! Started logfile: J2339-2310_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:38:11 2017 obs J2339-2310_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J2339-2310_S_2014_01_04_pus_uva.fits ! AN table 1: 118 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.583333 visibilities/baseline/integration-bin. ! Found source: J2339-2310 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 9912 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2339-2310_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 236 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 236 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 236 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 236 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.973762Jy sigma=0.011369 ! Fit after self-cal, rms=0.932984Jy sigma=0.010888 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.465 mas, bmaj=5.659 mas, bpa=3.233 degrees ! Estimated noise=1251.1 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.053994 Jy ! Component: 100 - total flux cleaned = 0.0695311 Jy ! Total flux subtracted in 100 components = 0.0695311 Jy ! Clean residual min=-0.005310 max=0.006166 Jy/beam ! Clean residual mean=-0.000027 rms=0.001296 Jy/beam ! Combined flux in latest and established models = 0.0695311 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0695311 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088708Jy sigma=0.000897 ! Fit after self-cal, rms=0.088470Jy sigma=0.000894 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.975 mas, bmaj=6.672 mas, bpa=1.377 degrees ! Estimated noise=641.221 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00814113 Jy ! Component: 100 - total flux cleaned = 0.0116973 Jy ! Component: 150 - total flux cleaned = 0.0136693 Jy ! Component: 200 - total flux cleaned = 0.0141421 Jy ! Total flux subtracted in 200 components = 0.0141421 Jy ! Clean residual min=-0.003293 max=0.004447 Jy/beam ! Clean residual mean=-0.000039 rms=0.000967 Jy/beam ! Combined flux in latest and established models = 0.0836732 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 22 components and 0.0836732 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087787Jy sigma=0.000886 ! Fit after self-cal, rms=0.087944Jy sigma=0.000886 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 1.00* KP 1.00* LA 1.10 ! MK 0.99 NL 1.07 OV 1.02 PT 1.03 ! SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00* KP 1.00* LA 0.98 ! MK 0.99 NL 1.02 OV 1.06 PT 1.00 ! SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00* KP 1.00* LA 0.85 ! MK 0.95 NL 1.10 OV 1.00 PT 0.98 ! SC 0.93 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00* KP 1.00* LA 0.92 ! MK 0.99 NL 1.23 OV 1.04 PT 1.00 ! SC 0.97 ! ! ! Fit before self-cal, rms=0.087944Jy sigma=0.000886 ! Fit after self-cal, rms=0.086725Jy sigma=0.000881 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.946 mas, bmaj=6.597 mas, bpa=1.757 degrees ! Estimated noise=638.392 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.5, -27.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00429324 Jy ! Component: 100 - total flux cleaned = 0.00576424 Jy ! Component: 150 - total flux cleaned = 0.00689727 Jy ! Component: 200 - total flux cleaned = 0.00764866 Jy ! Total flux subtracted in 200 components = 0.00764866 Jy ! Clean residual min=-0.002531 max=0.003017 Jy/beam ! Clean residual mean=-0.000022 rms=0.000683 Jy/beam ! Combined flux in latest and established models = 0.0913218 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 40 components and 0.0913218 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086466Jy sigma=0.000879 ! Fit after self-cal, rms=0.086902Jy sigma=0.000877 ! Inverting map ! Added new window around map position (-6, 8.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0031104 Jy ! Component: 100 - total flux cleaned = 0.00378492 Jy ! Component: 150 - total flux cleaned = 0.00440229 Jy ! Component: 200 - total flux cleaned = 0.00488435 Jy ! Total flux subtracted in 200 components = 0.00488435 Jy ! Clean residual min=-0.002346 max=0.002542 Jy/beam ! Clean residual mean=-0.000016 rms=0.000579 Jy/beam ! Combined flux in latest and established models = 0.0962062 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 58 components and 0.0962062 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086730Jy sigma=0.000875 ! Fit after self-cal, rms=0.086905Jy sigma=0.000875 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086905Jy sigma=0.000875 ! Fit after self-cal, rms=0.087827Jy sigma=0.000874 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.955 mas, bmaj=6.587 mas, bpa=1.846 degrees ! Estimated noise=639.