! Started logfile: J2341-2919_S_2014_06_09_pus_uvs.log on Wed Nov 16 20:06:40 2016 obs J2341-2919_S_2014_06_09_pus_uva.fits ! Reading UV FITS file: J2341-2919_S_2014_06_09_pus_uva.fits ! AN table 1: 122 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.583789 visibilities/baseline/integration-bin. ! Found source: J2341-2919 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 12820 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2341-2919_S_2014_06_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 275 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 275 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 275 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 275 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.952000Jy sigma=0.008178 ! Fit after self-cal, rms=0.911862Jy sigma=0.007876 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.074 mas, bmaj=13.53 mas, bpa=15.6 degrees ! Estimated noise=1170.6 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0732694 Jy ! Component: 100 - total flux cleaned = 0.0919466 Jy ! Total flux subtracted in 100 components = 0.0919466 Jy ! Clean residual min=-0.004661 max=0.007895 Jy/beam ! Clean residual mean=-0.000001 rms=0.001432 Jy/beam ! Combined flux in latest and established models = 0.0919466 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0919466 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106711Jy sigma=0.000777 ! Fit after self-cal, rms=0.106670Jy sigma=0.000777 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.836 mas, bmaj=15.42 mas, bpa=13.98 degrees ! Estimated noise=739.415 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00910111 Jy ! Component: 100 - total flux cleaned = 0.0136073 Jy ! Component: 150 - total flux cleaned = 0.0161786 Jy ! Component: 200 - total flux cleaned = 0.017689 Jy ! Total flux subtracted in 200 components = 0.017689 Jy ! Clean residual min=-0.002704 max=0.003009 Jy/beam ! Clean residual mean=0.000021 rms=0.000782 Jy/beam ! Combined flux in latest and established models = 0.109636 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 51 components and 0.109636 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105870Jy sigma=0.000770 ! Fit after self-cal, rms=0.105809Jy sigma=0.000770 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.86 HN 1.06 KP 1.08 ! LA 1.18 MK 1.00* NL 0.96 OV 0.93 ! PT 1.02 SC 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.06 KP 1.07 ! LA 1.18 MK 1.00* NL 1.09 OV 0.95 ! PT 1.00 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.08 HN 1.05 KP 0.92 ! LA 0.89 MK 1.00* NL 0.97 OV 0.91 ! PT 1.00 SC 1.08 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 1.01 KP 0.87 ! LA 0.90 MK 1.00* NL 1.07 OV 0.98 ! PT 1.03 SC 0.97 ! ! ! Fit before self-cal, rms=0.105809Jy sigma=0.000770 ! Fit after self-cal, rms=0.104693Jy sigma=0.000763 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.822 mas, bmaj=15.53 mas, bpa=14.08 degrees ! Estimated noise=735.691 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000440621 Jy ! Component: 100 - total flux cleaned = 0.000480065 Jy ! Component: 150 - total flux cleaned = 0.000513678 Jy ! Component: 200 - total flux cleaned = 0.000512953 Jy ! Total flux subtracted in 200 components = 0.000512953 Jy ! Clean residual min=-0.001976 max=0.002577 Jy/beam ! Clean residual mean=0.000003 rms=0.000585 Jy/beam ! Combined flux in latest and established models = 0.110149 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 60 components and 0.110149 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104662Jy sigma=0.000763 ! Fit after self-cal, rms=0.104671Jy sigma=0.000763 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104671Jy sigma=0.000763 ! Fit after self-cal, rms=0.104225Jy sigma=0.000763 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.815 mas, bmaj=15.5 mas, bpa=14.06 degrees ! Estimated noise=733.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000287989 Jy ! Component: 100 - total flux cleaned = 0.000286427 Jy ! Component: 150 - total flux cleaned = 0.000287566 Jy ! Component: 200 - total flux cleaned = 0.000309793 Jy ! Total flux subtracted in 200 components = 0.000309793 Jy ! Clean residual min=-0.002012 max=0.002503 Jy/beam ! Clean residual mean=0.000003 rms=0.000574 Jy/beam ! Combined flux in latest and established models = 0.110458 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 61 components and 0.110458 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104209Jy sigma=0.000763 ! Fit after self-cal, rms=0.104195Jy sigma=0.000763 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-43.5, 79.