! Started logfile: /scr/pima/bg219a_uvs/J0005+5428_X_dfm.log on Thu May 19 23:43:15 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219a_uvs/J0005+5428_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J0005+5428_X_uva.fits
! AN table 1: 42 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.833333 visibilities/baseline/integration-bin.
! Found source: J0005+5428
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 6300 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0005+5428_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.022332Jy  sigma=27.312253
! Fit after  self-cal, rms=0.800762Jy  sigma=21.036879
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7075 mas, bmaj=0.9043 mas, bpa=-73.62 degrees
! Estimated noise=0.810192 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.145398 Jy
! Component: 100  -  total flux cleaned = 0.191523 Jy
! Total flux subtracted in 100 components = 0.191523 Jy
! Clean residual min=-0.012976 max=0.018763 Jy/beam
! Clean residual mean=-0.000067 rms=0.003196 Jy/beam
! Combined flux in latest and established models = 0.191523 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.191523 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074268Jy  sigma=2.030321
! Fit after  self-cal, rms=0.074294Jy  sigma=2.028287
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0191482 Jy
! Component: 100  -  total flux cleaned = 0.028874 Jy
! Total flux subtracted in 100 components = 0.028874 Jy
! Clean residual min=-0.009425 max=0.010236 Jy/beam
! Clean residual mean=-0.000046 rms=0.002339 Jy/beam
! Combined flux in latest and established models = 0.220397 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 16 components and 0.220397 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065620Jy  sigma=1.739076
! Fit after  self-cal, rms=0.065625Jy  sigma=1.738192
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9209 mas, bmaj=1.138 mas, bpa=-84.64 degrees
! Estimated noise=0.348481 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0176616 Jy
! Component: 100  -  total flux cleaned = 0.0274982 Jy
! Component: 150  -  total flux cleaned = 0.0335815 Jy
! Component: 200  -  total flux cleaned = 0.0374042 Jy
! Total flux subtracted in 200 components = 0.0374042 Jy
! Clean residual min=-0.007111 max=0.012763 Jy/beam
! Clean residual mean=-0.000080 rms=0.002044 Jy/beam
! Combined flux in latest and established models = 0.257801 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 23 components and 0.257801 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061524Jy  sigma=1.583468
! Fit after  self-cal, rms=0.061476Jy  sigma=1.581797
! Inverting map 
! Added new window around map position (-0.4, -1.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0113226 Jy
! Component: 100  -  total flux cleaned = 0.015738 Jy
! Component: 150  -  total flux cleaned = 0.0173961 Jy
! Component: 200  -  total flux cleaned = 0.0176364 Jy
! Total flux subtracted in 200 components = 0.0176364 Jy
! Clean residual min=-0.004424 max=0.004856 Jy/beam
! Clean residual mean=-0.000021 rms=0.001037 Jy/beam
! Combined flux in latest and established models = 0.275437 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 45 components and 0.275437 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059654Jy  sigma=1.527500
! Fit after  self-cal, rms=0.059454Jy  sigma=1.521079
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9209 x 1.138 at -84.64 degrees (North through East)
! Clean map  min=-0.0038327  max=0.19851 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.95     MK        1.03     NL        1.01     OV        1.02     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        1.04     NL        1.00     OV        1.01     
!   PT        0.98     SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        1.02     NL        1.01     OV        1.01     
!   PT        0.98     SC        1.02     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        0.99     NL        1.00     OV        1.01     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        0.99     NL        1.03     OV        1.00     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        1.04     NL        0.99     OV        1.02     
!   PT        0.96     SC        1.02     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        1.02     NL        1.00     OV        0.98     
!   PT        1.04     SC        1.05     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        1.05     NL        1.00     OV        1.02     
!   PT        0.98     SC        1.04     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        1.03     NL        0.99     OV        1.01     
!   PT        0.96     SC        1.04     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        1.03     NL        1.00     OV        0.99     
!   PT        1.02     SC        1.02     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        1.00     NL        0.98     OV        1.04     
!   PT        1.01     SC        1.00     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        1.01     NL        1.01     OV        1.03     
!   PT        0.99     SC        1.02     
! 
! 
