! Started logfile: J2326-0202_S_2014_08_05_pus_uvs.log on Sun Nov 13 17:41:34 2016
obs J2326-0202_S_2014_08_05_pus_uva.fits
! Reading UV FITS file: J2326-0202_S_2014_08_05_pus_uva.fits
! AN table 1: 124 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.768996 visibilities/baseline/integration-bin.
! Found source: J2326-0202
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23588e+09      3.2e+07          1      3.2e+07
!  02        2  2.26788e+09      3.2e+07          1      3.2e+07
!  03        3  2.29988e+09      3.2e+07          1      3.2e+07
!  04        4  2.36388e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 360 lines of history.
! 
! Reading 17164 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@muppet J2326-0202_S_2014_08_05_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 156 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 156 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 156 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 156 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.895995Jy  sigma=0.009273
! Fit after  self-cal, rms=0.881432Jy  sigma=0.009129
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.628 mas, bmaj=9.815 mas, bpa=19.16 degrees
! Estimated noise=871.137 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0935339 Jy
! Component: 100  -  total flux cleaned = 0.114236 Jy
! Total flux subtracted in 100 components = 0.114236 Jy
! Clean residual min=-0.004410 max=0.006919 Jy/beam
! Clean residual mean=-0.000002 rms=0.001315 Jy/beam
! Combined flux in latest and established models = 0.114236 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.114236 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084059Jy  sigma=0.000791
! Fit after  self-cal, rms=0.084044Jy  sigma=0.000791
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.317 mas, bmaj=10.63 mas, bpa=18.09 degrees
! Estimated noise=532.727 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00844482 Jy
! Component: 100  -  total flux cleaned = 0.0121206 Jy
! Component: 150  -  total flux cleaned = 0.0141165 Jy
! Component: 200  -  total flux cleaned = 0.0152976 Jy
! Total flux subtracted in 200 components = 0.0152976 Jy
! Clean residual min=-0.002401 max=0.003066 Jy/beam
! Clean residual mean=-0.000007 rms=0.000660 Jy/beam
! Combined flux in latest and established models = 0.129534 Jy
! Performing phase self-cal
! Adding 45 model components to the UV plane model.
! The established model now contains 55 components and 0.129534 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083182Jy  sigma=0.000784
! Fit after  self-cal, rms=0.083182Jy  sigma=0.000783
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.87     HN        1.01     KP        1.10     
!   LA        1.11     MK        1.00*    NL        0.94     OV        0.99     
!   PT        1.04     SC        0.97     
! 
! 
! Correcting IF 2.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.03     HN        1.07     KP        1.03     
!   LA        1.03     MK        1.00*    NL        0.99     OV        1.00     
!   PT        1.03     SC        1.05     
! 
! 
! Correcting IF 3.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        1.13     HN        1.05     KP        0.91     
!   LA        0.83     MK        1.00*    NL        0.99     OV        0.95     
!   PT        1.01     SC        1.03     
! 
! 