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00200542 Jy ! Component: 100 - total flux cleaned = 0.0020709 Jy ! Component: 150 - total flux cleaned = 0.00193166 Jy ! Component: 200 - total flux cleaned = 0.00174354 Jy ! Total flux subtracted in 200 components = 0.00174354 Jy ! Clean residual min=-0.001904 max=0.001916 Jy/beam ! Clean residual mean=0.000004 rms=0.000527 Jy/beam ! Combined flux in latest and established models = 0.112202 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 93 components and 0.112202 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104132Jy sigma=0.000762 ! Fit after self-cal, rms=0.104117Jy sigma=0.000762 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104117Jy sigma=0.000762 ! Fit after self-cal, rms=0.104387Jy sigma=0.000762 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.811 mas, bmaj=15.45 mas, bpa=13.94 degrees ! Estimated noise=732.673 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000445478 Jy ! Component: 100 - total flux cleaned = 0.00062113 Jy ! Component: 150 - total flux cleaned = 0.00059501 Jy ! Component: 200 - total flux cleaned = 0.000571774 Jy ! Total flux subtracted in 200 components = 0.000571774 Jy ! Clean residual min=-0.001839 max=0.001884 Jy/beam ! Clean residual mean=0.000001 rms=0.000480 Jy/beam ! Combined flux in latest and established models = 0.112774 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 110 components and 0.112774 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104366Jy sigma=0.000762 ! Fit after self-cal, rms=0.104374Jy sigma=0.000762 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0001559 Jy ! Component: 100 - total flux cleaned = 0.000156639 Jy ! Component: 150 - total flux cleaned = 0.000155869 Jy ! Component: 200 - total flux cleaned = 0.000155243 Jy ! Total flux subtracted in 200 components = 0.000155243 Jy ! Clean residual min=-0.001803 max=0.001863 Jy/beam ! Clean residual mean=0.000001 rms=0.000473 Jy/beam ! Combined flux in latest and established models = 0.112929 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 120 components and 0.112929 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104364Jy sigma=0.000761 ! Fit after self-cal, rms=0.104359Jy sigma=0.000761 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104359Jy sigma=0.000761 ! Fit after self-cal, rms=0.104187Jy sigma=0.000761 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.702 mas, bmaj=24.37 mas, bpa=2.29 degrees ! Estimated noise=825.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000621159 Jy ! Component: 100 - total flux cleaned = 0.000716752 Jy ! Component: 150 - total flux cleaned = 0.000808746 Jy ! Component: 200 - total flux cleaned = 0.000898756 Jy ! Total flux subtracted in 200 components = 0.000898756 Jy ! Clean residual min=-0.001852 max=0.001640 Jy/beam ! Clean residual mean=0.000004 rms=0.000517 Jy/beam ! Combined flux in latest and established models = 0.113828 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 142 components and 0.113828 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104181Jy sigma=0.000761 ! Fit after self-cal, rms=0.104169Jy sigma=0.000761 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000202296 Jy ! Component: 100 - total flux cleaned = 0.000262138 Jy ! Component: 150 - total flux cleaned = 0.000252084 Jy ! Component: 200 - total flux cleaned = 0.000251952 Jy ! Total flux subtracted in 200 components = 0.000251952 Jy ! Clean residual min=-0.001831 max=0.001626 Jy/beam ! Clean residual mean=0.000004 rms=0.000513 Jy/beam ! Combined flux in latest and established models = 0.11408 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 160 components and 0.11408 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104166Jy sigma=0.000761 ! Fit after self-cal, rms=0.104161Jy sigma=0.000761 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.809 mas, bmaj=15.43 mas, bpa=13.94 degrees ! Estimated noise=731.768 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.809 x 15.43 at 13.94 degrees (North through East) ! Clean map min=-0.0016918 max=0.090731 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.055 mas, bmaj=13.58 mas, bpa=15.53 degrees ! Estimated noise=1144.07 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0714158 Jy ! Component: 100 - total flux cleaned = 0.0904329 Jy ! Component: 150 - total flux cleaned = 0.0992104 Jy ! Component: 200 - total flux cleaned = 