! Started logfile: J2344+8226_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:38:25 2017 obs J2344+8226_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J2344+8226_S_2014_01_04_pus_uva.fits ! AN table 1: 125 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.681333 visibilities/baseline/integration-bin. ! Found source: J2344+8226 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 12264 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2344+8226_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 187 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 187 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 187 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 187 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.809259Jy sigma=0.009542 ! Fit after self-cal, rms=0.762983Jy sigma=0.008945 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.426 mas, bmaj=10.07 mas, bpa=-21.01 degrees ! Estimated noise=963.829 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.330642 Jy ! Component: 100 - total flux cleaned = 0.527727 Jy ! Total flux subtracted in 100 components = 0.527727 Jy ! Clean residual min=-0.068708 max=0.114684 Jy/beam ! Clean residual mean=-0.000476 rms=0.024852 Jy/beam ! Combined flux in latest and established models = 0.527727 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.527727 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.484991Jy sigma=0.005939 ! Fit after self-cal, rms=0.484209Jy sigma=0.005933 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.085 mas, bmaj=11.21 mas, bpa=-21.11 degrees ! Estimated noise=516.242 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.246285 Jy ! Component: 100 - total flux cleaned = 0.396021 Jy ! Component: 150 - total flux cleaned = 0.502284 Jy ! Component: 200 - total flux cleaned = 0.584936 Jy ! Total flux subtracted in 200 components = 0.584936 Jy ! Clean residual min=-0.079772 max=0.136513 Jy/beam ! Clean residual mean=-0.000570 rms=0.030643 Jy/beam ! Combined flux in latest and established models = 1.11266 Jy ! Performing phase self-cal ! Adding 75 model components to the UV plane model. ! The established model now contains 88 components and 1.11266 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.304674Jy sigma=0.003687 ! Fit after self-cal, rms=0.299336Jy sigma=0.003643 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.18 FD 0.75 KP 1.00* LA 0.85 ! MK 1.36 NL 1.28 OV 0.87 PT 0.88 ! SC 1.07 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.25 FD 0.92 KP 1.00* LA 0.82 ! MK 1.38 NL 1.23 OV 0.92 PT 0.85 ! SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.07 KP 1.00* LA 0.68 ! MK 1.51 NL 1.20 OV 0.86 PT 0.83 ! SC 0.97 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.40 FD 0.97 KP 1.00* LA 0.76 ! MK 1.27 NL 1.32 OV 0.92 PT 0.88 ! SC 0.97 ! ! ! Fit before self-cal, rms=0.299336Jy sigma=0.003643 ! Fit after self-cal, rms=0.204478Jy sigma=0.002890 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.314 mas, bmaj=11.3 mas, bpa=-22 degrees ! Estimated noise=540.736 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00148168 Jy ! Component: 100 - total flux cleaned = 0.00161012 Jy ! Component: 150 - total flux cleaned = 0.000730095 Jy ! Component: 200 - total flux cleaned = -4.65644e-05 Jy ! Total flux subtracted in 200 components = -4.65644e-05 Jy ! Clean residual min=-0.054448 max=0.105015 Jy/beam ! Clean residual mean=-0.000434 rms=0.021861 Jy/beam ! Combined flux in latest and established models = 1.11262 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 102 components and 1.11262 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.197013Jy sigma=0.002773 ! Fit after self-cal, rms=0.196225Jy sigma=0.002762 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.196225Jy sigma=0.002762 ! Fit after self-cal, rms=0.195783Jy sigma=0.002639 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.32 mas, bmaj=11.45 mas, bpa=-23.11 degrees ! Estimated noise=545.602 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000800411 Jy ! Component: 100 - total flux cleaned = 0.000841453 Jy ! Component: 150 - total flux cleaned = 0.00224145 Jy ! Component: 200 - total flux cleaned = 0.00287817 Jy ! Total flux subtracted in 200 components = 0.00287817 Jy ! Clean residual min=-0.053372 max=0.097877 Jy/beam ! Clean residual mean=-0.000188 rms=0.020436 Jy/beam ! Combined flux in latest and established models = 1.11549 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 115 components and 1.11549 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.191016Jy