! Started logfile: J2333+3901_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:38:06 2017 obs J2333+3901_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J2333+3901_S_2014_01_04_pus_uva.fits ! AN table 1: 86 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.430556 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2333+3901 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 5332 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2333+3901_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 258 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 258 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 258 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 258 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.804810Jy sigma=0.011744 ! Fit after self-cal, rms=0.770805Jy sigma=0.011282 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.192 mas, bmaj=5.574 mas, bpa=-12.01 degrees ! Estimated noise=1432.39 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.189794 Jy ! Component: 100 - total flux cleaned = 0.244341 Jy ! Total flux subtracted in 100 components = 0.244341 Jy ! Clean residual min=-0.046571 max=0.088813 Jy/beam ! Clean residual mean=-0.000009 rms=0.015237 Jy/beam ! Combined flux in latest and established models = 0.244341 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.244341 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180902Jy sigma=0.002685 ! Fit after self-cal, rms=0.180616Jy sigma=0.002684 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.665 mas, bmaj=6.46 mas, bpa=-12.42 degrees ! Estimated noise=709.982 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-20.5, -38.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.104189 Jy ! Component: 100 - total flux cleaned = 0.152609 Jy ! Component: 150 - total flux cleaned = 0.186395 Jy ! Component: 200 - total flux cleaned = 0.212189 Jy ! Total flux subtracted in 200 components = 0.212189 Jy ! Clean residual min=-0.028484 max=0.050446 Jy/beam ! Clean residual mean=0.000007 rms=0.009161 Jy/beam ! Combined flux in latest and established models = 0.45653 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 53 components and 0.45653 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116640Jy sigma=0.001568 ! Fit after self-cal, rms=0.101732Jy sigma=0.001330 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00* KP 1.00* LA 0.95 ! MK 1.02 NL 0.91 OV 0.89 PT 1.11 ! SC 0.88 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00* KP 1.00* LA 0.93 ! MK 1.04 NL 0.96 OV 0.94 PT 1.06 ! SC 0.92 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* KP 1.00* LA 0.78 ! MK 1.17 NL 0.99 OV 0.86 PT 1.02 ! SC 0.89 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 1.00* KP 1.00* LA 0.86 ! MK 1.30 NL 1.02 OV 0.95 PT 1.08 ! SC 0.86 ! ! ! Fit before self-cal, rms=0.101732Jy sigma=0.001330 ! Fit after self-cal, rms=0.084208Jy sigma=0.001183 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.717 mas, bmaj=6.473 mas, bpa=-8.433 degrees ! Estimated noise=670.093 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0183351 Jy ! Component: 100 - total flux cleaned = 0.0236566 Jy ! Component: 150 - total flux cleaned = 0.0273272 Jy ! Component: 200 - total flux cleaned = 0.0280778 Jy ! Total flux subtracted in 200 components = 0.0280778 Jy ! Clean residual min=-0.014282 max=0.015836 Jy/beam ! Clean residual mean=0.000012 rms=0.003804 Jy/beam ! Combined flux in latest and established models = 0.484608 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 77 components and 0.484608 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073689Jy sigma=0.000987 ! Fit after self-cal, rms=0.072341Jy sigma=0.000964 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072341Jy sigma=0.000964 ! Fit after self-cal, rms=0.070839Jy sigma=0.000949 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.736 mas, bmaj=6.475 mas, bpa=-7.741 degrees ! Estimated noise=657.