! Started logfile: J2327+8012_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:37:56 2017 obs J2327+8012_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J2327+8012_S_2014_01_04_pus_uva.fits ! AN table 1: 76 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.680556 visibilities/baseline/integration-bin. ! Found source: J2327+8012 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 7448 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2327+8012_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 114 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 114 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 114 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 114 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.906937Jy sigma=0.011994 ! Fit after self-cal, rms=0.898174Jy sigma=0.011874 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.447 mas, bmaj=10.23 mas, bpa=-24.35 degrees ! Estimated noise=1391.2 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0791932 Jy ! Component: 100 - total flux cleaned = 0.0973599 Jy ! Total flux subtracted in 100 components = 0.0973599 Jy ! Clean residual min=-0.005731 max=0.006664 Jy/beam ! Clean residual mean=-0.000031 rms=0.001580 Jy/beam ! Combined flux in latest and established models = 0.0973599 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0973599 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083401Jy sigma=0.000924 ! Fit after self-cal, rms=0.083396Jy sigma=0.000924 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.089 mas, bmaj=11.12 mas, bpa=-24.61 degrees ! Estimated noise=664.347 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0104516 Jy ! Component: 100 - total flux cleaned = 0.0156801 Jy ! Component: 150 - total flux cleaned = 0.0190572 Jy ! Component: 200 - total flux cleaned = 0.0214104 Jy ! Total flux subtracted in 200 components = 0.0214104 Jy ! Clean residual min=-0.004193 max=0.003586 Jy/beam ! Clean residual mean=0.000008 rms=0.001007 Jy/beam ! Combined flux in latest and established models = 0.11877 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 40 components and 0.11877 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082018Jy sigma=0.000907 ! Fit after self-cal, rms=0.082019Jy sigma=0.000906 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.86 KP 1.00* LA 0.98 ! MK 0.99 NL 1.00 OV 0.95 PT 0.99 ! SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.07 KP 1.00* LA 0.96 ! MK 1.00 NL 1.04 OV 1.01 PT 0.98 ! SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.20 KP 1.00* LA 0.82 ! MK 1.08 NL 0.95 OV 0.92 PT 0.96 ! SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.03 KP 1.00* LA 0.90 ! MK 1.03 NL 1.05 OV 1.01 PT 0.98 ! SC 0.89 ! ! ! Fit before self-cal, rms=0.082019Jy sigma=0.000906 ! Fit after self-cal, rms=0.078390Jy sigma=0.000896 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.089 mas, bmaj=11.08 mas, bpa=-24.87 degrees ! Estimated noise=655.87 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000101696 Jy ! Component: 100 - total flux cleaned = -0.000403599 Jy ! Component: 150 - total flux cleaned = -0.000404692 Jy ! Component: 200 - total flux cleaned = -0.00045887 Jy ! Total flux subtracted in 200 components = -0.00045887 Jy ! Clean residual min=-0.002877 max=0.003195 Jy/beam ! Clean residual mean=0.000021 rms=0.000706 Jy/beam ! Combined flux in latest and established models = 0.118311 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 52 components and 0.118311 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078330Jy sigma=0.000896 ! Fit after self-cal, rms=0.078102Jy sigma=0.000895 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078102Jy sigma=0.000895 ! Fit after self-cal, rms=0.078185Jy sigma=0.000893 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.084 mas, bmaj=11.09 mas, bpa=-24.71 degrees ! Estimated noise=655.