0.104363 Jy ! Total flux subtracted in 200 components = 0.104363 Jy ! Clean residual min=-0.003354 max=0.003169 Jy/beam ! Clean residual mean=-0.000003 rms=0.000861 Jy/beam ! Combined flux in latest and established models = 0.104363 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and 0.104363 Jy ! Inverting map and beam ! Estimated beam: bmin=3.809 mas, bmaj=15.43 mas, bpa=13.94 degrees ! Estimated noise=731.768 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00385362 Jy ! Component: 100 - total flux cleaned = 0.00618593 Jy ! Component: 150 - total flux cleaned = 0.00712503 Jy ! Component: 200 - total flux cleaned = 0.00780376 Jy ! Total flux subtracted in 200 components = 0.00780376 Jy ! Clean residual min=-0.001996 max=0.002005 Jy/beam ! Clean residual mean=-0.000002 rms=0.000513 Jy/beam ! Combined flux in latest and established models = 0.112167 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 64 components and 0.112167 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.702 mas, bmaj=24.37 mas, bpa=2.29 degrees ! Estimated noise=825.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00123134 Jy ! Component: 100 - total flux cleaned = 0.0017631 Jy ! Component: 150 - total flux cleaned = 0.00176504 Jy ! Component: 200 - total flux cleaned = 0.00174675 Jy ! Total flux subtracted in 200 components = 0.00174675 Jy ! Clean residual min=-0.001916 max=0.001778 Jy/beam ! Clean residual mean=0.000003 rms=0.000529 Jy/beam ! Combined flux in latest and established models = 0.113913 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.77708e-05 Jy ! Component: 100 - total flux cleaned = -3.43135e-05 Jy ! Component: 150 - total flux cleaned = -4.91063e-05 Jy ! Component: 200 - total flux cleaned = -4.86123e-05 Jy ! Total flux subtracted in 200 components = -4.86123e-05 Jy ! Clean residual min=-0.001887 max=0.001737 Jy/beam ! Clean residual mean=0.000003 rms=0.000523 Jy/beam ! Combined flux in latest and established models = 0.113865 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 92 components and 0.113865 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.809 mas, bmaj=15.43 mas, bpa=13.94 degrees ! Estimated noise=731.768 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000354267 Jy ! Component: 100 - total flux cleaned = -0.000417778 Jy ! Component: 150 - total flux cleaned = -0.000473674 Jy ! Component: 200 - total flux cleaned = -0.000523612 Jy ! Total flux subtracted in 200 components = -0.000523612 Jy ! Clean residual min=-0.001809 max=0.001983 Jy/beam ! Clean residual mean=0.000000 rms=0.000478 Jy/beam ! Combined flux in latest and established models = 0.113341 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 104 components and 0.113341 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104183Jy sigma=0.000762 ! Fit after self-cal, rms=0.104174Jy sigma=0.000761 wmodel J2341-2919_S_2014_06_09_pus_map.mod ! Writing 104 model components to file: J2341-2919_S_2014_06_09_pus_map.mod wobs J2341-2919_S_2014_06_09_pus_uvs.fits ! Writing UV FITS file: J2341-2919_S_2014_06_09_pus_uvs.fits wwins J2341-2919_S_2014_06_09_pus_map.win ! wwins: Wrote 2 windows to J2341-2919_S_2014_06_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00018725 Jy ! Component: 100 - total flux cleaned = -0.00028129 Jy ! Component: 150 - total flux cleaned = -0.000310852 Jy ! Component: 200 - total flux cleaned = -0.00033795 Jy ! Component: 250 - total flux cleaned = -0.000285833 Jy ! Component: 300 - total flux cleaned = -0.000235398 Jy ! Component: 350 - total flux cleaned = -0.000284852 Jy ! Component: 400 - total flux cleaned = -0.000261293 Jy ! Component: 450 - total flux cleaned = -0.000285021 Jy ! Component: 500 - total flux cleaned = -0.000352448 Jy ! Component: 550 - total flux cleaned = -0.000373893 Jy ! Component: 600 - total flux cleaned = -0.000438055 Jy ! Component: 650 - total flux cleaned = -0.000395449 Jy ! Component: 700 - total flux cleaned = -0.000457608 Jy ! Component: 750 - total flux cleaned = -0.000518903 Jy ! Component: 800 - total flux cleaned = -0.000578792 Jy ! Component: 850 - total flux cleaned = -0.000598641 Jy ! Component: 900 - total flux cleaned = -0.000617997 Jy ! Component: 950 - total flux cleaned = -0.000655848 Jy ! Component: 1000 - total flux cleaned = -0.000656186 Jy ! Component: 1050 - total flux cleaned = -0.000747537 Jy ! Component: 1100 - total flux cleaned = -0.000765113 Jy ! Component: 1150 - total flux cleaned = -0.000800637 Jy ! Component: 1200 - total flux cleaned = -0.000818129 Jy ! Component: 1250 - total flux cleaned = -0.000852267 Jy ! Component: 1300 - total flux cleaned = -0.000852165 Jy ! Component: 1350 - total flux cleaned = -0.00083578 Jy ! Component: 1400 - total flux cleaned = -0.000852613 Jy ! Component: 1450 - total flux cleaned = -0.000852638 Jy ! Component: 1500 - total flux cleaned = -0.000852786 Jy ! Component: 1550 - total flux cleaned = -0.000805672 Jy ! Component: 1600 - total flux cleaned = -0.000790093 Jy ! Component: 1650 - total flux cleaned = -0.000744317 Jy ! Component: 1700 - total flux cleaned = -0.000699255 Jy ! Component: 1750 - total flux cleaned = -0.000743906 Jy ! Component: 1800 - total flux cleaned = -0.00069965 Jy ! Component: 1850 - total flux cleaned = -0.000699953 Jy ! Component: 1900 - total flux cleaned = -0.000699863 Jy ! Component: 1950 - total flux cleaned = -0.000657182 Jy ! Component: 2000 - total flux cleaned = -0.000657323 Jy ! Component: 2050 - total flux cleaned = -0.000629674 Jy ! Component: 2100 - total flux cleaned = -0.000574879 Jy ! Component: 2150 - total flux cleaned = -0.000534319 Jy ! Component: 2200 - total flux cleaned = -0.000494149 Jy ! Component: 2250 - total flux cleaned = -0.000428034 Jy ! Component: 2300 - total flux cleaned = -0.000349199 Jy ! Component: 2350 - total flux cleaned = -0.000336029 Jy ! Component: 2400 - total flux cleaned = -0.000220375 Jy ! Component: 2450 - total flux cleaned = -0.000207598 Jy ! Component: 2500 - total flux cleaned = -0.000144558 Jy ! Component: 2550 - total flux cleaned = -8.22712e-05 Jy ! Component: 2600 - total flux cleaned = -6.99968e-05 Jy ! Component: 2650 - total flux cleaned = -3.31451e-05 Jy ! Component: 2700 - total flux cleaned = 5.18208e-05 Jy ! Component: 2750 - total flux cleaned = 8.77531e-05 Jy ! Component: 2800 - total flux cleaned = 0.000171246 Jy ! Component: 2850 - total flux cleaned = 0.000242226 Jy ! Component: 2900 - total flux cleaned = 0.000300971 Jy ! Component: 2950 - total flux cleaned = 0.000347479 Jy ! Component: 3000 - total flux cleaned = 0.000439795 Jy ! Component: 3050 - total flux cleaned = 0.000508443 Jy ! Component: 3100 - total flux cleaned = 0.000553834 Jy ! Component: 3150 - total flux cleaned = 0.000643968 Jy ! Component: 3200 - total flux cleaned = 0.0006663 Jy ! Component: 3250 - total flux cleaned = 0.00071074 Jy ! Component: 3300 - total flux cleaned = 0.000754972 Jy ! Component: 3350 - total flux cleaned = 0.000820695 Jy ! Component: 3400 - total flux cleaned = 0.000853413 Jy ! Component: 3450 - total flux cleaned = 0.000896706 Jy ! Component: 3500 - total flux cleaned = 0.000907361 Jy ! Component: 3550 - total flux cleaned = 0.000928825 Jy ! Component: 3600 - total flux cleaned = 0.000971198 Jy ! Component: 3650 - total flux cleaned = 0.000928961 Jy ! Component: 3700 - total flux cleaned = 0.000960396 Jy ! Component: 3750 - total flux cleaned = 0.000991658 Jy ! Component: 3800 - total flux cleaned = 0.001002 Jy ! Component: 3850 - total flux cleaned = 0.000991763 Jy ! Component: 3900 - total flux cleaned = 0.00103266 Jy ! Component: 3950 - total flux cleaned = 0.00105294 Jy ! Component: 4000 - total flux cleaned = 0.00104279 Jy ! Component: 4050 - total flux cleaned = 0.00105282 Jy ! Total flux subtracted in 4096 components = 0.00101272 Jy ! Clean residual min=-0.000552 max=0.000701 Jy/beam ! Clean residual mean=-0.000001 rms=0.000188 Jy/beam ! Combined flux in latest and established models = 0.114354 Jy keep ! Adding 275 model components to the UV plane model. ! The established model now contains 379 components and 0.114354 Jy ![Exited script file: muppet] wmap "J2341-2919_S_2014_06_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.809 x 15.43 at 13.94 degrees (North through East) ! Clean map min=-0.0016357 max=0.089628 Jy/beam ! Writing clean map to FITS file: J2341-2919_S_2014_06_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0896277 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000184636 device "J2341-2919_S_2014_06_09_pus\_map.eps/VPS" ! Attempting to open device: 'J2341-2919_S_2014_06_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.61801 0.61801 1.23602 2.47204 4.94408 9.88817 19.7763 39.5527 79.1053 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.089 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.809 x 15.43 at 13.94 degrees (North through East) ! Clean map min=-0.0016357 max=0.089628 Jy/beam quit ! Quitting program ! Log file J2341-2919_S_2014_06_09_pus_uvs.log closed on Wed Nov 16 20:06:45 2016