! Started logfile: J2358+3922_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:39:02 2017 obs J2358+3922_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J2358+3922_S_2014_01_04_pus_uva.fits ! AN table 1: 76 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.5 visibilities/baseline/integration-bin. ! Found source: J2358+3922 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 5472 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2358+3922_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 190 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 190 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 190 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 190 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.709485Jy sigma=0.010948 ! Fit after self-cal, rms=0.667315Jy sigma=0.010494 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.244 mas, bmaj=4.964 mas, bpa=-1.462 degrees ! Estimated noise=1080.72 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.264624 Jy ! Component: 100 - total flux cleaned = 0.34333 Jy ! Total flux subtracted in 100 components = 0.34333 Jy ! Clean residual min=-0.019746 max=0.029201 Jy/beam ! Clean residual mean=0.000052 rms=0.005416 Jy/beam ! Combined flux in latest and established models = 0.34333 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.34333 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103000Jy sigma=0.001376 ! Fit after self-cal, rms=0.103042Jy sigma=0.001375 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.839 mas, bmaj=5.738 mas, bpa=0.04876 degrees ! Estimated noise=643.814 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0285 Jy ! Component: 100 - total flux cleaned = 0.0416331 Jy ! Component: 150 - total flux cleaned = 0.0493423 Jy ! Component: 200 - total flux cleaned = 0.05395 Jy ! Total flux subtracted in 200 components = 0.05395 Jy ! Clean residual min=-0.015359 max=0.019202 Jy/beam ! Clean residual mean=0.000015 rms=0.004451 Jy/beam ! Combined flux in latest and established models = 0.39728 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 16 components and 0.39728 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093338Jy sigma=0.001287 ! Fit after self-cal, rms=0.093262Jy sigma=0.001287 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00* KP 1.00* LA 1.00 ! MK 0.97 NL 1.20 OV 0.96 PT 0.97 ! SC 0.91 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.00* KP 1.00* LA 0.97 ! MK 0.93 NL 1.04 OV 1.00 PT 0.94 ! SC 0.95 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00* KP 1.00* LA 0.80 ! MK 0.99 NL 1.00 OV 0.92 PT 0.95 ! SC 0.95 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.20 FD 1.00* KP 1.00* LA 0.86 ! MK 1.06 NL 1.09 OV 0.99 PT 0.97 ! SC 0.90 ! ! ! Fit before self-cal, rms=0.093262Jy sigma=0.001287 ! Fit after self-cal, rms=0.081059Jy sigma=0.001090 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.784 mas, bmaj=5.76 mas, bpa=0.5195 degrees ! Estimated noise=640.314 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6, -5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0128541 Jy ! Component: 100 - total flux cleaned = 0.0162938 Jy ! Component: 150 - total flux cleaned = 0.0166877 Jy ! Component: 200 - total flux cleaned = 0.0170118 Jy ! Total flux subtracted in 200 components = 0.0170118 Jy ! Clean residual min=-0.007749 max=0.007457 Jy/beam ! Clean residual mean=-0.000010 rms=0.001971 Jy/beam ! Combined flux in latest and established models = 0.414292 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 33 components and 0.414292 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078562Jy sigma=0.001056 ! Fit after self-cal, rms=0.078017Jy sigma=0.001051 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078017Jy sigma=0.001051 ! Fit after self-cal, rms=0.079509Jy sigma=0.000980 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.771 mas, bmaj=5.754 mas, bpa=0.5656 degrees ! Estimated noise=640.926 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00460729 Jy ! Component: 100 - total flux cleaned = 0.00499321 Jy ! Component: 150 - total flux cleaned = 0.00498785 Jy ! Component: 200 - total flux cleaned = 0.00514721 Jy ! Total flux subtracted in 200 components = 0.00514721 Jy ! Clean residual min=-0.003453 max=0.003849 Jy/beam ! Clean residual mean=-0.000004 rms=0.000889 Jy/beam ! Combined flux in latest and established models = 0.419439 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 49 components and 0.419439 