! Started logfile: J2330+3155_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:38:01 2017 obs J2330+3155_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J2330+3155_S_2014_01_04_pus_uva.fits ! AN table 1: 75 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.372222 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2330+3155 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 4020 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2330+3155_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 264 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 264 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 264 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 264 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.800018Jy sigma=0.011429 ! Fit after self-cal, rms=0.724275Jy sigma=0.010675 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.944 mas, bmaj=5.572 mas, bpa=-16.22 degrees ! Estimated noise=1156.64 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.215862 Jy ! Component: 100 - total flux cleaned = 0.302645 Jy ! Total flux subtracted in 100 components = 0.302645 Jy ! Clean residual min=-0.060166 max=0.124190 Jy/beam ! Clean residual mean=0.000082 rms=0.019900 Jy/beam ! Combined flux in latest and established models = 0.302645 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.302645 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.216710Jy sigma=0.003072 ! Fit after self-cal, rms=0.216598Jy sigma=0.003064 ! Inverting map ! Added new window around map position (7.5, 21). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.104724 Jy ! Component: 100 - total flux cleaned = 0.158902 Jy ! Total flux subtracted in 100 components = 0.158902 Jy ! Clean residual min=-0.037461 max=0.042825 Jy/beam ! Clean residual mean=0.000046 rms=0.011488 Jy/beam ! Combined flux in latest and established models = 0.461547 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 21 components and 0.461547 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.151271Jy sigma=0.002086 ! Fit after self-cal, rms=0.147890Jy sigma=0.002036 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.523 mas, bmaj=6.422 mas, bpa=-12.12 degrees ! Estimated noise=801.257 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0612759 Jy ! Component: 100 - total flux cleaned = 0.105047 Jy ! Component: 150 - total flux cleaned = 0.13841 Jy ! Component: 200 - total flux cleaned = 0.164501 Jy ! Total flux subtracted in 200 components = 0.164501 Jy ! Clean residual min=-0.029898 max=0.038579 Jy/beam ! Clean residual mean=-0.000005 rms=0.009389 Jy/beam ! Combined flux in latest and established models = 0.626048 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 48 components and 0.626048 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110314Jy sigma=0.001451 ! Fit after self-cal, rms=0.108572Jy sigma=0.001431 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00* KP 1.00* LA 0.91 ! MK 1.04 NL 1.01 OV 0.93 PT 0.90 ! SC 1.12 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.00* KP 1.00* LA 0.89 ! MK 1.03 NL 1.10 OV 0.96 PT 0.89 ! SC 1.13 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* KP 1.00* LA 0.73 ! MK 1.02 NL 1.03 OV 0.90 PT 0.89 ! SC 1.11 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.24 FD 1.00* KP 1.00* LA 0.80 ! MK 1.04 NL 1.13 OV 0.95 PT 0.95 ! SC 1.07 ! ! ! Fit before self-cal, rms=0.108572Jy sigma=0.001431 ! Fit after self-cal, rms=0.091342Jy sigma=0.001153 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.623 mas, bmaj=6.657 mas, bpa=-12.48 degrees ! Estimated noise=789.082 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00416849 Jy ! Component: 100 - total flux cleaned = -0.00384068 Jy ! Component: 150 - total flux cleaned = -0.00189404 Jy ! Component: 200 - total flux cleaned = -0.000507458 Jy ! Total flux subtracted in 200 components = -0.000507458 Jy ! Clean residual min=-0.021378 max=0.023384 Jy/beam ! Clean residual mean=-0.000036 rms=0.005325 Jy/beam ! Combined flux in latest and established models = 0.625541 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 62 components and 0.625541 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086829Jy sigma=0.001095 ! Fit after self-cal, rms=0.086432Jy sigma=0.001088 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086432Jy sigma=0.001088 ! Fit after self-cal, rms=0.085791Jy sigma=0.001038 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.631 mas, bmaj=6.527 mas, bpa=-10.89 degrees ! Estimated noise=785.