! Started logfile: J2352+3947_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:38:39 2017 obs J2352+3947_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J2352+3947_S_2014_01_04_pus_uva.fits ! AN table 1: 76 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.5 visibilities/baseline/integration-bin. ! Found source: J2352+3947 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 5472 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2352+3947_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 190 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 190 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 190 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 190 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.867590Jy sigma=0.013573 ! Fit after self-cal, rms=0.854987Jy sigma=0.013409 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.086 mas, bmaj=4.663 mas, bpa=3.007 degrees ! Estimated noise=1190.72 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.110125 Jy ! Component: 100 - total flux cleaned = 0.136208 Jy ! Total flux subtracted in 100 components = 0.136208 Jy ! Clean residual min=-0.007462 max=0.010997 Jy/beam ! Clean residual mean=0.000020 rms=0.002177 Jy/beam ! Combined flux in latest and established models = 0.136208 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.136208 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074604Jy sigma=0.000985 ! Fit after self-cal, rms=0.074604Jy sigma=0.000984 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.856 mas, bmaj=5.724 mas, bpa=-0.4265 degrees ! Estimated noise=650.463 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0151866 Jy ! Component: 100 - total flux cleaned = 0.0220719 Jy ! Component: 150 - total flux cleaned = 0.0262446 Jy ! Component: 200 - total flux cleaned = 0.0290084 Jy ! Total flux subtracted in 200 components = 0.0290084 Jy ! Clean residual min=-0.005413 max=0.006567 Jy/beam ! Clean residual mean=0.000005 rms=0.001483 Jy/beam ! Combined flux in latest and established models = 0.165217 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 32 components and 0.165217 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071257Jy sigma=0.000944 ! Fit after self-cal, rms=0.071207Jy sigma=0.000944 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00* KP 1.00* LA 1.01 ! MK 1.08 NL 1.00 OV 0.95 PT 0.99 ! SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.00* KP 1.00* LA 0.96 ! MK 1.01 NL 1.03 OV 1.00 PT 0.99 ! SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* KP 1.00* LA 0.81 ! MK 1.08 NL 1.01 OV 0.93 PT 0.94 ! SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.21 FD 1.00* KP 1.00* LA 0.85 ! MK 1.03 NL 1.08 OV 0.99 PT 0.99 ! SC 0.90 ! ! ! Fit before self-cal, rms=0.071207Jy sigma=0.000944 ! Fit after self-cal, rms=0.067804Jy sigma=0.000904 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.87 mas, bmaj=5.811 mas, bpa=0.5332 degrees ! Estimated noise=652.227 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-19, 11). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00209321 Jy ! Component: 100 - total flux cleaned = 0.00193694 Jy ! Component: 150 - total flux cleaned = 0.0012307 Jy ! Component: 200 - total flux cleaned = 0.000517181 Jy ! Total flux subtracted in 200 components = 0.000517181 Jy ! Clean residual min=-0.002478 max=0.002631 Jy/beam ! Clean residual mean=-0.000004 rms=0.000663 Jy/beam ! Combined flux in latest and established models = 0.165734 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 47 components and 0.165734 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067485Jy sigma=0.000900 ! Fit after self-cal, rms=0.067179Jy sigma=0.000899 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067179Jy sigma=0.000899 ! Fit after self-cal, rms=0.066894Jy sigma=0.000896 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.867 mas, bmaj=5.808 mas, bpa=0.5274 degrees ! Estimated noise=652.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000104714 Jy ! Component: 100 - total flux cleaned = -5.32354e-05 Jy ! Component: 150 - total flux cleaned = 2.9956e-05 Jy ! Component: 200 - total flux cleaned = 0.000139536 Jy ! Total flux subtracted in 200 components = 0.000139536 Jy ! Clean residual min=-0.002353 max=0.002461 Jy/beam ! Clean residual mean=-0.000000 rms=0.000521 Jy/beam ! Combined flux in latest and established models = 0.165873 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 57 components and 0.165873 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066815Jy sigma=0.000895 ! Fit after self-cal, rms=0.066784Jy sigma=0.000895 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (49, -7.