! Started logfile: J2353-2743_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:38:44 2017 obs J2353-2743_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J2353-2743_S_2014_01_04_pus_uva.fits ! AN table 1: 108 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.583333 visibilities/baseline/integration-bin. ! Found source: J2353-2743 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 9072 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2353-2743_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 216 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 216 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 216 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 216 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.005383Jy sigma=0.011120 ! Fit after self-cal, rms=0.947727Jy sigma=0.010492 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.338 mas, bmaj=5.543 mas, bpa=1.341 degrees ! Estimated noise=1235.09 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0450576 Jy ! Component: 100 - total flux cleaned = 0.0559677 Jy ! Total flux subtracted in 100 components = 0.0559677 Jy ! Clean residual min=-0.006029 max=0.005065 Jy/beam ! Clean residual mean=0.000006 rms=0.001291 Jy/beam ! Combined flux in latest and established models = 0.0559677 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0559677 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088046Jy sigma=0.000855 ! Fit after self-cal, rms=0.086982Jy sigma=0.000847 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.935 mas, bmaj=6.744 mas, bpa=0.2264 degrees ! Estimated noise=701.784 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0041332 Jy ! Component: 100 - total flux cleaned = 0.00422222 Jy ! Component: 150 - total flux cleaned = 0.00422219 Jy ! Component: 200 - total flux cleaned = 0.0042751 Jy ! Total flux subtracted in 200 components = 0.0042751 Jy ! Clean residual min=-0.005385 max=0.003556 Jy/beam ! Clean residual mean=0.000018 rms=0.000967 Jy/beam ! Combined flux in latest and established models = 0.0602428 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 17 components and 0.0602428 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086823Jy sigma=0.000843 ! Fit after self-cal, rms=0.086805Jy sigma=0.000843 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.80 FD 1.00* KP 1.00* LA 1.00 ! MK 0.98 NL 1.04 OV 1.11 PT 1.11 ! SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.82 FD 1.00* KP 1.00* LA 1.08 ! MK 1.00 NL 1.14 OV 1.11 PT 1.05 ! SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 1.00* KP 1.00* LA 0.95 ! MK 1.08 NL 1.06 OV 0.99 PT 1.12 ! SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 1.00* KP 1.00* LA 0.92 ! MK 0.97 NL 1.17 OV 1.16 PT 1.19 ! SC 0.94 ! ! ! Fit before self-cal, rms=0.086805Jy sigma=0.000843 ! Fit after self-cal, rms=0.089000Jy sigma=0.000838 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.917 mas, bmaj=6.621 mas, bpa=1.201 degrees ! Estimated noise=698.538 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00115011 Jy ! Component: 100 - total flux cleaned = 0.00120134 Jy ! Component: 150 - total flux cleaned = 0.00127131 Jy ! Component: 200 - total flux cleaned = 0.00131457 Jy ! Total flux subtracted in 200 components = 0.00131457 Jy ! Clean residual min=-0.002686 max=0.002438 Jy/beam ! Clean residual mean=0.000001 rms=0.000660 Jy/beam ! Combined flux in latest and established models = 0.0615574 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 27 components and 0.0615574 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088973Jy sigma=0.000838 ! Fit after self-cal, rms=0.090393Jy sigma=0.000836 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090393Jy sigma=0.000836 ! Fit after self-cal, rms=0.096799Jy sigma=0.000832 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.919 mas, bmaj=6.543 mas, bpa=1.55 degrees ! Estimated noise=716.656 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00116632 Jy ! Component: 100 - total flux cleaned = 0.00159802 Jy ! Component: 150 - total flux cleaned = 0.00167627 Jy ! Component: 200 - total flux cleaned = 0.00169393 Jy ! Total flux subtracted in 200 components = 0.00169393 Jy ! Clean residual min=-0.002822 max=0.002567 Jy/beam ! Clean residual mean=-0.000001 rms=0.000634 Jy/beam ! Combined flux in latest and established models = 0.0632513 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 41 components and 0.0632513 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096772Jy