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00211138 Jy ! Component: 100 - total flux cleaned = 0.00192356 Jy ! Component: 150 - total flux cleaned = 0.00118954 Jy ! Component: 200 - total flux cleaned = 0.000532073 Jy ! Total flux subtracted in 200 components = 0.000532073 Jy ! Clean residual min=-0.016441 max=0.018847 Jy/beam ! Clean residual mean=-0.000015 rms=0.004231 Jy/beam ! Combined flux in latest and established models = 0.626073 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 78 components and 0.626073 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084458Jy sigma=0.001025 ! Fit after self-cal, rms=0.084471Jy sigma=0.001024 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2, 122.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0146764 Jy ! Component: 100 - total flux cleaned = 0.0171407 Jy ! Component: 150 - total flux cleaned = 0.0193131 Jy ! Component: 200 - total flux cleaned = 0.0213176 Jy ! Total flux subtracted in 200 components = 0.0213176 Jy ! Clean residual min=-0.014272 max=0.012524 Jy/beam ! Clean residual mean=-0.000019 rms=0.003368 Jy/beam ! Combined flux in latest and established models = 0.64739 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 111 components and 0.64739 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080110Jy sigma=0.000973 ! Fit after self-cal, rms=0.079366Jy sigma=0.000965 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079366Jy sigma=0.000965 ! Fit after self-cal, rms=0.077683Jy sigma=0.000958 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.636 mas, bmaj=6.543 mas, bpa=-10.62 degrees ! Estimated noise=775.721 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00761102 Jy ! Component: 100 - total flux cleaned = 0.00846956 Jy ! Component: 150 - total flux cleaned = 0.00847724 Jy ! Component: 200 - total flux cleaned = 0.00820991 Jy ! Total flux subtracted in 200 components = 0.00820991 Jy ! Clean residual min=-0.011153 max=0.010442 Jy/beam ! Clean residual mean=-0.000017 rms=0.002745 Jy/beam ! Combined flux in latest and established models = 0.6556 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 123 components and 0.655601 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076296Jy sigma=0.000943 ! Fit after self-cal, rms=0.075988Jy sigma=0.000940 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0015904 Jy ! Component: 100 - total flux cleaned = 0.00148146 Jy ! Component: 150 - total flux cleaned = 0.00136091 Jy ! Component: 200 - total flux cleaned = 0.00125993 Jy ! Total flux subtracted in 200 components = 0.00125993 Jy ! Clean residual min=-0.010384 max=0.009814 Jy/beam ! Clean residual mean=-0.000011 rms=0.002547 Jy/beam ! Combined flux in latest and established models = 0.65686 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 128 components and 0.656861 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075465Jy sigma=0.000934 ! Fit after self-cal, rms=0.075349Jy sigma=0.000933 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075349Jy sigma=0.000933 ! Fit after self-cal, rms=0.074974Jy sigma=0.000929 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.275 mas, bmaj=11.19 mas, bpa=3.311 degrees ! Estimated noise=837.195 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00170621 Jy ! Component: 100 - total flux cleaned = 0.00329687 Jy ! Component: 150 - total flux cleaned = 0.00406834 Jy ! Component: 200 - total flux cleaned = 0.0042139 Jy ! Total flux subtracted in 200 components = 0.0042139 Jy ! Clean residual min=-0.010166 max=0.008311 Jy/beam ! Clean residual mean=-0.000023 rms=0.002651 Jy/beam ! Combined flux in latest and established models = 0.661074 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 140 components and 0.661074 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074812Jy sigma=0.000925 ! Fit after self-cal, rms=0.074656Jy sigma=0.000924 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000731418 Jy ! Component: 100 - total flux cleaned = 0.00115844 Jy ! Component: 150 - total flux cleaned = 0.00137986 Jy ! Component: 200 - total flux cleaned = 0.00144647 Jy ! Total flux subtracted in 200 components = 0.00144647 Jy ! Clean residual min=-0.009433 max=0.008010 Jy/beam ! Clean residual mean=-0.000019 rms=0.002506 Jy/beam ! Combined flux in latest and established models = 0.662521 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 142 components and 0.662521 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074669Jy sigma=0.000923 ! Fit after self-cal, rms=0.074589Jy sigma=0.000922 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.635 mas, bmaj=6.548 mas, bpa=-10.44 degrees ! Estimated noise=772.921 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.635 x 6.548 at -10.44 degrees (North through East) ! Clean map min=-0.008702 max=0.28381 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.01 mas, bmaj=5.602 mas, bpa=-14.45 degrees ! Estimated noise=1160.