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00154769 Jy ! Component: 100 - total flux cleaned = 0.00122585 Jy ! Component: 150 - total flux cleaned = 0.00110622 Jy ! Component: 200 - total flux cleaned = 0.000996181 Jy ! Total flux subtracted in 200 components = 0.000996181 Jy ! Clean residual min=-0.001874 max=0.001876 Jy/beam ! Clean residual mean=0.000000 rms=0.000455 Jy/beam ! Combined flux in latest and established models = 0.166869 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 68 components and 0.166869 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066686Jy sigma=0.000894 ! Fit after self-cal, rms=0.066680Jy sigma=0.000894 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066680Jy sigma=0.000894 ! Fit after self-cal, rms=0.066579Jy sigma=0.000893 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.866 mas, bmaj=5.8 mas, bpa=0.5153 degrees ! Estimated noise=651.216 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000373786 Jy ! Component: 100 - total flux cleaned = 0.00010915 Jy ! Component: 150 - total flux cleaned = 1.7678e-05 Jy ! Component: 200 - total flux cleaned = -1.176e-05 Jy ! Total flux subtracted in 200 components = -1.176e-05 Jy ! Clean residual min=-0.001777 max=0.001763 Jy/beam ! Clean residual mean=-0.000000 rms=0.000422 Jy/beam ! Combined flux in latest and established models = 0.166858 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 80 components and 0.166858 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066540Jy sigma=0.000893 ! Fit after self-cal, rms=0.066533Jy sigma=0.000893 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.40633e-05 Jy ! Component: 100 - total flux cleaned = 3.69593e-05 Jy ! Component: 150 - total flux cleaned = 3.66266e-05 Jy ! Component: 200 - total flux cleaned = 5.96783e-05 Jy ! Total flux subtracted in 200 components = 5.96783e-05 Jy ! Clean residual min=-0.001694 max=0.001717 Jy/beam ! Clean residual mean=0.000000 rms=0.000410 Jy/beam ! Combined flux in latest and established models = 0.166917 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 89 components and 0.166917 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066510Jy sigma=0.000893 ! Fit after self-cal, rms=0.066509Jy sigma=0.000893 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066509Jy sigma=0.000893 ! Fit after self-cal, rms=0.066504Jy sigma=0.000893 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.858 mas, bmaj=9.639 mas, bpa=14 degrees ! Estimated noise=726.352 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000356616 Jy ! Component: 100 - total flux cleaned = -0.000336179 Jy ! Component: 150 - total flux cleaned = -0.000352292 Jy ! Component: 200 - total flux cleaned = -0.0003522 Jy ! Total flux subtracted in 200 components = -0.0003522 Jy ! Clean residual min=-0.001845 max=0.001482 Jy/beam ! Clean residual mean=0.000000 rms=0.000435 Jy/beam ! Combined flux in latest and established models = 0.166565 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 110 components and 0.166565 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066497Jy sigma=0.000893 ! Fit after self-cal, rms=0.066491Jy sigma=0.000893 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.63067e-05 Jy ! Component: 100 - total flux cleaned = -0.000133681 Jy ! Component: 150 - total flux cleaned = -0.000159119 Jy ! Component: 200 - total flux cleaned = -0.000183536 Jy ! Total flux subtracted in 200 components = -0.000183536 Jy ! Clean residual min=-0.001817 max=0.001455 Jy/beam ! Clean residual mean=0.000001 rms=0.000428 Jy/beam ! Combined flux in latest and established models = 0.166382 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 119 components and 0.166382 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066487Jy sigma=0.000893 ! Fit after self-cal, rms=0.066487Jy sigma=0.000893 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.866 mas, bmaj=5.798 mas, bpa=0.5043 degrees ! Estimated noise=651.037 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.866 x 5.798 at 0.5043 degrees (North through East) ! Clean map min=-0.0023197 max=0.14331 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.073 mas, bmaj=4.706 mas, bpa=4.046 degrees ! Estimated noise=1194.16 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.110436 Jy ! Component: 100 - total flux cleaned = 0.136659 Jy ! Component: 150 - total flux cleaned = 0.148045 Jy ! Component: 200 - total flux cleaned = 0.153956 Jy ! Total flux subtracted in 200 components = 0.153956 Jy ! Clean residual min=-0.004398 max=0.005846 Jy/beam ! Clean residual mean=0.000005 rms=0.001142 Jy/beam ! Combined flux in latest and established models = 0.153956 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.153956 Jy ! Inverting map and beam ! Estimated beam: bmin=3.866 mas, bmaj=5.798 mas, bpa=0.5043 degrees ! Estimated noise=651.037 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.5, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00589915 Jy ! Component: 100 - total flux cleaned = 0.0093205 Jy ! Component: 150 - total flux cleaned = 0.0115432 Jy ! Component: 200 - total flux cleaned = 0.012563 Jy ! Total flux subtracted in 200 components = 0.012563 Jy ! Clean residual min=-0.002335 max=0.002061 Jy/beam ! Clean residual mean=0.000002 rms=0.000513 Jy/beam ! Combined flux in latest and established models = 0.166519 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 44 components and 0.166519 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.858 mas, bmaj=9.639 mas, bpa=14 degrees ! Estimated noise=726.352 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000184723 Jy ! Component: 100 - total flux cleaned = 5.21308e-05 Jy ! Component: 150 - total flux cleaned = 8.30716e-05 Jy ! Component: 200 - total flux cleaned = 0.000139256 Jy ! Total flux subtracted in 200 components = 0.000139256 Jy ! Clean residual min=-0.001928 max=0.001521 Jy/beam ! Clean residual mean=0.000001 rms=0.000458 Jy/beam ! Combined flux in latest and established models = 0.166658 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.20818e-05 Jy ! Component: 100 - total flux cleaned = 9.24562e-05 Jy ! Component: 150 - total flux cleaned = 0.000111073 Jy ! Component: 200 - total flux cleaned = 0.000111053 Jy ! Total flux subtracted in 200 components = 0.000111053 Jy ! Clean residual min=-0.001844 max=0.001519 Jy/beam ! Clean residual mean=0.000001 rms=0.000436 Jy/beam ! Combined flux in latest and established models = 0.166769 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 91 components and 0.166769 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.866 mas, bmaj=5.798 mas, bpa=0.5043 degrees ! Estimated noise=651.037 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.09641e-05 Jy ! Component: 100 - total flux cleaned = 0.000207955 Jy ! Component: 150 - total flux cleaned = 0.000212201 Jy ! Component: 200 - total flux cleaned = 0.000174368 Jy ! Total flux subtracted in 200 components = 0.000174368 Jy ! Clean residual min=-0.001866 max=0.001810 Jy/beam ! Clean residual mean=0.000000 rms=0.000414 Jy/beam ! Combined flux in latest and established models = 0.166944 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 105 components and 0.166943 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066525Jy sigma=0.000893 ! Fit after self-cal, rms=0.066522Jy sigma=0.000893 wmodel J2352+3947_S_2014_01_04_pus_map.mod ! Writing 105 model components to file: J2352+3947_S_2014_01_04_pus_map.mod wobs J2352+3947_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J2352+3947_S_2014_01_04_pus_uvs.fits wwins J2352+3947_S_2014_01_04_pus_map.win ! wwins: Wrote 4 windows to J2352+3947_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000171187 Jy ! Component: 100 - total flux cleaned = -6.10038e-05 Jy ! Component: 150 - total flux cleaned = 1.69788e-05 Jy ! Component: 200 - total flux cleaned = 0.000116277 Jy ! Component: 250 - total flux cleaned = 0.000259217 Jy ! Component: 300 - total flux cleaned = 0.000373902 Jy ! Component: 350 - total flux cleaned = 0.000440298 Jy ! Component: 400 - total flux cleaned = 0.000461625 Jy ! Component: 450 - total flux cleaned = 0.000461419 Jy ! Component: 500 - total flux cleaned = 0.000503029 Jy ! Component: 550 - total flux cleaned = 0.00052326 Jy ! Component: 600 - total flux cleaned = 0.000562449 Jy ! Component: 650 - total flux cleaned = 0.000600226 Jy ! Component: 700 - total flux cleaned = 0.000655564 Jy ! Component: 750 - total flux cleaned = 0.000655965 Jy ! Component: 800 - total flux cleaned = 0.000674143 Jy ! Component: 850 - total flux cleaned = 0.00067418 Jy ! Component: 900 - total flux cleaned = 0.000708399 Jy ! Component: 950 - total flux cleaned = 0.000758277 Jy ! Component: 1000 - total flux cleaned = 0.000742032 Jy ! Component: 1050 - total flux cleaned = 0.000758179 Jy ! Component: 1100 - total flux cleaned = 0.000758103 