! Started logfile: J2350+0812_S_2014_06_09_pus_uvs.log on Wed Nov 16 20:06:59 2016 obs J2350+0812_S_2014_06_09_pus_uva.fits ! Reading UV FITS file: J2350+0812_S_2014_06_09_pus_uva.fits ! AN table 1: 114 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.604483 visibilities/baseline/integration-bin. ! Found source: J2350+0812 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 12404 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2350+0812_S_2014_06_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 242 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 242 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 242 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 242 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.867120Jy sigma=0.010301 ! Fit after self-cal, rms=0.757183Jy sigma=0.009050 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.624 mas, bmaj=8.945 mas, bpa=10.15 degrees ! Estimated noise=846.05 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.184018 Jy ! Component: 100 - total flux cleaned = 0.23445 Jy ! Total flux subtracted in 100 components = 0.23445 Jy ! Clean residual min=-0.010845 max=0.024110 Jy/beam ! Clean residual mean=0.000068 rms=0.004127 Jy/beam ! Combined flux in latest and established models = 0.23445 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.23445 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092239Jy sigma=0.001049 ! Fit after self-cal, rms=0.092208Jy sigma=0.001048 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.31 mas, bmaj=9.935 mas, bpa=8.528 degrees ! Estimated noise=539.453 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0342755 Jy ! Component: 100 - total flux cleaned = 0.0524534 Jy ! Component: 150 - total flux cleaned = 0.0630362 Jy ! Component: 200 - total flux cleaned = 0.0693534 Jy ! Total flux subtracted in 200 components = 0.0693534 Jy ! Clean residual min=-0.006904 max=0.014773 Jy/beam ! Clean residual mean=0.000024 rms=0.001884 Jy/beam ! Combined flux in latest and established models = 0.303803 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 33 components and 0.303803 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079171Jy sigma=0.000879 ! Fit after self-cal, rms=0.079104Jy sigma=0.000878 ! Inverting map ! Added new window around map position (7, 3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0123612 Jy ! Component: 100 - total flux cleaned = 0.0156805 Jy ! Component: 150 - total flux cleaned = 0.0170072 Jy ! Component: 200 - total flux cleaned = 0.0173635 Jy ! Total flux subtracted in 200 components = 0.0173635 Jy ! Clean residual min=-0.005225 max=0.005460 Jy/beam ! Clean residual mean=0.000005 rms=0.001279 Jy/beam ! Combined flux in latest and established models = 0.321167 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 56 components and 0.321167 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077025Jy sigma=0.000857 ! Fit after self-cal, rms=0.076878Jy sigma=0.000855 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.86 HN 0.95 KP 1.03 ! LA 1.16 MK 1.00* NL 1.06 OV 0.94 ! PT 1.00 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 0.99 KP 1.01 ! LA 1.13 MK 1.00* NL 1.07 OV 1.02 ! PT 1.00 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.15 HN 1.00 KP 0.91 ! LA 0.89 MK 1.00* NL 0.96 OV 0.96 ! PT 0.97 SC 1.05 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 0.99 KP 0.89 ! LA 0.86 MK 1.00* NL 1.04 OV 1.03 ! PT 1.04 SC 0.99 ! ! ! Fit before self-cal, rms=0.076878Jy sigma=0.000855 ! Fit after self-cal, rms=0.071467Jy sigma=0.000792 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.306 mas, bmaj=9.934 mas, bpa=8.259 degrees ! Estimated noise=539.566 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000242005 Jy ! Component: 100 - total flux cleaned = 0.000501435 Jy ! Component: 150 - total flux cleaned = 0.000655775 Jy ! Component: 200 - total flux cleaned = 0.000654878 Jy ! Total flux subtracted in 200 components = 0.000654878 Jy ! Clean residual min=-0.002759 max=0.002830 Jy/beam ! Clean residual mean=-0.000001 rms=0.000755 Jy/beam ! Combined flux in latest and established models = 0.321822 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 73 components and 0.321822 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071273Jy sigma=0.000790 ! Fit after self-cal, rms=0.071266Jy sigma=0.000789 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071266Jy sigma=0.000789 ! Fit after self-cal, rms=0.070587Jy sigma=0.000783 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.303 mas, bmaj=9.935 mas, bpa=8.333 degrees ! Estimated noise=539.909 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000679433 Jy ! Component: 100 - total