! Started logfile: J2342-2223_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:38:20 2017 obs J2342-2223_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J2342-2223_S_2014_01_04_pus_uva.fits ! AN table 1: 118 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.583333 visibilities/baseline/integration-bin. ! Found source: J2342-2223 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 9912 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2342-2223_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 236 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 236 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 236 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 236 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.883766Jy sigma=0.010477 ! Fit after self-cal, rms=0.851563Jy sigma=0.010085 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.506 mas, bmaj=5.714 mas, bpa=2.968 degrees ! Estimated noise=951.76 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.114549 Jy ! Component: 100 - total flux cleaned = 0.139529 Jy ! Total flux subtracted in 100 components = 0.139529 Jy ! Clean residual min=-0.006139 max=0.008017 Jy/beam ! Clean residual mean=-0.000029 rms=0.001681 Jy/beam ! Combined flux in latest and established models = 0.139529 Jy ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 0.139529 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090744Jy sigma=0.000941 ! Fit after self-cal, rms=0.090736Jy sigma=0.000941 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.976 mas, bmaj=6.672 mas, bpa=1.297 degrees ! Estimated noise=642.549 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00898766 Jy ! Component: 100 - total flux cleaned = 0.0121568 Jy ! Component: 150 - total flux cleaned = 0.0130774 Jy ! Component: 200 - total flux cleaned = 0.0133424 Jy ! Total flux subtracted in 200 components = 0.0133424 Jy ! Clean residual min=-0.005033 max=0.006259 Jy/beam ! Clean residual mean=-0.000035 rms=0.001334 Jy/beam ! Combined flux in latest and established models = 0.152871 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.152871 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089493Jy sigma=0.000941 ! Fit after self-cal, rms=0.089541Jy sigma=0.000941 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.00* KP 1.00* LA 1.01 ! MK 1.01 NL 0.94 OV 0.93 PT 1.01 ! SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.29 FD 1.00* KP 1.00* LA 0.97 ! MK 0.96 NL 1.01 OV 0.99 PT 0.96 ! SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.00* KP 1.00* LA 0.82 ! MK 1.02 NL 0.95 OV 0.93 PT 0.96 ! SC 0.96 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.23 FD 1.00* KP 1.00* LA 0.89 ! MK 1.03 NL 1.09 OV 1.02 PT 0.98 ! SC 0.94 ! ! ! Fit before self-cal, rms=0.089541Jy sigma=0.000941 ! Fit after self-cal, rms=0.085883Jy sigma=0.000908 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.96 mas, bmaj=6.706 mas, bpa=1.467 degrees ! Estimated noise=645.369 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000848014 Jy ! Component: 100 - total flux cleaned = 0.00114385 Jy ! Component: 150 - total flux cleaned = 0.00134444 Jy ! Component: 200 - total flux cleaned = 0.0014144 Jy ! Total flux subtracted in 200 components = 0.0014144 Jy ! Clean residual min=-0.002955 max=0.002303 Jy/beam ! Clean residual mean=-0.000000 rms=0.000626 Jy/beam ! Combined flux in latest and established models = 0.154285 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 21 components and 0.154285 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085808Jy sigma=0.000908 ! Fit after self-cal, rms=0.085461Jy sigma=0.000907 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085461Jy sigma=0.000907 ! Fit after self-cal, rms=0.086026Jy sigma=0.000900 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.957 mas, bmaj=6.693 mas, bpa=1.321 degrees ! Estimated noise=649.011 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00104935 Jy ! Component: 100 - total flux cleaned = 0.00119445 Jy ! Component: 150 - total flux cleaned = 0.00131067 Jy ! Component: 200 - total flux cleaned = 0.0013697 Jy ! Total flux subtracted in 200 components = 0.0013697 Jy ! Clean residual min=-0.002295 max=0.002217 Jy/beam ! Clean residual mean=0.000002 rms=0.000559 Jy/beam ! Combined flux in latest and established models = 0.155655 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 30 components and 0.155655 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085992Jy