Jy ! Component: 1150 - total flux cleaned = 0.000758326 Jy ! Component: 1200 - total flux cleaned = 0.000727724 Jy ! Component: 1250 - total flux cleaned = 0.000682863 Jy ! Component: 1300 - total flux cleaned = 0.000682817 Jy ! Component: 1350 - total flux cleaned = 0.000624729 Jy ! Component: 1400 - total flux cleaned = 0.00055337 Jy ! Component: 1450 - total flux cleaned = 0.000497269 Jy ! Component: 1500 - total flux cleaned = 0.000483305 Jy ! Component: 1550 - total flux cleaned = 0.000442217 Jy ! Component: 1600 - total flux cleaned = 0.000401901 Jy ! Component: 1650 - total flux cleaned = 0.000348423 Jy ! Component: 1700 - total flux cleaned = 0.000308853 Jy ! Component: 1750 - total flux cleaned = 0.000282749 Jy ! Component: 1800 - total flux cleaned = 0.000231549 Jy ! Component: 1850 - total flux cleaned = 0.000218692 Jy ! Component: 1900 - total flux cleaned = 0.000181061 Jy ! Component: 1950 - total flux cleaned = 0.000156364 Jy ! Component: 2000 - total flux cleaned = 0.000144122 Jy ! Component: 2050 - total flux cleaned = 0.00011985 Jy ! Component: 2100 - total flux cleaned = 0.000143685 Jy ! Component: 2150 - total flux cleaned = 0.000155405 Jy ! Component: 2200 - total flux cleaned = 0.000143666 Jy ! Component: 2250 - total flux cleaned = 0.000167046 Jy ! Component: 2300 - total flux cleaned = 0.000213038 Jy ! Component: 2350 - total flux cleaned = 0.000213041 Jy ! Component: 2400 - total flux cleaned = 0.000258289 Jy ! Component: 2450 - total flux cleaned = 0.000258255 Jy ! Component: 2500 - total flux cleaned = 0.00026922 Jy ! Component: 2550 - total flux cleaned = 0.000291188 Jy ! Component: 2600 - total flux cleaned = 0.000258742 Jy ! Component: 2650 - total flux cleaned = 0.000269592 Jy ! Component: 2700 - total flux cleaned = 0.000290876 Jy ! Component: 2750 - total flux cleaned = 0.000290976 Jy ! Component: 2800 - total flux cleaned = 0.000311788 Jy ! Component: 2850 - total flux cleaned = 0.000249659 Jy ! Component: 2900 - total flux cleaned = 0.000270333 Jy ! Component: 2950 - total flux cleaned = 0.000270332 Jy ! Component: 3000 - total flux cleaned = 0.00022986 Jy ! Component: 3050 - total flux cleaned = 0.00026998 Jy ! Component: 3100 - total flux cleaned = 0.000240028 Jy ! Component: 3150 - total flux cleaned = 0.00022031 Jy ! Component: 3200 - total flux cleaned = 0.000210416 Jy ! Component: 3250 - total flux cleaned = 0.000190966 Jy ! Component: 3300 - total flux cleaned = 0.000161937 Jy ! Component: 3350 - total flux cleaned = 0.000152258 Jy ! Component: 3400 - total flux cleaned = 0.000123645 Jy ! Component: 3450 - total flux cleaned = 0.000104724 Jy ! Component: 3500 - total flux cleaned = 4.82146e-05 Jy ! Component: 3550 - total flux cleaned = 1.09578e-05 Jy ! Component: 3600 - total flux cleaned = -1.68953e-05 Jy ! Component: 3650 - total flux cleaned = -5.37789e-05 Jy ! Component: 3700 - total flux cleaned = -6.2979e-05 Jy ! Component: 3750 - total flux cleaned = -0.0001269 Jy ! Component: 3800 - total flux cleaned = -0.000135959 Jy ! Component: 3850 - total flux cleaned = -0.000190195 Jy ! Component: 3900 - total flux cleaned = -0.000226065 Jy ! Component: 3950 - total flux cleaned = -0.000252827 Jy ! Component: 4000 - total flux cleaned = -0.000288362 Jy ! Component: 4050 - total flux cleaned = -0.000323783 Jy ! Total flux subtracted in 4096 components = -0.000359032 Jy ! Clean residual min=-0.000583 max=0.000492 Jy/beam ! Clean residual mean=0.000001 rms=0.000145 Jy/beam ! Combined flux in latest and established models = 0.166584 Jy keep ! Adding 212 model components to the UV plane model. ! The established model now contains 317 components and 0.166584 Jy ![Exited script file: muppet] wmap "J2352+3947_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.866 x 5.798 at 0.5043 degrees (North through East) ! Clean map min=-0.0011359 max=0.14491 Jy/beam ! Writing clean map to FITS file: J2352+3947_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.144912 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000142786 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.295598 0.295598 0.591196 1.18239 2.36478 4.72957 9.45913 18.9183 37.8365 75.6731 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.144 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.866 x 5.798 at 0.5043 degrees (North through East) ! Clean map min=-0.0011359 max=0.14491 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2352+3947_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:38:44 2017