! Correcting IF 4.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        0.99     HN        1.03     KP        0.91     
!   LA        0.81     MK        1.00*    NL        1.06     OV        0.98     
!   PT        1.04     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.083182Jy  sigma=0.000783
! Fit after  self-cal, rms=0.080704Jy  sigma=0.000774
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.332 mas, bmaj=10.7 mas, bpa=18.2 degrees
! Estimated noise=531.661 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (25.5, 14).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00250956 Jy
! Component: 100  -  total flux cleaned = 0.00349496 Jy
! Component: 150  -  total flux cleaned = 0.00387928 Jy
! Component: 200  -  total flux cleaned = 0.00410024 Jy
! Total flux subtracted in 200 components = 0.00410024 Jy
! Clean residual min=-0.001816 max=0.001779 Jy/beam
! Clean residual mean=-0.000005 rms=0.000447 Jy/beam
! Combined flux in latest and established models = 0.133634 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 87 components and 0.133634 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.080617Jy  sigma=0.000773
! Fit after  self-cal, rms=0.080596Jy  sigma=0.000773
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.080596Jy  sigma=0.000773
! Fit after  self-cal, rms=0.080943Jy  sigma=0.000772
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.332 mas, bmaj=10.69 mas, bpa=18.09 degrees
! Estimated noise=530.782 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000559618 Jy
! Component: 100  -  total flux cleaned = 0.000917545 Jy
! Component: 150  -  total flux cleaned = 0.00122836 Jy
! Component: 200  -  total flux cleaned = 0.00143577 Jy
! Total flux subtracted in 200 components = 0.00143577 Jy
! Clean residual min=-0.001503 max=0.001502 Jy/beam
! Clean residual mean=-0.000005 rms=0.000376 Jy/beam
! Combined flux in latest and established models = 0.13507 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 106 components and 0.13507 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.080923Jy  sigma=0.000771
! Fit after  self-cal, rms=0.080942Jy  sigma=0.000771
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000176013 Jy
! Component: 100  -  total flux cleaned = 0.000295762 Jy
! Component: 150  -  total flux cleaned = 0.000295704 Jy
! Component: 200  -  total flux cleaned = 0.000330446 Jy
! Total flux subtracted in 200 components = 0.000330446 Jy
! Clean residual min=-0.001541 max=0.001464 Jy/beam
! Clean residual mean=-0.000005 rms=0.000369 Jy/beam
! Combined flux in latest and established models = 0.1354 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 125 components and 0.1354 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.080933Jy  sigma=0.000771
! Fit after  self-cal, rms=0.080931Jy  sigma=0.000771
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.080931Jy  sigma=0.000771
! Fit after  self-cal, rms=0.081081Jy  sigma=0.000771
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.338 mas, bmaj=10.7 mas, bpa=18.06 degrees
! Estimated noise=530.885 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.69079e-05 Jy
! Component: 100  -  total flux cleaned = 0.000155264 Jy
! Component: 150  -  total flux cleaned = 0.000170737 Jy
! Component: 200  -  total flux cleaned = 0.000154966 Jy
! Total flux subtracted in 200 components = 0.000154966 Jy
! Clean residual min=-0.001575 max=0.001378 Jy/beam
! Clean residual mean=-0.000005 rms=0.000362 Jy/beam
! Combined flux in latest and established models = 0.135555 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 135 components and 0.135555 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081074Jy  sigma=0.000771
! Fit after  self-cal, rms=0.081077Jy  sigma=0.000771
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.30481e-05 Jy
! Component: 100  -  total flux cleaned = 2.74473e-05 Jy
! Component: 150  -  total flux cleaned = 5.39161e-05 Jy
! Component: 200  -  total flux cleaned = 4.09162e-05 Jy
! Total flux subtracted in 200 components = 4.09162e-05 Jy
! Clean residual min=-0.001580 max=0.001351 Jy/beam
! Clean residual mean=-0.000005 rms=0.000359 Jy/beam
! Combined flux in latest and established models = 0.135596 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 143 components and 0.135596 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081073Jy  sigma=0.000771