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.227299 Jy ! Component: 100 - total flux cleaned = 0.334499 Jy ! Component: 150 - total flux cleaned = 0.405583 Jy ! Component: 200 - total flux cleaned = 0.454411 Jy ! Total flux subtracted in 200 components = 0.454411 Jy ! Clean residual min=-0.030335 max=0.039083 Jy/beam ! Clean residual mean=0.000058 rms=0.009104 Jy/beam ! Combined flux in latest and established models = 0.454411 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.454411 Jy ! Inverting map and beam ! Estimated beam: bmin=3.635 mas, bmaj=6.548 mas, bpa=-10.44 degrees ! Estimated noise=772.921 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0483683 Jy ! Component: 100 - total flux cleaned = 0.079724 Jy ! Component: 150 - total flux cleaned = 0.103408 Jy ! Component: 200 - total flux cleaned = 0.122205 Jy ! Total flux subtracted in 200 components = 0.122205 Jy ! Clean residual min=-0.016239 max=0.017189 Jy/beam ! Clean residual mean=0.000009 rms=0.004660 Jy/beam ! Combined flux in latest and established models = 0.576616 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 57 components and 0.576616 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.275 mas, bmaj=11.19 mas, bpa=3.311 degrees ! Estimated noise=837.195 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0236174 Jy ! Component: 100 - total flux cleaned = 0.039661 Jy ! Component: 150 - total flux cleaned = 0.0508936 Jy ! Component: 200 - total flux cleaned = 0.0588827 Jy ! Total flux subtracted in 200 components = 0.0588827 Jy ! Clean residual min=-0.012713 max=0.011005 Jy/beam ! Clean residual mean=-0.000017 rms=0.003031 Jy/beam ! Combined flux in latest and established models = 0.635498 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00598955 Jy ! Component: 100 - total flux cleaned = 0.0106448 Jy ! Component: 150 - total flux cleaned = 0.0138069 Jy ! Component: 200 - total flux cleaned = 0.0158236 Jy ! Total flux subtracted in 200 components = 0.0158236 Jy ! Clean residual min=-0.010061 max=0.007914 Jy/beam ! Clean residual mean=-0.000025 rms=0.002373 Jy/beam ! Combined flux in latest and established models = 0.651322 Jy ! Adding 61 model components to the UV plane model. ! The established model now contains 109 components and 0.651322 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.635 mas, bmaj=6.548 mas, bpa=-10.44 degrees ! Estimated noise=772.921 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000135681 Jy ! Component: 100 - total flux cleaned = 0.00195727 Jy ! Component: 150 - total flux cleaned = 0.00369452 Jy ! Component: 200 - total flux cleaned = 0.00417434 Jy ! Total flux subtracted in 200 components = 0.00417434 Jy ! Clean residual min=-0.009156 max=0.007229 Jy/beam ! Clean residual mean=-0.000012 rms=0.002131 Jy/beam ! Combined flux in latest and established models = 0.655496 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 121 components and 0.655496 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075640Jy sigma=0.000923 ! Fit after self-cal, rms=0.074876Jy sigma=0.000914 wmodel J2330+3155_S_2014_01_04_pus_map.mod ! Writing 121 model components to file: J2330+3155_S_2014_01_04_pus_map.mod wobs J2330+3155_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J2330+3155_S_2014_01_04_pus_uvs.fits wwins J2330+3155_S_2014_01_04_pus_map.win ! wwins: Wrote 4 windows to J2330+3155_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00272983 Jy ! Component: 100 - total flux cleaned = -0.00297925 Jy ! Component: 150 - total flux cleaned = -0.00331343 Jy ! Component: 200 - total flux cleaned = -0.00341992 Jy ! Component: 250 - total flux cleaned = -0.00361935 Jy ! Component: 300 - total flux cleaned = -0.00352663 Jy ! Component: 350 - total flux cleaned = -0.00335131 Jy ! Component: 400 - total flux cleaned = -0.00286017 Jy ! Component: 450 - total flux cleaned = -0.00255078 Jy ! Component: 500 - total flux cleaned = -0.00232986 Jy ! Component: 550 - total flux cleaned = -0.00226062 Jy ! Component: 600 - total flux cleaned = -0.00226282 Jy ! Component: 650 - total flux cleaned = -0.00219889 Jy ! Component: 700 - total flux cleaned = -0.00232675 Jy ! Component: 750 - total flux cleaned = -0.00232761 Jy ! Component: 800 - total flux cleaned = -0.00238785 Jy ! Component: 850 - total flux cleaned = -0.00250169 Jy ! Component: 900 - total flux cleaned = -0.00255528 Jy ! Component: 950 - total flux cleaned = -0.00276456 Jy ! Component: 1000 - total flux