sigma=0.002562 ! Fit after self-cal, rms=0.190991Jy sigma=0.002558 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (11.5, 2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0975693 Jy ! Component: 100 - total flux cleaned = 0.14728 Jy ! Component: 150 - total flux cleaned = 0.179068 Jy ! Component: 200 - total flux cleaned = 0.197785 Jy ! Total flux subtracted in 200 components = 0.197785 Jy ! Clean residual min=-0.031558 max=0.051561 Jy/beam ! Clean residual mean=0.000009 rms=0.010584 Jy/beam ! Combined flux in latest and established models = 1.31328 Jy ! Performing phase self-cal ! Adding 71 model components to the UV plane model. ! The established model now contains 182 components and 1.31328 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153346Jy sigma=0.001627 ! Fit after self-cal, rms=0.150050Jy sigma=0.001561 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150050Jy sigma=0.001561 ! Fit after self-cal, rms=0.163595Jy sigma=0.001473 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.479 mas, bmaj=11.36 mas, bpa=-24.33 degrees ! Estimated noise=556.691 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0294844 Jy ! Component: 100 - total flux cleaned = 0.0378045 Jy ! Component: 150 - total flux cleaned = 0.0407992 Jy ! Component: 200 - total flux cleaned = 0.0423289 Jy ! Total flux subtracted in 200 components = 0.0423289 Jy ! Clean residual min=-0.022634 max=0.035668 Jy/beam ! Clean residual mean=-0.000080 rms=0.006982 Jy/beam ! Combined flux in latest and established models = 1.35561 Jy selfcal ! Performing phase self-cal ! Adding 58 model components to the UV plane model. ! The established model now contains 228 components and 1.35561 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156429Jy sigma=0.001321 ! Fit after self-cal, rms=0.155995Jy sigma=0.001308 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-8, -1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0273908 Jy ! Component: 100 - total flux cleaned = 0.0395082 Jy ! Component: 150 - total flux cleaned = 0.0455925 Jy ! Component: 200 - total flux cleaned = 0.0493824 Jy ! Total flux subtracted in 200 components = 0.0493824 Jy ! Clean residual min=-0.017681 max=0.023080 Jy/beam ! Clean residual mean=-0.000032 rms=0.005163 Jy/beam ! Combined flux in latest and established models = 1.40499 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 258 components and 1.40499 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149584Jy sigma=0.001189 ! Fit after self-cal, rms=0.149490Jy sigma=0.001184 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149490Jy sigma=0.001184 ! Fit after self-cal, rms=0.149325Jy sigma=0.001173 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.92 mas, bmaj=14.32 mas, bpa=-15.15 degrees ! Estimated noise=563.833 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0117599 Jy ! Component: 100 - total flux cleaned = 0.0141181 Jy ! Component: 150 - total flux cleaned = 0.0164672 Jy ! Component: 200 - total flux cleaned = 0.0178603 Jy ! Total flux subtracted in 200 components = 0.0178603 Jy ! Clean residual min=-0.020182 max=0.023037 Jy/beam ! Clean residual mean=-0.000063 rms=0.006065 Jy/beam ! Combined flux in latest and established models = 1.42285 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 280 components and 1.42285 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147888Jy sigma=0.001142 ! Fit after self-cal, rms=0.147702Jy sigma=0.001140 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00118642 Jy ! Component: 100 - total flux cleaned = 0.00115916 Jy ! Component: 150 - total flux cleaned = 0.00115887 Jy ! Component: 200 - total flux cleaned = 0.00116832 Jy ! Total flux subtracted in 200 components = 0.00116832 Jy ! Clean residual min=-0.018992 max=0.021570 Jy/beam ! Clean residual mean=-0.000061 rms=0.005704 Jy/beam ! Combined flux in latest and established models = 1.42402 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 296 components and 1.42402 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146797Jy sigma=0.001127 ! Fit after self-cal, rms=0.146667Jy sigma=0.001126 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.517 mas, bmaj=11.39 mas, bpa=-24.29 degrees ! Estimated noise=559.143 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.517 x 11.39 at -24.29 degrees (North through East) ! Clean map min=-0.014964 max=0.45901 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.68 mas, bmaj=10.01 mas, bpa=-24.36 degrees ! Estimated noise=1155.