! Started logfile: J2340+3319_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:38:16 2017 obs J2340+3319_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J2340+3319_S_2014_01_04_pus_uva.fits ! AN table 1: 60 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.430556 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2340+3319 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 3720 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2340+3319_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 180 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 180 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 180 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 180 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.843535Jy sigma=0.012044 ! Fit after self-cal, rms=0.831734Jy sigma=0.011860 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.039 mas, bmaj=5.617 mas, bpa=-11.35 degrees ! Estimated noise=1249.44 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.127655 Jy ! Component: 100 - total flux cleaned = 0.166478 Jy ! Total flux subtracted in 100 components = 0.166478 Jy ! Clean residual min=-0.008093 max=0.015299 Jy/beam ! Clean residual mean=0.000027 rms=0.002527 Jy/beam ! Combined flux in latest and established models = 0.166478 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.166478 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076921Jy sigma=0.000960 ! Fit after self-cal, rms=0.077018Jy sigma=0.000959 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0157246 Jy ! Component: 100 - total flux cleaned = 0.0234002 Jy ! Total flux subtracted in 100 components = 0.0234002 Jy ! Clean residual min=-0.006198 max=0.006691 Jy/beam ! Clean residual mean=0.000009 rms=0.001657 Jy/beam ! Combined flux in latest and established models = 0.189879 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 15 components and 0.189879 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072285Jy sigma=0.000897 ! Fit after self-cal, rms=0.072339Jy sigma=0.000897 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.647 mas, bmaj=6.525 mas, bpa=-8.361 degrees ! Estimated noise=854.269 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00759162 Jy ! Component: 100 - total flux cleaned = 0.0119827 Jy ! Component: 150 - total flux cleaned = 0.0147336 Jy ! Component: 200 - total flux cleaned = 0.0164666 Jy ! Total flux subtracted in 200 components = 0.0164666 Jy ! Clean residual min=-0.005764 max=0.006841 Jy/beam ! Clean residual mean=0.000006 rms=0.001617 Jy/beam ! Combined flux in latest and established models = 0.206345 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 32 components and 0.206345 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071277Jy sigma=0.000890 ! Fit after self-cal, rms=0.071227Jy sigma=0.000890 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00* KP 1.00* LA 1.00 ! MK 0.95 NL 0.99 OV 0.99 PT 1.03 ! SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 1.00* KP 1.00* LA 1.00 ! MK 1.01 NL 1.06 OV 1.00 PT 0.97 ! SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* KP 1.00* LA 0.84 ! MK 1.04 NL 1.00 OV 0.94 PT 0.96 ! SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.19 FD 1.00* KP 1.00* LA 0.90 ! MK 0.96 NL 1.07 OV 1.01 PT 1.04 ! SC 0.97 ! ! ! Fit before self-cal, rms=0.071227Jy sigma=0.000890 ! Fit after self-cal, rms=0.067786Jy sigma=0.000845 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.631 mas, bmaj=6.533 mas, bpa=-7.983 degrees ! Estimated noise=854.712 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000571761 Jy ! Component: 100 - total flux cleaned = -0.000571496 Jy ! Component: 150 - total flux cleaned = -0.000697414 Jy ! Component: 200 - total flux cleaned = -0.000749601 Jy ! Total flux subtracted in 200 components = -0.000749601 Jy ! Clean residual min=-0.003536 max=0.003350 Jy/beam ! Clean residual mean=-0.000000 rms=0.000809 Jy/beam ! Combined flux in latest and established models = 0.205595 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 39 components and 0.205596 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067642Jy sigma=0.000844 ! Fit after self-cal, rms=0.067490Jy sigma=0.000843 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067490Jy sigma=0.000843 ! Fit after self-cal, rms=0.066878Jy sigma=0.000841 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.619 mas, bmaj=6.536 mas, bpa=-8.277 degrees ! Estimated noise=853.162 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000295988 Jy ! Component: 100 - total flux cleaned = -0.000349008 Jy ! Component: 150 - total flux cleaned = -0.000393504 