! Started logfile: J2329+0834_S_2014_08_05_pus_uvs.log on Sun Nov 13 17:41:52 2016 obs J2329+0834_S_2014_08_05_pus_uva.fits ! Reading UV FITS file: J2329+0834_S_2014_08_05_pus_uva.fits ! AN table 1: 92 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.688889 visibilities/baseline/integration-bin. ! Found source: J2329+0834 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 360 lines of history. ! ! Reading 11408 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2329+0834_S_2014_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 152 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 152 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 152 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 152 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.921785Jy sigma=0.010299 ! Fit after self-cal, rms=0.915239Jy sigma=0.010232 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.239 mas, bmaj=8.737 mas, bpa=20.41 degrees ! Estimated noise=787.523 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0666617 Jy ! Component: 100 - total flux cleaned = 0.0812232 Jy ! Total flux subtracted in 100 components = 0.0812232 Jy ! Clean residual min=-0.002798 max=0.004113 Jy/beam ! Clean residual mean=-0.000033 rms=0.000794 Jy/beam ! Combined flux in latest and established models = 0.0812232 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.0812232 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073959Jy sigma=0.000771 ! Fit after self-cal, rms=0.073954Jy sigma=0.000771 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.04 mas, bmaj=9.657 mas, bpa=18.41 degrees ! Estimated noise=601.415 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00517225 Jy ! Component: 100 - total flux cleaned = 0.00762954 Jy ! Component: 150 - total flux cleaned = 0.00909566 Jy ! Component: 200 - total flux cleaned = 0.0100237 Jy ! Total flux subtracted in 200 components = 0.0100237 Jy ! Clean residual min=-0.002136 max=0.002277 Jy/beam ! Clean residual mean=-0.000011 rms=0.000569 Jy/beam ! Combined flux in latest and established models = 0.0912469 Jy ! Performing phase self-cal ! Adding 55 model components to the UV plane model. ! The established model now contains 57 components and 0.0912469 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073535Jy sigma=0.000768 ! Fit after self-cal, rms=0.073540Jy sigma=0.000768 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.90 HN 0.96 KP 1.11 ! LA 1.08 MK 1.00* NL 0.99 OV 1.02 ! PT 0.97 SC 1.03 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.05 HN 1.11 KP 1.00 ! LA 1.07 MK 1.00* NL 0.99 OV 1.03 ! PT 1.04 SC 1.08 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.18 HN 1.02 KP 0.91 ! LA 0.83 MK 1.00* NL 0.99 OV 0.93 ! PT 1.00 SC 1.01 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.08 HN 1.02 KP 0.89 ! LA 0.81 MK 1.00* NL 1.04 OV 0.99 ! PT 1.00 SC 0.97 ! ! ! Fit before self-cal, rms=0.073540Jy sigma=0.000768 ! Fit after self-cal, rms=0.071835Jy sigma=0.000761 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.067 mas, bmaj=9.712 mas, bpa=18.38 degrees ! Estimated noise=601.196 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000577963 Jy ! Component: 100 - total flux cleaned = -0.000673038 Jy ! Component: 150 - total flux cleaned = -0.000687446 Jy ! Component: 200 - total flux cleaned = -0.000712745 Jy ! Total flux subtracted in 200 components = -0.000712745 Jy ! Clean residual min=-0.001916 max=0.001642 Jy/beam ! Clean residual mean=-0.000007 rms=0.000450 Jy/beam ! Combined flux in latest and established models = 0.0905342 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 66 components and 0.0905342 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071828Jy sigma=0.000761 ! Fit after self-cal, rms=0.071828Jy sigma=0.000761 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071828Jy sigma=0.000761 ! Fit after self-cal, rms=0.071642Jy sigma=0.000760 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.084 mas, bmaj=9.74 mas, bpa=18.41 degrees ! Estimated noise=600.127 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00058682 Jy ! Component: 100 - total flux cleaned = -0.000780741 Jy ! Component: 150 - total flux cleaned = -0.000826134 Jy ! Component: 200 - total flux cleaned = -0.000868124 Jy ! Total flux subtracted in 200 components = -0.000868124 Jy ! Clean residual min=-0.001546 max=0.001445 Jy/beam ! Clean residual mean=-0.000002 rms=0.000405 Jy/beam ! Combined flux in latest and established models = 0.089666 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 74 