sigma=0.000832 ! Fit after self-cal, rms=0.097828Jy sigma=0.000831 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000480436 Jy ! Component: 100 - total flux cleaned = -0.000481503 Jy ! Component: 150 - total flux cleaned = -0.00043499 Jy ! Component: 200 - total flux cleaned = -0.000392471 Jy ! Total flux subtracted in 200 components = -0.000392471 Jy ! Clean residual min=-0.003143 max=0.002604 Jy/beam ! Clean residual mean=0.000005 rms=0.000651 Jy/beam ! Combined flux in latest and established models = 0.0628588 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 49 components and 0.0628588 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097802Jy sigma=0.000831 ! Fit after self-cal, rms=0.097859Jy sigma=0.000831 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097859Jy sigma=0.000831 ! Fit after self-cal, rms=0.101579Jy sigma=0.000831 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.906 mas, bmaj=6.482 mas, bpa=1.703 degrees ! Estimated noise=720.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00101801 Jy ! Component: 100 - total flux cleaned = 0.00119663 Jy ! Component: 150 - total flux cleaned = 0.00123428 Jy ! Component: 200 - total flux cleaned = 0.00127041 Jy ! Total flux subtracted in 200 components = 0.00127041 Jy ! Clean residual min=-0.002740 max=0.002757 Jy/beam ! Clean residual mean=-0.000001 rms=0.000635 Jy/beam ! Combined flux in latest and established models = 0.0641292 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 52 components and 0.0641292 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101553Jy sigma=0.000831 ! Fit after self-cal, rms=0.102268Jy sigma=0.000830 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00031183 Jy ! Component: 100 - total flux cleaned = -0.000238126 Jy ! Component: 150 - total flux cleaned = -0.000217395 Jy ! Component: 200 - total flux cleaned = -0.000217042 Jy ! Total flux subtracted in 200 components = -0.000217042 Jy ! Clean residual min=-0.003013 max=0.002495 Jy/beam ! Clean residual mean=0.000002 rms=0.000622 Jy/beam ! Combined flux in latest and established models = 0.0639122 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 52 components and 0.0639122 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102247Jy sigma=0.000830 ! Fit after self-cal, rms=0.102307Jy sigma=0.000830 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102307Jy sigma=0.000830 ! Fit after self-cal, rms=0.105042Jy sigma=0.000830 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.558 mas, bmaj=18.03 mas, bpa=7.033 degrees ! Estimated noise=923.453 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000955939 Jy ! Component: 100 - total flux cleaned = 0.00104988 Jy ! Component: 150 - total flux cleaned = 0.00105063 Jy ! Component: 200 - total flux cleaned = 0.001065 Jy ! Total flux subtracted in 200 components = 0.001065 Jy ! Clean residual min=-0.003203 max=0.002901 Jy/beam ! Clean residual mean=-0.000005 rms=0.000924 Jy/beam ! Combined flux in latest and established models = 0.0649772 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 55 components and 0.0649772 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105026Jy sigma=0.000830 ! Fit after self-cal, rms=0.105509Jy sigma=0.000830 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000356854 Jy ! Component: 100 - total flux cleaned = -0.000366041 Jy ! Component: 150 - total flux cleaned = -0.000373386 Jy ! Component: 200 - total flux cleaned = -0.000380238 Jy ! Total flux subtracted in 200 components = -0.000380238 Jy ! Clean residual min=-0.003241 max=0.002613 Jy/beam ! Clean residual mean=-0.000001 rms=0.000883 Jy/beam ! Combined flux in latest and established models = 0.0645969 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 57 components and 0.0645969 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105511Jy sigma=0.000830 ! Fit after self-cal, rms=0.105515Jy sigma=0.000830 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.887 mas, bmaj=6.427 mas, bpa=1.836 degrees ! Estimated noise=723.802 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.887 x 6.427 at 1.836 degrees (North through East) ! Clean map min=-0.0028962 max=0.056423 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.308 mas, bmaj=5.347 mas, bpa=3.117 degrees ! Estimated noise=1234.47 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0431424 Jy ! Component: 100 - total flux cleaned = 0.0545181 Jy ! Component: 150 - total flux cleaned = 0.0595529 