sigma=0.000900 ! Fit after self-cal, rms=0.086000Jy sigma=0.000900 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.22743e-06 Jy ! Component: 100 - total flux cleaned = 5.51932e-05 Jy ! Component: 150 - total flux cleaned = 6.92681e-05 Jy ! Component: 200 - total flux cleaned = 8.25633e-05 Jy ! Total flux subtracted in 200 components = 8.25633e-05 Jy ! Clean residual min=-0.002311 max=0.002212 Jy/beam ! Clean residual mean=0.000002 rms=0.000555 Jy/beam ! Combined flux in latest and established models = 0.155738 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 32 components and 0.155738 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085992Jy sigma=0.000900 ! Fit after self-cal, rms=0.085995Jy sigma=0.000900 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085995Jy sigma=0.000900 ! Fit after self-cal, rms=0.086681Jy sigma=0.000900 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.956 mas, bmaj=6.695 mas, bpa=1.293 degrees ! Estimated noise=653.172 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000851823 Jy ! Component: 100 - total flux cleaned = 0.00101095 Jy ! Component: 150 - total flux cleaned = 0.00105162 Jy ! Component: 200 - total flux cleaned = 0.00107564 Jy ! Total flux subtracted in 200 components = 0.00107564 Jy ! Clean residual min=-0.002266 max=0.002235 Jy/beam ! Clean residual mean=0.000002 rms=0.000570 Jy/beam ! Combined flux in latest and established models = 0.156813 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 36 components and 0.156813 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086664Jy sigma=0.000900 ! Fit after self-cal, rms=0.086676Jy sigma=0.000900 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.52373e-05 Jy ! Component: 100 - total flux cleaned = 6.51702e-05 Jy ! Component: 150 - total flux cleaned = 8.34342e-05 Jy ! Component: 200 - total flux cleaned = 0.000100105 Jy ! Total flux subtracted in 200 components = 0.000100105 Jy ! Clean residual min=-0.002275 max=0.002238 Jy/beam ! Clean residual mean=0.000002 rms=0.000570 Jy/beam ! Combined flux in latest and established models = 0.156913 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 38 components and 0.156913 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086672Jy sigma=0.000900 ! Fit after self-cal, rms=0.086674Jy sigma=0.000900 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086674Jy sigma=0.000900 ! Fit after self-cal, rms=0.087192Jy sigma=0.000899 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.56 mas, bmaj=17.34 mas, bpa=7.096 degrees ! Estimated noise=807.036 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000720628 Jy ! Component: 100 - total flux cleaned = 0.000721171 Jy ! Component: 150 - total flux cleaned = 0.000676113 Jy ! Component: 200 - total flux cleaned = 0.000644636 Jy ! Total flux subtracted in 200 components = 0.000644636 Jy ! Clean residual min=-0.002763 max=0.002311 Jy/beam ! Clean residual mean=0.000003 rms=0.000799 Jy/beam ! Combined flux in latest and established models = 0.157558 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 40 components and 0.157558 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087183Jy sigma=0.000900 ! Fit after self-cal, rms=0.087182Jy sigma=0.000900 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.40895e-05 Jy ! Component: 100 - total flux cleaned = -3.28822e-05 Jy ! Component: 150 - total flux cleaned = -7.00602e-05 Jy ! Component: 200 - total flux cleaned = -8.74504e-05 Jy ! Total flux subtracted in 200 components = -8.74504e-05 Jy ! Clean residual min=-0.002794 max=0.002298 Jy/beam ! Clean residual mean=0.000002 rms=0.000794 Jy/beam ! Combined flux in latest and established models = 0.157471 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 43 components and 0.157471 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087184Jy sigma=0.000900 ! Fit after self-cal, rms=0.087184Jy sigma=0.000900 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.954 mas, bmaj=6.694 mas, bpa=1.274 degrees ! Estimated noise=657.107 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.954 x 6.694 at 1.274 degrees (North through East) ! Clean map min=-0.0022674 max=0.15043 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.481 mas, bmaj=5.698 mas, bpa=2.816 degrees ! Estimated noise=983.494 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.118409 Jy ! Component: 100 - total flux cleaned = 0.144365 Jy ! Component: 150 - total flux cleaned = 0.15218 