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00175995 Jy ! Component: 100 - total flux cleaned = 0.00263189 Jy ! Component: 150 - total flux cleaned = 0.00310404 Jy ! Component: 200 - total flux cleaned = 0.00340382 Jy ! Total flux subtracted in 200 components = 0.00340382 Jy ! Clean residual min=-0.002010 max=0.001975 Jy/beam ! Clean residual mean=-0.000012 rms=0.000484 Jy/beam ! Combined flux in latest and established models = 0.09961 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 75 components and 0.09961 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087762Jy sigma=0.000873 ! Fit after self-cal, rms=0.088134Jy sigma=0.000873 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.02743e-05 Jy ! Component: 100 - total flux cleaned = 0.000200852 Jy ! Component: 150 - total flux cleaned = 0.000470383 Jy ! Component: 200 - total flux cleaned = 0.000642458 Jy ! Total flux subtracted in 200 components = 0.000642458 Jy ! Clean residual min=-0.002134 max=0.001889 Jy/beam ! Clean residual mean=-0.000011 rms=0.000487 Jy/beam ! Combined flux in latest and established models = 0.100252 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 83 components and 0.100252 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088083Jy sigma=0.000872 ! Fit after self-cal, rms=0.088213Jy sigma=0.000872 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088213Jy sigma=0.000872 ! Fit after self-cal, rms=0.089448Jy sigma=0.000872 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.964 mas, bmaj=6.593 mas, bpa=1.833 degrees ! Estimated noise=642.644 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000567067 Jy ! Component: 100 - total flux cleaned = 0.000980604 Jy ! Component: 150 - total flux cleaned = 0.00114648 Jy ! Component: 200 - total flux cleaned = 0.0012712 Jy ! Total flux subtracted in 200 components = 0.0012712 Jy ! Clean residual min=-0.002072 max=0.001859 Jy/beam ! Clean residual mean=-0.000010 rms=0.000467 Jy/beam ! Combined flux in latest and established models = 0.101524 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 89 components and 0.101524 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089415Jy sigma=0.000872 ! Fit after self-cal, rms=0.089580Jy sigma=0.000872 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.52755e-05 Jy ! Component: 100 - total flux cleaned = 0.000158384 Jy ! Component: 150 - total flux cleaned = 0.000278151 Jy ! Component: 200 - total flux cleaned = 0.000390796 Jy ! Total flux subtracted in 200 components = 0.000390796 Jy ! Clean residual min=-0.002156 max=0.001808 Jy/beam ! Clean residual mean=-0.000010 rms=0.000462 Jy/beam ! Combined flux in latest and established models = 0.101915 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 93 components and 0.101914 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089552Jy sigma=0.000871 ! Fit after self-cal, rms=0.089608Jy sigma=0.000871 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089608Jy sigma=0.000871 ! Fit after self-cal, rms=0.090474Jy sigma=0.000871 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.623 mas, bmaj=17.21 mas, bpa=8.566 degrees ! Estimated noise=792.015 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00122952 Jy ! Component: 100 - total flux cleaned = 0.00192927 Jy ! Component: 150 - total flux cleaned = 0.00235935 Jy ! Component: 200 - total flux cleaned = 0.00244689 Jy ! Total flux subtracted in 200 components = 0.00244689 Jy ! Clean residual min=-0.002005 max=0.001771 Jy/beam ! Clean residual mean=-0.000014 rms=0.000506 Jy/beam ! Combined flux in latest and established models = 0.104361 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 101 components and 0.104361 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090475Jy sigma=0.000871 ! Fit after self-cal, rms=0.090508Jy sigma=0.000871 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000429782 Jy ! Component: 100 - total flux cleaned = 0.000509406 Jy ! Component: 150 - total flux cleaned = 0.000537777 Jy ! Component: 200 - total flux cleaned = 0.000601862 Jy ! Total flux subtracted in 200 components = 0.000601862 Jy ! Clean residual min=-0.001894 max=0.001787 Jy/beam ! Clean residual mean=-0.000014 rms=0.000489 Jy/beam ! Combined flux in latest and established models = 0.104963 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 103 components and 0.104963 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090509Jy sigma=0.000871 ! Fit after self-cal, rms=0.090514Jy sigma=0.000871 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.965 mas, bmaj=6.593 mas, bpa=1.825 degrees ! Estimated noise=646.064 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.965 