! Started logfile: J2343+1543_S_2014_06_09_pus_uvs.log on Wed Nov 16 20:06:45 2016 obs J2343+1543_S_2014_06_09_pus_uva.fits ! Reading UV FITS file: J2343+1543_S_2014_06_09_pus_uva.fits ! AN table 1: 104 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.609615 visibilities/baseline/integration-bin. ! Found source: J2343+1543 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 11412 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2343+1543_S_2014_06_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 218 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 218 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 218 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 218 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.906592Jy sigma=0.011057 ! Fit after self-cal, rms=0.891955Jy sigma=0.010887 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.759 mas, bmaj=8.323 mas, bpa=13.29 degrees ! Estimated noise=788.511 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.085402 Jy ! Component: 100 - total flux cleaned = 0.104025 Jy ! Total flux subtracted in 100 components = 0.104025 Jy ! Clean residual min=-0.003328 max=0.005195 Jy/beam ! Clean residual mean=0.000000 rms=0.000907 Jy/beam ! Combined flux in latest and established models = 0.104025 Jy ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 0.104025 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070944Jy sigma=0.000790 ! Fit after self-cal, rms=0.070939Jy sigma=0.000790 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.612 mas, bmaj=9.336 mas, bpa=8.859 degrees ! Estimated noise=553.475 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0052896 Jy ! Component: 100 - total flux cleaned = 0.00736675 Jy ! Component: 150 - total flux cleaned = 0.00845344 Jy ! Component: 200 - total flux cleaned = 0.00873437 Jy ! Total flux subtracted in 200 components = 0.00873437 Jy ! Clean residual min=-0.002592 max=0.002347 Jy/beam ! Clean residual mean=0.000016 rms=0.000622 Jy/beam ! Combined flux in latest and established models = 0.11276 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 39 components and 0.11276 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070524Jy sigma=0.000786 ! Fit after self-cal, rms=0.070543Jy sigma=0.000786 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.87 HN 0.97 KP 1.03 ! LA 1.18 MK 1.00* NL 0.97 OV 0.98 ! PT 1.02 SC 0.97 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.01 KP 1.00 ! LA 1.13 MK 1.00* NL 1.10 OV 0.98 ! PT 0.98 SC 1.03 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.15 HN 1.00 KP 0.91 ! LA 0.91 MK 1.00* NL 1.00 OV 0.94 ! PT 0.99 SC 1.00 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.01 KP 0.90 ! LA 0.88 MK 1.00* NL 1.04 OV 1.02 ! PT 1.00 SC 1.01 ! ! ! Fit before self-cal, rms=0.070543Jy sigma=0.000786 ! Fit after self-cal, rms=0.068817Jy sigma=0.000776 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.599 mas, bmaj=9.341 mas, bpa=8.798 degrees ! Estimated noise=552.407 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.46711e-05 Jy ! Component: 100 - total flux cleaned = -9.9856e-05 Jy ! Component: 150 - total flux cleaned = -0.000100104 Jy ! Component: 200 - total flux cleaned = -0.000110855 Jy ! Total flux subtracted in 200 components = -0.000110855 Jy ! Clean residual min=-0.001944 max=0.001783 Jy/beam ! Clean residual mean=0.000011 rms=0.000489 Jy/beam ! Combined flux in latest and established models = 0.112649 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 52 components and 0.112649 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068810Jy sigma=0.000776 ! Fit after self-cal, rms=0.068815Jy sigma=0.000775 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068815Jy sigma=0.000775 ! Fit after self-cal, rms=0.068666Jy sigma=0.000774 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.598 mas, bmaj=9.337 mas, bpa=8.928 degrees ! Estimated noise=552.476 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.01438e-05 Jy ! Component: 100 - total flux cleaned = -0.00014285 Jy ! Component: 150 - total flux cleaned = -0.000205262 Jy ! Component: 200 - total flux cleaned = -0.000251177 Jy ! Total flux subtracted in 200 components = -0.000251177 Jy ! Clean residual min=-0.001865 max=0.001596 Jy/beam ! Clean residual mean=0.000005 rms=0.000435 Jy/beam ! Combined flux in latest and established models = 0.112398 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 54 components and 0.112398 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068663Jy