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00489774 Jy ! Component: 100 - total flux cleaned = 0.00565657 Jy ! Component: 150 - total flux cleaned = 0.00408544 Jy ! Component: 200 - total flux cleaned = 0.0027708 Jy ! Total flux subtracted in 200 components = 0.0027708 Jy ! Clean residual min=-0.010572 max=0.009872 Jy/beam ! Clean residual mean=0.000001 rms=0.002857 Jy/beam ! Combined flux in latest and established models = 0.487379 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 96 components and 0.487379 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069184Jy sigma=0.000918 ! Fit after self-cal, rms=0.069131Jy sigma=0.000915 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000543422 Jy ! Component: 100 - total flux cleaned = 0.000730238 Jy ! Component: 150 - total flux cleaned = 0.00037641 Jy ! Component: 200 - total flux cleaned = -0.000329527 Jy ! Total flux subtracted in 200 components = -0.000329527 Jy ! Clean residual min=-0.009941 max=0.008976 Jy/beam ! Clean residual mean=0.000004 rms=0.002711 Jy/beam ! Combined flux in latest and established models = 0.487049 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 113 components and 0.487049 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068565Jy sigma=0.000908 ! Fit after self-cal, rms=0.068564Jy sigma=0.000906 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068564Jy sigma=0.000906 ! Fit after self-cal, rms=0.067874Jy sigma=0.000904 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.739 mas, bmaj=6.485 mas, bpa=-7.631 degrees ! Estimated noise=651.095 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.08162e-05 Jy ! Component: 100 - total flux cleaned = 0.000256509 Jy ! Component: 150 - total flux cleaned = 0.000432524 Jy ! Component: 200 - total flux cleaned = 0.000510728 Jy ! Total flux subtracted in 200 components = 0.000510728 Jy ! Clean residual min=-0.009168 max=0.008294 Jy/beam ! Clean residual mean=0.000001 rms=0.002529 Jy/beam ! Combined flux in latest and established models = 0.48756 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 127 components and 0.48756 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067505Jy sigma=0.000900 ! Fit after self-cal, rms=0.067537Jy sigma=0.000899 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000329856 Jy ! Component: 100 - total flux cleaned = 0.00113362 Jy ! Component: 150 - total flux cleaned = 0.00138158 Jy ! Component: 200 - total flux cleaned = 0.00133059 Jy ! Total flux subtracted in 200 components = 0.00133059 Jy ! Clean residual min=-0.008880 max=0.007978 Jy/beam ! Clean residual mean=0.000001 rms=0.002490 Jy/beam ! Combined flux in latest and established models = 0.488891 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 138 components and 0.488891 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067345Jy sigma=0.000897 ! Fit after self-cal, rms=0.067376Jy sigma=0.000897 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067376Jy sigma=0.000897 ! Fit after self-cal, rms=0.067284Jy sigma=0.000896 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.266 mas, bmaj=11.58 mas, bpa=1.351 degrees ! Estimated noise=730.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00067313 Jy ! Component: 100 - total flux cleaned = 0.00106558 Jy ! Component: 150 - total flux cleaned = 0.00126207 Jy ! Component: 200 - total flux cleaned = 0.00141695 Jy ! Total flux subtracted in 200 components = 0.00141695 Jy ! Clean residual min=-0.013827 max=0.011694 Jy/beam ! Clean residual mean=-0.000004 rms=0.004167 Jy/beam ! Combined flux in latest and established models = 0.490308 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 144 components and 0.490308 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067276Jy sigma=0.000897 ! Fit after self-cal, rms=0.067319Jy sigma=0.000896 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000737154 Jy ! Component: 100 - total flux cleaned = -0.000424537 Jy ! Component: 150 - total flux cleaned = -0.000140675 Jy ! Component: 200 - total flux cleaned = -0.000274794 Jy ! Total flux subtracted in 200 components = -0.000274794 Jy ! Clean residual min=-0.014011 max=0.011491 Jy/beam ! Clean residual mean=-0.000005 rms=0.004115 Jy/beam ! Combined flux in latest and established models = 0.490033 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 146 components and 0.490033 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067342Jy sigma=0.000896 ! Fit after self-cal, rms=0.067385Jy sigma=0.000896 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.744 mas, bmaj=6.493 mas, bpa=-7.649 degrees ! Estimated noise=649.01 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.744 x 6.493 at -7.649 degrees (North through East) ! Clean map min=-0.009417 max=0.2194 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.24 mas, bmaj=5.56 mas, bpa=-6.268 degrees ! Estimated noise=1321.