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079081Jy sigma=0.000975 ! Fit after self-cal, rms=0.079044Jy sigma=0.000974 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00101914 Jy ! Component: 100 - total flux cleaned = 0.00130425 Jy ! Component: 150 - total flux cleaned = 0.00149264 Jy ! Component: 200 - total flux cleaned = 0.00160093 Jy ! Total flux subtracted in 200 components = 0.00160093 Jy ! Clean residual min=-0.003297 max=0.003253 Jy/beam ! Clean residual mean=-0.000003 rms=0.000796 Jy/beam ! Combined flux in latest and established models = 0.42104 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 58 components and 0.42104 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078893Jy sigma=0.000972 ! Fit after self-cal, rms=0.078879Jy sigma=0.000972 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078879Jy sigma=0.000972 ! Fit after self-cal, rms=0.078463Jy sigma=0.000972 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.771 mas, bmaj=5.759 mas, bpa=0.7255 degrees ! Estimated noise=640.481 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00125254 Jy ! Component: 100 - total flux cleaned = 0.00114655 Jy ! Component: 150 - total flux cleaned = 0.0010542 Jy ! Component: 200 - total flux cleaned = 0.00110012 Jy ! Total flux subtracted in 200 components = 0.00110012 Jy ! Clean residual min=-0.002676 max=0.002795 Jy/beam ! Clean residual mean=0.000000 rms=0.000694 Jy/beam ! Combined flux in latest and established models = 0.42214 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 70 components and 0.42214 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078357Jy sigma=0.000971 ! Fit after self-cal, rms=0.078339Jy sigma=0.000970 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000419279 Jy ! Component: 100 - total flux cleaned = 0.000586406 Jy ! Component: 150 - total flux cleaned = 0.000586953 Jy ! Component: 200 - total flux cleaned = 0.000655007 Jy ! Total flux subtracted in 200 components = 0.000655007 Jy ! Clean residual min=-0.002495 max=0.002673 Jy/beam ! Clean residual mean=0.000001 rms=0.000666 Jy/beam ! Combined flux in latest and established models = 0.422795 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 75 components and 0.422795 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078281Jy sigma=0.000970 ! Fit after self-cal, rms=0.078279Jy sigma=0.000970 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078279Jy sigma=0.000970 ! Fit after self-cal, rms=0.078063Jy sigma=0.000970 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.784 mas, bmaj=9.709 mas, bpa=14.64 degrees ! Estimated noise=728.074 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000822101 Jy ! Component: 100 - total flux cleaned = 0.00103913 Jy ! Component: 150 - total flux cleaned = 0.0012144 Jy ! Component: 200 - total flux cleaned = 0.0013179 Jy ! Total flux subtracted in 200 components = 0.0013179 Jy ! Clean residual min=-0.003188 max=0.003173 Jy/beam ! Clean residual mean=0.000005 rms=0.000876 Jy/beam ! Combined flux in latest and established models = 0.424113 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 78 components and 0.424113 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078036Jy sigma=0.000969 ! Fit after self-cal, rms=0.078030Jy sigma=0.000969 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.88803e-05 Jy ! Component: 100 - total flux cleaned = 0.000201122 Jy ! Component: 150 - total flux cleaned = 0.000335387 Jy ! Component: 200 - total flux cleaned = 0.000450892 Jy ! Total flux subtracted in 200 components = 0.000450892 Jy ! Clean residual min=-0.003081 max=0.003095 Jy/beam ! Clean residual mean=0.000006 rms=0.000870 Jy/beam ! Combined flux in latest and established models = 0.424564 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 87 components and 0.424564 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078024Jy sigma=0.000969 ! Fit after self-cal, rms=0.078026Jy sigma=0.000969 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.771 mas, bmaj=5.762 mas, bpa=0.7605 degrees ! Estimated noise=640.297 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.771 x 5.762 at 0.7605 degrees (North through East) ! Clean map min=-0.0022175 max=0.32863 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.186 mas, bmaj=4.984 mas, bpa=-0.5267 degrees ! Estimated noise=1069.19 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.261888 Jy ! Component: 100 - total flux cleaned = 0.339859 Jy ! Component: 150 - total flux cleaned = 0.370823 