! Fit before self-cal, rms=0.059454Jy  sigma=1.521079
! Fit after  self-cal, rms=0.059982Jy  sigma=1.511942
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9278 mas, bmaj=1.147 mas, bpa=-84.43 degrees
! Estimated noise=0.350437 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000102504 Jy
! Component: 100  -  total flux cleaned = 0.000179825 Jy
! Component: 150  -  total flux cleaned = 0.000124929 Jy
! Component: 200  -  total flux cleaned = 7.78094e-05 Jy
! Total flux subtracted in 200 components = 7.78094e-05 Jy
! Clean residual min=-0.002744 max=0.002586 Jy/beam
! Clean residual mean=0.000012 rms=0.000617 Jy/beam
! Combined flux in latest and established models = 0.275515 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 58 components and 0.275515 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059838Jy  sigma=1.508151
! Fit after  self-cal, rms=0.059841Jy  sigma=1.507910
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059841Jy  sigma=1.507910
! Fit after  self-cal, rms=0.060030Jy  sigma=1.500292
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9268 mas, bmaj=1.146 mas, bpa=-84.61 degrees
! Estimated noise=0.350569 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000260656 Jy
! Component: 100  -  total flux cleaned = -0.000120948 Jy
! Component: 150  -  total flux cleaned = -0.000374434 Jy
! Component: 200  -  total flux cleaned = -0.000495591 Jy
! Total flux subtracted in 200 components = -0.000495591 Jy
! Clean residual min=-0.001858 max=0.002169 Jy/beam
! Clean residual mean=0.000002 rms=0.000424 Jy/beam
! Combined flux in latest and established models = 0.27502 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 68 components and 0.27502 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060006Jy  sigma=1.499620
! Fit after  self-cal, rms=0.060020Jy  sigma=1.499552
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (30, 11.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00105888 Jy
! Component: 100  -  total flux cleaned = 0.000964668 Jy
! Component: 150  -  total flux cleaned = 0.000998125 Jy
! Component: 200  -  total flux cleaned = 0.00102522 Jy
! Total flux subtracted in 200 components = 0.00102522 Jy
! Clean residual min=-0.001772 max=0.001819 Jy/beam
! Clean residual mean=-0.000001 rms=0.000374 Jy/beam
! Combined flux in latest and established models = 0.276045 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 78 components and 0.276045 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059931Jy  sigma=1.498031
! Fit after  self-cal, rms=0.059926Jy  sigma=1.497928
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059926Jy  sigma=1.497928
! Fit after  self-cal, rms=0.059923Jy  sigma=1.497783
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9272 mas, bmaj=1.146 mas, bpa=-84.9 degrees
! Estimated noise=0.350155 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00041413 Jy
! Component: 100  -  total flux cleaned = 0.000410182 Jy
! Component: 150  -  total flux cleaned = 0.000456075 Jy
! Component: 200  -  total flux cleaned = 0.000499427 Jy
! Total flux subtracted in 200 components = 0.000499427 Jy
! Clean residual min=-0.001727 max=0.001785 Jy/beam
! Clean residual mean=0.000000 rms=0.000352 Jy/beam
! Combined flux in latest and established models = 0.276544 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 86 components and 0.276544 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059898Jy  sigma=1.497388
! Fit after  self-cal, rms=0.059897Jy  sigma=1.497360
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (46.8, 45.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000845537 Jy
! Component: 100  -  total flux cleaned = 0.000609479 Jy
! Component: 150  -  total flux cleaned = 0.000703624 Jy
! Component: 200  -  total flux cleaned = 0.00062075 Jy
! Total flux subtracted in 200 components = 0.00062075 Jy
! Clean residual min=-0.001406 max=0.001590 Jy/beam
! Clean residual mean=-0.000002 rms=0.000338 Jy/beam
! Combined flux in latest and established models = 0.277165 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 99 components and 0.277165 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059833Jy  sigma=1.495962
! Fit after  self-cal, rms=0.059832Jy  sigma=1.495859
! Inverting map 
! Added new window around map position (-42, -46.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000323009 Jy
! Component: 100  -  total flux cleaned = 8.37416e-05 Jy
! Component: 150  -  total flux cleaned = 5.11277e-05 Jy
! Component: 200  -  total flux cleaned = -6.73361e-05 Jy
! Total flux subtracted in 200 components = -6.73361e-05 Jy
! Clean residual min=-0.001592 max=0.001433 Jy/beam
! Clean residual mean=-0.000003 rms=0.000325 Jy/beam
! Combined flux in latest and established models = 0.277098 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 112 components and 0.277098 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059773Jy  sigma=1.494627
! Fit after  self-cal, rms=0.059770Jy  sigma=1.494544
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059770Jy  sigma=1.494544
! Fit after  self-cal, rms=0.059774Jy  sigma=1.494381
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.064 mas, bmaj=2.61 mas, bpa=-83.16 degrees
! Estimated noise=0.440214 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.11027e-05 Jy
! Component: 100  -  total flux cleaned = 2.35871e-06 Jy
! Component: 150  -  total flux cleaned = 6.00301e-05 Jy
! Component: 200  -  total flux cleaned = 0.000112215 Jy