Jy ! Component: 200 - total flux cleaned = 0.15551 Jy ! Total flux subtracted in 200 components = 0.15551 Jy ! Clean residual min=-0.004005 max=0.003765 Jy/beam ! Clean residual mean=-0.000004 rms=0.000933 Jy/beam ! Combined flux in latest and established models = 0.15551 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.15551 Jy ! Inverting map and beam ! Estimated beam: bmin=2.954 mas, bmaj=6.694 mas, bpa=1.274 degrees ! Estimated noise=657.107 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00107961 Jy ! Component: 100 - total flux cleaned = 0.00131794 Jy ! Component: 150 - total flux cleaned = 0.00158355 Jy ! Component: 200 - total flux cleaned = 0.00179234 Jy ! Total flux subtracted in 200 components = 0.00179234 Jy ! Clean residual min=-0.002304 max=0.002309 Jy/beam ! Clean residual mean=0.000000 rms=0.000580 Jy/beam ! Combined flux in latest and established models = 0.157302 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 23 components and 0.157302 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.56 mas, bmaj=17.34 mas, bpa=7.096 degrees ! Estimated noise=807.036 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.39782e-06 Jy ! Component: 100 - total flux cleaned = 9.24968e-06 Jy ! Component: 150 - total flux cleaned = 1.10126e-05 Jy ! Component: 200 - total flux cleaned = -1.89567e-05 Jy ! Total flux subtracted in 200 components = -1.89567e-05 Jy ! Clean residual min=-0.002736 max=0.002278 Jy/beam ! Clean residual mean=0.000002 rms=0.000791 Jy/beam ! Combined flux in latest and established models = 0.157283 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.85999e-05 Jy ! Component: 100 - total flux cleaned = -5.50979e-05 Jy ! Component: 150 - total flux cleaned = -7.98923e-05 Jy ! Component: 200 - total flux cleaned = -0.000103348 Jy ! Total flux subtracted in 200 components = -0.000103348 Jy ! Clean residual min=-0.002749 max=0.002264 Jy/beam ! Clean residual mean=0.000001 rms=0.000785 Jy/beam ! Combined flux in latest and established models = 0.15718 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 31 components and 0.15718 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.954 mas, bmaj=6.694 mas, bpa=1.274 degrees ! Estimated noise=657.107 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00029609 Jy ! Component: 100 - total flux cleaned = 0.000268652 Jy ! Component: 150 - total flux cleaned = 0.00028855 Jy ! Component: 200 - total flux cleaned = 0.000326691 Jy ! Total flux subtracted in 200 components = 0.000326691 Jy ! Clean residual min=-0.002349 max=0.002260 Jy/beam ! Clean residual mean=0.000001 rms=0.000573 Jy/beam ! Combined flux in latest and established models = 0.157507 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 38 components and 0.157507 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087197Jy sigma=0.000900 ! Fit after self-cal, rms=0.087186Jy sigma=0.000900 wmodel J2342-2223_S_2014_01_04_pus_map.mod ! Writing 38 model components to file: J2342-2223_S_2014_01_04_pus_map.mod wobs J2342-2223_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J2342-2223_S_2014_01_04_pus_uvs.fits wwins J2342-2223_S_2014_01_04_pus_map.win ! wwins: Wrote 1 windows to J2342-2223_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000302815 Jy ! Component: 100 - total flux cleaned = -0.000648431 Jy ! Component: 150 - total flux cleaned = -0.000932375 Jy ! Component: 200 - total flux cleaned = -0.00116637 Jy ! Component: 250 - total flux cleaned = -0.00135736 Jy ! Component: 300 - total flux cleaned = -0.00159873 Jy ! Component: 350 - total flux cleaned = -0.00165709 Jy ! Component: 400 - total flux cleaned = -0.00182499 Jy ! Component: 450 - total flux cleaned = -0.00204038 Jy ! Component: 500 - total flux cleaned = -0.00214394 Jy ! Component: 550 - total flux cleaned = -0.00221978 Jy ! Component: 600 - total flux cleaned = -0.00229385 Jy ! Component: 650 - total flux cleaned = -0.00231767 Jy ! Component: 700 - total flux cleaned = -0.00227159 Jy ! Component: 750 - total flux cleaned = -0.00233984 Jy ! Component: 800 - total flux cleaned = -0.00240588 Jy ! Component: 850 - total flux cleaned = -0.00249234 Jy ! Component: 900 - total flux cleaned = -0.00251313 Jy ! Component: 950 - total flux cleaned = -0.00253402 Jy ! Component: 1000 - total flux cleaned = -0.00263487 Jy ! Component: 1050 - total flux cleaned = -0.00269395 Jy ! Component: 1100 - total flux cleaned = -0.00273268 Jy ! Component: 1150 - total