Jy ! Component: 200 - total flux cleaned = 0.386943 Jy ! Total flux subtracted in 200 components = 0.386943 Jy ! Clean residual min=-0.006612 max=0.007903 Jy/beam ! Clean residual mean=0.000009 rms=0.001834 Jy/beam ! Combined flux in latest and established models = 0.386943 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.386943 Jy ! Inverting map and beam ! Estimated beam: bmin=3.771 mas, bmaj=5.762 mas, bpa=0.7605 degrees ! Estimated noise=640.297 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0104175 Jy ! Component: 100 - total flux cleaned = 0.0172755 Jy ! Component: 150 - total flux cleaned = 0.0220484 Jy ! Component: 200 - total flux cleaned = 0.0254417 Jy ! Total flux subtracted in 200 components = 0.0254417 Jy ! Clean residual min=-0.002867 max=0.003149 Jy/beam ! Clean residual mean=0.000004 rms=0.000808 Jy/beam ! Combined flux in latest and established models = 0.412385 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 59 components and 0.412385 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.784 mas, bmaj=9.709 mas, bpa=14.64 degrees ! Estimated noise=728.074 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0038383 Jy ! Component: 100 - total flux cleaned = 0.00614973 Jy ! Component: 150 - total flux cleaned = 0.00772995 Jy ! Component: 200 - total flux cleaned = 0.00885568 Jy ! Total flux subtracted in 200 components = 0.00885568 Jy ! Clean residual min=-0.003035 max=0.003295 Jy/beam ! Clean residual mean=0.000006 rms=0.000881 Jy/beam ! Combined flux in latest and established models = 0.421241 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000814398 Jy ! Component: 100 - total flux cleaned = 0.00140658 Jy ! Component: 150 - total flux cleaned = 0.00162655 Jy ! Component: 200 - total flux cleaned = 0.00178058 Jy ! Total flux subtracted in 200 components = 0.00178058 Jy ! Clean residual min=-0.003040 max=0.003167 Jy/beam ! Clean residual mean=0.000006 rms=0.000862 Jy/beam ! Combined flux in latest and established models = 0.423021 Jy ! Adding 58 model components to the UV plane model. ! The established model now contains 109 components and 0.423021 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.771 mas, bmaj=5.762 mas, bpa=0.7605 degrees ! Estimated noise=640.297 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00037508 Jy ! Component: 100 - total flux cleaned = -0.000531205 Jy ! Component: 150 - total flux cleaned = -0.000450086 Jy ! Component: 200 - total flux cleaned = -0.000486054 Jy ! Total flux subtracted in 200 components = -0.000486054 Jy ! Clean residual min=-0.002347 max=0.002362 Jy/beam ! Clean residual mean=0.000003 rms=0.000618 Jy/beam ! Combined flux in latest and established models = 0.422535 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 125 components and 0.422535 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077970Jy sigma=0.000969 ! Fit after self-cal, rms=0.077980Jy sigma=0.000969 wmodel J2358+3922_S_2014_01_04_pus_map.mod ! Writing 125 model components to file: J2358+3922_S_2014_01_04_pus_map.mod wobs J2358+3922_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J2358+3922_S_2014_01_04_pus_uvs.fits wwins J2358+3922_S_2014_01_04_pus_map.win ! wwins: Wrote 2 windows to J2358+3922_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000572385 Jy ! Component: 100 - total flux cleaned = 0.000495919 Jy ! Component: 150 - total flux cleaned = 0.000316349 Jy ! Component: 200 - total flux cleaned = 8.13473e-05 Jy ! Component: 250 - total flux cleaned = -0.000205955 Jy ! Component: 300 - total flux cleaned = -0.000296796 Jy ! Component: 350 - total flux cleaned = -0.000471097 Jy ! Component: 400 - total flux cleaned = -0.000693051 Jy ! Component: 450 - total flux cleaned = -0.000880092 Jy ! Component: 500 - total flux cleaned = -0.00103649 Jy ! Component: 550 - total flux cleaned = -0.00128782 Jy ! Component: 600 - total flux cleaned = -0.00148165 Jy ! Component: 650 - total flux cleaned = -0.00159965 Jy ! Component: 700 - total flux cleaned = -0.00171393 Jy ! Component: 750 - total flux cleaned = -0.00180285 Jy ! Component: 800 - total flux cleaned = -0.00188947 Jy ! Component: 850 - total flux cleaned = -0.0018896 Jy ! Component: 900 - total flux cleaned = -0.00193106 Jy ! Component: 950 - total flux cleaned = -0.00203172 Jy ! Component: 1000 - total flux cleaned = -0.00210997 Jy ! Component: 1050 - total flux cleaned = -0.00220583 Jy ! Component: 1100 - total flux cleaned = -0.00228072 Jy ! Component: 1150 - total flux cleaned = -0.00239054 Jy ! Component: 1200 - total flux cleaned = -0.00253308 Jy ! Component: 1250 - total flux cleaned = -0.00260329 Jy ! Component: 1300 - total flux cleaned = -0.00275786 Jy ! Component: 1350 - total flux cleaned = -0.00284189 Jy ! Component: 1400 - total flux cleaned = -0.00290793 Jy ! Component: 1450 - total flux cleaned = -0.00303784 Jy ! Component: 1500 - total flux cleaned = -0.00313326 Jy ! Component: 1550 - total flux cleaned = -0.00322705 Jy ! Component: 1600 - total flux cleaned = -0.00327337 Jy ! Component: 1650 - total flux cleaned = -0.00347053 Jy ! Component: 1700 - total flux cleaned = -0.00357509 Jy ! Component: 1750 - total flux cleaned = -0.00375172 Jy ! Component: 1800 - total flux cleaned = -0.00388197 Jy ! Component: 1850 - total flux cleaned = -0.00403908 Jy ! Component: 1900 - total flux cleaned = -0.00415161 Jy ! Component: 1950 - total flux cleaned = -0.00430431 Jy ! Component: 2000 - total flux cleaned = -0.00445498 Jy ! Component: 2050 - total flux cleaned = -0.00457656 Jy ! Component: 2100 - total flux cleaned = -0.00465655 Jy ! Component: 2150 - total flux cleaned = -0.00476186 Jy ! Component: 2200 - total flux cleaned = -0.00486586 Jy ! Component: 2250 - total flux cleaned = -0.00495568 Jy ! Component: 2300 - total flux cleaned = -0.00501925 Jy ! Component: 2350 - total flux cleaned = -0.00513231 Jy ! Component: 2400 - total flux cleaned = -0.00521924 Jy ! Component: 2450 - total flux cleaned = -0.00526853 Jy ! Component: 2500 - total flux cleaned = -0.00537799 Jy ! Component: 2550 - total flux cleaned = -0.00547428 Jy ! Component: 2600 - total flux cleaned = -0.00553399 Jy ! Component: 2650 - total flux cleaned = -0.00564034 Jy ! Component: 2700 - total flux cleaned = -0.00574555 Jy ! Component: 2750 - total flux cleaned = -0.00582661 Jy ! Component: 2800 - total flux cleaned = -0.00589543 Jy ! Component: 2850 - total flux cleaned = -0.00597511 Jy ! Component: 2900 - total flux cleaned = -0.00605415 Jy ! Component: 2950 - total flux cleaned = -0.006099 Jy ! Component: 3000 - total flux cleaned = -0.00613243 Jy ! Component: 3050 - total flux cleaned = -0.00620972 Jy ! Component: 3100 - total flux cleaned = -0.00628638 Jy ! Component: 3150 - total flux cleaned = -0.00636249 Jy ! Component: 3200 - total flux cleaned = -0.00640577 Jy ! Component: 3250 - total flux cleaned = -0.00647013 Jy ! Component: 3300 - total flux cleaned = -0.00650214 Jy ! Component: 3350 - total flux cleaned = -0.00656585 Jy ! Component: 3400 - total flux cleaned = -0.00659754 Jy ! Component: 3450 - total flux cleaned = -0.006629 Jy ! Component: 3500 - total flux cleaned = -0.00663942 Jy ! Component: 3550 - total flux cleaned = -0.006681 Jy ! Component: 3600 - total flux cleaned = -0.00673272 Jy ! Component: 3650 - total flux cleaned = -0.00676363 Jy ! Component: 3700 - total flux cleaned = -0.0067944 Jy ! Component: 3750 - total flux cleaned = -0.00683529 Jy ! Component: 3800 - total flux cleaned = -0.00687608 Jy ! Component: 3850 - total flux cleaned = -0.00687609 Jy ! Component: 3900 - total flux cleaned = -0.00693692 Jy ! Component: 3950 - total flux cleaned = -0.00697731 Jy ! Component: 4000 - total flux cleaned = -0.00699748 Jy ! Component: 4050 - total flux cleaned = -0.00704773 Jy ! Total flux subtracted in 4096 components = -0.0070578 Jy ! Clean residual min=-0.000552 max=0.000692 Jy/beam ! Clean residual mean=0.000001 rms=0.000166 Jy/beam ! Combined flux in latest and established models = 0.415477 Jy keep ! Adding 245 model components to the UV plane model. ! The established model now contains 370 components and 0.415477 Jy ![Exited script file: muppet] wmap "J2358+3922_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.771 x 5.762 at 0.7605 degrees (North through East) ! Clean map min=-0.0012843 max=0.33062 Jy/beam ! Writing clean map to FITS file: J2358+3922_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.330619 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000161944 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.146946 0.146946 0.293892 0.587785 1.17557 2.35114 4.70228 9.40456 18.8091 37.6182 75.2364 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.33 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.771 x 5.762 at 0.7605 degrees (North through East) ! Clean map min=-0.0012843 max=0.33062 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2358+3922_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:39:06 2017