flux cleaned = 0.000789122 Jy ! Component: 150 - total flux cleaned = 0.000791787 Jy ! Component: 200 - total flux cleaned = 0.00070079 Jy ! Total flux subtracted in 200 components = 0.00070079 Jy ! Clean residual min=-0.002254 max=0.002115 Jy/beam ! Clean residual mean=-0.000002 rms=0.000518 Jy/beam ! Combined flux in latest and established models = 0.322522 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 89 components and 0.322522 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070488Jy sigma=0.000782 ! Fit after self-cal, rms=0.070483Jy sigma=0.000782 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000608877 Jy ! Component: 100 - total flux cleaned = 0.000653908 Jy ! Component: 150 - total flux cleaned = 0.000618261 Jy ! Component: 200 - total flux cleaned = 0.00055077 Jy ! Total flux subtracted in 200 components = 0.00055077 Jy ! Clean residual min=-0.002104 max=0.001994 Jy/beam ! Clean residual mean=-0.000002 rms=0.000483 Jy/beam ! Combined flux in latest and established models = 0.323073 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 102 components and 0.323073 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070440Jy sigma=0.000781 ! Fit after self-cal, rms=0.070439Jy sigma=0.000781 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070439Jy sigma=0.000781 ! Fit after self-cal, rms=0.070443Jy sigma=0.000781 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.302 mas, bmaj=9.944 mas, bpa=8.386 degrees ! Estimated noise=540.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.66103e-05 Jy ! Component: 100 - total flux cleaned = 6.43848e-05 Jy ! Component: 150 - total flux cleaned = 9.80978e-05 Jy ! Component: 200 - total flux cleaned = 9.73291e-05 Jy ! Total flux subtracted in 200 components = 9.73291e-05 Jy ! Clean residual min=-0.001962 max=0.001887 Jy/beam ! Clean residual mean=-0.000003 rms=0.000451 Jy/beam ! Combined flux in latest and established models = 0.32317 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 110 components and 0.32317 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070413Jy sigma=0.000781 ! Fit after self-cal, rms=0.070412Jy sigma=0.000781 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000266852 Jy ! Component: 100 - total flux cleaned = 0.000188473 Jy ! Component: 150 - total flux cleaned = 0.000164151 Jy ! Component: 200 - total flux cleaned = 0.000140042 Jy ! Total flux subtracted in 200 components = 0.000140042 Jy ! Clean residual min=-0.001850 max=0.001841 Jy/beam ! Clean residual mean=-0.000003 rms=0.000436 Jy/beam ! Combined flux in latest and established models = 0.32331 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 118 components and 0.32331 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070394Jy sigma=0.000781 ! Fit after self-cal, rms=0.070393Jy sigma=0.000781 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070393Jy sigma=0.000781 ! Fit after self-cal, rms=0.070451Jy sigma=0.000781 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.823 mas, bmaj=14.54 mas, bpa=-9.411 degrees ! Estimated noise=608.111 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000289623 Jy ! Component: 100 - total flux cleaned = -0.000385 Jy ! Component: 150 - total flux cleaned = -0.000444484 Jy ! Component: 200 - total flux cleaned = -0.000496396 Jy ! Total flux subtracted in 200 components = -0.000496396 Jy ! Clean residual min=-0.001865 max=0.001569 Jy/beam ! Clean residual mean=-0.000004 rms=0.000456 Jy/beam ! Combined flux in latest and established models = 0.322814 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 132 components and 0.322814 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070441Jy sigma=0.000781 ! Fit after self-cal, rms=0.070443Jy sigma=0.000781 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.96727e-05 Jy ! Component: 100 - total flux cleaned = -6.25229e-05 Jy ! Component: 150 - total flux cleaned = -0.000137976 Jy ! Component: 200 - total flux cleaned = -0.000195221 Jy ! Total flux subtracted in 200 components = -0.000195221 Jy ! Clean residual min=-0.001866 max=0.001554 Jy/beam ! Clean residual mean=-0.000004 rms=0.000446 Jy/beam ! Combined flux in latest and established models = 0.322619 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 138 components and 0.322619 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070438Jy sigma=0.000781 ! Fit after self-cal, rms=0.070438Jy sigma=0.000781 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.301 mas, bmaj=9.951 mas, bpa=8.421 degrees ! Estimated noise=540.42 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.301 x 9.951 at 8.421 degrees (North through East) ! Clean map min=-0.0020477 max=0.24446 