flux cleaned = -0.00275144 Jy ! Component: 1200 - total flux cleaned = -0.00277004 Jy ! Component: 1250 - total flux cleaned = -0.00271463 Jy ! Component: 1300 - total flux cleaned = -0.0026786 Jy ! Component: 1350 - total flux cleaned = -0.00271415 Jy ! Component: 1400 - total flux cleaned = -0.00264367 Jy ! Component: 1450 - total flux cleaned = -0.00262633 Jy ! Component: 1500 - total flux cleaned = -0.0026437 Jy ! Component: 1550 - total flux cleaned = -0.00267741 Jy ! Component: 1600 - total flux cleaned = -0.00269409 Jy ! Component: 1650 - total flux cleaned = -0.00271095 Jy ! Component: 1700 - total flux cleaned = -0.00275924 Jy ! Component: 1750 - total flux cleaned = -0.00279092 Jy ! Component: 1800 - total flux cleaned = -0.0028065 Jy ! Component: 1850 - total flux cleaned = -0.00282221 Jy ! Component: 1900 - total flux cleaned = -0.00286815 Jy ! Component: 1950 - total flux cleaned = -0.00288322 Jy ! Component: 2000 - total flux cleaned = -0.00289837 Jy ! Component: 2050 - total flux cleaned = -0.00294272 Jy ! Component: 2100 - total flux cleaned = -0.00298657 Jy ! Component: 2150 - total flux cleaned = -0.00300102 Jy ! Component: 2200 - total flux cleaned = -0.00298649 Jy ! Component: 2250 - total flux cleaned = -0.00298644 Jy ! Component: 2300 - total flux cleaned = -0.0029721 Jy ! Component: 2350 - total flux cleaned = -0.00293018 Jy ! Component: 2400 - total flux cleaned = -0.00284768 Jy ! Component: 2450 - total flux cleaned = -0.00280693 Jy ! Component: 2500 - total flux cleaned = -0.00282073 Jy ! Component: 2550 - total flux cleaned = -0.00283398 Jy ! Component: 2600 - total flux cleaned = -0.00279407 Jy ! Component: 2650 - total flux cleaned = -0.00279405 Jy ! Component: 2700 - total flux cleaned = -0.00279393 Jy ! Component: 2750 - total flux cleaned = -0.00275489 Jy ! Component: 2800 - total flux cleaned = -0.00278074 Jy ! Component: 2850 - total flux cleaned = -0.00276772 Jy ! Component: 2900 - total flux cleaned = -0.00274225 Jy ! Component: 2950 - total flux cleaned = -0.00272958 Jy ! Component: 3000 - total flux cleaned = -0.00281744 Jy ! Component: 3050 - total flux cleaned = -0.00286724 Jy ! Component: 3100 - total flux cleaned = -0.0028798 Jy ! Component: 3150 - total flux cleaned = -0.00291685 Jy ! Component: 3200 - total flux cleaned = -0.0029782 Jy ! Component: 3250 - total flux cleaned = -0.00303905 Jy ! Component: 3300 - total flux cleaned = -0.00307532 Jy ! Component: 3350 - total flux cleaned = -0.00312348 Jy ! Component: 3400 - total flux cleaned = -0.00317143 Jy ! Component: 3450 - total flux cleaned = -0.0032667 Jy ! Component: 3500 - total flux cleaned = -0.00331407 Jy ! Component: 3550 - total flux cleaned = -0.00333771 Jy ! Component: 3600 - total flux cleaned = -0.00339653 Jy ! Component: 3650 - total flux cleaned = -0.00340831 Jy ! Component: 3700 - total flux cleaned = -0.00346678 Jy ! Component: 3750 - total flux cleaned = -0.00350172 Jy ! Component: 3800 - total flux cleaned = -0.00355966 Jy ! Component: 3850 - total flux cleaned = -0.0035943 Jy ! Component: 3900 - total flux cleaned = -0.00364032 Jy ! Component: 3950 - total flux cleaned = -0.00364032 Jy ! Component: 4000 - total flux cleaned = -0.00367463 Jy ! Component: 4050 - total flux cleaned = -0.00369747 Jy ! Total flux subtracted in 4096 components = -0.0037203 Jy ! Clean residual min=-0.000679 max=0.000705 Jy/beam ! Clean residual mean=0.000002 rms=0.000189 Jy/beam ! Combined flux in latest and established models = 0.153786 Jy keep ! Adding 260 model components to the UV plane model. ! The established model now contains 298 components and 0.153786 Jy ![Exited script file: muppet] wmap "J2342-2223_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.954 x 6.694 at 1.274 degrees (North through East) ! Clean map min=-0.0016909 max=0.15103 Jy/beam ! Writing clean map to FITS file: J2342-2223_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.151028 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000186877 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.371211 0.371211 0.742422 1.48484 2.96969 5.93938 11.8788 23.7575 47.515 95.03 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.151 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.954 x 6.694 at 1.274 degrees (North through East) ! Clean map min=-0.0016909 max=0.15103 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2342-2223_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:38:25 2017