sigma=0.000774 ! Fit after self-cal, rms=0.068667Jy sigma=0.000774 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.29942e-06 Jy ! Component: 100 - total flux cleaned = -4.08332e-05 Jy ! Component: 150 - total flux cleaned = -6.0892e-05 Jy ! Component: 200 - total flux cleaned = -7.33969e-05 Jy ! Total flux subtracted in 200 components = -7.33969e-05 Jy ! Clean residual min=-0.001863 max=0.001588 Jy/beam ! Clean residual mean=0.000005 rms=0.000434 Jy/beam ! Combined flux in latest and established models = 0.112324 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 60 components and 0.112324 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068665Jy sigma=0.000774 ! Fit after self-cal, rms=0.068665Jy sigma=0.000774 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068665Jy sigma=0.000774 ! Fit after self-cal, rms=0.068638Jy sigma=0.000774 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.594 mas, bmaj=9.34 mas, bpa=9.019 degrees ! Estimated noise=552.318 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.9202e-05 Jy ! Component: 100 - total flux cleaned = -8.86863e-05 Jy ! Component: 150 - total flux cleaned = -0.000116387 Jy ! Component: 200 - total flux cleaned = -0.00014112 Jy ! Total flux subtracted in 200 components = -0.00014112 Jy ! Clean residual min=-0.001848 max=0.001583 Jy/beam ! Clean residual mean=0.000005 rms=0.000433 Jy/beam ! Combined flux in latest and established models = 0.112183 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 63 components and 0.112183 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068636Jy sigma=0.000774 ! Fit after self-cal, rms=0.068637Jy sigma=0.000774 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.96203e-06 Jy ! Component: 100 - total flux cleaned = -2.81081e-05 Jy ! Component: 150 - total flux cleaned = -3.37085e-05 Jy ! Component: 200 - total flux cleaned = -3.90436e-05 Jy ! Total flux subtracted in 200 components = -3.90436e-05 Jy ! Clean residual min=-0.001852 max=0.001579 Jy/beam ! Clean residual mean=0.000005 rms=0.000433 Jy/beam ! Combined flux in latest and established models = 0.112144 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 66 components and 0.112144 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068636Jy sigma=0.000774 ! Fit after self-cal, rms=0.068636Jy sigma=0.000774 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068636Jy sigma=0.000774 ! Fit after self-cal, rms=0.068604Jy sigma=0.000774 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.092 mas, bmaj=13.24 mas, bpa=-11.06 degrees ! Estimated noise=616.843 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000109168 Jy ! Component: 100 - total flux cleaned = -0.000119955 Jy ! Component: 150 - total flux cleaned = -0.000119932 Jy ! Component: 200 - total flux cleaned = -0.000119789 Jy ! Total flux subtracted in 200 components = -0.000119789 Jy ! Clean residual min=-0.002105 max=0.001798 Jy/beam ! Clean residual mean=0.000008 rms=0.000524 Jy/beam ! Combined flux in latest and established models = 0.112024 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 77 components and 0.112024 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068604Jy sigma=0.000774 ! Fit after self-cal, rms=0.068603Jy sigma=0.000774 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.5903e-05 Jy ! Component: 100 - total flux cleaned = -4.04233e-05 Jy ! Component: 150 - total flux cleaned = -4.39774e-05 Jy ! Component: 200 - total flux cleaned = -4.39169e-05 Jy ! Total flux subtracted in 200 components = -4.39169e-05 Jy ! Clean residual min=-0.002095 max=0.001804 Jy/beam ! Clean residual mean=0.000008 rms=0.000523 Jy/beam ! Combined flux in latest and established models = 0.11198 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 81 components and 0.11198 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068603Jy sigma=0.000774 ! Fit after self-cal, rms=0.068602Jy sigma=0.000774 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.59 mas, bmaj=9.341 mas, bpa=9.092 degrees ! Estimated noise=552.195 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.59 x 9.341 at 9.092 degrees (North through East) ! Clean map min=-0.0018159 max=0.1096 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.747 mas, bmaj=8.329 mas, bpa=13.38 degrees ! Estimated noise=784.807 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0849487 Jy ! Component: 100 - total flux cleaned = 0.103481 Jy ! Component: 150 - total flux cleaned = 0.10862 