! Started logfile: J2359+3850_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:39:06 2017 obs J2359+3850_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J2359+3850_S_2014_01_04_pus_uva.fits ! AN table 1: 58 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.425766 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2359+3850 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 3556 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2359+3850_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 174 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 174 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 174 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 174 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.624492Jy sigma=0.010266 ! Fit after self-cal, rms=0.613766Jy sigma=0.010078 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.15 mas, bmaj=4.935 mas, bpa=1.624 degrees ! Estimated noise=1222.59 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.294352 Jy ! Component: 100 - total flux cleaned = 0.368083 Jy ! Total flux subtracted in 100 components = 0.368083 Jy ! Clean residual min=-0.017454 max=0.029536 Jy/beam ! Clean residual mean=0.000049 rms=0.005058 Jy/beam ! Combined flux in latest and established models = 0.368083 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.368083 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096230Jy sigma=0.001283 ! Fit after self-cal, rms=0.096197Jy sigma=0.001283 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.787 mas, bmaj=5.573 mas, bpa=15.25 degrees ! Estimated noise=782.701 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0309719 Jy ! Component: 100 - total flux cleaned = 0.0450882 Jy ! Component: 150 - total flux cleaned = 0.0542434 Jy ! Component: 200 - total flux cleaned = 0.0604905 Jy ! Total flux subtracted in 200 components = 0.0604905 Jy ! Clean residual min=-0.012393 max=0.016059 Jy/beam ! Clean residual mean=-0.000001 rms=0.003483 Jy/beam ! Combined flux in latest and established models = 0.428573 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 27 components and 0.428573 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082434Jy sigma=0.001175 ! Fit after self-cal, rms=0.082368Jy sigma=0.001175 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00* KP 1.00* LA 1.01 ! MK 1.02 NL 0.96 OV 0.98 PT 1.00 ! SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 1.00* KP 1.00* LA 0.99 ! MK 1.03 NL 1.03 OV 1.02 PT 0.97 ! SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00* KP 1.00* LA 0.81 ! MK 1.03 NL 0.98 OV 0.93 PT 0.95 ! SC 0.97 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.19 FD 1.00* KP 1.00* LA 0.87 ! MK 1.03 NL 1.08 OV 1.01 PT 0.99 ! SC 0.93 ! ! ! Fit before self-cal, rms=0.082368Jy sigma=0.001175 ! Fit after self-cal, rms=0.066715Jy sigma=0.000940 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.761 mas, bmaj=5.646 mas, bpa=15.5 degrees ! Estimated noise=785.564 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00104671 Jy ! Component: 100 - total flux cleaned = -0.00125382 Jy ! Component: 150 - total flux cleaned = -0.00147719 Jy ! Component: 200 - total flux cleaned = -0.00167153 Jy ! Total flux subtracted in 200 components = -0.00167153 Jy ! Clean residual min=-0.003218 max=0.003543 Jy/beam ! Clean residual mean=0.000003 rms=0.000884 Jy/beam ! Combined flux in latest and established models = 0.426902 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 35 components and 0.426902 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066568Jy sigma=0.000938 ! Fit after self-cal, rms=0.066253Jy sigma=0.000938 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066253Jy sigma=0.000938 ! Fit after self-cal, rms=0.065868Jy sigma=0.000933 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.759 mas, bmaj=5.649 mas, bpa=15.42 degrees ! Estimated noise=784.743 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000660026 Jy ! Component: 100 - total flux cleaned = -0.000969102 Jy ! Component: 150 - total flux cleaned = -0.00115286 Jy ! Component: 200 - total flux cleaned = -0.00131447 Jy ! Total flux subtracted in 200 components = -0.00131447 Jy ! Clean residual min=-0.002913 max=0.002971 Jy/beam ! Clean residual mean=0.000004 rms=0.000739 Jy/beam ! Combined flux in latest and established models = 0.425587 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 39 components and 0.425587 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065800Jy