Jy ! Component: 200 - total flux cleaned = -0.000434705 Jy ! Total flux subtracted in 200 components = -0.000434705 Jy ! Clean residual min=-0.003316 max=0.002876 Jy/beam ! Clean residual mean=0.000002 rms=0.000703 Jy/beam ! Combined flux in latest and established models = 0.205161 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 43 components and 0.205161 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066803Jy sigma=0.000840 ! Fit after self-cal, rms=0.066805Jy sigma=0.000840 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.47593e-05 Jy ! Component: 100 - total flux cleaned = -0.000127207 Jy ! Component: 150 - total flux cleaned = -0.000156963 Jy ! Component: 200 - total flux cleaned = -0.000213466 Jy ! Total flux subtracted in 200 components = -0.000213466 Jy ! Clean residual min=-0.003222 max=0.002889 Jy/beam ! Clean residual mean=0.000002 rms=0.000691 Jy/beam ! Combined flux in latest and established models = 0.204947 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 45 components and 0.204947 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066777Jy sigma=0.000840 ! Fit after self-cal, rms=0.066786Jy sigma=0.000840 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066786Jy sigma=0.000840 ! Fit after self-cal, rms=0.066516Jy sigma=0.000840 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.612 mas, bmaj=6.532 mas, bpa=-8.321 degrees ! Estimated noise=852.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.54601e-05 Jy ! Component: 100 - total flux cleaned = -0.000122463 Jy ! Component: 150 - total flux cleaned = -0.000176945 Jy ! Component: 200 - total flux cleaned = -0.00022729 Jy ! Total flux subtracted in 200 components = -0.00022729 Jy ! Clean residual min=-0.003128 max=0.002788 Jy/beam ! Clean residual mean=0.000003 rms=0.000663 Jy/beam ! Combined flux in latest and established models = 0.20472 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 46 components and 0.20472 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066491Jy sigma=0.000839 ! Fit after self-cal, rms=0.066483Jy sigma=0.000839 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.65851e-05 Jy ! Component: 100 - total flux cleaned = -9.59838e-05 Jy ! Component: 150 - total flux cleaned = -0.000137419 Jy ! Component: 200 - total flux cleaned = -0.000156713 Jy ! Total flux subtracted in 200 components = -0.000156713 Jy ! Clean residual min=-0.003077 max=0.002791 Jy/beam ! Clean residual mean=0.000003 rms=0.000656 Jy/beam ! Combined flux in latest and established models = 0.204563 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 47 components and 0.204563 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066470Jy sigma=0.000839 ! Fit after self-cal, rms=0.066475Jy sigma=0.000839 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066475Jy sigma=0.000839 ! Fit after self-cal, rms=0.066314Jy sigma=0.000839 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.31 mas, bmaj=11.85 mas, bpa=3.322 degrees ! Estimated noise=975.686 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000274405 Jy ! Component: 100 - total flux cleaned = 0.000226571 Jy ! Component: 150 - total flux cleaned = 0.000184368 Jy ! Component: 200 - total flux cleaned = 0.000184516 Jy ! Total flux subtracted in 200 components = 0.000184516 Jy ! Clean residual min=-0.002439 max=0.002596 Jy/beam ! Clean residual mean=0.000004 rms=0.000703 Jy/beam ! Combined flux in latest and established models = 0.204748 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 51 components and 0.204748 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066317Jy sigma=0.000839 ! Fit after self-cal, rms=0.066306Jy sigma=0.000839 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00010748 Jy ! Component: 100 - total flux cleaned = 8.0889e-05 Jy ! Component: 150 - total flux cleaned = 5.68325e-05 Jy ! Component: 200 - total flux cleaned = 5.70737e-05 Jy ! Total flux subtracted in 200 components = 5.70737e-05 Jy ! Clean residual min=-0.002458 max=0.002574 Jy/beam ! Clean residual mean=0.000004 rms=0.000699 Jy/beam ! Combined flux in latest and established models = 0.204805 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 57 components and 0.204805 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066312Jy sigma=0.000839 ! Fit after self-cal, rms=0.066310Jy sigma=0.000839 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.608 mas, bmaj=6.529 mas, bpa=-8.272 degrees ! Estimated noise=852.011 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.608 x 6.529 at -8.272 degrees (North through East) ! Clean map min=-0.0028932 max=0.16984 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.996 mas, bmaj=5.6 mas, bpa=-11.01 degrees ! Estimated noise=1257.