Jy ! Component: 200 - total flux cleaned = 0.110633 Jy ! Total flux subtracted in 200 components = 0.110633 Jy ! Clean residual min=-0.002519 max=0.002201 Jy/beam ! Clean residual mean=0.000002 rms=0.000558 Jy/beam ! Combined flux in latest and established models = 0.110633 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.110633 Jy ! Inverting map and beam ! Estimated beam: bmin=4.59 mas, bmaj=9.341 mas, bpa=9.092 degrees ! Estimated noise=552.195 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00108421 Jy ! Component: 100 - total flux cleaned = 0.00132997 Jy ! Component: 150 - total flux cleaned = 0.00141115 Jy ! Component: 200 - total flux cleaned = 0.00144981 Jy ! Total flux subtracted in 200 components = 0.00144981 Jy ! Clean residual min=-0.001852 max=0.001624 Jy/beam ! Clean residual mean=0.000005 rms=0.000436 Jy/beam ! Combined flux in latest and established models = 0.112083 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 32 components and 0.112083 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.092 mas, bmaj=13.24 mas, bpa=-11.06 degrees ! Estimated noise=616.843 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.78226e-05 Jy ! Component: 100 - total flux cleaned = 5.26587e-05 Jy ! Component: 150 - total flux cleaned = 4.28166e-05 Jy ! Component: 200 - total flux cleaned = 3.34904e-05 Jy ! Total flux subtracted in 200 components = 3.34904e-05 Jy ! Clean residual min=-0.002069 max=0.001818 Jy/beam ! Clean residual mean=0.000008 rms=0.000523 Jy/beam ! Combined flux in latest and established models = 0.112116 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.90966e-06 Jy ! Component: 100 - total flux cleaned = -1.73432e-05 Jy ! Component: 150 - total flux cleaned = -2.54559e-05 Jy ! Component: 200 - total flux cleaned = -3.31489e-05 Jy ! Total flux subtracted in 200 components = -3.31489e-05 Jy ! Clean residual min=-0.002068 max=0.001819 Jy/beam ! Clean residual mean=0.000008 rms=0.000523 Jy/beam ! Combined flux in latest and established models = 0.112083 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 41 components and 0.112083 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.59 mas, bmaj=9.341 mas, bpa=9.092 degrees ! Estimated noise=552.195 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.17065e-05 Jy ! Component: 100 - total flux cleaned = -2.16178e-05 Jy ! Component: 150 - total flux cleaned = -1.36835e-05 Jy ! Component: 200 - total flux cleaned = -1.38245e-05 Jy ! Total flux subtracted in 200 components = -1.38245e-05 Jy ! Clean residual min=-0.001856 max=0.001622 Jy/beam ! Clean residual mean=0.000005 rms=0.000434 Jy/beam ! Combined flux in latest and established models = 0.112069 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 51 components and 0.112069 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068608Jy sigma=0.000774 ! Fit after self-cal, rms=0.068607Jy sigma=0.000774 wmodel J2343+1543_S_2014_06_09_pus_map.mod ! Writing 51 model components to file: J2343+1543_S_2014_06_09_pus_map.mod wobs J2343+1543_S_2014_06_09_pus_uvs.fits ! Writing UV FITS file: J2343+1543_S_2014_06_09_pus_uvs.fits wwins J2343+1543_S_2014_06_09_pus_map.win ! wwins: Wrote 1 windows to J2343+1543_S_2014_06_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000575915 Jy ! Component: 100 - total flux cleaned = -0.000545894 Jy ! Component: 150 - total flux cleaned = -0.00057289 Jy ! Component: 200 - total flux cleaned = -0.00052256 Jy ! Component: 250 - total flux cleaned = -0.000376891 Jy ! Component: 300 - total flux cleaned = -0.000284482 Jy ! Component: 350 - total flux cleaned = -0.000216828 Jy ! Component: 400 - total flux cleaned = -6.45669e-05 Jy ! Component: 450 - total flux cleaned = 6.1384e-05 Jy ! Component: 500 - total flux cleaned = 8.19503e-05 Jy ! Component: 550 - total flux cleaned = 0.000141161 Jy ! Component: 600 - total flux cleaned = 0.000218217 Jy ! Component: 650 - total flux cleaned = 0.000293185 Jy ! Component: 700 - total flux cleaned = 0.000384888 Jy ! Component: 750 - total flux cleaned = 0.000492919 Jy ! Component: 800 - total flux cleaned = 0.000546047 Jy ! Component: 850 - total flux cleaned = 0.000667726 Jy ! Component: 900 - total flux cleaned = 0.000736412 Jy ! Component: 950 - total flux cleaned = 0.000887015 Jy ! Component: 1000 - total flux cleaned = 0.000968847 Jy ! Component: 1050 - total flux cleaned = 0.00101723 Jy ! Component: 1100 - total flux cleaned = 0.00108091 Jy ! Component: 1150 - total flux cleaned = 0.00112753 Jy ! Component: 1200 - total flux cleaned = 0.00118853 Jy ! Component: 1250 - total flux cleaned = 0.00121875 Jy ! Component: 1300 - total flux cleaned = 0.00130731 Jy ! Component: 1350 - total flux cleaned = 0.00136553 Jy ! Component: 1400 - total flux cleaned = 0.00145164 Jy ! Component: 1450 - total flux cleaned = 0.00150826 Jy ! Component: 1500 - total flux cleaned = 0.00157819 Jy ! Component: 1550 - total flux cleaned = 0.00161953 Jy ! Component: 1600 - total flux cleaned = 0.00167374 Jy ! Component: 1650 - total flux cleaned = 0.00172719 Jy ! Component: 1700 - total flux cleaned = 0.0017666 Jy ! Component: 1750 - total flux cleaned = 0.00180571 Jy ! Component: 1800 - total flux cleaned = 0.00186987 Jy ! Component: 1850 - total flux cleaned = 0.00189503 Jy ! Component: 1900 - total flux cleaned = 0.00197038 Jy ! Component: 1950 - total flux cleaned = 0.00203224 Jy ! Component: 2000 - total flux cleaned = 0.00208112 Jy ! Component: 2050 - total flux cleaned = 0.00212941 Jy ! Component: 2100 - total flux cleaned = 0.00218917 Jy ! Component: 2150 - total flux cleaned = 0.00221284 Jy ! Component: 2200 - total flux cleaned = 0.00228287 Jy ! Component: 2250 - total flux cleaned = 0.0023521 Jy ! Component: 2300 - total flux cleaned = 0.0023977 Jy ! Component: 2350 - total flux cleaned = 0.00246511 Jy ! Component: 2400 - total flux cleaned = 0.00250962 Jy ! Component: 2450 - total flux cleaned = 0.00255356 Jy ! Component: 2500 - total flux cleaned = 0.00257554 Jy ! Component: 2550 - total flux cleaned = 0.00264043 Jy ! Component: 2600 - total flux cleaned = 0.00266179 Jy ! Component: 2650 - total flux cleaned = 0.00270407 Jy ! Component: 2700 - total flux cleaned = 0.00275633 Jy ! Component: 2750 - total flux cleaned = 0.00277703 Jy ! Component: 2800 - total flux cleaned = 0.00281797 Jy ! Component: 2850 - total flux cleaned = 0.00282811 Jy ! Component: 2900 - total flux cleaned = 0.00287841 Jy ! Component: 2950 - total flux cleaned = 0.00288826 Jy ! Component: 3000 - total flux cleaned = 0.00293779 Jy ! Component: 3050 - total flux cleaned = 0.00296713 Jy ! Component: 3100 - total flux cleaned = 0.00302535 Jy ! Component: 3150 - total flux cleaned = 0.0030157 Jy ! Component: 3200 - total flux cleaned = 0.00302527 Jy ! Component: 3250 - total flux cleaned = 0.00305387 Jy ! Component: 3300 - total flux cleaned = 0.00308212 Jy ! Component: 3350 - total flux cleaned = 0.00311013 Jy ! Component: 3400 - total flux cleaned = 0.00312855 Jy ! Component: 3450 - total flux cleaned = 0.0031469 Jy ! Component: 3500 - total flux cleaned = 0.00315601 Jy ! Component: 3550 - total flux cleaned = 0.00314694 Jy ! Component: 3600 - total flux cleaned = 0.00316502 Jy ! Component: 3650 - total flux cleaned = 0.00318292 Jy ! Component: 3700 - total flux cleaned = 0.00320962 Jy ! Component: 3750 - total flux cleaned = 0.00323615 Jy ! Component: 3800 - total flux cleaned = 0.0032449 Jy ! Component: 3850 - total flux cleaned = 0.00322751 Jy ! Component: 3900 - total flux cleaned = 0.00323618 Jy ! Component: 3950 - total flux cleaned = 0.00323619 Jy ! Component: 4000 - total flux cleaned = 0.00325336 Jy ! Component: 4050 - total flux cleaned = 0.00326179 Jy ! Total flux subtracted in 4096 components = 0.00323646 Jy ! Clean residual min=-0.000593 max=0.000608 Jy/beam ! Clean residual mean=0.000002 rms=0.000153 Jy/beam ! Combined flux in latest and established models = 0.115306 Jy keep ! Adding 246 model components to the UV plane model. ! The established model now contains 297 components and 0.115306 Jy ![Exited script file: muppet] wmap "J2343+1543_S_2014_06_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.59 x 9.341 at 9.092 degrees (North through East) ! Clean map min=-0.0011664 max=0.10947 Jy/beam ! Writing clean map to FITS file: J2343+1543_S_2014_06_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.10947 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000149292 device "J2343+1543_S_2014_06_09_pus\_map.eps/VPS" ! Attempting to open device: 'J2343+1543_S_2014_06_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.409132 0.409132 0.818263 1.63653 3.27305 6.5461 13.0922 26.1844 52.3688 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.109 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.59 x 9.341 at 9.092 degrees (North through East) ! Clean map min=-0.0011664 max=0.10947 Jy/beam quit ! Quitting program ! Log file J2343+1543_S_2014_06_09_pus_uvs.log closed on Wed Nov 16 20:06:49 2016