0.004325 max=0.003665 Jy/beam ! Clean residual mean=0.000007 rms=0.001236 Jy/beam ! Combined flux in latest and established models = 0.281456 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 49 components and 0.281456 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.362 mas, bmaj=6.225 mas, bpa=-16.05 degrees ! Estimated noise=0.989992 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000483067 Jy ! Component: 100 - total flux cleaned = -0.00051357 Jy ! Component: 150 - total flux cleaned = -0.000541797 Jy ! Component: 200 - total flux cleaned = -0.000582769 Jy ! Total flux subtracted in 200 components = -0.000582769 Jy ! Clean residual min=-0.003916 max=0.003400 Jy/beam ! Clean residual mean=0.000004 rms=0.000982 Jy/beam ! Combined flux in latest and established models = 0.280873 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 54 components and 0.280873 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.046595Jy sigma=1.103476 ! Fit after self-cal, rms=0.046598Jy sigma=1.103378 wmodel /scr/pima/bg219a_uvs/J0013+4051_S_map.mod ! Writing 54 model components to file: /scr/pima/bg219a_uvs/J0013+4051_S_map.mod wobs /scr/pima/bg219a_uvs/J0013+4051_S_uvs.fits ! Writing UV FITS file: /scr/pima/bg219a_uvs/J0013+4051_S_uvs.fits wwins /scr/pima/bg219a_uvs/J0013+4051_S_map.win ! wwins: Wrote 1 windows to /scr/pima/bg219a_uvs/J0013+4051_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00178928 Jy ! Component: 100 - total flux cleaned = -0.00235626 Jy ! Component: 150 - total flux cleaned = -0.00281559 Jy ! Component: 200 - total flux cleaned = -0.00318861 Jy ! Component: 250 - total flux cleaned = -0.00328987 Jy ! Component: 300 - total flux cleaned = -0.00333853 Jy ! Component: 350 - total flux cleaned = -0.00329106 Jy ! Component: 400 - total flux cleaned = -0.0032024 Jy ! Component: 450 - total flux cleaned = -0.00320186 Jy ! Component: 500 - total flux cleaned = -0.00312018 Jy ! Component: 550 - total flux cleaned = -0.00308068 Jy ! Component: 600 - total flux cleaned = -0.00307982 Jy ! Component: 650 - total flux cleaned = -0.00297142 Jy ! Component: 700 - total flux cleaned = -0.00293694 Jy ! Component: 750 - total flux cleaned = -0.00303714 Jy ! Component: 800 - total flux cleaned = -0.00319738 Jy ! Component: 850 - total flux cleaned = -0.00329066 Jy ! Component: 900 - total flux cleaned = -0.00335072 Jy ! Component: 950 - total flux cleaned = -0.00343898 Jy ! Component: 1000 - total flux cleaned = -0.00349583 Jy ! Component: 1050 - total flux cleaned = -0.00355057 Jy ! Component: 1100 - total flux cleaned = -0.00349632 Jy ! Component: 1150 - total flux cleaned = -0.00349614 Jy ! Component: 1200 - total flux cleaned = -0.00341945 Jy ! Component: 1250 - total flux cleaned = -0.00334407 Jy ! Component: 1300 - total flux cleaned = -0.00324624 Jy ! Component: 1350 - total flux cleaned = -0.00312745 Jy ! Component: 1400 - total flux cleaned = -0.00303479 Jy ! Component: 1450 - total flux cleaned = -0.00303503 Jy ! Component: 1500 - total flux cleaned = -0.00294604 Jy ! Component: 1550 - total flux cleaned = -0.00283747 Jy ! Component: 1600 - total flux cleaned = -0.00279518 Jy ! Component: 1650 - total flux cleaned = -0.00269109 Jy ! Component: 1700 - total flux cleaned = -0.00265031 Jy ! Component: 1750 - total flux cleaned = -0.00260986 Jy ! Component: 1800 - total flux cleaned = -0.00257019 Jy ! Component: 1850 - total flux cleaned = -0.00249287 Jy ! Component: 1900 - total flux cleaned = -0.00247381 Jy ! Component: 1950 - total flux