components and 0.089666 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071636Jy sigma=0.000759 ! Fit after self-cal, rms=0.071638Jy sigma=0.000759 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000114221 Jy ! Component: 100 - total flux cleaned = -0.000132834 Jy ! Component: 150 - total flux cleaned = -0.000141747 Jy ! Component: 200 - total flux cleaned = -0.000150285 Jy ! Total flux subtracted in 200 components = -0.000150285 Jy ! Clean residual min=-0.001536 max=0.001449 Jy/beam ! Clean residual mean=-0.000003 rms=0.000404 Jy/beam ! Combined flux in latest and established models = 0.0895157 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 83 components and 0.0895157 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071635Jy sigma=0.000759 ! Fit after self-cal, rms=0.071635Jy sigma=0.000759 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071635Jy sigma=0.000759 ! Fit after self-cal, rms=0.071625Jy sigma=0.000759 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.094 mas, bmaj=9.755 mas, bpa=18.4 degrees ! Estimated noise=599.424 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000420925 Jy ! Component: 100 - total flux cleaned = -0.000599499 Jy ! Component: 150 - total flux cleaned = -0.000670304 Jy ! Component: 200 - total flux cleaned = -0.00070195 Jy ! Total flux subtracted in 200 components = -0.00070195 Jy ! Clean residual min=-0.001501 max=0.001455 Jy/beam ! Clean residual mean=-0.000002 rms=0.000399 Jy/beam ! Combined flux in latest and established models = 0.0888138 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 86 components and 0.0888138 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071621Jy sigma=0.000759 ! Fit after self-cal, rms=0.071623Jy sigma=0.000759 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.27389e-05 Jy ! Component: 100 - total flux cleaned = -5.29621e-05 Jy ! Component: 150 - total flux cleaned = -5.30106e-05 Jy ! Component: 200 - total flux cleaned = -5.31993e-05 Jy ! Total flux subtracted in 200 components = -5.31993e-05 Jy ! Clean residual min=-0.001499 max=0.001455 Jy/beam ! Clean residual mean=-0.000002 rms=0.000399 Jy/beam ! Combined flux in latest and established models = 0.0887606 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 88 components and 0.0887606 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071622Jy sigma=0.000759 ! Fit after self-cal, rms=0.071621Jy sigma=0.000759 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071621Jy sigma=0.000759 ! Fit after self-cal, rms=0.071598Jy sigma=0.000759 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.281 mas, bmaj=11.76 mas, bpa=4.099 degrees ! Estimated noise=654.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000331762 Jy ! Component: 100 - total flux cleaned = -0.000423857 Jy ! Component: 150 - total flux cleaned = -0.000442744 Jy ! Component: 200 - total flux cleaned = -0.000454653 Jy ! Total flux subtracted in 200 components = -0.000454653 Jy ! Clean residual min=-0.001462 max=0.001595 Jy/beam ! Clean residual mean=-0.000003 rms=0.000416 Jy/beam ! Combined flux in latest and established models = 0.0883059 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 95 components and 0.0883059 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071598Jy sigma=0.000759 ! Fit after self-cal, rms=0.071599Jy sigma=0.000759 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.80833e-06 Jy ! Component: 100 - total flux cleaned = -6.60181e-06 Jy ! Component: 150 - total flux cleaned = -6.76697e-06 Jy ! Component: 200 - total flux cleaned = -6.7606e-06 Jy ! Total flux subtracted in 200 components = -6.7606e-06 Jy ! Clean residual min=-0.001462 max=0.001591 Jy/beam ! Clean residual mean=-0.000003 rms=0.000416 Jy/beam ! Combined flux in latest and established models = 0.0882992 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 99 components and 0.0882992 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071599Jy sigma=0.000759 ! Fit after self-cal, rms=0.071599Jy sigma=0.000759 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=5.101 mas, bmaj=9.767 mas, bpa=18.39 degrees ! Estimated noise=598.791 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.101 x 9.767 at 18.39 degrees (North through East) ! Clean map min=-0.0014761 max=0.086046 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.265 mas, bmaj=8.819 mas, bpa=20.28 degrees ! Estimated noise=792.785 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0670353 Jy ! Component: 100 - total flux cleaned = 0.0816928 Jy ! Component: 150 - total