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.128614 Jy ! Component: 100 - total flux cleaned = 0.168563 Jy ! Component: 150 - total flux cleaned = 0.185622 Jy ! Component: 200 - total flux cleaned = 0.194413 Jy ! Total flux subtracted in 200 components = 0.194413 Jy ! Clean residual min=-0.005130 max=0.004384 Jy/beam ! Clean residual mean=0.000011 rms=0.001145 Jy/beam ! Combined flux in latest and established models = 0.194413 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.194413 Jy ! Inverting map and beam ! Estimated beam: bmin=3.608 mas, bmaj=6.529 mas, bpa=-8.272 degrees ! Estimated noise=852.011 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00566895 Jy ! Component: 100 - total flux cleaned = 0.00808976 Jy ! Component: 150 - total flux cleaned = 0.00861729 Jy ! Component: 200 - total flux cleaned = 0.00902118 Jy ! Total flux subtracted in 200 components = 0.00902118 Jy ! Clean residual min=-0.003467 max=0.002735 Jy/beam ! Clean residual mean=0.000003 rms=0.000682 Jy/beam ! Combined flux in latest and established models = 0.203434 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 32 components and 0.203434 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.31 mas, bmaj=11.85 mas, bpa=3.322 degrees ! Estimated noise=975.686 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000963072 Jy ! Component: 100 - total flux cleaned = 0.00102172 Jy ! Component: 150 - total flux cleaned = 0.0010574 Jy ! Component: 200 - total flux cleaned = 0.00108794 Jy ! Total flux subtracted in 200 components = 0.00108794 Jy ! Clean residual min=-0.002551 max=0.002567 Jy/beam ! Clean residual mean=0.000004 rms=0.000713 Jy/beam ! Combined flux in latest and established models = 0.204522 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.7369e-05 Jy ! Component: 100 - total flux cleaned = 9.37373e-06 Jy ! Component: 150 - total flux cleaned = 9.04434e-06 Jy ! Component: 200 - total flux cleaned = 8.84752e-06 Jy ! Total flux subtracted in 200 components = 8.84752e-06 Jy ! Clean residual min=-0.002541 max=0.002572 Jy/beam ! Clean residual mean=0.000004 rms=0.000711 Jy/beam ! Combined flux in latest and established models = 0.204531 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 42 components and 0.204531 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.608 mas, bmaj=6.529 mas, bpa=-8.272 degrees ! Estimated noise=852.011 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.26652e-05 Jy ! Component: 100 - total flux cleaned = -9.14722e-05 Jy ! Component: 150 - total flux cleaned = -6.38034e-05 Jy ! Component: 200 - total flux cleaned = -6.24609e-05 Jy ! Total flux subtracted in 200 components = -6.24609e-05 Jy ! Clean residual min=-0.003167 max=0.002824 Jy/beam ! Clean residual mean=0.000003 rms=0.000649 Jy/beam ! Combined flux in latest and established models = 0.204468 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 50 components and 0.204468 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066301Jy sigma=0.000839 ! Fit after self-cal, rms=0.066296Jy sigma=0.000839 wmodel J2340+3319_S_2014_01_04_pus_map.mod ! Writing 50 model components to file: J2340+3319_S_2014_01_04_pus_map.mod wobs J2340+3319_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J2340+3319_S_2014_01_04_pus_uvs.fits wwins J2340+3319_S_2014_01_04_pus_map.win ! wwins: Wrote 1 windows to J2340+3319_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000313926 Jy ! Component: 100 - total flux cleaned = -0.000355234 Jy ! Component: 150 - total flux cleaned = -0.000477713 Jy ! Component: 200 - total flux cleaned = -0.000630803 Jy ! Component: 250 - total flux cleaned = -0.000847914 Jy ! Component: 300 - total flux cleaned = -0.00105401 Jy ! Component: 350 - total flux cleaned = -0.00115376 Jy ! Component: 400 - total flux cleaned = -0.00128089 Jy ! Component: 450 - total flux cleaned = -0.00140108 Jy ! Component: 500 - total flux cleaned = -0.00145834 Jy ! Component: 550 - total flux cleaned = -0.00145963 Jy ! Component: 600 - total flux cleaned = -0.00154051 Jy ! Component: 650 - total flux cleaned = -0.00153996 Jy ! Component: 700 - total flux cleaned = -0.00156414 Jy ! Component: 750 - total flux cleaned = -0.00151539 Jy ! Component: 800 - total flux cleaned = -0.00153871 Jy ! Component: 850 - total flux cleaned = -0.00153832 Jy ! Component: 900 - total flux cleaned = -0.00144899 Jy ! Component: 950 - total flux cleaned = -0.00140601 Jy ! Component: 1000 - total flux cleaned = -0.00136404 Jy ! Component: 1050 - total flux cleaned = -0.00134343 Jy ! Component: 1100 - total flux cleaned = -0.00122236 Jy ! Component: 1150 - total flux cleaned = -0.00116305 Jy ! Component: 1200 - total flux cleaned = -0.00104649 Jy ! Component: 1250 - total flux cleaned = -0.000932556 Jy ! Component: 1300 - total flux cleaned = -0.000820937 Jy ! Component: 1350 - total flux cleaned = -0.000765979 Jy ! Component: 1400 - total flux cleaned = -0.000658598 Jy ! Component: 1450 - total flux cleaned = -0.000570977 Jy ! Component: 1500 - total flux cleaned = -0.000502276 Jy ! Component: 1550 - total flux cleaned = -0.000400849 Jy ! Component: 1600 - total flux cleaned = -0.000284567 Jy ! Component: 1650 - total flux cleaned = -0.000219161 Jy ! Component: 1700 - total flux cleaned = -0.000139062 Jy ! Component: 1750 - total flux cleaned = -6.01927e-05 Jy ! Component: 1800 - total flux cleaned = 3.30608e-05 Jy ! Component: 1850 - total flux cleaned = 9.42131e-05 Jy ! Component: 1900 - total flux cleaned = 0.000244597 Jy ! Component: 1950 - total flux cleaned = 0.000347978 Jy ! Component: 2000 - total flux cleaned = 0.000450218 Jy ! Component: 2050 - total flux cleaned = 0.000507902 Jy ! Component: 2100 - total flux cleaned = 0.000607699 Jy ! Component: 2150 - total flux cleaned = 0.000706129 Jy ! Component: 2200 - total flux cleaned = 0.000789519 Jy ! Component: 2250 - total flux cleaned = 0.00088565 Jy ! Component: 2300 - total flux cleaned = 0.00100773 Jy ! Component: 2350 - total flux cleaned = 0.00110135 Jy ! Component: 2400 - total flux cleaned = 0.0012071 Jy ! Component: 2450 - total flux cleaned = 0.00131177 Jy ! Component: 2500 - total flux cleaned = 0.00140252 Jy ! Component: 2550 - total flux cleaned = 0.00150498 Jy ! Component: 2600 - total flux cleaned = 0.0015684 Jy ! Component: 2650 - total flux cleaned = 0.00164372 Jy ! Component: 2700 - total flux cleaned = 0.00171832 Jy ! Component: 2750 - total flux cleaned = 0.00179237 Jy ! Component: 2800 - total flux cleaned = 0.00186576 Jy ! Component: 2850 - total flux cleaned = 0.00195043 Jy ! Component: 2900 - total flux cleaned = 0.00201051 Jy ! Component: 2950 - total flux cleaned = 0.00207004 Jy ! Component: 3000 - total flux cleaned = 0.00214094 Jy ! Component: 3050 - total flux cleaned = 0.00218779 Jy ! Component: 3100 - total flux cleaned = 0.00223432 Jy ! Component: 3150 - total flux cleaned = 0.00231527 Jy ! Component: 3200 - total flux cleaned = 0.00234971 Jy ! Component: 3250 - total flux cleaned = 0.00239546 Jy ! Component: 3300 - total flux cleaned = 0.00242954 Jy ! Component: 3350 - total flux cleaned = 0.00247473 Jy ! Component: 3400 - total flux cleaned = 0.00250843 Jy ! Component: 3450 - total flux cleaned = 0.00257552 Jy ! Component: 3500 - total flux cleaned = 0.00260888 Jy ! Component: 3550 - total flux cleaned = 0.00264209 Jy ! Component: 3600 - total flux cleaned = 0.00268614 Jy ! Component: 3650 - total flux cleaned = 0.00270806 Jy ! Component: 3700 - total flux cleaned = 0.00272981 Jy ! Component: 3750 - total flux cleaned = 0.00276243 Jy ! Component: 3800 - total flux cleaned = 0.00278416 Jy ! Component: 3850 - total flux cleaned = 0.00279502 Jy ! Component: 3900 - total flux cleaned = 0.00280589 Jy ! Component: 3950 - total flux cleaned = 0.00282739 Jy ! Component: 4000 - total flux cleaned = 0.00283814 Jy ! Component: 4050 - total flux cleaned = 0.00285963 Jy ! Total flux subtracted in 4096 components = 0.00287032 Jy ! Clean residual min=-0.000619 max=0.000639 Jy/beam ! Clean residual mean=0.000004 rms=0.000173 Jy/beam ! Combined flux in latest and established models = 0.207339 Jy keep ! Adding 231 model components to the UV plane model. ! The established model now contains 281 components and 0.207338 Jy ![Exited script file: muppet] wmap "J2340+3319_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.608 x 6.529 at -8.272 degrees (North through East) ! Clean map min=-0.0020015 max=0.16991 Jy/beam ! Writing clean map to FITS file: J2340+3319_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.169911 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000169536 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.299338 0.299338 0.598675 1.19735 2.3947 4.7894 9.5788 19.1576 38.3152 76.6304 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.169 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.608 x 6.529 at -8.272 degrees (North through East) ! Clean map min=-0.0020015 max=0.16991 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2340+3319_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:38:20 2017