! Total flux subtracted in 200 components = 0.000112215 Jy
! Clean residual min=-0.001273 max=0.001116 Jy/beam
! Clean residual mean=-0.000001 rms=0.000295 Jy/beam
! Combined flux in latest and established models = 0.27721 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 131 components and 0.27721 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059770Jy  sigma=1.494237
! Fit after  self-cal, rms=0.059770Jy  sigma=1.494223
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000139405 Jy
! Component: 100  -  total flux cleaned = 0.000202589 Jy
! Component: 150  -  total flux cleaned = 0.000202172 Jy
! Component: 200  -  total flux cleaned = 0.000187283 Jy
! Total flux subtracted in 200 components = 0.000187283 Jy
! Clean residual min=-0.001253 max=0.001108 Jy/beam
! Clean residual mean=0.000001 rms=0.000292 Jy/beam
! Combined flux in latest and established models = 0.277397 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 136 components and 0.277397 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059767Jy  sigma=1.494122
! Fit after  self-cal, rms=0.059767Jy  sigma=1.494115
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9274 mas, bmaj=1.147 mas, bpa=-84.83 degrees
! Estimated noise=0.350103 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9274 x 1.147 at -84.83 degrees (North through East)
! Clean map  min=-0.0017902  max=0.19868 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7105 mas, bmaj=0.9095 mas, bpa=-73.43 degrees
! Estimated noise=0.824042 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.147732 Jy
! Component: 100  -  total flux cleaned = 0.194571 Jy
! Component: 150  -  total flux cleaned = 0.214044 Jy
! Component: 200  -  total flux cleaned = 0.224722 Jy
! Total flux subtracted in 200 components = 0.224722 Jy
! Clean residual min=-0.007892 max=0.008504 Jy/beam
! Clean residual mean=-0.000037 rms=0.002061 Jy/beam
! Combined flux in latest and established models = 0.224722 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.224722 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9274 mas, bmaj=1.147 mas, bpa=-84.83 degrees
! Estimated noise=0.350103 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0172221 Jy
! Component: 100  -  total flux cleaned = 0.0276376 Jy
! Component: 150  -  total flux cleaned = 0.0343465 Jy
! Component: 200  -  total flux cleaned = 0.0387207 Jy
! Total flux subtracted in 200 components = 0.0387207 Jy
! Clean residual min=-0.002663 max=0.003114 Jy/beam
! Clean residual mean=-0.000030 rms=0.000760 Jy/beam
! Combined flux in latest and established models = 0.263442 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 31 components and 0.263442 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.064 mas, bmaj=2.61 mas, bpa=-83.16 degrees
! Estimated noise=0.440214 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0047236 Jy
! Component: 100  -  total flux cleaned = 0.0068767 Jy
! Component: 150  -  total flux cleaned = 0.00817422 Jy
! Component: 200  -  total flux cleaned = 0.00916386 Jy
! Total flux subtracted in 200 components = 0.00916386 Jy
! Clean residual min=-0.001640 max=0.001750 Jy/beam
! Clean residual mean=-0.000013 rms=0.000447 Jy/beam
! Combined flux in latest and established models = 0.272606 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000574024 Jy
! Component: 100  -  total flux cleaned = 0.000908214 Jy
! Component: 150  -  total flux cleaned = 0.00118042 Jy
! Component: 200  -  total flux cleaned = 0.0013378 Jy
! Total flux subtracted in 200 components = 0.0013378 Jy
! Clean residual min=-0.001282 max=0.001457 Jy/beam
! Clean residual mean=-0.000009 rms=0.000368 Jy/beam
! Combined flux in latest and established models = 0.273944 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 62 components and 0.273944 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9274 mas, bmaj=1.147 mas, bpa=-84.83 degrees
! Estimated noise=0.350103 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00100045 Jy
! Component: 100  -  total flux cleaned = 0.001067 Jy
! Component: 150  -  total flux cleaned = 0.000843025 Jy
! Component: 200  -  total flux cleaned = 0.000688948 Jy
! Total flux subtracted in 200 components = 0.000688948 Jy
! Clean residual min=-0.001498 max=0.001902 Jy/beam
! Clean residual mean=-0.000005 rms=0.000379 Jy/beam
! Combined flux in latest and established models = 0.274633 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 83 components and 0.274633 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059917Jy  sigma=1.496828
! Fit after  self-cal, rms=0.059896Jy  sigma=1.496591
wmodel /J0005+5428_X_map.mod
! wmodel: Unable to open new model file: /J0005+5428_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J0005+5428_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9274 x 1.147 at -84.83 degrees (North through East)
! Clean map  min=-0.0013361  max=0.20384 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J0005+5428_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.203844 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000370265 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.544925 0.544925 1.08985 2.1797 4.3594 8.7188 17.4376 34.8752 69.7504
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0011 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.203 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  550.534 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J0005+5428_X_dfm.log closed on Thu May 19 23:43:18 2016