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.377804 Jy ! Component: 100 - total flux cleaned = 0.584009 Jy ! Component: 150 - total flux cleaned = 0.713412 Jy ! Component: 200 - total flux cleaned = 0.806687 Jy ! Total flux subtracted in 200 components = 0.806687 Jy ! Clean residual min=-0.050657 max=0.055099 Jy/beam ! Clean residual mean=-0.000341 rms=0.016788 Jy/beam ! Combined flux in latest and established models = 0.806686 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 64 model components to the UV plane model. ! The established model now contains 64 components and 0.806686 Jy ! Inverting map and beam ! Estimated beam: bmin=3.517 mas, bmaj=11.39 mas, bpa=-24.29 degrees ! Estimated noise=559.143 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.129382 Jy ! Component: 100 - total flux cleaned = 0.224425 Jy ! Component: 150 - total flux cleaned = 0.297315 Jy ! Component: 200 - total flux cleaned = 0.354161 Jy ! Total flux subtracted in 200 components = 0.354161 Jy ! Clean residual min=-0.038620 max=0.042465 Jy/beam ! Clean residual mean=-0.000232 rms=0.013089 Jy/beam ! Combined flux in latest and established models = 1.16085 Jy ! Adding 70 model components to the UV plane model. ! The established model now contains 122 components and 1.16085 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.92 mas, bmaj=14.32 mas, bpa=-15.15 degrees ! Estimated noise=563.833 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0704257 Jy ! Component: 100 - total flux cleaned = 0.116896 Jy ! Component: 150 - total flux cleaned = 0.151131 Jy ! Component: 200 - total flux cleaned = 0.177152 Jy ! Total flux subtracted in 200 components = 0.177152 Jy ! Clean residual min=-0.033332 max=0.025260 Jy/beam ! Clean residual mean=-0.000175 rms=0.009206 Jy/beam ! Combined flux in latest and established models = 1.338 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0201243 Jy ! Component: 100 - total flux cleaned = 0.0364097 Jy ! Component: 150 - total flux cleaned = 0.0497988 Jy ! Component: 200 - total flux cleaned = 0.0608219 Jy ! Total flux subtracted in 200 components = 0.0608219 Jy ! Clean residual min=-0.025716 max=0.020707 Jy/beam ! Clean residual mean=-0.000097 rms=0.006451 Jy/beam ! Combined flux in latest and established models = 1.39882 Jy ! Adding 108 model components to the UV plane model. ! The established model now contains 212 components and 1.39882 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.517 mas, bmaj=11.39 mas, bpa=-24.29 degrees ! Estimated noise=559.143 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0107599 Jy ! Component: 100 - total flux cleaned = 0.013908 Jy ! Component: 150 - total flux cleaned = 0.0166921 Jy ! Component: 200 - total flux cleaned = 0.018797 Jy ! Total flux subtracted in 200 components = 0.018797 Jy ! Clean residual min=-0.017485 max=0.018442 Jy/beam ! Clean residual mean=-0.000038 rms=0.004359 Jy/beam ! Combined flux in latest and established models = 1.41762 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 238 components and 1.41762 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.144627Jy sigma=0.001137 ! Fit after self-cal, rms=0.141407Jy sigma=0.001121 wmodel J2344+8226_S_2014_01_04_pus_map.mod ! Writing 238 model components to file: J2344+8226_S_2014_01_04_pus_map.mod wobs J2344+8226_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J2344+8226_S_2014_01_04_pus_uvs.fits wwins J2344+8226_S_2014_01_04_pus_map.win ! wwins: Wrote 3 windows to J2344+8226_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00484819 Jy ! Component: 100 - total flux cleaned = 0.0095498 Jy ! Component: 150 - total flux cleaned = 0.01427 Jy ! Component: 200 - total flux cleaned = 0.0182181 Jy ! Component: 250 - total flux cleaned = 0.0215026 Jy ! Component: 300 - total flux cleaned = 0.0239943 Jy ! Component: 350 - total flux cleaned = 0.0267703 Jy ! Component: 400 - total flux cleaned = 0.0286706 Jy ! Component: 450 - total flux cleaned = 0.0306729 Jy ! Component: 500 - total flux cleaned = 0.0324207 Jy ! Component: 550 - total flux cleaned = 0.0334311 Jy ! Component: 600 - total flux cleaned = 0.0344078 Jy ! Component: 650 - total flux cleaned = 0.0351962 Jy ! Component: 700 - total flux cleaned = 0.035958 Jy ! Component: 750 - total flux cleaned = 0.0366951 Jy ! Component: 800 - total flux cleaned = 0.0371209 Jy ! Component: 850 - total flux cleaned = 0.0379539 Jy ! Component: 900 - total flux cleaned = 0.0383606 Jy ! Component: 950 - total flux cleaned = 0.0394086 Jy ! Component: 1000 - total flux cleaned = 0.0400458 Jy ! Component: 1050 - total flux cleaned = 0.0402931 Jy ! Component: 1100 - total flux cleaned = 0.0407754 Jy ! Component: 1150 - total flux cleaned = 0.0407755 Jy ! Component: 1200 - total flux cleaned = 0.0412359 Jy ! Component: 1250 - total flux cleaned = 0.0412356 Jy ! Component: 1300 - total flux cleaned = 0.0416774 Jy ! Component: 1350 - total flux cleaned = 0.0413535 Jy ! Component: 1400 - total flux cleaned = 0.0410381 Jy ! Component: 1450 - total flux cleaned = 0.0409312 Jy ! Component: 1500 - total flux cleaned = 0.0406246 Jy ! Component: 1550 - total flux cleaned = 0.0403246 Jy ! Component: 1600 - total flux cleaned = 0.0401286 Jy ! Component: 1650 - total flux cleaned = 0.0398424 Jy ! Component: 1700 - total flux cleaned = 0.0398434 Jy ! Component: 1750 - total flux cleaned = 0.039843 Jy ! Component: 1800 - total flux cleaned = 0.0393904 Jy ! Component: 1850 - total flux cleaned = 0.0398327 Jy ! Component: 1900 - total flux cleaned = 0.0393982 Jy ! Component: 1950 - total flux cleaned = 0.0395698 Jy ! Component: 2000 - total flux cleaned = 0.039403 Jy ! Component: 2050 - total flux cleaned = 0.0396508 Jy ! Component: 2100 - total flux cleaned = 0.0397319 Jy ! Component: 2150 - total flux cleaned = 0.0396512 Jy ! Component: 2200 - total flux cleaned = 0.039337 Jy ! Component: 2250 - total flux cleaned = 0.0393367 Jy ! Component: 2300 - total flux cleaned = 0.0391839 Jy ! Component: 2350 - total flux cleaned = 0.039109 Jy ! Component: 2400 - total flux cleaned = 0.03874 Jy ! Component: 2450 - total flux cleaned = 0.0388126 Jy ! Component: 2500 - total flux cleaned = 0.0387394 Jy ! Component: 2550 - total flux cleaned = 0.0387394 Jy ! Component: 2600 - total flux cleaned = 0.0388089 Jy ! Component: 2650 - total flux cleaned = 0.0387383 Jy ! Component: 2700 - total flux cleaned = 0.0386018 Jy ! Component: 2750 - total flux cleaned = 0.0386705 Jy ! Component: 2800 - total flux cleaned = 0.0388057 Jy ! Component: 2850 - total flux cleaned = 0.0391368 Jy ! Component: 2900 - total flux cleaned = 0.0392016 Jy ! Component: 2950 - total flux cleaned = 0.0392662 Jy ! Component: 3000 - total flux cleaned = 0.0393303 Jy ! Component: 3050 - total flux cleaned = 0.0392043 Jy ! Component: 3100 - total flux cleaned = 0.039394 Jy ! Component: 3150 - total flux cleaned = 0.0394569 Jy ! Component: 3200 - total flux cleaned = 0.0396431 Jy ! Component: 3250 - total flux cleaned = 0.0398887 Jy ! Component: 3300 - total flux cleaned = 0.0399494 Jy ! Component: 3350 - total flux cleaned = 0.040252 Jy ! Component: 3400 - total flux cleaned = 0.0405514 Jy ! Component: 3450 - total flux cleaned = 0.0406694 Jy ! Component: 3500 - total flux cleaned = 0.0407868 Jy ! Component: 3550 - total flux cleaned = 0.0407287 Jy ! Component: 3600 - total flux cleaned = 0.0411362 Jy ! Component: 3650 - total flux cleaned = 0.0412517 Jy ! Component: 3700 - total flux cleaned = 0.0413667 Jy ! Component: 3750 - total flux cleaned = 0.0415946 Jy ! Component: 3800 - total flux cleaned = 0.0418208 Jy ! Component: 3850 - total flux cleaned = 0.0420453 Jy ! Component: 3900 - total flux cleaned = 0.0422121 Jy ! Component: 3950 - total flux cleaned = 0.0423778 Jy ! Component: 4000 - total flux cleaned = 0.0424879 Jy ! Component: 4050 - total flux cleaned = 0.0426524 Jy ! Total flux subtracted in 4096 components = 0.0427071 Jy ! Clean residual min=-0.002967 max=0.002984 Jy/beam ! Clean residual mean=-0.000017 rms=0.001019 Jy/beam ! Combined flux in latest and established models = 1.46032 Jy keep ! Adding 306 model components to the UV plane model. ! The established model now contains 544 components and 1.46032 Jy ![Exited script file: muppet] wmap "J2344+8226_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.517 x 11.39 at -24.29 degrees (North through East) ! Clean map min=-0.0088994 max=0.46042 Jy/beam ! Writing clean map to FITS file: J2344+8226_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.460415 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000962837 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.62737 0.62737 1.25474 2.50948 5.01896 10.0379 20.0759 40.1517 80.3034 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0028 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.46 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.517 x 11.39 at -24.29 degrees (North through East) ! Clean map min=-0.0088994 max=0.46042 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2344+8226_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:38:30 2017