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.62 mas, bmaj=8.952 mas, bpa=10.14 degrees ! Estimated noise=838.717 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.182317 Jy ! Component: 100 - total flux cleaned = 0.232516 Jy ! Component: 150 - total flux cleaned = 0.260958 Jy ! Component: 200 - total flux cleaned = 0.279523 Jy ! Total flux subtracted in 200 components = 0.279523 Jy ! Clean residual min=-0.005323 max=0.009960 Jy/beam ! Clean residual mean=0.000027 rms=0.001770 Jy/beam ! Combined flux in latest and established models = 0.279523 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.279523 Jy ! Inverting map and beam ! Estimated beam: bmin=4.301 mas, bmaj=9.951 mas, bpa=8.421 degrees ! Estimated noise=540.42 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0162937 Jy ! Component: 100 - total flux cleaned = 0.0255915 Jy ! Component: 150 - total flux cleaned = 0.0312907 Jy ! Component: 200 - total flux cleaned = 0.0351251 Jy ! Total flux subtracted in 200 components = 0.0351251 Jy ! Clean residual min=-0.002026 max=0.002370 Jy/beam ! Clean residual mean=0.000007 rms=0.000597 Jy/beam ! Combined flux in latest and established models = 0.314648 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 72 components and 0.314648 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.823 mas, bmaj=14.54 mas, bpa=-9.411 degrees ! Estimated noise=608.111 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00376153 Jy ! Component: 100 - total flux cleaned = 0.00600014 Jy ! Component: 150 - total flux cleaned = 0.00741466 Jy ! Component: 200 - total flux cleaned = 0.00785262 Jy ! Total flux subtracted in 200 components = 0.00785262 Jy ! Clean residual min=-0.001842 max=0.001750 Jy/beam ! Clean residual mean=-0.000003 rms=0.000511 Jy/beam ! Combined flux in latest and established models = 0.322501 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000363112 Jy ! Component: 100 - total flux cleaned = 0.00054831 Jy ! Component: 150 - total flux cleaned = 0.000656934 Jy ! Component: 200 - total flux cleaned = 0.000632324 Jy ! Total flux subtracted in 200 components = 0.000632324 Jy ! Clean residual min=-0.001883 max=0.001523 Jy/beam ! Clean residual mean=-0.000004 rms=0.000488 Jy/beam ! Combined flux in latest and established models = 0.323133 Jy ! Adding 66 model components to the UV plane model. ! The established model now contains 131 components and 0.323133 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.301 mas, bmaj=9.951 mas, bpa=8.421 degrees ! Estimated noise=540.42 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000240518 Jy ! Component: 100 - total flux cleaned = 8.2349e-05 Jy ! Component: 150 - total flux cleaned = 2.01529e-07 Jy ! Component: 200 - total flux cleaned = -2.44766e-05 Jy ! Total flux subtracted in 200 components = -2.44766e-05 Jy ! Clean residual min=-0.001744 max=0.001705 Jy/beam ! Clean residual mean=-0.000002 rms=0.000417 Jy/beam ! Combined flux in latest and established models = 0.323109 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 149 components and 0.323109 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070416Jy sigma=0.000780 ! Fit after self-cal, rms=0.070405Jy sigma=0.000780 wmodel J2350+0812_S_2014_06_09_pus_map.mod ! Writing 149 model components to file: J2350+0812_S_2014_06_09_pus_map.mod wobs J2350+0812_S_2014_06_09_pus_uvs.fits ! Writing UV FITS file: J2350+0812_S_2014_06_09_pus_uvs.fits wwins J2350+0812_S_2014_06_09_pus_map.win ! wwins: Wrote 2 windows to J2350+0812_S_2014_06_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -7.87588e-05 Jy ! Component: 100 - total flux cleaned = -0.000130064 Jy ! Component: 150 - total flux cleaned = -0.000232633 Jy ! Component: 200 - total flux cleaned = -0.000207699 Jy ! Component: 250 - total flux cleaned = -0.000161689 Jy ! Component: 300 - total flux cleaned = -0.000139725 Jy ! Component: 350 - total flux cleaned = -0.000118515 Jy ! Component: 400 - total flux cleaned = -0.000199441 Jy ! Component: 450 - total flux cleaned = -0.000297584 Jy ! Component: 500 - total flux cleaned = -0.000374166 Jy ! Component: 550 - total flux cleaned = -0.000468077 Jy ! Component: 600 - total flux cleaned = -0.000559233 Jy ! Component: 650 - total flux cleaned = -0.000647638 Jy ! Component: 700 - total flux cleaned = -0.000699698 Jy ! Component: 750 - total flux cleaned = -0.000734074 Jy ! Component: 800 - total flux cleaned = -0.000817128 Jy ! Component: 850 - total flux cleaned = -0.000898226 Jy ! Component: 900 - total flux cleaned = -0.000977425 Jy ! Component: 950 - total flux cleaned = -0.00105516 Jy ! Component: 1000 - total flux cleaned = -0.00111616 Jy ! Component: 1050 - total