! Fit after  self-cal, rms=0.081071Jy  sigma=0.000771
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081071Jy  sigma=0.000771
! Fit after  self-cal, rms=0.081176Jy  sigma=0.000771
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.183 mas, bmaj=13.25 mas, bpa=10.27 degrees
! Estimated noise=594.844 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.42014e-05 Jy
! Component: 100  -  total flux cleaned = 3.61819e-06 Jy
! Component: 150  -  total flux cleaned = 2.8145e-05 Jy
! Component: 200  -  total flux cleaned = 3.88674e-05 Jy
! Total flux subtracted in 200 components = 3.88674e-05 Jy
! Clean residual min=-0.001789 max=0.001814 Jy/beam
! Clean residual mean=-0.000008 rms=0.000433 Jy/beam
! Combined flux in latest and established models = 0.135635 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 157 components and 0.135635 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081173Jy  sigma=0.000771
! Fit after  self-cal, rms=0.081175Jy  sigma=0.000771
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.88854e-05 Jy
! Component: 100  -  total flux cleaned = 6.91653e-05 Jy
! Component: 150  -  total flux cleaned = 8.64641e-05 Jy
! Component: 200  -  total flux cleaned = 8.62695e-05 Jy
! Total flux subtracted in 200 components = 8.62695e-05 Jy
! Clean residual min=-0.001800 max=0.001799 Jy/beam
! Clean residual mean=-0.000008 rms=0.000431 Jy/beam
! Combined flux in latest and established models = 0.135721 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 162 components and 0.135721 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081174Jy  sigma=0.000771
! Fit after  self-cal, rms=0.081173Jy  sigma=0.000771
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.341 mas, bmaj=10.71 mas, bpa=18.05 degrees
! Estimated noise=530.931 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.341 x 10.71 at 18.05 degrees (North through East)
! Clean map  min=-0.0016049  max=0.12016 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.644 mas, bmaj=9.889 mas, bpa=19.11 degrees
! Estimated noise=869.214 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0932324 Jy
! Component: 100  -  total flux cleaned = 0.113801 Jy
! Component: 150  -  total flux cleaned = 0.120763 Jy
! Component: 200  -  total flux cleaned = 0.124142 Jy
! Total flux subtracted in 200 components = 0.124142 Jy
! Clean residual min=-0.002797 max=0.003080 Jy/beam
! Clean residual mean=-0.000005 rms=0.000805 Jy/beam
! Combined flux in latest and established models = 0.124142 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 24 model components to the UV plane model.
! The established model now contains 24 components and 0.124142 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.341 mas, bmaj=10.71 mas, bpa=18.05 degrees
! Estimated noise=530.931 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00328838 Jy
! Component: 100  -  total flux cleaned = 0.00520148 Jy
! Component: 150  -  total flux cleaned = 0.0065411 Jy
! Component: 200  -  total flux cleaned = 0.00711882 Jy
! Total flux subtracted in 200 components = 0.00711882 Jy
! Clean residual min=-0.001526 max=0.001551 Jy/beam
! Clean residual mean=-0.000006 rms=0.000404 Jy/beam
! Combined flux in latest and established models = 0.13126 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 64 components and 0.13126 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.183 mas, bmaj=13.25 mas, bpa=10.27 degrees
! Estimated noise=594.844 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00140197 Jy
! Component: 100  -  total flux cleaned = 0.00231233 Jy
! Component: 150  -  total flux cleaned = 0.00274788 Jy
! Component: 200  -  total flux cleaned = 0.00300669 Jy
! Total flux subtracted in 200 components = 0.00300669 Jy
! Clean residual min=-0.001714 max=0.001817 Jy/beam
! Clean residual mean=-0.000008 rms=0.000448 Jy/beam
! Combined flux in latest and established models = 0.134267 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000156842 Jy
! Component: 100  -  total flux cleaned = 0.000257066 Jy
! Component: 150  -  total flux cleaned = 0.000366231 Jy
! Component: 200  -  total flux cleaned = 0.000448702 Jy
! Total flux subtracted in 200 components = 0.000448702 Jy
! Clean residual min=-0.001760 max=0.001796 Jy/beam
! Clean residual mean=-0.000008 rms=0.000438 Jy/beam
! Combined flux in latest and established models = 0.134716 Jy
! Adding 50 model components to the UV plane model.