sigma=0.000932 ! Fit after self-cal, rms=0.065796Jy sigma=0.000932 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000394785 Jy ! Component: 100 - total flux cleaned = -0.000424098 Jy ! Component: 150 - total flux cleaned = -0.000527704 Jy ! Component: 200 - total flux cleaned = -0.000648399 Jy ! Total flux subtracted in 200 components = -0.000648399 Jy ! Clean residual min=-0.002811 max=0.002902 Jy/beam ! Clean residual mean=0.000003 rms=0.000725 Jy/beam ! Combined flux in latest and established models = 0.424939 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 42 components and 0.424939 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065758Jy sigma=0.000932 ! Fit after self-cal, rms=0.065758Jy sigma=0.000932 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065758Jy sigma=0.000932 ! Fit after self-cal, rms=0.065643Jy sigma=0.000932 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.757 mas, bmaj=5.648 mas, bpa=15.37 degrees ! Estimated noise=784.431 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000485612 Jy ! Component: 100 - total flux cleaned = -0.000546407 Jy ! Component: 150 - total flux cleaned = -0.000683106 Jy ! Component: 200 - total flux cleaned = -0.000808223 Jy ! Total flux subtracted in 200 components = -0.000808223 Jy ! Clean residual min=-0.002891 max=0.002784 Jy/beam ! Clean residual mean=0.000003 rms=0.000694 Jy/beam ! Combined flux in latest and established models = 0.424131 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 44 components and 0.424131 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065607Jy sigma=0.000931 ! Fit after self-cal, rms=0.065598Jy sigma=0.000931 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000334538 Jy ! Component: 100 - total flux cleaned = -0.000331448 Jy ! Component: 150 - total flux cleaned = -0.000373287 Jy ! Component: 200 - total flux cleaned = -0.000451894 Jy ! Total flux subtracted in 200 components = -0.000451894 Jy ! Clean residual min=-0.002793 max=0.002796 Jy/beam ! Clean residual mean=0.000003 rms=0.000685 Jy/beam ! Combined flux in latest and established models = 0.423679 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 47 components and 0.423679 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065574Jy sigma=0.000931 ! Fit after self-cal, rms=0.065576Jy sigma=0.000931 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065576Jy sigma=0.000931 ! Fit after self-cal, rms=0.065485Jy sigma=0.000931 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.395 mas, bmaj=9.579 mas, bpa=34.39 degrees ! Estimated noise=900.641 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000743397 Jy ! Component: 100 - total flux cleaned = -0.000856232 Jy ! Component: 150 - total flux cleaned = -0.000936235 Jy ! Component: 200 - total flux cleaned = -0.0010098 Jy ! Total flux subtracted in 200 components = -0.0010098 Jy ! Clean residual min=-0.002422 max=0.002325 Jy/beam ! Clean residual mean=0.000005 rms=0.000693 Jy/beam ! Combined flux in latest and established models = 0.422669 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 50 components and 0.422669 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065473Jy sigma=0.000931 ! Fit after self-cal, rms=0.065467Jy sigma=0.000931 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.91231e-05 Jy ! Component: 100 - total flux cleaned = -9.83598e-05 Jy ! Component: 150 - total flux cleaned = -0.000158854 Jy ! Component: 200 - total flux cleaned = -0.000215566 Jy ! Total flux subtracted in 200 components = -0.000215566 Jy ! Clean residual min=-0.002349 max=0.002369 Jy/beam ! Clean residual mean=0.000005 rms=0.000685 Jy/beam ! Combined flux in latest and established models = 0.422453 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 52 components and 0.422453 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065464Jy sigma=0.000931 ! Fit after self-cal, rms=0.065466Jy sigma=0.000931 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.755 mas, bmaj=5.648 mas, bpa=15.32 degrees ! Estimated noise=784.161 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.755 x 5.648 at 15.32 degrees (North through East) ! Clean map min=-0.0026595 max=0.38109 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.13 mas, bmaj=4.997 mas, bpa=1.534 degrees ! Estimated noise=1222.