flux cleaned = 0.085387 Jy ! Component: 200 - total flux cleaned = 0.0871259 Jy ! Total flux subtracted in 200 components = 0.0871259 Jy ! Clean residual min=-0.002360 max=0.001975 Jy/beam ! Clean residual mean=-0.000006 rms=0.000553 Jy/beam ! Combined flux in latest and established models = 0.0871259 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.0871259 Jy ! Inverting map and beam ! Estimated beam: bmin=5.101 mas, bmaj=9.767 mas, bpa=18.39 degrees ! Estimated noise=598.791 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00105627 Jy ! Component: 100 - total flux cleaned = 0.00115941 Jy ! Component: 150 - total flux cleaned = 0.00126213 Jy ! Component: 200 - total flux cleaned = 0.00124588 Jy ! Total flux subtracted in 200 components = 0.00124588 Jy ! Clean residual min=-0.001542 max=0.001476 Jy/beam ! Clean residual mean=-0.000002 rms=0.000405 Jy/beam ! Combined flux in latest and established models = 0.0883718 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 27 components and 0.0883718 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.281 mas, bmaj=11.76 mas, bpa=4.099 degrees ! Estimated noise=654.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000116782 Jy ! Component: 100 - total flux cleaned = 8.47908e-05 Jy ! Component: 150 - total flux cleaned = 7.52593e-05 Jy ! Component: 200 - total flux cleaned = 6.71903e-05 Jy ! Total flux subtracted in 200 components = 6.71903e-05 Jy ! Clean residual min=-0.001497 max=0.001547 Jy/beam ! Clean residual mean=-0.000002 rms=0.000419 Jy/beam ! Combined flux in latest and established models = 0.088439 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.14692e-05 Jy ! Component: 100 - total flux cleaned = -3.48282e-05 Jy ! Component: 150 - total flux cleaned = -4.73215e-05 Jy ! Component: 200 - total flux cleaned = -5.35044e-05 Jy ! Total flux subtracted in 200 components = -5.35044e-05 Jy ! Clean residual min=-0.001477 max=0.001552 Jy/beam ! Clean residual mean=-0.000003 rms=0.000418 Jy/beam ! Combined flux in latest and established models = 0.0883855 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 52 components and 0.0883855 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=5.101 mas, bmaj=9.767 mas, bpa=18.39 degrees ! Estimated noise=598.791 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.65719e-05 Jy ! Component: 100 - total flux cleaned = 4.04884e-05 Jy ! Component: 150 - total flux cleaned = 5.35408e-05 Jy ! Component: 200 - total flux cleaned = 4.1371e-05 Jy ! Total flux subtracted in 200 components = 4.1371e-05 Jy ! Clean residual min=-0.001533 max=0.001437 Jy/beam ! Clean residual mean=-0.000002 rms=0.000400 Jy/beam ! Combined flux in latest and established models = 0.0884268 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 58 components and 0.0884268 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071605Jy sigma=0.000759 ! Fit after self-cal, rms=0.071604Jy sigma=0.000759 wmodel J2329+0834_S_2014_08_05_pus_map.mod ! Writing 58 model components to file: J2329+0834_S_2014_08_05_pus_map.mod wobs J2329+0834_S_2014_08_05_pus_uvs.fits ! Writing UV FITS file: J2329+0834_S_2014_08_05_pus_uvs.fits wwins J2329+0834_S_2014_08_05_pus_map.win ! wwins: Wrote 1 windows to J2329+0834_S_2014_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000397268 Jy ! Component: 100 - total flux cleaned = -0.000528955 Jy ! Component: 150 - total flux cleaned = -0.000579687 Jy ! Component: 200 - total flux cleaned = -0.000603401 Jy ! Component: 250 - total flux cleaned = -0.000580419 Jy ! Component: 300 - total flux cleaned = -0.000669301 Jy ! Component: 350 - total flux cleaned = -0.000754932 Jy ! Component: 400 - total flux cleaned = -0.000775528 Jy ! Component: 450 - total flux cleaned = -0.000815897 Jy ! Component: 500 - total flux cleaned = -0.000775988 Jy ! Component: 550 - total flux cleaned = -0.000795114 Jy ! Component: 600 - total flux cleaned = -0.000813582 Jy ! Component: 650 - total flux cleaned = -0.00073972 Jy ! Component: 700 - total flux cleaned = -0.000704064 Jy ! Component: 750 - total flux cleaned = -0.000704063 Jy ! Component: 800 - total flux cleaned = -0.000669039 Jy ! Component: 850 - total flux cleaned = -0.00065165 Jy ! Component: 900 - total flux cleaned = -0.00061822 Jy ! Component: 950 - total flux cleaned = -0.000634719 Jy ! Component: 1000 - total flux cleaned = -0.000667113 Jy ! Component: 1050 - total flux cleaned = -0.0006829 Jy ! Component: 1100 - total flux cleaned = -0.000682921 Jy ! Component: 1150 - total flux cleaned = -0.000683131 Jy ! Component: 1200 - total flux cleaned = -0.000727983 Jy ! Component: 1250 - total flux cleaned = -0.000757579 Jy ! Component: 1300 - total flux cleaned = -0.000801167 Jy ! Component: 1350 - total flux cleaned = -0.000858318 Jy ! Component: 1400 - total flux cleaned = -0.000900559 Jy ! Component: 1450 - total flux cleaned = -0.000914395 Jy ! Component: 1500 - total flux cleaned = -0.000928038 Jy ! Component: 1550 - total flux cleaned = -0.000901053 Jy ! Component: 1600 - total flux cleaned = -0.000941191 Jy ! Component: 1650 - total flux cleaned = -0.0009544 Jy ! Component: 1700 - total flux cleaned = -0.000967417 Jy ! Component: 1750 - total flux cleaned = -0.00100612 Jy ! Component: 1800 - total flux cleaned = -0.00100615 Jy ! Component: 1850 - total flux cleaned = -0.000993674 Jy ! Component: 1900 - total flux cleaned = -0.000993756 Jy ! Component: 1950 - total flux cleaned = -0.00100623 Jy ! Component: 2000 - total flux cleaned = -0.00105506 Jy ! Component: 2050 - total flux cleaned = -0.00106694 Jy ! Component: 2100 - total flux cleaned = -0.00110234 Jy ! Component: 2150 - total flux cleaned = -0.00111389 Jy ! Component: 2200 - total flux cleaned = -0.00112552 Jy ! Component: 2250 - total flux cleaned = -0.00110268 Jy ! Component: 2300 - total flux cleaned = -0.00111414 Jy ! Component: 2350 - total flux cleaned = -0.00112533 Jy ! Component: 2400 - total flux cleaned = -0.0011365 Jy ! Component: 2450 - total flux cleaned = -0.0011475 Jy ! Component: 2500 - total flux cleaned = -0.00112559 Jy ! Component: 2550 - total flux cleaned = -0.00114737 Jy ! Component: 2600 - total flux cleaned = -0.00115836 Jy ! Component: 2650 - total flux cleaned = -0.00117964 Jy ! Component: 2700 - total flux cleaned = -0.00115866 Jy ! Component: 2750 - total flux cleaned = -0.00119018 Jy ! Component: 2800 - total flux cleaned = -0.00119033 Jy ! Component: 2850 - total flux cleaned = -0.00121084 Jy ! Component: 2900 - total flux cleaned = -0.00126167 Jy ! Component: 2950 - total flux cleaned = -0.00128175 Jy ! Component: 3000 - total flux cleaned = -0.0012918 Jy ! Component: 3050 - total flux cleaned = -0.00131152 Jy ! Component: 3100 - total flux cleaned = -0.00132135 Jy ! Component: 3150 - total flux cleaned = -0.00131175 Jy ! Component: 3200 - total flux cleaned = -0.0013503 Jy ! Component: 3250 - total flux cleaned = -0.00135993 Jy ! Component: 3300 - total flux cleaned = -0.00136946 Jy ! Component: 3350 - total flux cleaned = -0.00138827 Jy ! Component: 3400 - total flux cleaned = -0.00139759 Jy ! Component: 3450 - total flux cleaned = -0.00143463 Jy ! Component: 3500 - total flux cleaned = -0.00141627 Jy ! Component: 3550 - total flux cleaned = -0.00147099 Jy ! Component: 3600 - total flux cleaned = -0.0015072 Jy ! Component: 3650 - total flux cleaned = -0.00154319 Jy ! Component: 3700 - total flux cleaned = -0.00156111 Jy ! Component: 3750 - total flux cleaned = -0.00159662 Jy ! Component: 3800 - total flux cleaned = -0.00163189 Jy ! Component: 3850 - total flux cleaned = -0.001693 Jy ! Component: 3900 - total flux cleaned = -0.00171039 Jy ! Component: 3950 - total flux cleaned = -0.00176208 Jy ! Component: 4000 - total flux cleaned = -0.0017877 Jy ! Component: 4050 - total flux cleaned = -0.00180461 Jy ! Total flux subtracted in 4096 components = -0.00186369 Jy ! Clean residual min=-0.000498 max=0.000561 Jy/beam ! Clean residual mean=-0.000003 rms=0.000159 Jy/beam ! Combined flux in latest and established models = 0.0865631 Jy keep ! Adding 271 model components to the UV plane model. ! The established model now contains 329 components and 0.0865631 Jy ![Exited script file: muppet] wmap "J2329+0834_S_2014_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.101 x 9.767 at 18.39 degrees (North through East) ! Clean map min=-0.0012961 max=0.086118 Jy/beam ! Writing clean map to FITS file: J2329+0834_S_2014_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0861178 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000156955 device "J2329+0834_S_2014_08_05_pus\_map.eps/VPS" ! Attempting to open device: 'J2329+0834_S_2014_08_05_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.546767 0.546767 1.09353 2.18707 4.37414 8.74827 17.4965 34.9931 69.9862 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.086 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.101 x 9.767 at 18.39 degrees (North through East) ! Clean map min=-0.0012961 max=0.086118 Jy/beam quit ! Quitting program ! Log file J2329+0834_S_2014_08_05_pus_uvs.log closed on Sun Nov 13 17:41:58 2016