! Started logfile: J2349+3849_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:38:30 2017 obs J2349+3849_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J2349+3849_S_2014_01_04_pus_uva.fits ! AN table 1: 60 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.5 visibilities/baseline/integration-bin. ! Found source: J2349+3849 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 4320 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2349+3849_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 150 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 150 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 150 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 150 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.739422Jy sigma=0.011649 ! Fit after self-cal, rms=0.722689Jy sigma=0.011451 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.138 mas, bmaj=4.857 mas, bpa=-4.223 degrees ! Estimated noise=1098.49 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.211351 Jy ! Component: 100 - total flux cleaned = 0.260868 Jy ! Total flux subtracted in 100 components = 0.260868 Jy ! Clean residual min=-0.011483 max=0.018485 Jy/beam ! Clean residual mean=0.000047 rms=0.003401 Jy/beam ! Combined flux in latest and established models = 0.260868 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.260868 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082937Jy sigma=0.001097 ! Fit after self-cal, rms=0.082869Jy sigma=0.001097 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.862 mas, bmaj=5.736 mas, bpa=-0.2606 degrees ! Estimated noise=731.839 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0223264 Jy ! Component: 100 - total flux cleaned = 0.0339444 Jy ! Component: 150 - total flux cleaned = 0.0412791 Jy ! Component: 200 - total flux cleaned = 0.0459887 Jy ! Total flux subtracted in 200 components = 0.0459887 Jy ! Clean residual min=-0.009201 max=0.010476 Jy/beam ! Clean residual mean=0.000014 rms=0.002383 Jy/beam ! Combined flux in latest and established models = 0.306857 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 25 components and 0.306857 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075023Jy sigma=0.001022 ! Fit after self-cal, rms=0.074931Jy sigma=0.001022 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00* KP 1.00* LA 1.01 ! MK 1.01 NL 0.97 OV 0.98 PT 1.00 ! SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.00* KP 1.00* LA 1.00 ! MK 0.99 NL 1.01 OV 1.02 PT 0.97 ! SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* KP 1.00* LA 0.80 ! MK 1.08 NL 0.99 OV 0.94 PT 0.96 ! SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.18 FD 1.00* KP 1.00* LA 0.87 ! MK 1.07 NL 1.07 OV 1.00 PT 0.98 ! SC 0.94 ! ! ! Fit before self-cal, rms=0.074931Jy sigma=0.001022 ! Fit after self-cal, rms=0.067509Jy sigma=0.000909 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.873 mas, bmaj=5.816 mas, bpa=0.3534 degrees ! Estimated noise=735.342 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000658095 Jy ! Component: 100 - total flux cleaned = -0.000805032 Jy ! Component: 150 - total flux cleaned = -0.000927664 Jy ! Component: 200 - total flux cleaned = -0.000981085 Jy ! Total flux subtracted in 200 components = -0.000981085 Jy ! Clean residual min=-0.004327 max=0.004663 Jy/beam ! Clean residual mean=-0.000002 rms=0.001055 Jy/beam ! Combined flux in latest and established models = 0.305876 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 33 components and 0.305876 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067353Jy sigma=0.000907 ! Fit after self-cal, rms=0.067104Jy sigma=0.000906 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067104Jy sigma=0.000906 ! Fit after self-cal, rms=0.066737Jy sigma=0.000904 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.866 mas, bmaj=5.809 mas, bpa=0.2069 degrees ! Estimated noise=734.623 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000219938 Jy ! Component: 100 - total flux cleaned = -0.000265465 Jy ! Component: 150 - total flux cleaned = -0.000346503 Jy ! Component: 200 - total flux cleaned = -0.000380778 Jy ! Total flux subtracted in 200 components = -0.000380778 Jy ! Clean residual min=-0.004054 max=0.004439 Jy/beam ! Clean residual mean=-0.000004 rms=0.000960 Jy/beam ! Combined flux in latest and established models = 0.305495 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 35 components and 0.305495 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066659Jy sigma=0.000903 ! Fit after self-cal, rms=0.066646Jy sigma=0.000903 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (52.5, 98). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00383055 Jy ! Component: 100 - total flux cleaned = 0.00546981 Jy ! Component: 150 - total flux cleaned = 0.00633 Jy ! Component: 200 - total flux cleaned = 0.00648865 Jy ! Total flux subtracted in 200 components = 0.00648865 Jy ! Clean residual min=-0.003513 max=0.003597 Jy/beam ! Clean residual mean=-0.000004 rms=0.000793 Jy/beam ! Combined flux in latest and established models = 0.311984 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 59 components and 0.311984 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066386Jy sigma=0.000899 ! Fit after self-cal, rms=0.066372Jy sigma=0.000899 ! Inverting map ! Added new window around map position (-12, 38). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00304002 Jy ! Component: 100 - total flux cleaned = 0.00432456 Jy ! Component: 150 - total flux cleaned = 0.0050838 Jy ! Component: 200 - total flux cleaned = 0.00531838 Jy ! Total flux subtracted in 200 components = 0.00531838 Jy ! Clean residual min=-0.003211 max=0.002740 Jy/beam ! Clean residual mean=0.000002 rms=0.000657 Jy/beam ! Combined flux in latest and established models = 0.317302 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 77 components and 0.317302 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066194Jy sigma=0.000896 ! Fit after self-cal, rms=0.066180Jy sigma=0.000896 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066180Jy sigma=0.000896 ! Fit after self-cal, rms=0.065851Jy sigma=0.000896 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.86 mas, bmaj=5.804 mas, bpa=0.1999 degrees ! Estimated noise=732.949 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000958539 Jy ! Component: 100 - total flux cleaned = 0.00137281 Jy ! Component: 150 - total flux cleaned = 0.0016633 Jy ! Component: 200 - total flux cleaned = 0.00177886 Jy ! Total flux subtracted in 200 components = 0.00177886 Jy ! Clean residual min=-0.002842 max=0.002405 Jy/beam ! Clean residual mean=0.000002 rms=0.000594 Jy/beam ! Combined flux in latest and established models = 0.319081 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 86 components and 0.319081 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065787Jy sigma=0.000895 ! Fit after self-cal, rms=0.065782Jy sigma=0.000895 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000188139 Jy ! Component: 100 - total flux cleaned = 0.000327818 Jy ! Component: 150 - total flux cleaned = 0.000489726 Jy ! Component: 200 - total flux cleaned = 0.000550117 Jy ! Total flux subtracted in 200 components = 0.000550117 Jy ! Clean residual min=-0.002727 max=0.002363 Jy/beam ! Clean residual mean=0.000003 rms=0.000574 Jy/beam ! Combined flux in latest and established models = 0.319631 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 97 components and 0.319631 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065747Jy sigma=0.000894 ! Fit after self-cal, rms=0.065746Jy sigma=0.000894 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065746Jy sigma=0.000894 ! Fit after self-cal, rms=0.065654Jy sigma=0.000894 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.807 mas, bmaj=9.678 mas, bpa=13.52 degrees ! Estimated noise=821.205 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00037351 Jy ! Component: 100 - total flux cleaned = 0.000403657 Jy ! Component: 150 - total flux cleaned = 0.000323384 Jy ! Component: 200 - total flux cleaned = 0.000254339 Jy ! Total flux subtracted in 200 components = 0.000254339 Jy ! Clean residual min=-0.002377 max=0.002357 Jy/beam ! Clean residual mean=0.000003 rms=0.000605 Jy/beam ! Combined flux in latest and established models = 0.319885 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 107 components and 0.319885 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065645Jy sigma=0.000894 ! Fit after self-cal, rms=0.065646Jy sigma=0.000894 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000142965 Jy ! Component: 100 - total flux cleaned = 0.000211895 Jy ! Component: 150 - total flux cleaned = 0.00014009 Jy ! Component: 200 - total flux cleaned = 0.000107991 Jy ! Total flux subtracted in 200 components = 0.000107991 Jy ! Clean residual min=-0.002286 max=0.002246 Jy/beam ! Clean residual mean=0.000003 rms=0.000590 Jy/beam ! Combined flux in latest and established models = 0.319993 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 115 components and 0.319993 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065646Jy sigma=0.000894 ! Fit after self-cal, rms=0.065647Jy sigma=0.000894 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.858 mas, bmaj=5.801 mas, bpa=0.2403 degrees ! Estimated noise=732.399 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.858 x 5.801 at 0.2403 degrees (North through East) ! Clean map min=-0.0023401 max=0.27276 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.131 mas, bmaj=4.89 mas, bpa=-3.432 degrees ! Estimated noise=1101.