flux cleaned = -0.00117579 Jy ! Component: 1100 - total flux cleaned = -0.00120513 Jy ! Component: 1150 - total flux cleaned = -0.00121957 Jy ! Component: 1200 - total flux cleaned = -0.00124804 Jy ! Component: 1250 - total flux cleaned = -0.00126227 Jy ! Component: 1300 - total flux cleaned = -0.00126259 Jy ! Component: 1350 - total flux cleaned = -0.00127619 Jy ! Component: 1400 - total flux cleaned = -0.00126271 Jy ! Component: 1450 - total flux cleaned = -0.0013019 Jy ! Component: 1500 - total flux cleaned = -0.00126304 Jy ! Component: 1550 - total flux cleaned = -0.0012758 Jy ! Component: 1600 - total flux cleaned = -0.00130119 Jy ! Component: 1650 - total flux cleaned = -0.00135095 Jy ! Component: 1700 - total flux cleaned = -0.00136283 Jy ! Component: 1750 - total flux cleaned = -0.00132667 Jy ! Component: 1800 - total flux cleaned = -0.0013387 Jy ! Component: 1850 - total flux cleaned = -0.00138573 Jy ! Component: 1900 - total flux cleaned = -0.00139705 Jy ! Component: 1950 - total flux cleaned = -0.00138559 Jy ! Component: 2000 - total flux cleaned = -0.00138574 Jy ! Component: 2050 - total flux cleaned = -0.00138561 Jy ! Component: 2100 - total flux cleaned = -0.00138561 Jy ! Component: 2150 - total flux cleaned = -0.00133109 Jy ! Component: 2200 - total flux cleaned = -0.00132051 Jy ! Component: 2250 - total flux cleaned = -0.00129944 Jy ! Component: 2300 - total flux cleaned = -0.00132049 Jy ! Component: 2350 - total flux cleaned = -0.00127879 Jy ! Component: 2400 - total flux cleaned = -0.00125843 Jy ! Component: 2450 - total flux cleaned = -0.00123821 Jy ! Component: 2500 - total flux cleaned = -0.00124815 Jy ! Component: 2550 - total flux cleaned = -0.00121823 Jy ! Component: 2600 - total flux cleaned = -0.00118869 Jy ! Component: 2650 - total flux cleaned = -0.00119835 Jy ! Component: 2700 - total flux cleaned = -0.00120801 Jy ! Component: 2750 - total flux cleaned = -0.00118882 Jy ! Component: 2800 - total flux cleaned = -0.00119827 Jy ! Component: 2850 - total flux cleaned = -0.00118897 Jy ! Component: 2900 - total flux cleaned = -0.00120759 Jy ! Component: 2950 - total flux cleaned = -0.00119838 Jy ! Component: 3000 - total flux cleaned = -0.00122568 Jy ! Component: 3050 - total flux cleaned = -0.00122571 Jy ! Component: 3100 - total flux cleaned = -0.00124371 Jy ! Component: 3150 - total flux cleaned = -0.00124367 Jy ! Component: 3200 - total flux cleaned = -0.00125248 Jy ! Component: 3250 - total flux cleaned = -0.00124372 Jy ! Component: 3300 - total flux cleaned = -0.00126945 Jy ! Component: 3350 - total flux cleaned = -0.00127794 Jy ! Component: 3400 - total flux cleaned = -0.0012441 Jy ! Component: 3450 - total flux cleaned = -0.00124415 Jy ! Component: 3500 - total flux cleaned = -0.00121908 Jy ! Component: 3550 - total flux cleaned = -0.00120257 Jy ! Component: 3600 - total flux cleaned = -0.00119439 Jy ! Component: 3650 - total flux cleaned = -0.00119445 Jy ! Component: 3700 - total flux cleaned = -0.00117822 Jy ! Component: 3750 - total flux cleaned = -0.00117018 Jy ! Component: 3800 - total flux cleaned = -0.00115431 Jy ! Component: 3850 - total flux cleaned = -0.00116223 Jy ! Component: 3900 - total flux cleaned = -0.00117001 Jy ! Component: 3950 - total flux cleaned = -0.00115444 Jy ! Component: 4000 - total flux cleaned = -0.0011313 Jy ! Component: 4050 - total flux cleaned = -0.00112365 Jy ! Total flux subtracted in 4096 components = -0.00113886 Jy ! Clean residual min=-0.000391 max=0.000471 Jy/beam ! Clean residual mean=-0.000000 rms=0.000143 Jy/beam ! Combined flux in latest and established models = 0.32197 Jy keep ! Adding 259 model components to the UV plane model. ! The established model now contains 408 components and 0.32197 Jy ![Exited script file: muppet] wmap "J2350+0812_S_2014_06_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.301 x 9.951 at 8.421 degrees (North through East) ! Clean map min=-0.0010091 max=0.24303 Jy/beam ! Writing clean map to FITS file: J2350+0812_S_2014_06_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.243028 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000141685 device "J2350+0812_S_2014_06_09_pus\_map.eps/VPS" ! Attempting to open device: 'J2350+0812_S_2014_06_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.1749 0.1749 0.3498 0.699599 1.3992 2.7984 5.59679 11.1936 22.3872 44.7743 89.5487 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.243 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.301 x 9.951 at 8.421 degrees (North through East) ! Clean map min=-0.0010091 max=0.24303 Jy/beam quit ! Quitting program ! Log file J2350+0812_S_2014_06_09_pus_uvs.log closed on Wed Nov 16 20:07:04 2016