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.0613e-05 Jy ! Component: 100 - total flux cleaned = 7.62201e-05 Jy ! Component: 150 - total flux cleaned = 7.72362e-05 Jy ! Component: 200 - total flux cleaned = 9.90357e-05 Jy ! Total flux subtracted in 200 components = 9.90357e-05 Jy ! Clean residual min=-0.002606 max=0.002984 Jy/beam ! Clean residual mean=0.000012 rms=0.000618 Jy/beam ! Combined flux in latest and established models = 0.11841 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 62 components and 0.11841 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078159Jy sigma=0.000893 ! Fit after self-cal, rms=0.078145Jy sigma=0.000893 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (9.5, -1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00139 Jy ! Component: 100 - total flux cleaned = 0.00172879 Jy ! Component: 150 - total flux cleaned = 0.00211509 Jy ! Component: 200 - total flux cleaned = 0.00230861 Jy ! Total flux subtracted in 200 components = 0.00230861 Jy ! Clean residual min=-0.002572 max=0.001895 Jy/beam ! Clean residual mean=0.000015 rms=0.000537 Jy/beam ! Combined flux in latest and established models = 0.120719 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 85 components and 0.120719 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078047Jy sigma=0.000892 ! Fit after self-cal, rms=0.078034Jy sigma=0.000892 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078034Jy sigma=0.000892 ! Fit after self-cal, rms=0.077964Jy sigma=0.000892 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.082 mas, bmaj=11.08 mas, bpa=-24.71 degrees ! Estimated noise=655.384 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.13912e-06 Jy ! Component: 100 - total flux cleaned = 0.000212502 Jy ! Component: 150 - total flux cleaned = 0.000339676 Jy ! Component: 200 - total flux cleaned = 0.000386308 Jy ! Total flux subtracted in 200 components = 0.000386308 Jy ! Clean residual min=-0.002546 max=0.001916 Jy/beam ! Clean residual mean=0.000014 rms=0.000516 Jy/beam ! Combined flux in latest and established models = 0.121105 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 103 components and 0.121105 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077940Jy sigma=0.000891 ! Fit after self-cal, rms=0.077954Jy sigma=0.000891 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000125784 Jy ! Component: 100 - total flux cleaned = 0.000168637 Jy ! Component: 150 - total flux cleaned = 0.000188005 Jy ! Component: 200 - total flux cleaned = 0.00020726 Jy ! Total flux subtracted in 200 components = 0.00020726 Jy ! Clean residual min=-0.002508 max=0.001926 Jy/beam ! Clean residual mean=0.000015 rms=0.000508 Jy/beam ! Combined flux in latest and established models = 0.121313 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 111 components and 0.121313 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077941Jy sigma=0.000891 ! Fit after self-cal, rms=0.077943Jy sigma=0.000891 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077943Jy sigma=0.000891 ! Fit after self-cal, rms=0.077940Jy sigma=0.000891 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.135 mas, bmaj=13.68 mas, bpa=-19.58 degrees ! Estimated noise=769.247 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000426819 Jy ! Component: 100 - total flux cleaned = 0.000543452 Jy ! Component: 150 - total flux cleaned = 0.000609084 Jy ! Component: 200 - total flux cleaned = 0.000665908 Jy ! Total flux subtracted in 200 components = 0.000665908 Jy ! Clean residual min=-0.002414 max=0.002194 Jy/beam ! Clean residual mean=0.000027 rms=0.000627 Jy/beam ! Combined flux in latest and established models = 0.121979 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 139 components and 0.121979 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077939Jy sigma=0.000891 ! Fit after self-cal, rms=0.077935Jy sigma=0.000891 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000137853 Jy ! Component: 100 - total flux cleaned = 0.000189178 Jy ! Component: 150 - total flux cleaned = 0.000244746 Jy ! Component: 200 - total flux cleaned = 0.000264448 Jy ! Total flux subtracted in 200 components = 0.000264448 Jy ! Clean residual min=-0.002307 max=0.002129 Jy/beam ! Clean residual mean=0.000028 rms=0.000616 Jy/beam ! Combined flux in latest and established models = 0.122243 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 157 components and 0.122243 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077935Jy sigma=0.000891 ! Fit after self-cal, rms=0.077931Jy sigma=0.000891 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.082 mas, bmaj=11.08 mas, bpa=-24.72 degrees ! Estimated noise=655.061 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.082 x 11.08 at -24.72 degrees (North through East) ! Clean map min=-0.0027281 max=0.10278 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.433 mas, bmaj=10.18 mas, bpa=-24.46 degrees ! Estimated noise=1378.