! The established model now contains 105 components and 0.134716 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.341 mas, bmaj=10.71 mas, bpa=18.05 degrees
! Estimated noise=530.931 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.80961e-05 Jy
! Component: 100  -  total flux cleaned = -5.94255e-07 Jy
! Component: 150  -  total flux cleaned = 2.1314e-05 Jy
! Component: 200  -  total flux cleaned = 6.17127e-05 Jy
! Total flux subtracted in 200 components = 6.17127e-05 Jy
! Clean residual min=-0.001589 max=0.001318 Jy/beam
! Clean residual mean=-0.000005 rms=0.000362 Jy/beam
! Combined flux in latest and established models = 0.134778 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 127 components and 0.134778 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081185Jy  sigma=0.000771
! Fit after  self-cal, rms=0.081183Jy  sigma=0.000771
wmodel J2326-0202_S_2014_08_05_pus_map.mod
! Writing 127 model components to file: J2326-0202_S_2014_08_05_pus_map.mod
wobs J2326-0202_S_2014_08_05_pus_uvs.fits
! Writing UV FITS file: J2326-0202_S_2014_08_05_pus_uvs.fits
wwins J2326-0202_S_2014_08_05_pus_map.win
! wwins: Wrote 2 windows to J2326-0202_S_2014_08_05_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000362147 Jy
! Component: 100  -  total flux cleaned = -0.000339125 Jy
! Component: 150  -  total flux cleaned = -0.000338952 Jy
! Component: 200  -  total flux cleaned = -0.000380736 Jy
! Component: 250  -  total flux cleaned = -0.000400881 Jy
! Component: 300  -  total flux cleaned = -0.000478494 Jy
! Component: 350  -  total flux cleaned = -0.000610058 Jy
! Component: 400  -  total flux cleaned = -0.000702026 Jy
! Component: 450  -  total flux cleaned = -0.000773744 Jy
! Component: 500  -  total flux cleaned = -0.000826103 Jy
! Component: 550  -  total flux cleaned = -0.000825913 Jy
! Component: 600  -  total flux cleaned = -0.000908978 Jy
! Component: 650  -  total flux cleaned = -0.000859419 Jy
! Component: 700  -  total flux cleaned = -0.000859523 Jy
! Component: 750  -  total flux cleaned = -0.000875759 Jy
! Component: 800  -  total flux cleaned = -0.000968798 Jy
! Component: 850  -  total flux cleaned = -0.000984066 Jy
! Component: 900  -  total flux cleaned = -0.000999278 Jy
! Component: 950  -  total flux cleaned = -0.00107354 Jy
! Component: 1000  -  total flux cleaned = -0.00110288 Jy
! Component: 1050  -  total flux cleaned = -0.00116013 Jy
! Component: 1100  -  total flux cleaned = -0.00117404 Jy
! Component: 1150  -  total flux cleaned = -0.00121568 Jy
! Component: 1200  -  total flux cleaned = -0.0013254 Jy
! Component: 1250  -  total flux cleaned = -0.00133872 Jy
! Component: 1300  -  total flux cleaned = -0.00141916 Jy
! Component: 1350  -  total flux cleaned = -0.00145897 Jy
! Component: 1400  -  total flux cleaned = -0.0015503 Jy
! Component: 1450  -  total flux cleaned = -0.00156298 Jy
! Component: 1500  -  total flux cleaned = -0.00156303 Jy
! Component: 1550  -  total flux cleaned = -0.00163858 Jy
! Component: 1600  -  total flux cleaned = -0.00161367 Jy
! Component: 1650  -  total flux cleaned = -0.00167493 Jy
! Component: 1700  -  total flux cleaned = -0.00168703 Jy
! Component: 1750  -  total flux cleaned = -0.00172327 Jy
! Component: 1800  -  total flux cleaned = -0.00177085 Jy
! Component: 1850  -  total flux cleaned = -0.0018295 Jy
! Component: 1900  -  total flux cleaned = -0.0018759 Jy
! Component: 1950  -  total flux cleaned = -0.00191031 Jy
! Component: 2000  -  total flux cleaned = -0.00196694 Jy
! Component: 2050  -  total flux cleaned = -0.0019443 Jy
! Component: 2100  -  total flux cleaned = -0.00201123 Jy