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.21184 Jy ! Component: 100 - total flux cleaned = 0.261332 Jy ! Component: 150 - total flux cleaned = 0.279606 Jy ! Component: 200 - total flux cleaned = 0.28877 Jy ! Total flux subtracted in 200 components = 0.28877 Jy ! Clean residual min=-0.005539 max=0.005517 Jy/beam ! Clean residual mean=0.000011 rms=0.001430 Jy/beam ! Combined flux in latest and established models = 0.28877 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.28877 Jy ! Inverting map and beam ! Estimated beam: bmin=3.858 mas, bmaj=5.801 mas, bpa=0.2403 degrees ! Estimated noise=732.399 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00640142 Jy ! Component: 100 - total flux cleaned = 0.0108558 Jy ! Component: 150 - total flux cleaned = 0.0143307 Jy ! Component: 200 - total flux cleaned = 0.0171338 Jy ! Total flux subtracted in 200 components = 0.0171338 Jy ! Clean residual min=-0.002935 max=0.003220 Jy/beam ! Clean residual mean=0.000005 rms=0.000775 Jy/beam ! Combined flux in latest and established models = 0.305904 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 52 components and 0.305904 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.807 mas, bmaj=9.678 mas, bpa=13.52 degrees ! Estimated noise=821.205 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00353058 Jy ! Component: 100 - total flux cleaned = 0.00576205 Jy ! Component: 150 - total flux cleaned = 0.00737362 Jy ! Component: 200 - total flux cleaned = 0.00854885 Jy ! Total flux subtracted in 200 components = 0.00854885 Jy ! Clean residual min=-0.002486 max=0.002420 Jy/beam ! Clean residual mean=0.000004 rms=0.000719 Jy/beam ! Combined flux in latest and established models = 0.314453 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000812078 Jy ! Component: 100 - total flux cleaned = 0.00151815 Jy ! Component: 150 - total flux cleaned = 0.00207427 Jy ! Component: 200 - total flux cleaned = 0.00242421 Jy ! Total flux subtracted in 200 components = 0.00242421 Jy ! Clean residual min=-0.002332 max=0.002274 Jy/beam ! Clean residual mean=0.000004 rms=0.000657 Jy/beam ! Combined flux in latest and established models = 0.316877 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 99 components and 0.316877 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.858 mas, bmaj=5.801 mas, bpa=0.2403 degrees ! Estimated noise=732.399 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000793077 Jy ! Component: 100 - total flux cleaned = 0.00126423 Jy ! Component: 150 - total flux cleaned = 0.0015187 Jy ! Component: 200 - total flux cleaned = 0.00167573 Jy ! Total flux subtracted in 200 components = 0.00167573 Jy ! Clean residual min=-0.002380 max=0.002362 Jy/beam ! Clean residual mean=0.000004 rms=0.000567 Jy/beam ! Combined flux in latest and established models = 0.318553 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 120 components and 0.318553 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065676Jy sigma=0.000894 ! Fit after self-cal, rms=0.065680Jy sigma=0.000894 wmodel J2349+3849_S_2014_01_04_pus_map.mod ! Writing 120 model components to file: J2349+3849_S_2014_01_04_pus_map.mod wobs J2349+3849_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J2349+3849_S_2014_01_04_pus_uvs.fits wwins J2349+3849_S_2014_01_04_pus_map.win ! wwins: Wrote 3 windows to J2349+3849_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -5.14811e-05 Jy ! Component: 100 - total flux cleaned = 2.79116e-05 Jy ! Component: 150 - total flux cleaned = 6.26199e-05 Jy ! Component: 200 - total flux cleaned = 0.000162579 Jy ! Component: 250 - total flux cleaned = 0.000194626 Jy ! Component: 300 - total flux cleaned = 0.000195345 Jy ! Component: 350 - total flux cleaned = 0.000253946 Jy ! Component: 400 - total flux cleaned = 0.000281465 Jy ! Component: 450 - total flux cleaned = 0.000334028 Jy ! Component: 500 - total flux cleaned = 0.000334003 Jy ! Component: 550 - total flux cleaned = 0.000382974 Jy ! Component: 600 - total flux cleaned = 0.000358417 Jy ! Component: 650 - total flux cleaned = 0.00033488 Jy ! Component: 700 - total flux cleaned = 0.000357324 Jy ! Component: 750 - total flux cleaned = 0.000357231 Jy ! Component: 800 - total flux cleaned = 0.000377783 Jy ! Component: 850 - total flux cleaned = 0.000458368 Jy ! Component: 900 - total flux cleaned = 0.000497147 Jy ! Component: 950 - total