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.186253 Jy ! Component: 100 - total flux cleaned = 0.275896 Jy ! Component: 150 - total flux cleaned = 0.329502 Jy ! Component: 200 - total flux cleaned = 0.365251 Jy ! Total flux subtracted in 200 components = 0.365251 Jy ! Clean residual min=-0.018763 max=0.025141 Jy/beam ! Clean residual mean=0.000025 rms=0.005485 Jy/beam ! Combined flux in latest and established models = 0.36525 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 0.36525 Jy ! Inverting map and beam ! Estimated beam: bmin=3.744 mas, bmaj=6.493 mas, bpa=-7.649 degrees ! Estimated noise=649.01 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0322932 Jy ! Component: 100 - total flux cleaned = 0.0532779 Jy ! Component: 150 - total flux cleaned = 0.0689685 Jy ! Component: 200 - total flux cleaned = 0.0810897 Jy ! Total flux subtracted in 200 components = 0.0810897 Jy ! Clean residual min=-0.013445 max=0.013644 Jy/beam ! Clean residual mean=-0.000008 rms=0.003501 Jy/beam ! Combined flux in latest and established models = 0.44634 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 74 components and 0.44634 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.266 mas, bmaj=11.58 mas, bpa=1.351 degrees ! Estimated noise=730.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0126355 Jy ! Component: 100 - total flux cleaned = 0.0197111 Jy ! Component: 150 - total flux cleaned = 0.0246565 Jy ! Component: 200 - total flux cleaned = 0.0290653 Jy ! Total flux subtracted in 200 components = 0.0290653 Jy ! Clean residual min=-0.016074 max=0.014122 Jy/beam ! Clean residual mean=-0.000012 rms=0.004590 Jy/beam ! Combined flux in latest and established models = 0.475405 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00287707 Jy ! Component: 100 - total flux cleaned = 0.00499349 Jy ! Component: 150 - total flux cleaned = 0.00653245 Jy ! Component: 200 - total flux cleaned = 0.00820354 Jy ! Total flux subtracted in 200 components = 0.00820354 Jy ! Clean residual min=-0.015042 max=0.012578 Jy/beam ! Clean residual mean=-0.000010 rms=0.004233 Jy/beam ! Combined flux in latest and established models = 0.483609 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 123 components and 0.483609 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.744 mas, bmaj=6.493 mas, bpa=-7.649 degrees ! Estimated noise=649.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00344978 Jy ! Component: 100 - total flux cleaned = 0.00604146 Jy ! Component: 150 - total flux cleaned = 0.00737012 Jy ! Component: 200 - total flux cleaned = 0.00838574 Jy ! Total flux subtracted in 200 components = 0.00838574 Jy ! Clean residual min=-0.010249 max=0.009439 Jy/beam ! Clean residual mean=-0.000001 rms=0.002510 Jy/beam ! Combined flux in latest and established models = 0.491995 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 135 components and 0.491995 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068471Jy sigma=0.000907 ! Fit after self-cal, rms=0.068373Jy sigma=0.000903 wmodel J2333+3901_S_2014_01_04_pus_map.mod ! Writing 135 model components to file: J2333+3901_S_2014_01_04_pus_map.mod wobs J2333+3901_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J2333+3901_S_2014_01_04_pus_uvs.fits wwins J2333+3901_S_2014_01_04_pus_map.win ! wwins: Wrote 2 windows to J2333+3901_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00206553 Jy ! Component: 100 - total flux cleaned = -0.00191272 Jy ! Component: 150 - total flux cleaned = -0.00191695 Jy ! Component: 200 - total flux cleaned = -0.00191937 Jy ! Component: 250 - total flux cleaned = -0.00192342 Jy ! Component: 300 - total flux cleaned = -0.00202196 Jy ! Component: 350 - total flux cleaned = -0.00259348 Jy ! Component: 400 - total flux cleaned = -0.00304247 Jy ! Component: 450 - total flux cleaned = -0.00320915 Jy ! Component: 500 - total flux cleaned = -0.00328748 Jy ! Component: 550 - total flux cleaned = -0.00351299 Jy ! Component: 600 - total flux cleaned = -0.00365585 Jy ! Component: 650 - total flux cleaned = -0.00372168 Jy ! Component: 700 - total flux cleaned = -0.00378295 Jy ! Component: 750 - total flux cleaned = -0.00378274 Jy ! Component: 800 - total flux cleaned = -0.00389892 Jy ! Component: 850 - total flux cleaned = -0.00378822 Jy ! Component: 900 - total flux cleaned = -0.0039478 Jy ! Component: 950 - total flux cleaned = -0.00379645 Jy ! Component: 1000 - total flux cleaned = -0.00389522 Jy ! Component: 1050 - total flux cleaned = -0.0038953 Jy ! Component: 1100 - total flux cleaned = -0.00398486 Jy ! Component: 1150 - total