! Component: 2150  -  total flux cleaned = -0.00206652 Jy
! Component: 2200  -  total flux cleaned = -0.00208835 Jy
! Component: 2250  -  total flux cleaned = -0.00218563 Jy
! Component: 2300  -  total flux cleaned = -0.00221772 Jy
! Component: 2350  -  total flux cleaned = -0.00223903 Jy
! Component: 2400  -  total flux cleaned = -0.00229159 Jy
! Component: 2450  -  total flux cleaned = -0.00233328 Jy
! Component: 2500  -  total flux cleaned = -0.00237447 Jy
! Component: 2550  -  total flux cleaned = -0.00241534 Jy
! Component: 2600  -  total flux cleaned = -0.00244571 Jy
! Component: 2650  -  total flux cleaned = -0.00251594 Jy
! Component: 2700  -  total flux cleaned = -0.00252591 Jy
! Component: 2750  -  total flux cleaned = -0.00259504 Jy
! Component: 2800  -  total flux cleaned = -0.00260497 Jy
! Component: 2850  -  total flux cleaned = -0.00262441 Jy
! Component: 2900  -  total flux cleaned = -0.00269183 Jy
! Component: 2950  -  total flux cleaned = -0.00268231 Jy
! Component: 3000  -  total flux cleaned = -0.00271077 Jy
! Component: 3050  -  total flux cleaned = -0.00275772 Jy
! Component: 3100  -  total flux cleaned = -0.00275778 Jy
! Component: 3150  -  total flux cleaned = -0.0028226 Jy
! Component: 3200  -  total flux cleaned = -0.00283171 Jy
! Component: 3250  -  total flux cleaned = -0.00284987 Jy
! Component: 3300  -  total flux cleaned = -0.00286794 Jy
! Component: 3350  -  total flux cleaned = -0.00292175 Jy
! Component: 3400  -  total flux cleaned = -0.00293063 Jy
! Component: 3450  -  total flux cleaned = -0.00294835 Jy
! Component: 3500  -  total flux cleaned = -0.00299223 Jy
! Component: 3550  -  total flux cleaned = -0.00300968 Jy
! Component: 3600  -  total flux cleaned = -0.00299238 Jy
! Component: 3650  -  total flux cleaned = -0.00306119 Jy
! Component: 3700  -  total flux cleaned = -0.00311243 Jy
! Component: 3750  -  total flux cleaned = -0.00311253 Jy
! Component: 3800  -  total flux cleaned = -0.0031799 Jy
! Component: 3850  -  total flux cleaned = -0.00317989 Jy
! Component: 3900  -  total flux cleaned = -0.00320482 Jy
! Component: 3950  -  total flux cleaned = -0.00325433 Jy
! Component: 4000  -  total flux cleaned = -0.00326251 Jy
! Component: 4050  -  total flux cleaned = -0.00329508 Jy
! Total flux subtracted in 4096 components = -0.00329511 Jy
! Clean residual min=-0.000457 max=0.000567 Jy/beam
! Clean residual mean=-0.000003 rms=0.000158 Jy/beam
! Combined flux in latest and established models = 0.131482 Jy
keep
! Adding 296 model components to the UV plane model.
! The established model now contains 423 components and 0.131482 Jy
![Exited script file: muppet]
wmap "J2326-0202_S_2014_08_05_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.341 x 10.71 at 18.05 degrees (North through East)
! Clean map  min=-0.0012191  max=0.12023 Jy/beam
! Writing clean map to FITS file: J2326-0202_S_2014_08_05_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.12023 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00015583 
device "J2326-0202_S_2014_08_05_pus\_map.eps/VPS"
! Attempting to open device: 'J2326-0202_S_2014_08_05_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.388829 0.388829 0.777658 1.55532 3.11063 6.22126 12.4425 24.8851 49.7701 99.5402
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0004 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.12 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.341 x 10.71 at 18.05 degrees (North through East)
! Clean map  min=-0.0012191  max=0.12023 Jy/beam
quit
! Quitting program
! Log file J2326-0202_S_2014_08_05_pus_uvs.log closed on Sun Nov 13 17:41:40 2016