flux cleaned = 0.000593185 Jy ! Component: 1000 - total flux cleaned = 0.000724453 Jy ! Component: 1050 - total flux cleaned = 0.000816211 Jy ! Component: 1100 - total flux cleaned = 0.000905732 Jy ! Component: 1150 - total flux cleaned = 0.00101067 Jy ! Component: 1200 - total flux cleaned = 0.00107894 Jy ! Component: 1250 - total flux cleaned = 0.00114597 Jy ! Component: 1300 - total flux cleaned = 0.00122805 Jy ! Component: 1350 - total flux cleaned = 0.00129224 Jy ! Component: 1400 - total flux cleaned = 0.0013083 Jy ! Component: 1450 - total flux cleaned = 0.0013702 Jy ! Component: 1500 - total flux cleaned = 0.00140062 Jy ! Component: 1550 - total flux cleaned = 0.00144589 Jy ! Component: 1600 - total flux cleaned = 0.00143145 Jy ! Component: 1650 - total flux cleaned = 0.00151894 Jy ! Component: 1700 - total flux cleaned = 0.00154738 Jy ! Component: 1750 - total flux cleaned = 0.00156156 Jy ! Component: 1800 - total flux cleaned = 0.00157567 Jy ! Component: 1850 - total flux cleaned = 0.0015895 Jy ! Component: 1900 - total flux cleaned = 0.00161665 Jy ! Component: 1950 - total flux cleaned = 0.00166987 Jy ! Component: 2000 - total flux cleaned = 0.00169602 Jy ! Component: 2050 - total flux cleaned = 0.00169606 Jy ! Component: 2100 - total flux cleaned = 0.00172181 Jy ! Component: 2150 - total flux cleaned = 0.0017093 Jy ! Component: 2200 - total flux cleaned = 0.00172192 Jy ! Component: 2250 - total flux cleaned = 0.00170969 Jy ! Component: 2300 - total flux cleaned = 0.00168525 Jy ! Component: 2350 - total flux cleaned = 0.00169719 Jy ! Component: 2400 - total flux cleaned = 0.00164925 Jy ! Component: 2450 - total flux cleaned = 0.00162569 Jy ! Component: 2500 - total flux cleaned = 0.00162566 Jy ! Component: 2550 - total flux cleaned = 0.00160234 Jy ! Component: 2600 - total flux cleaned = 0.00157926 Jy ! Component: 2650 - total flux cleaned = 0.00156789 Jy ! Component: 2700 - total flux cleaned = 0.00155658 Jy ! Component: 2750 - total flux cleaned = 0.00150071 Jy ! Component: 2800 - total flux cleaned = 0.00151194 Jy ! Component: 2850 - total flux cleaned = 0.00148997 Jy ! Component: 2900 - total flux cleaned = 0.00147901 Jy ! Component: 2950 - total flux cleaned = 0.00146822 Jy ! Component: 3000 - total flux cleaned = 0.00146814 Jy ! Component: 3050 - total flux cleaned = 0.00142549 Jy ! Component: 3100 - total flux cleaned = 0.0014573 Jy ! Component: 3150 - total flux cleaned = 0.00144677 Jy ! Component: 3200 - total flux cleaned = 0.00146768 Jy ! Component: 3250 - total flux cleaned = 0.00146771 Jy ! Component: 3300 - total flux cleaned = 0.00143677 Jy ! Component: 3350 - total flux cleaned = 0.00141625 Jy ! Component: 3400 - total flux cleaned = 0.00143668 Jy ! Component: 3450 - total flux cleaned = 0.00140616 Jy ! Component: 3500 - total flux cleaned = 0.00134558 Jy ! Component: 3550 - total flux cleaned = 0.00130543 Jy ! Component: 3600 - total flux cleaned = 0.00129544 Jy ! Component: 3650 - total flux cleaned = 0.00122568 Jy ! Component: 3700 - total flux cleaned = 0.00120588 Jy ! Component: 3750 - total flux cleaned = 0.0011565 Jy ! Component: 3800 - total flux cleaned = 0.00113679 Jy ! Component: 3850 - total flux cleaned = 0.00111722 Jy ! Component: 3900 - total flux cleaned = 0.0010781 Jy ! Component: 3950 - total flux cleaned = 0.00103912 Jy ! Component: 4000 - total flux cleaned = 0.00101963 Jy ! Component: 4050 - total flux cleaned = 0.000951792 Jy ! Total flux subtracted in 4096 components = 0.000922771 Jy ! Clean residual min=-0.000573 max=0.000547 Jy/beam ! Clean residual mean=-0.000003 rms=0.000164 Jy/beam ! Combined flux in latest and established models = 0.319475 Jy keep ! Adding 259 model components to the UV plane model. ! The established model now contains 379 components and 0.319475 Jy ![Exited script file: muppet] wmap "J2349+3849_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.858 x 5.801 at 0.2403 degrees (North through East) ! Clean map min=-0.0012308 max=0.27371 Jy/beam ! Writing clean map to FITS file: J2349+3849_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.273713 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000160253 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.175644 0.175644 0.351288 0.702576 1.40515 2.81031 5.62061 11.2412 22.4824 44.9649 89.9298 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.273 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.858 x 5.801 at 0.2403 degrees (North through East) ! Clean map min=-0.0012308 max=0.27371 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2349+3849_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:38:34 2017