Jy ! Component: 200 - total flux cleaned = 0.0625827 Jy ! Total flux subtracted in 200 components = 0.0625827 Jy ! Clean residual min=-0.003945 max=0.003479 Jy/beam ! Clean residual mean=-0.000008 rms=0.000879 Jy/beam ! Combined flux in latest and established models = 0.0625827 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.0625827 Jy ! Inverting map and beam ! Estimated beam: bmin=2.887 mas, bmaj=6.427 mas, bpa=1.836 degrees ! Estimated noise=723.802 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00142252 Jy ! Component: 100 - total flux cleaned = 0.00168287 Jy ! Component: 150 - total flux cleaned = 0.0019142 Jy ! Component: 200 - total flux cleaned = 0.00204293 Jy ! Total flux subtracted in 200 components = 0.00204293 Jy ! Clean residual min=-0.003085 max=0.002415 Jy/beam ! Clean residual mean=0.000000 rms=0.000642 Jy/beam ! Combined flux in latest and established models = 0.0646257 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 22 components and 0.0646257 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.558 mas, bmaj=18.03 mas, bpa=7.033 degrees ! Estimated noise=923.453 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.24566e-06 Jy ! Component: 100 - total flux cleaned = -8.8478e-06 Jy ! Component: 150 - total flux cleaned = -1.01061e-05 Jy ! Component: 200 - total flux cleaned = -1.06758e-05 Jy ! Total flux subtracted in 200 components = -1.06758e-05 Jy ! Clean residual min=-0.003310 max=0.002624 Jy/beam ! Clean residual mean=0.000000 rms=0.000884 Jy/beam ! Combined flux in latest and established models = 0.064615 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.18563e-05 Jy ! Component: 100 - total flux cleaned = -2.30671e-05 Jy ! Component: 150 - total flux cleaned = -2.85767e-05 Jy ! Component: 200 - total flux cleaned = -3.89603e-05 Jy ! Total flux subtracted in 200 components = -3.89603e-05 Jy ! Clean residual min=-0.003301 max=0.002625 Jy/beam ! Clean residual mean=-0.000000 rms=0.000883 Jy/beam ! Combined flux in latest and established models = 0.064576 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 30 components and 0.064576 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.887 mas, bmaj=6.427 mas, bpa=1.836 degrees ! Estimated noise=723.802 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000176395 Jy ! Component: 100 - total flux cleaned = 6.81885e-05 Jy ! Component: 150 - total flux cleaned = 4.63907e-05 Jy ! Component: 200 - total flux cleaned = 6.64574e-05 Jy ! Total flux subtracted in 200 components = 6.64574e-05 Jy ! Clean residual min=-0.003053 max=0.002396 Jy/beam ! Clean residual mean=0.000000 rms=0.000636 Jy/beam ! Combined flux in latest and established models = 0.0646425 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 39 components and 0.0646425 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105502Jy sigma=0.000830 ! Fit after self-cal, rms=0.105549Jy sigma=0.000830 wmodel J2353-2743_S_2014_01_04_pus_map.mod ! Writing 39 model components to file: J2353-2743_S_2014_01_04_pus_map.mod wobs J2353-2743_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J2353-2743_S_2014_01_04_pus_uvs.fits wwins J2353-2743_S_2014_01_04_pus_map.win ! wwins: Wrote 1 windows to J2353-2743_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00118177 Jy ! Component: 100 - total flux cleaned = -0.00127405 Jy ! Component: 150 - total flux cleaned = -0.00135007 Jy ! Component: 200 - total flux cleaned = -0.00161088 Jy ! Component: 250 - total flux cleaned = -0.00185751 Jy ! Component: 300 - total flux cleaned = -0.00195702 Jy ! Component: 350 - total flux cleaned = -0.00189257 Jy ! Component: 400 - total flux cleaned = -0.00180004 Jy ! Component: 450 - total flux cleaned = -0.00179989 Jy ! Component: 500 - total flux cleaned = -0.00177164 Jy ! Component: 550 - total flux cleaned = -0.001661 Jy ! Component: 600 - total flux cleaned = -0.00166079 Jy ! Component: 650 - total flux cleaned = -0.00144829 Jy ! Component: 700 - total flux cleaned = -0.00131954 Jy ! Component: 750 - total flux cleaned = -0.00129391 Jy ! Component: 800 - total flux cleaned = -0.00119436 Jy ! Component: 850 - total flux cleaned = -0.0011457 Jy ! Component: 900 - total flux cleaned = -0.00107355 Jy ! Component: 950 - total flux cleaned = -0.00104989 Jy ! Component: 1000 - total flux cleaned = -0.00104915 Jy ! Component: 1050 - total flux cleaned = -0.00102632 Jy ! Component: 1100 - total flux cleaned = -0.000959076 Jy ! Component: 1150 - total flux