flux cleaned = -0.00419822 Jy ! Component: 1200 - total flux cleaned = -0.00431926 Jy ! Component: 1250 - total flux cleaned = -0.0043551 Jy ! Component: 1300 - total flux cleaned = -0.00446822 Jy ! Component: 1350 - total flux cleaned = -0.00453992 Jy ! Component: 1400 - total flux cleaned = -0.00475118 Jy ! Component: 1450 - total flux cleaned = -0.00495536 Jy ! Component: 1500 - total flux cleaned = -0.00518544 Jy ! Component: 1550 - total flux cleaned = -0.00540859 Jy ! Component: 1600 - total flux cleaned = -0.0056539 Jy ! Component: 1650 - total flux cleaned = -0.00586226 Jy ! Component: 1700 - total flux cleaned = -0.00606479 Jy ! Component: 1750 - total flux cleaned = -0.00623368 Jy ! Component: 1800 - total flux cleaned = -0.00650699 Jy ! Component: 1850 - total flux cleaned = -0.00666644 Jy ! Component: 1900 - total flux cleaned = -0.00676977 Jy ! Component: 1950 - total flux cleaned = -0.00686972 Jy ! Component: 2000 - total flux cleaned = -0.00696755 Jy ! Component: 2050 - total flux cleaned = -0.00706238 Jy ! Component: 2100 - total flux cleaned = -0.00713215 Jy ! Component: 2150 - total flux cleaned = -0.00717809 Jy ! Component: 2200 - total flux cleaned = -0.00724523 Jy ! Component: 2250 - total flux cleaned = -0.0073109 Jy ! Component: 2300 - total flux cleaned = -0.00733161 Jy ! Component: 2350 - total flux cleaned = -0.00735236 Jy ! Component: 2400 - total flux cleaned = -0.00735226 Jy ! Component: 2450 - total flux cleaned = -0.00737228 Jy ! Component: 2500 - total flux cleaned = -0.00733285 Jy ! Component: 2550 - total flux cleaned = -0.00735236 Jy ! Component: 2600 - total flux cleaned = -0.007352 Jy ! Component: 2650 - total flux cleaned = -0.00735167 Jy ! Component: 2700 - total flux cleaned = -0.00735135 Jy ! Component: 2750 - total flux cleaned = -0.00735123 Jy ! Component: 2800 - total flux cleaned = -0.00735131 Jy ! Component: 2850 - total flux cleaned = -0.00735137 Jy ! Component: 2900 - total flux cleaned = -0.00735135 Jy ! Component: 2950 - total flux cleaned = -0.00736827 Jy ! Component: 3000 - total flux cleaned = -0.00740142 Jy ! Component: 3050 - total flux cleaned = -0.00736854 Jy ! Component: 3100 - total flux cleaned = -0.0073847 Jy ! Component: 3150 - total flux cleaned = -0.00740068 Jy ! Component: 3200 - total flux cleaned = -0.00735365 Jy ! Component: 3250 - total flux cleaned = -0.00733839 Jy ! Component: 3300 - total flux cleaned = -0.00735378 Jy ! Component: 3350 - total flux cleaned = -0.00730791 Jy ! Component: 3400 - total flux cleaned = -0.00732297 Jy ! Component: 3450 - total flux cleaned = -0.00727786 Jy ! Component: 3500 - total flux cleaned = -0.00724821 Jy ! Component: 3550 - total flux cleaned = -0.0072483 Jy ! Component: 3600 - total flux cleaned = -0.00723357 Jy ! Component: 3650 - total flux cleaned = -0.00721896 Jy ! Component: 3700 - total flux cleaned = -0.00717549 Jy ! Component: 3750 - total flux cleaned = -0.00711806 Jy ! Component: 3800 - total flux cleaned = -0.00707529 Jy ! Component: 3850 - total flux cleaned = -0.0070186 Jy ! Component: 3900 - total flux cleaned = -0.00696222 Jy ! Component: 3950 - total flux cleaned = -0.00689204 Jy ! Component: 4000 - total flux cleaned = -0.00680807 Jy ! Component: 4050 - total flux cleaned = -0.00673831 Jy ! Total flux subtracted in 4096 components = -0.00664107 Jy ! Clean residual min=-0.000807 max=0.000740 Jy/beam ! Clean residual mean=-0.000003 rms=0.000238 Jy/beam ! Combined flux in latest and established models = 0.485354 Jy keep ! Adding 275 model components to the UV plane model. ! The established model now contains 410 components and 0.485354 Jy ![Exited script file: muppet] wmap "J2333+3901_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.744 x 6.493 at -7.649 degrees (North through East) ! Clean map min=-0.0046914 max=0.21762 Jy/beam ! Writing clean map to FITS file: J2333+3901_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.217619 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000225156 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.310391 0.310391 0.620781 1.24156 2.48313 4.96625 9.9325 19.865 39.73 79.46 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.217 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.744 x 6.493 at -7.649 degrees (North through East) ! Clean map min=-0.0046914 max=0.21762 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2333+3901_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:38:10 2017