x 6.593 at 1.825 degrees (North through East) ! Clean map min=-0.0032683 max=0.06916 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.466 mas, bmaj=5.607 mas, bpa=3.829 degrees ! Estimated noise=1251.67 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0529088 Jy ! Component: 100 - total flux cleaned = 0.0682811 Jy ! Component: 150 - total flux cleaned = 0.0744547 Jy ! Component: 200 - total flux cleaned = 0.079566 Jy ! Total flux subtracted in 200 components = 0.079566 Jy ! Clean residual min=-0.004712 max=0.004927 Jy/beam ! Clean residual mean=-0.000025 rms=0.001165 Jy/beam ! Combined flux in latest and established models = 0.079566 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.079566 Jy ! Inverting map and beam ! Estimated beam: bmin=2.965 mas, bmaj=6.593 mas, bpa=1.825 degrees ! Estimated noise=646.064 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00686919 Jy ! Component: 100 - total flux cleaned = 0.0115252 Jy ! Component: 150 - total flux cleaned = 0.0149658 Jy ! Component: 200 - total flux cleaned = 0.0175326 Jy ! Total flux subtracted in 200 components = 0.0175326 Jy ! Clean residual min=-0.002720 max=0.002272 Jy/beam ! Clean residual mean=-0.000020 rms=0.000620 Jy/beam ! Combined flux in latest and established models = 0.0970986 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 44 components and 0.0970986 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.623 mas, bmaj=17.21 mas, bpa=8.566 degrees ! Estimated noise=792.015 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00264166 Jy ! Component: 100 - total flux cleaned = 0.0042307 Jy ! Component: 150 - total flux cleaned = 0.00534653 Jy ! Component: 200 - total flux cleaned = 0.00614385 Jy ! Total flux subtracted in 200 components = 0.00614385 Jy ! Clean residual min=-0.002097 max=0.001661 Jy/beam ! Clean residual mean=-0.000020 rms=0.000534 Jy/beam ! Combined flux in latest and established models = 0.103242 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00058501 Jy ! Component: 100 - total flux cleaned = 0.00096391 Jy ! Component: 150 - total flux cleaned = 0.001118 Jy ! Component: 200 - total flux cleaned = 0.00124534 Jy ! Total flux subtracted in 200 components = 0.00124534 Jy ! Clean residual min=-0.001960 max=0.001707 Jy/beam ! Clean residual mean=-0.000016 rms=0.000496 Jy/beam ! Combined flux in latest and established models = 0.104488 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 68 components and 0.104488 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.965 mas, bmaj=6.593 mas, bpa=1.825 degrees ! Estimated noise=646.064 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000622567 Jy ! Component: 100 - total flux cleaned = -0.000683362 Jy ! Component: 150 - total flux cleaned = -0.000687714 Jy ! Component: 200 - total flux cleaned = -0.00073475 Jy ! Total flux subtracted in 200 components = -0.00073475 Jy ! Clean residual min=-0.002325 max=0.002130 Jy/beam ! Clean residual mean=-0.000008 rms=0.000486 Jy/beam ! Combined flux in latest and established models = 0.103753 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 83 components and 0.103753 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090550Jy sigma=0.000872 ! Fit after self-cal, rms=0.090531Jy sigma=0.000872 wmodel J2339-2310_S_2014_01_04_pus_map.mod ! Writing 83 model components to file: J2339-2310_S_2014_01_04_pus_map.mod wobs J2339-2310_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J2339-2310_S_2014_01_04_pus_uvs.fits wwins J2339-2310_S_2014_01_04_pus_map.win ! wwins: Wrote 3 windows to J2339-2310_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000489577 Jy ! Component: 100 - total flux cleaned = -0.000525602 Jy ! Component: 150 - total flux cleaned = -0.000399747 Jy ! Component: 200 - total flux cleaned = -0.00028008 Jy ! Component: 250 - total flux cleaned = -0.000195271 Jy ! Component: 300 - total flux cleaned = -8.68485e-05 Jy ! Component: 350 - total flux cleaned = -9.01173e-06 Jy ! Component: 400 - total flux cleaned = 9.15574e-05 Jy ! Component: 450 - total flux cleaned = 0.000115862 Jy ! Component: 500 - total flux cleaned = 0.000163286 Jy ! Component: 550 - total flux cleaned = 0.000209565 Jy ! Component: 600 - total flux cleaned = 0.000209853 Jy ! Component: 650 - total flux cleaned = 0.000298452 Jy ! Component: 700 - total flux cleaned = 0.000276198 Jy ! Component: 750 - total flux cleaned = 0.000254691 Jy ! Component: 800 - total flux cleaned = 0.000171251 Jy ! Component: 850 - total flux cleaned = 0.000109931 Jy ! Component: 900 - total flux cleaned = 6.94876e-05 Jy ! Component: 950 - total flux cleaned = 1.00826e-05 Jy ! Component: 1000 - total flux cleaned = -6.74633e-05 Jy ! Component: 1050 - total flux cleaned = -8.69544e-05 Jy ! Component: 1100 - total flux cleaned = -0.00014344 Jy ! Component: 1150 - total flux cleaned = -0.000161752 Jy ! Component: 1200 - total flux cleaned = -0.000234261 Jy ! Component: 1250 - total flux cleaned = -0.000234364 Jy ! Component: 1300 - total flux cleaned = -0.000234364 Jy ! Component: 1350 - total flux cleaned = -0.000268722 Jy ! Component: 1400 - total flux cleaned = -0.000268567 Jy ! Component: 1450 - total flux cleaned = -0.000268419 Jy ! Component: 1500 - total flux cleaned = -0.000252066 Jy ! Component: 1550 - total flux cleaned = -0.00025196 Jy ! Component: 1600 - total flux cleaned = -0.000267751 Jy ! Component: 1650 - total flux cleaned = -0.000236001 Jy ! Component: 1700 - total flux cleaned = -0.000188887 Jy ! Component: 1750 - total flux cleaned = -0.000157911 Jy ! Component: 1800 - total flux cleaned = -0.00012731 Jy ! Component: 1850 - total flux cleaned = -0.000112128 Jy ! Component: 1900 - total flux cleaned = -0.000111994 Jy ! Component: 1950 - total flux cleaned = -8.21466e-05 Jy ! Component: 2000 - total flux cleaned = -5.29852e-05 Jy ! Component: 2050 - total flux cleaned = -2.38849e-05 Jy ! Component: 2100 - total flux cleaned = 4.78085e-06 Jy ! Component: 2150 - total flux cleaned = 4.88558e-06 Jy ! Component: 2200 - total flux cleaned = 8.97519e-05 Jy ! Component: 2250 - total flux cleaned = 7.55378e-05 Jy ! Component: 2300 - total flux cleaned = 6.16385e-05 Jy ! Component: 2350 - total flux cleaned = 8.90575e-05 Jy ! Component: 2400 - total flux cleaned = 0.000102545 Jy ! Component: 2450 - total flux cleaned = 0.000142994 Jy ! Component: 2500 - total flux cleaned = 0.000143019 Jy ! Component: 2550 - total flux cleaned = 0.000156305 Jy ! Component: 2600 - total flux cleaned = 0.000182598 Jy ! Component: 2650 - total flux cleaned = 0.000221655 Jy ! Component: 2700 - total flux cleaned = 0.000234534 Jy ! Component: 2750 - total flux cleaned = 0.000272875 Jy ! Component: 2800 - total flux cleaned = 0.000298432 Jy ! Component: 2850 - total flux cleaned = 0.000336444 Jy ! Component: 2900 - total flux cleaned = 0.000348948 Jy ! Component: 2950 - total flux cleaned = 0.000386408 Jy ! Component: 3000 - total flux cleaned = 0.000398877 Jy ! Component: 3050 - total flux cleaned = 0.000386607 Jy ! Component: 3100 - total flux cleaned = 0.000423397 Jy ! Component: 3150 - total flux cleaned = 0.000459957 Jy ! Component: 3200 - total flux cleaned = 0.000496248 Jy ! Component: 3250 - total flux cleaned = 0.000520284 Jy ! Component: 3300 - total flux cleaned = 0.000508355 Jy ! Component: 3350 - total flux cleaned = 0.000532215 Jy ! Component: 3400 - total flux cleaned = 0.000532237 Jy ! Component: 3450 - total flux cleaned = 0.000567669 Jy ! Component: 3500 - total flux cleaned = 0.000626229 Jy ! Component: 3550 - total flux cleaned = 0.000602831 Jy ! Component: 3600 - total flux cleaned = 0.00060286 Jy ! Component: 3650 - total flux cleaned = 0.000637545 Jy ! Component: 3700 - total flux cleaned = 0.00066056 Jy ! Component: 3750 - total flux cleaned = 0.000660542 Jy ! Component: 3800 - total flux cleaned = 0.000649173 Jy ! Component: 3850 - total flux cleaned = 0.000671976 Jy ! Component: 3900 - total flux cleaned = 0.000694643 Jy ! Component: 3950 - total flux cleaned = 0.000683388 Jy ! Component: 4000 - total flux cleaned = 0.000705829 Jy ! Component: 4050 - total flux cleaned = 0.000728168 Jy ! Total flux subtracted in 4096 components = 0.000739173 Jy ! Clean residual min=-0.000655 max=0.000730 Jy/beam ! Clean residual mean=-0.000004 rms=0.000183 Jy/beam ! Combined flux in latest and established models = 0.104492 Jy keep ! Adding 230 model components to the UV plane model. ! The established model now contains 313 components and 0.104492 Jy ![Exited script file: muppet] wmap "J2339-2310_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.965 x 6.593 at 1.825 degrees (North through East) ! Clean map min=-0.0026815 max=0.069006 Jy/beam ! Writing clean map to FITS file: J2339-2310_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0690059 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000174291 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.757722 0.757722 1.51544 3.03089 6.06178 12.1236 24.2471 48.4942 96.9885 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.069 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.965 x 6.593 at 1.825 degrees (North through East) ! Clean map min=-0.0026815 max=0.069006 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2339-2310_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:38:15 2017