cleaned = -0.00236189 Jy ! Component: 2000 - total flux cleaned = -0.00230711 Jy ! Component: 2050 - total flux cleaned = -0.00223513 Jy ! Component: 2100 - total flux cleaned = -0.00216426 Jy ! Component: 2150 - total flux cleaned = -0.00204165 Jy ! Component: 2200 - total flux cleaned = -0.00193813 Jy ! Component: 2250 - total flux cleaned = -0.00183616 Jy ! Component: 2300 - total flux cleaned = -0.00173558 Jy ! Component: 2350 - total flux cleaned = -0.00158659 Jy ! Component: 2400 - total flux cleaned = -0.00148858 Jy ! Component: 2450 - total flux cleaned = -0.00137558 Jy ! Component: 2500 - total flux cleaned = -0.00123233 Jy ! Component: 2550 - total flux cleaned = -0.0011537 Jy ! Component: 2600 - total flux cleaned = -0.00107574 Jy ! Component: 2650 - total flux cleaned = -0.000968134 Jy ! Component: 2700 - total flux cleaned = -0.000876854 Jy ! Component: 2750 - total flux cleaned = -0.000786612 Jy ! Component: 2800 - total flux cleaned = -0.000712358 Jy ! Component: 2850 - total flux cleaned = -0.000638862 Jy ! Component: 2900 - total flux cleaned = -0.000624227 Jy ! Component: 2950 - total flux cleaned = -0.000580895 Jy ! Component: 3000 - total flux cleaned = -0.000537737 Jy ! Component: 3050 - total flux cleaned = -0.000466693 Jy ! Component: 3100 - total flux cleaned = -0.000452679 Jy ! Component: 3150 - total flux cleaned = -0.000396767 Jy ! Component: 3200 - total flux cleaned = -0.000396808 Jy ! Component: 3250 - total flux cleaned = -0.000355412 Jy ! Component: 3300 - total flux cleaned = -0.000300868 Jy ! Component: 3350 - total flux cleaned = -0.000300816 Jy ! Component: 3400 - total flux cleaned = -0.000273865 Jy ! Component: 3450 - total flux cleaned = -0.000300587 Jy ! Component: 3500 - total flux cleaned = -0.000326971 Jy ! Component: 3550 - total flux cleaned = -0.000313739 Jy ! Component: 3600 - total flux cleaned = -0.000326822 Jy ! Component: 3650 - total flux cleaned = -0.000313697 Jy ! Component: 3700 - total flux cleaned = -0.00032669 Jy ! Component: 3750 - total flux cleaned = -0.000339531 Jy ! Component: 3800 - total flux cleaned = -0.000365049 Jy ! Component: 3850 - total flux cleaned = -0.000301472 Jy ! Component: 3900 - total flux cleaned = -0.000288875 Jy ! Component: 3950 - total flux cleaned = -0.000301442 Jy ! Component: 4000 - total flux cleaned = -0.000263779 Jy ! Component: 4050 - total flux cleaned = -0.000226257 Jy ! Total flux subtracted in 4096 components = -0.000201288 Jy ! Clean residual min=-0.000893 max=0.000699 Jy/beam ! Clean residual mean=-0.000002 rms=0.000205 Jy/beam ! Combined flux in latest and established models = 0.280672 Jy keep ! Adding 219 model components to the UV plane model. ! The established model now contains 273 components and 0.280672 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/bg219a_uvs/J0013+4051_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.362 x 6.225 at -16.05 degrees (North through East) ! Clean map min=-0.002384 max=0.2665 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J0013+4051_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.2665 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000211504 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.238091 0.238091 0.476182 0.952364 1.90473 3.80946 7.61891 15.2378 30.4756 60.9513 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.266 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1260.02 quit ! Quitting program ! Log file /scr/pima/bg219a_uvs/J0013+4051_S_uvs.log closed on Wed Apr 6 22:38:35 2016