! Started logfile: /scr/pima/bg219a_uvs/J0013+4051_S_dfm.log on Thu May 19 23:43:36 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219a_uvs/J0013+4051_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J0013+4051_S_uva.fits
! AN table 1: 18 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.833333 visibilities/baseline/integration-bin.
! Found source: J0013+4051
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 49 lines of history.
! 
! Reading 900 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0013+4051_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.059150Jy  sigma=27.073317
! Fit after  self-cal, rms=0.731612Jy  sigma=18.807242
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.872 mas, bmaj=5.349 mas, bpa=-16.79 degrees
! Estimated noise=1.17719 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.208744 Jy
! Component: 100  -  total flux cleaned = 0.255062 Jy
! Total flux subtracted in 100 components = 0.255062 Jy
! Clean residual min=-0.008978 max=0.014943 Jy/beam
! Clean residual mean=0.000014 rms=0.002537 Jy/beam
! Combined flux in latest and established models = 0.255062 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.255062 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053465Jy  sigma=1.268134
! Fit after  self-cal, rms=0.053469Jy  sigma=1.267990
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.376 mas, bmaj=6.258 mas, bpa=-16.42 degrees
! Estimated noise=0.993434 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0152239 Jy
! Component: 100  -  total flux cleaned = 0.020726 Jy
! Component: 150  -  total flux cleaned = 0.0229862 Jy
! Component: 200  -  total flux cleaned = 0.0233233 Jy
! Total flux subtracted in 200 components = 0.0233233 Jy
! Clean residual min=-0.005491 max=0.006408 Jy/beam
! Clean residual mean=0.000014 rms=0.001557 Jy/beam
! Combined flux in latest and established models = 0.278385 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 24 components and 0.278385 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.049464Jy  sigma=1.167186
! Fit after  self-cal, rms=0.049468Jy  sigma=1.166841
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.376 x 6.258 at -16.42 degrees (North through East)
! Clean map  min=-0.0052492  max=0.268 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.02     MK        1.00     NL        0.99     OV        1.06     
!   PT        0.97     SC        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        1.00     NL        1.00     OV        1.01     
!   PT        1.00     SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        1.02     NL        1.04     OV        1.00     
!   PT        1.03     SC        0.94     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        1.00     NL        1.00     OV        1.05     
!   PT        0.95     SC        0.93     
! 
! 
! Fit before self-cal, rms=0.049468Jy  sigma=1.166841
! Fit after  self-cal, rms=0.047591Jy  sigma=1.128557
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.37 mas, bmaj=6.221 mas, bpa=-15.99 degrees
! Estimated noise=0.990083 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000352081 Jy
! Component: 100  -  total flux cleaned = 0.00024356 Jy
! Component: 150  -  total flux cleaned = 0.000160118 Jy
! Component: 200  -  total flux cleaned = 0.000126529 Jy
! Total flux subtracted in 200 components = 0.000126529 Jy
! Clean residual min=-0.004769 max=0.004636 Jy/beam
! Clean residual mean=0.000004 rms=0.001192 Jy/beam
! Combined flux in latest and established models = 0.278512 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 33 components and 0.278512 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.047471Jy  sigma=1.125568
! Fit after  self-cal, rms=0.047451Jy  sigma=1.125277
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.047451Jy  sigma=1.125277
! Fit after  self-cal, rms=0.046828Jy  sigma=1.106305
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.368 mas, bmaj=6.229 mas, bpa=-16.02 degrees
! Estimated noise=0.990069 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000477148 Jy
! Component: 100  -  total flux cleaned = 0.000669697 Jy
! Component: 150  -  total flux cleaned = 0.000758237 Jy
! Component: 200  -  total flux cleaned = 0.000818516 Jy
! Total flux subtracted in 200 components = 0.000818516 Jy
! Clean residual min=-0.004002 max=0.003658 Jy/beam
! Clean residual mean=0.000004 rms=0.001024 Jy/beam
! Combined flux in latest and established models = 0.27933 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 40 components and 0.27933 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.046791Jy  sigma=1.105613
! Fit after  self-cal, rms=0.046790Jy  sigma=1.105440
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.42566e-06 Jy