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.294223 Jy ! Component: 100 - total flux cleaned = 0.366385 Jy ! Component: 150 - total flux cleaned = 0.394713 Jy ! Component: 200 - total flux cleaned = 0.407719 Jy ! Total flux subtracted in 200 components = 0.407719 Jy ! Clean residual min=-0.005656 max=0.006496 Jy/beam ! Clean residual mean=0.000012 rms=0.001441 Jy/beam ! Combined flux in latest and established models = 0.407719 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.407719 Jy ! Inverting map and beam ! Estimated beam: bmin=3.755 mas, bmaj=5.648 mas, bpa=15.32 degrees ! Estimated noise=784.161 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0065703 Jy ! Component: 100 - total flux cleaned = 0.00953921 Jy ! Component: 150 - total flux cleaned = 0.0112642 Jy ! Component: 200 - total flux cleaned = 0.0123259 Jy ! Total flux subtracted in 200 components = 0.0123259 Jy ! Clean residual min=-0.002423 max=0.002846 Jy/beam ! Clean residual mean=0.000001 rms=0.000683 Jy/beam ! Combined flux in latest and established models = 0.420045 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 38 components and 0.420045 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.395 mas, bmaj=9.579 mas, bpa=34.39 degrees ! Estimated noise=900.641 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000804323 Jy ! Component: 100 - total flux cleaned = 0.000928961 Jy ! Component: 150 - total flux cleaned = 0.0010585 Jy ! Component: 200 - total flux cleaned = 0.00115256 Jy ! Total flux subtracted in 200 components = 0.00115256 Jy ! Clean residual min=-0.002212 max=0.002844 Jy/beam ! Clean residual mean=0.000003 rms=0.000701 Jy/beam ! Combined flux in latest and established models = 0.421198 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.71656e-05 Jy ! Component: 100 - total flux cleaned = 0.00014343 Jy ! Component: 150 - total flux cleaned = 0.000198537 Jy ! Component: 200 - total flux cleaned = 0.000260624 Jy ! Total flux subtracted in 200 components = 0.000260624 Jy ! Clean residual min=-0.002190 max=0.002717 Jy/beam ! Clean residual mean=0.000003 rms=0.000693 Jy/beam ! Combined flux in latest and established models = 0.421458 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 42 components and 0.421458 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.755 mas, bmaj=5.648 mas, bpa=15.32 degrees ! Estimated noise=784.161 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.53921e-05 Jy ! Component: 100 - total flux cleaned = -0.00012405 Jy ! Component: 150 - total flux cleaned = -6.73897e-05 Jy ! Component: 200 - total flux cleaned = -4.3918e-05 Jy ! Total flux subtracted in 200 components = -4.3918e-05 Jy ! Clean residual min=-0.002300 max=0.002731 Jy/beam ! Clean residual mean=0.000002 rms=0.000657 Jy/beam ! Combined flux in latest and established models = 0.421414 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 51 components and 0.421414 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065434Jy sigma=0.000931 ! Fit after self-cal, rms=0.065439Jy sigma=0.000931 wmodel J2359+3850_S_2014_01_04_pus_map.mod ! Writing 51 model components to file: J2359+3850_S_2014_01_04_pus_map.mod wobs J2359+3850_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J2359+3850_S_2014_01_04_pus_uvs.fits wwins J2359+3850_S_2014_01_04_pus_map.win ! wwins: Wrote 1 windows to J2359+3850_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00121683 Jy ! Component: 100 - total flux cleaned = 0.00173569 Jy ! Component: 150 - total flux cleaned = 0.00185475 Jy ! Component: 200 - total flux cleaned = 0.00185382 Jy ! Component: 250 - total flux cleaned = 0.0019253 Jy ! Component: 300 - total flux cleaned = 0.0018227 Jy ! Component: 350 - total flux cleaned = 0.0016249 Jy ! Component: 400 - total flux cleaned = 0.00143367 Jy ! Component: 450 - total flux cleaned = 0.00124863 Jy ! Component: 500 - total flux cleaned = 0.00109966 Jy ! Component: 550 - total flux cleaned = 0.000926386 Jy ! Component: 600 - total flux cleaned = 0.000729837 Jy ! Component: 650 - total flux cleaned = 0.000538379 Jy ! Component: 700 - total flux cleaned = 0.000432259 Jy ! Component: 750 - total flux cleaned = 0.000302456 Jy ! Component: 800 - total flux cleaned = 0.000277053 Jy ! Component: 850 - total flux cleaned = 0.000152801 Jy ! Component: 900 - total flux cleaned = 7.92902e-05 Jy ! Component: 950 - total flux cleaned = -1.69192e-05 Jy ! Component: 1000 - total flux cleaned = -6.36801e-05 Jy ! Component: 1050 - total flux cleaned = -0.000155878 Jy ! Component: 1100 - total flux cleaned = -0.000156009 Jy ! Component: 1150 - total flux cleaned = -0.000178493 Jy ! Component: 1200 - total flux cleaned = -0.000135187 Jy ! Component: 1250 - total flux cleaned = -0.000135503 Jy ! Component: 1300 - total flux cleaned = -0.000135366 Jy ! Component: 1350 - total flux cleaned = -0.000114558 Jy ! Component: 1400 - total flux cleaned = -7.31977e-05 Jy ! Component: 1450 - total flux cleaned = -3.25371e-05 Jy ! Component: 1500 - total flux cleaned = -3.23038e-05 Jy ! Component: 1550 - total flux cleaned = 7.13486e-06 Jy ! Component: 1600 - total flux cleaned = 8.43407e-05 Jy ! Component: 1650 - total flux cleaned = 6.49306e-05 Jy ! Component: 1700 - total flux cleaned = 0.000102639 Jy ! Component: 1750 - total flux cleaned = 6.54683e-05 Jy ! Component: 1800 - total flux cleaned = 6.56681e-05 Jy ! Component: 1850 - total flux cleaned = 8.34732e-05 Jy ! Component: 1900 - total flux cleaned = 2.98722e-05 Jy ! Component: 1950 - total flux cleaned = 4.75597e-05 Jy ! Component: 2000 - total flux cleaned = -2.23199e-05 Jy ! Component: 2050 - total flux cleaned = -5.67061e-05 Jy ! Component: 2100 - total flux cleaned = -5.68427e-05 Jy ! Component: 2150 - total flux cleaned = -4.01567e-05 Jy ! Component: 2200 - total flux cleaned = -4.03614e-05 Jy ! Component: 2250 - total flux cleaned = -4.04907e-05 Jy ! Component: 2300 - total flux cleaned = -7.93586e-06 Jy ! Component: 2350 - total flux cleaned = -7.28878e-05 Jy ! Component: 2400 - total flux cleaned = -5.68202e-05 Jy ! Component: 2450 - total flux cleaned = 6.98167e-06 Jy ! Component: 2500 - total flux cleaned = 6.76307e-06 Jy ! Component: 2550 - total flux cleaned = 6.77872e-06 Jy ! Component: 2600 - total flux cleaned = 2.23813e-05 Jy ! Component: 2650 - total flux cleaned = 9.96675e-05 Jy ! Component: 2700 - total flux cleaned = 0.000130095 Jy ! Component: 2750 - total flux cleaned = 0.000114759 Jy ! Component: 2800 - total flux cleaned = 0.000129823 Jy ! Component: 2850 - total flux cleaned = 0.000159522 Jy ! Component: 2900 - total flux cleaned = 0.000144555 Jy ! Component: 2950 - total flux cleaned = 0.000159244 Jy ! Component: 3000 - total flux cleaned = 0.000159064 Jy ! Component: 3050 - total flux cleaned = 0.000159 Jy ! Component: 3100 - total flux cleaned = 0.000129959 Jy ! Component: 3150 - total flux cleaned = 7.26073e-05 Jy ! Component: 3200 - total flux cleaned = 5.82925e-05 Jy ! Component: 3250 - total flux cleaned = 5.8116e-05 Jy ! Component: 3300 - total flux cleaned = 1.5732e-05 Jy ! Component: 3350 - total flux cleaned = -2.62788e-05 Jy ! Component: 3400 - total flux cleaned = -6.81655e-05 Jy ! Component: 3450 - total flux cleaned = -9.5995e-05 Jy ! Component: 3500 - total flux cleaned = -0.000165232 Jy ! Component: 3550 - total flux cleaned = -0.00022037 Jy ! Component: 3600 - total flux cleaned = -0.000247855 Jy ! Component: 3650 - total flux cleaned = -0.000288852 Jy ! Component: 3700 - total flux cleaned = -0.000316073 Jy ! Component: 3750 - total flux cleaned = -0.000383908 Jy ! Component: 3800 - total flux cleaned = -0.000410924 Jy ! Component: 3850 - total flux cleaned = -0.000464836 Jy ! Component: 3900 - total flux cleaned = -0.000491587 Jy ! Component: 3950 - total flux cleaned = -0.000558473 Jy ! Component: 4000 - total flux cleaned = -0.000598475 Jy ! Component: 4050 - total flux cleaned = -0.000678282 Jy ! Total flux subtracted in 4096 components = -0.000691567 Jy ! Clean residual min=-0.000887 max=0.000877 Jy/beam ! Clean residual mean=0.000001 rms=0.000217 Jy/beam ! Combined flux in latest and established models = 0.420723 Jy keep ! Adding 222 model components to the UV plane model. ! The established model now contains 273 components and 0.420722 Jy ![Exited script file: muppet] wmap "J2359+3850_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.755 x 5.648 at 15.32 degrees (North through East) ! Clean map min=-0.0018255 max=0.38175 Jy/beam ! Writing clean map to FITS file: J2359+3850_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.381754 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000212049 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.166638 0.166638 0.333276 0.666552 1.3331 2.66621 5.33242 10.6648 21.3297 42.6593 85.3187 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.381 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.755 x 5.648 at 15.32 degrees (North through East) ! Clean map min=-0.0018255 max=0.38175 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2359+3850_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:39:10 2017