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0784433 Jy ! Component: 100 - total flux cleaned = 0.0966899 Jy ! Component: 150 - total flux cleaned = 0.103679 Jy ! Component: 200 - total flux cleaned = 0.10646 Jy ! Total flux subtracted in 200 components = 0.10646 Jy ! Clean residual min=-0.004216 max=0.004057 Jy/beam ! Clean residual mean=-0.000012 rms=0.001118 Jy/beam ! Combined flux in latest and established models = 0.10646 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.10646 Jy ! Inverting map and beam ! Estimated beam: bmin=3.082 mas, bmaj=11.08 mas, bpa=-24.72 degrees ! Estimated noise=655.061 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00514245 Jy ! Component: 100 - total flux cleaned = 0.00825073 Jy ! Component: 150 - total flux cleaned = 0.0100994 Jy ! Component: 200 - total flux cleaned = 0.0111591 Jy ! Total flux subtracted in 200 components = 0.0111591 Jy ! Clean residual min=-0.002941 max=0.001935 Jy/beam ! Clean residual mean=0.000006 rms=0.000590 Jy/beam ! Combined flux in latest and established models = 0.117619 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 46 components and 0.117619 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.135 mas, bmaj=13.68 mas, bpa=-19.58 degrees ! Estimated noise=769.247 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00182128 Jy ! Component: 100 - total flux cleaned = 0.00266438 Jy ! Component: 150 - total flux cleaned = 0.00326235 Jy ! Component: 200 - total flux cleaned = 0.00362682 Jy ! Total flux subtracted in 200 components = 0.00362682 Jy ! Clean residual min=-0.002481 max=0.002385 Jy/beam ! Clean residual mean=0.000025 rms=0.000658 Jy/beam ! Combined flux in latest and established models = 0.121246 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000217514 Jy ! Component: 100 - total flux cleaned = 0.000355703 Jy ! Component: 150 - total flux cleaned = 0.00047597 Jy ! Component: 200 - total flux cleaned = 0.000546515 Jy ! Total flux subtracted in 200 components = 0.000546515 Jy ! Clean residual min=-0.002355 max=0.002233 Jy/beam ! Clean residual mean=0.000027 rms=0.000632 Jy/beam ! Combined flux in latest and established models = 0.121793 Jy ! Adding 74 model components to the UV plane model. ! The established model now contains 116 components and 0.121793 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.082 mas, bmaj=11.08 mas, bpa=-24.72 degrees ! Estimated noise=655.061 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000396772 Jy ! Component: 100 - total flux cleaned = -0.000495802 Jy ! Component: 150 - total flux cleaned = -0.000609776 Jy ! Component: 200 - total flux cleaned = -0.000661455 Jy ! Total flux subtracted in 200 components = -0.000661455 Jy ! Clean residual min=-0.002604 max=0.002110 Jy/beam ! Clean residual mean=0.000012 rms=0.000510 Jy/beam ! Combined flux in latest and established models = 0.121131 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 135 components and 0.121131 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077961Jy sigma=0.000891 ! Fit after self-cal, rms=0.077954Jy sigma=0.000891 wmodel J2327+8012_S_2014_01_04_pus_map.mod ! Writing 135 model components to file: J2327+8012_S_2014_01_04_pus_map.mod wobs J2327+8012_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J2327+8012_S_2014_01_04_pus_uvs.fits wwins J2327+8012_S_2014_01_04_pus_map.win ! wwins: Wrote 2 windows to J2327+8012_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000845225 Jy ! Component: 100 - total flux cleaned = -0.00136933 Jy ! Component: 150 - total flux cleaned = -0.00159545 Jy ! Component: 200 - total flux cleaned = -0.00168526 Jy ! Component: 250 - total flux cleaned = -0.00185533 Jy ! Component: 300 - total flux cleaned = -0.00193729 Jy ! Component: 350 - total flux cleaned = -0.00193763 Jy ! Component: 400 - total flux cleaned = -0.00196337 Jy ! Component: 450 - total flux cleaned = -0.00201303 Jy ! Component: 500 - total flux cleaned = -0.00203689 Jy ! Component: 550 - total flux cleaned = -0.00203727 Jy ! Component: 600 - total flux cleaned = -0.00203713 Jy ! Component: 650 - total flux cleaned = -0.00190424 Jy ! Component: 700 - total flux cleaned = -0.00179702 Jy ! Component: 750 - total flux cleaned = -0.00173409 Jy ! Component: 800 - total flux cleaned = -0.00163169 Jy ! Component: 850 - total flux cleaned = -0.0015516 Jy ! Component: 900 - total flux cleaned = -0.00155141 Jy ! Component: 950 - total flux cleaned = -0.00149349 Jy ! Component: 1000 - total flux cleaned = -0.00143634 Jy ! Component: 1050 - total flux cleaned = -0.00139901 Jy ! Component: 1100 - total flux cleaned = -0.00134366 Jy ! Component: 1150 - total flux cleaned = -0.00136155 Jy ! Component: 1200 - total flux cleaned = -0.00132566 Jy ! Component: 1250 - total flux cleaned = -0.00130788 Jy ! Component: 1300 - total flux cleaned = -0.00125563 Jy ! Component: 1350 - total flux cleaned = -0.00130729 Jy ! Component: 1400 - total flux cleaned = -0.00130704 Jy ! Component: 1450 - total flux cleaned = -0.00132428 Jy ! Component: 1500 - total flux cleaned = -0.00137402 Jy ! Component: 1550 - total flux cleaned = -0.00140696 Jy ! Component: 1600 - total flux cleaned = -0.00147161 Jy ! Component: 1650 - total flux cleaned = -0.00150373 Jy ! Component: 1700 - total flux cleaned = -0.00153525 Jy ! Component: 1750 - total flux cleaned = -0.00153514 Jy ! Component: 1800 - total flux cleaned = -0.00159711 Jy ! Component: 1850 - total flux cleaned = -0.00168882 Jy ! Component: 1900 - total flux cleaned = -0.00171901 Jy ! Component: 1950 - total flux cleaned = -0.00177869 Jy ! Component: 2000 - total flux cleaned = -0.00186734 Jy ! Component: 2050 - total flux cleaned = -0.00186734 Jy ! Component: 2100 - total flux cleaned = -0.00191071 Jy ! Component: 2150 - total flux cleaned = -0.00193943 Jy ! Component: 2200 - total flux cleaned = -0.00192537 Jy ! Component: 2250 - total flux cleaned = -0.00200961 Jy ! Component: 2300 - total flux cleaned = -0.00199562 Jy ! Component: 2350 - total flux cleaned = -0.00202313 Jy ! Component: 2400 - total flux cleaned = -0.00200956 Jy ! Component: 2450 - total flux cleaned = -0.00209064 Jy ! Component: 2500 - total flux cleaned = -0.00205037 Jy ! Component: 2550 - total flux cleaned = -0.00207708 Jy ! Component: 2600 - total flux cleaned = -0.00207704 Jy ! Component: 2650 - total flux cleaned = -0.00206384 Jy ! Component: 2700 - total flux cleaned = -0.00211552 Jy ! Component: 2750 - total flux cleaned = -0.00208987 Jy ! Component: 2800 - total flux cleaned = -0.00211517 Jy ! Component: 2850 - total flux cleaned = -0.00212792 Jy ! Component: 2900 - total flux cleaned = -0.0021902 Jy ! Component: 2950 - total flux cleaned = -0.00212848 Jy ! Component: 3000 - total flux cleaned = -0.00217757 Jy ! Component: 3050 - total flux cleaned = -0.00218968 Jy ! Component: 3100 - total flux cleaned = -0.00222579 Jy ! Component: 3150 - total flux cleaned = -0.00222581 Jy ! Component: 3200 - total flux cleaned = -0.00223781 Jy ! Component: 3250 - total flux cleaned = -0.00224964 Jy ! Component: 3300 - total flux cleaned = -0.00223808 Jy ! Component: 3350 - total flux cleaned = -0.00226133 Jy ! Component: 3400 - total flux cleaned = -0.00224983 Jy ! Component: 3450 - total flux cleaned = -0.00228411 Jy ! Component: 3500 - total flux cleaned = -0.00230678 Jy ! Component: 3550 - total flux cleaned = -0.0022955 Jy ! Component: 3600 - total flux cleaned = -0.0023291 Jy ! Component: 3650 - total flux cleaned = -0.00231804 Jy ! Component: 3700 - total flux cleaned = -0.00236224 Jy ! Component: 3750 - total flux cleaned = -0.00237322 Jy ! Component: 3800 - total flux cleaned = -0.0023732 Jy ! Component: 3850 - total flux cleaned = -0.00240565 Jy ! Component: 3900 - total flux cleaned = -0.00241636 Jy ! Component: 3950 - total flux cleaned = -0.00244845 Jy ! Component: 4000 - total flux cleaned = -0.0024696 Jy ! Component: 4050 - total flux cleaned = -0.00248015 Jy ! Total flux subtracted in 4096 components = -0.00251166 Jy ! Clean residual min=-0.000605 max=0.000567 Jy/beam ! Clean residual mean=0.000001 rms=0.000186 Jy/beam ! Combined flux in latest and established models = 0.11862 Jy keep ! Adding 249 model components to the UV plane model. ! The established model now contains 384 components and 0.11862 Jy ![Exited script file: muppet] wmap "J2327+8012_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.082 x 11.08 at -24.72 degrees (North through East) ! Clean map min=-0.0026357 max=0.10284 Jy/beam ! Writing clean map to FITS file: J2327+8012_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.102837 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000184038 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.536882 0.536882 1.07376 2.14753 4.29506 8.59012 17.1802 34.3605 68.7209 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.102 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.082 x 11.08 at -24.72 degrees (North through East) ! Clean map min=-0.0026357 max=0.10284 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2327+8012_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:38:01 2017