cleaned = -0.00281628 Jy ! Component: 1050 - total flux cleaned = -0.00326406 Jy ! Component: 1100 - total flux cleaned = -0.00369879 Jy ! Component: 1150 - total flux cleaned = -0.00402752 Jy ! Component: 1200 - total flux cleaned = -0.00434693 Jy ! Component: 1250 - total flux cleaned = -0.00465847 Jy ! Component: 1300 - total flux cleaned = -0.00491945 Jy ! Component: 1350 - total flux cleaned = -0.00513044 Jy ! Component: 1400 - total flux cleaned = -0.00533589 Jy ! Component: 1450 - total flux cleaned = -0.00545606 Jy ! Component: 1500 - total flux cleaned = -0.00553432 Jy ! Component: 1550 - total flux cleaned = -0.0057636 Jy ! Component: 1600 - total flux cleaned = -0.00572495 Jy ! Component: 1650 - total flux cleaned = -0.00594434 Jy ! Component: 1700 - total flux cleaned = -0.00601454 Jy ! Component: 1750 - total flux cleaned = -0.00612029 Jy ! Component: 1800 - total flux cleaned = -0.00618951 Jy ! Component: 1850 - total flux cleaned = -0.00622375 Jy ! Component: 1900 - total flux cleaned = -0.0063233 Jy ! Component: 1950 - total flux cleaned = -0.00638786 Jy ! Component: 2000 - total flux cleaned = -0.00635673 Jy ! Component: 2050 - total flux cleaned = -0.00654524 Jy ! Component: 2100 - total flux cleaned = -0.00651384 Jy ! Component: 2150 - total flux cleaned = -0.00654439 Jy ! Component: 2200 - total flux cleaned = -0.00660361 Jy ! Component: 2250 - total flux cleaned = -0.00666263 Jy ! Component: 2300 - total flux cleaned = -0.00674923 Jy ! Component: 2350 - total flux cleaned = -0.00686129 Jy ! Component: 2400 - total flux cleaned = -0.00694444 Jy ! Component: 2450 - total flux cleaned = -0.00699832 Jy ! Component: 2500 - total flux cleaned = -0.00705159 Jy ! Component: 2550 - total flux cleaned = -0.0071308 Jy ! Component: 2600 - total flux cleaned = -0.00718217 Jy ! Component: 2650 - total flux cleaned = -0.0073089 Jy ! Component: 2700 - total flux cleaned = -0.00730875 Jy ! Component: 2750 - total flux cleaned = -0.00730854 Jy ! Component: 2800 - total flux cleaned = -0.00735688 Jy ! Component: 2850 - total flux cleaned = -0.00730894 Jy ! Component: 2900 - total flux cleaned = -0.00728564 Jy ! Component: 2950 - total flux cleaned = -0.00726246 Jy ! Component: 3000 - total flux cleaned = -0.00726252 Jy ! Component: 3050 - total flux cleaned = -0.00717258 Jy ! Component: 3100 - total flux cleaned = -0.00712864 Jy ! Component: 3150 - total flux cleaned = -0.00717259 Jy ! Component: 3200 - total flux cleaned = -0.00715058 Jy ! Component: 3250 - total flux cleaned = -0.00719289 Jy ! Component: 3300 - total flux cleaned = -0.00715082 Jy ! Component: 3350 - total flux cleaned = -0.00717195 Jy ! Component: 3400 - total flux cleaned = -0.0071511 Jy ! Component: 3450 - total flux cleaned = -0.00711053 Jy ! Component: 3500 - total flux cleaned = -0.00713037 Jy ! Component: 3550 - total flux cleaned = -0.007051 Jy ! Component: 3600 - total flux cleaned = -0.00701179 Jy ! Component: 3650 - total flux cleaned = -0.00697321 Jy ! Component: 3700 - total flux cleaned = -0.00699248 Jy ! Component: 3750 - total flux cleaned = -0.00689783 Jy ! Component: 3800 - total flux cleaned = -0.00686056 Jy ! Component: 3850 - total flux cleaned = -0.00689782 Jy ! Component: 3900 - total flux cleaned = -0.00689776 Jy ! Component: 3950 - total flux cleaned = -0.0068615 Jy ! Component: 4000 - total flux cleaned = -0.00691596 Jy ! Component: 4050 - total flux cleaned = -0.00693395 Jy ! Total flux subtracted in 4096 components = -0.00689826 Jy ! Clean residual min=-0.000945 max=0.001156 Jy/beam ! Clean residual mean=-0.000003 rms=0.000294 Jy/beam ! Combined flux in latest and established models = 0.648598 Jy keep ! Adding 215 model components to the UV plane model. ! The established model now contains 336 components and 0.648598 Jy ![Exited script file: muppet] wmap "J2330+3155_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.635 x 6.548 at -10.44 degrees (North through East) ! Clean map min=-0.0038405 max=0.28974 Jy/beam ! Writing clean map to FITS file: J2330+3155_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.28974 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000288054 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.298255 0.298255 0.59651 1.19302 2.38604 4.77208 9.54416 19.0883 38.1766 76.3532 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.289 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.635 x 6.548 at -10.44 degrees (North through East) ! Clean map min=-0.0038405 max=0.28974 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2330+3155_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:38:06 2017