cleaned = -0.000981139 Jy ! Component: 1200 - total flux cleaned = -0.00100248 Jy ! Component: 1250 - total flux cleaned = -0.00100219 Jy ! Component: 1300 - total flux cleaned = -0.000939212 Jy ! Component: 1350 - total flux cleaned = -0.000897872 Jy ! Component: 1400 - total flux cleaned = -0.000898131 Jy ! Component: 1450 - total flux cleaned = -0.000837513 Jy ! Component: 1500 - total flux cleaned = -0.000817623 Jy ! Component: 1550 - total flux cleaned = -0.000817541 Jy ! Component: 1600 - total flux cleaned = -0.000778592 Jy ! Component: 1650 - total flux cleaned = -0.000778645 Jy ! Component: 1700 - total flux cleaned = -0.000778286 Jy ! Component: 1750 - total flux cleaned = -0.000759242 Jy ! Component: 1800 - total flux cleaned = -0.000759437 Jy ! Component: 1850 - total flux cleaned = -0.000741169 Jy ! Component: 1900 - total flux cleaned = -0.000777423 Jy ! Component: 1950 - total flux cleaned = -0.000742007 Jy ! Component: 2000 - total flux cleaned = -0.000742182 Jy ! Component: 2050 - total flux cleaned = -0.000759698 Jy ! Component: 2100 - total flux cleaned = -0.000742306 Jy ! Component: 2150 - total flux cleaned = -0.000759555 Jy ! Component: 2200 - total flux cleaned = -0.000759644 Jy ! Component: 2250 - total flux cleaned = -0.000726074 Jy ! Component: 2300 - total flux cleaned = -0.000742573 Jy ! Component: 2350 - total flux cleaned = -0.000742338 Jy ! Component: 2400 - total flux cleaned = -0.000758522 Jy ! Component: 2450 - total flux cleaned = -0.000758717 Jy ! Component: 2500 - total flux cleaned = -0.000838566 Jy ! Component: 2550 - total flux cleaned = -0.00085418 Jy ! Component: 2600 - total flux cleaned = -0.000822873 Jy ! Component: 2650 - total flux cleaned = -0.00080719 Jy ! Component: 2700 - total flux cleaned = -0.000838174 Jy ! Component: 2750 - total flux cleaned = -0.00083818 Jy ! Component: 2800 - total flux cleaned = -0.00089923 Jy ! Component: 2850 - total flux cleaned = -0.000929291 Jy ! Component: 2900 - total flux cleaned = -0.000929208 Jy ! Component: 2950 - total flux cleaned = -0.000973786 Jy ! Component: 3000 - total flux cleaned = -0.000988526 Jy ! Component: 3050 - total flux cleaned = -0.000988765 Jy ! Component: 3100 - total flux cleaned = -0.000988937 Jy ! Component: 3150 - total flux cleaned = -0.00101804 Jy ! Component: 3200 - total flux cleaned = -0.00106114 Jy ! Component: 3250 - total flux cleaned = -0.00107533 Jy ! Component: 3300 - total flux cleaned = -0.00108941 Jy ! Component: 3350 - total flux cleaned = -0.0010894 Jy ! Component: 3400 - total flux cleaned = -0.00104742 Jy ! Component: 3450 - total flux cleaned = -0.00107543 Jy ! Component: 3500 - total flux cleaned = -0.00110328 Jy ! Component: 3550 - total flux cleaned = -0.00117213 Jy ! Component: 3600 - total flux cleaned = -0.00113099 Jy ! Component: 3650 - total flux cleaned = -0.00114455 Jy ! Component: 3700 - total flux cleaned = -0.0011038 Jy ! Component: 3750 - total flux cleaned = -0.00109031 Jy ! Component: 3800 - total flux cleaned = -0.0011308 Jy ! Component: 3850 - total flux cleaned = -0.00111725 Jy ! Component: 3900 - total flux cleaned = -0.00113061 Jy ! Component: 3950 - total flux cleaned = -0.0010505 Jy ! Component: 4000 - total flux cleaned = -0.00102399 Jy ! Component: 4050 - total flux cleaned = -0.00105048 Jy ! Total flux subtracted in 4096 components = -0.00102393 Jy ! Clean residual min=-0.000884 max=0.000766 Jy/beam ! Clean residual mean=0.000003 rms=0.000224 Jy/beam ! Combined flux in latest and established models = 0.0636186 Jy keep ! Adding 242 model components to the UV plane model. ! The established model now contains 281 components and 0.0636186 Jy ![Exited script file: muppet] wmap "J2353-2743_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.887 x 6.427 at 1.836 degrees (North through East) ! Clean map min=-0.001651 max=0.055666 Jy/beam ! Writing clean map to FITS file: J2353-2743_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0556661 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000221675 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.19467 1.19467 2.38933 4.77866 9.55733 19.1147 38.2293 76.4586 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.055 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.887 x 6.427 at 1.836 degrees (North through East) ! Clean map min=-0.001651 max=0.055666 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2353-2743_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:38:48 2017