! Component: 100  -  total flux cleaned = 1.28018e-05 Jy
! Component: 150  -  total flux cleaned = 6.25041e-05 Jy
! Component: 200  -  total flux cleaned = 9.29739e-05 Jy
! Total flux subtracted in 200 components = 9.29739e-05 Jy
! Clean residual min=-0.004007 max=0.003509 Jy/beam
! Clean residual mean=0.000004 rms=0.001014 Jy/beam
! Combined flux in latest and established models = 0.279423 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 48 components and 0.279423 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.046773Jy  sigma=1.105065
! Fit after  self-cal, rms=0.046769Jy  sigma=1.104976
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.046769Jy  sigma=1.104976
! Fit after  self-cal, rms=0.046711Jy  sigma=1.104864
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.365 mas, bmaj=6.227 mas, bpa=-16.04 degrees
! Estimated noise=0.990002 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000336167 Jy
! Component: 100  -  total flux cleaned = 0.000490996 Jy
! Component: 150  -  total flux cleaned = 0.000570438 Jy
! Component: 200  -  total flux cleaned = 0.0006285 Jy
! Total flux subtracted in 200 components = 0.0006285 Jy
! Clean residual min=-0.003955 max=0.003434 Jy/beam
! Clean residual mean=0.000004 rms=0.001002 Jy/beam
! Combined flux in latest and established models = 0.280051 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 51 components and 0.280051 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.046693Jy  sigma=1.104543
! Fit after  self-cal, rms=0.046690Jy  sigma=1.104480
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.01381e-05 Jy
! Component: 100  -  total flux cleaned = 4.04985e-05 Jy
! Component: 150  -  total flux cleaned = 5.25867e-05 Jy
! Component: 200  -  total flux cleaned = 7.55758e-05 Jy
! Total flux subtracted in 200 components = 7.55758e-05 Jy
! Clean residual min=-0.003954 max=0.003430 Jy/beam
! Clean residual mean=0.000004 rms=0.000997 Jy/beam
! Combined flux in latest and established models = 0.280127 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 57 components and 0.280127 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.046680Jy  sigma=1.104296
! Fit after  self-cal, rms=0.046679Jy  sigma=1.104252
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.046679Jy  sigma=1.104252
! Fit after  self-cal, rms=0.046635Jy  sigma=1.104181
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.34 mas, bmaj=13 mas, bpa=-15 degrees
! Estimated noise=1.1993 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000914392 Jy
! Component: 100  -  total flux cleaned = 0.000916976 Jy
! Component: 150  -  total flux cleaned = 0.00101061 Jy
! Component: 200  -  total flux cleaned = 0.00107075 Jy
! Total flux subtracted in 200 components = 0.00107075 Jy
! Clean residual min=-0.004370 max=0.003553 Jy/beam
! Clean residual mean=0.000008 rms=0.001237 Jy/beam
! Combined flux in latest and established models = 0.281198 Jy
selfcal
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 58 components and 0.281198 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.046646Jy  sigma=1.104593
! Fit after  self-cal, rms=0.046625Jy  sigma=1.104220
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.65644e-05 Jy
! Component: 100  -  total flux cleaned = 9.63733e-05 Jy
! Component: 150  -  total flux cleaned = 0.000124703 Jy
! Component: 200  -  total flux cleaned = 0.000135008 Jy
! Total flux subtracted in 200 components = 0.000135008 Jy
! Clean residual min=-0.004316 max=0.003603 Jy/beam
! Clean residual mean=0.000008 rms=0.001233 Jy/beam
! Combined flux in latest and established models = 0.281333 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 68 components and 0.281333 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.046647Jy  sigma=1.104584
! Fit after  self-cal, rms=0.046633Jy  sigma=1.104303
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.362 mas, bmaj=6.225 mas, bpa=-16.05 degrees
! Estimated noise=0.989992 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.362 x 6.225 at -16.05 degrees (North through East)
! Clean map  min=-0.0036947  max=0.26678 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.865 mas, bmaj=5.328 mas, bpa=-16.41 degrees
! Estimated noise=1.1663 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.20677 Jy
! Component: 100  -  total flux cleaned = 0.253457 Jy
! Component: 150  -  total flux cleaned = 0.267793 Jy
! Component: 200  -  total flux cleaned = 0.273909 Jy
! Total flux subtracted in 200 components = 0.273909 Jy
! Clean residual min=-0.005134 max=0.004062 Jy/beam
! Clean residual mean=0.000003 rms=0.001189 Jy/beam
! Combined flux in latest and established models = 0.273909 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 23 model components to the UV plane model.
! The established model now contains 23 components and 0.273909 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.362 mas, bmaj=6.225 mas, bpa=-16.05 degrees
! Estimated noise=0.989992 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00424115 Jy
! Component: 100  -  total flux cleaned = 0.00617588 Jy
! Component: 150  -  total flux cleaned = 0.00661198 Jy
! Component: 200  -  total flux cleaned = 0.006756 Jy
! Total flux subtracted in 200 components = 0.006756 Jy
! Clean residual min=-0.003981 max=0.003423 Jy/beam
! Clean residual mean=0.000004 rms=0.000996 Jy/beam
! Combined flux in latest and established models = 0.280665 Jy
! Adding 20 model components to the UV plane model.
! The established model now contains 35 components and 0.280665 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.34 mas, bmaj=13 mas, bpa=-15 degrees
! Estimated noise=1.1993 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000531906 Jy
! Component: 100  -  total flux cleaned = 0.000609799 Jy
! Component: 150  -  total flux cleaned = 0.000663227 Jy
! Component: 200  -  total flux cleaned = 0.000704489 Jy
! Total flux subtracted in 200 components = 0.000704489 Jy
! Clean residual min=-0.004350 max=0.003664 Jy/beam
! Clean residual mean=0.000007 rms=0.001243 Jy/beam
! Combined flux in latest and established models = 0.281369 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.27512e-05 Jy
! Component: 100  -  total flux cleaned = 5.30015e-05 Jy
! Component: 150  -  total flux cleaned = 7.88213e-05 Jy
! Component: 200  -  total flux cleaned = 8.65916e-05 Jy
! Total flux subtracted in 200 components = 8.65916e-05 Jy
! Clean residual min=-0.004325 max=0.003665 Jy/beam
! Clean residual mean=0.000007 rms=0.001236 Jy/beam
! Combined flux in latest and established models = 0.281456 Jy
! Adding 15 model components to the UV plane model.
! The established model now contains 49 components and 0.281456 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.362 mas, bmaj=6.225 mas, bpa=-16.05 degrees
! Estimated noise=0.989992 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000483067 Jy
! Component: 100  -  total flux cleaned = -0.00051357 Jy
! Component: 150  -  total flux cleaned = -0.000541797 Jy
! Component: 200  -  total flux cleaned = -0.000582769 Jy
! Total flux subtracted in 200 components = -0.000582769 Jy
! Clean residual min=-0.003916 max=0.003400 Jy/beam
! Clean residual mean=0.000004 rms=0.000982 Jy/beam
! Combined flux in latest and established models = 0.280873 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 54 components and 0.280873 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.046595Jy  sigma=1.103476
! Fit after  self-cal, rms=0.046598Jy  sigma=1.103378
wmodel /J0013+4051_S_map.mod
! wmodel: Unable to open new model file: /J0013+4051_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J0013+4051_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.362 x 6.225 at -16.05 degrees (North through East)
! Clean map  min=-0.0037777  max=0.26642 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J0013+4051_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.266419 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000980326 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.10389 1.10389 2.20779 4.41558 8.83115 17.6623 35.3246 70.6492
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0029 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.266 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  271.765 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J0013+4051_S_dfm.log closed on Thu May 19 23:43:38 2016