! Started logfile: J2325+4806_S_2015_01_23_pus_uvs.log on Mon Jan 2 19:38:37 2017 obs J2325+4806_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J2325+4806_S_2015_01_23_pus_uva.fits ! AN table 1: 122 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.887432 visibilities/baseline/integration-bin. ! Found source: J2325+4806 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 19488 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2325+4806_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 70 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 70 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 70 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 70 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.003687Jy sigma=0.011286 ! Fit after self-cal, rms=0.953981Jy sigma=0.011018 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.813 mas, bmaj=4.59 mas, bpa=-11.42 degrees ! Estimated noise=733.491 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0415705 Jy ! Component: 100 - total flux cleaned = 0.0523891 Jy ! Total flux subtracted in 100 components = 0.0523891 Jy ! Clean residual min=-0.003929 max=0.005953 Jy/beam ! Clean residual mean=-0.000009 rms=0.001061 Jy/beam ! Combined flux in latest and established models = 0.0523891 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0523891 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.211054Jy sigma=0.000797 ! Fit after self-cal, rms=0.210975Jy sigma=0.000796 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.482 mas, bmaj=5.399 mas, bpa=-9.671 degrees ! Estimated noise=477.963 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5.5, -1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0091339 Jy ! Component: 100 - total flux cleaned = 0.0148935 Jy ! Component: 150 - total flux cleaned = 0.0189929 Jy ! Component: 200 - total flux cleaned = 0.0220865 Jy ! Total flux subtracted in 200 components = 0.0220865 Jy ! Clean residual min=-0.003326 max=0.004570 Jy/beam ! Clean residual mean=-0.000018 rms=0.000956 Jy/beam ! Combined flux in latest and established models = 0.0744756 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 50 components and 0.0744756 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.209952Jy sigma=0.000783 ! Fit after self-cal, rms=0.209753Jy sigma=0.000782 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.61 HN 0.99 KP 1.03 ! LA 0.92 MK 1.01 NL 1.09 OV 1.04 ! PT 0.99 SC 1.08 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.80 HN 0.99 KP 0.97 ! LA 0.92 MK 1.10 NL 1.26 OV 1.07 ! PT 0.96 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.87 HN 1.03 KP 0.85 ! LA 0.73 MK 1.08 NL 1.54 OV 1.02 ! PT 0.97 SC 1.09 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.58 HN 0.87 KP 0.80 ! LA 0.83 MK 1.00 NL 0.94 OV 1.03 ! PT 1.02 SC 1.04 ! ! ! Fit before self-cal, rms=0.209753Jy sigma=0.000782 ! Fit after self-cal, rms=0.150838Jy sigma=0.000773 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.57 mas, bmaj=5.49 mas, bpa=-10.21 degrees ! Estimated noise=476.39 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (27, -5.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00383292 Jy ! Component: 100 - total flux cleaned = 0.00627866 Jy ! Component: 150 - total flux cleaned = 0.00783552 Jy ! Component: 200 - total flux cleaned = 0.00837955 Jy ! Total flux subtracted in 200 components = 0.00837955 Jy ! Clean residual min=-0.002372 max=0.002755 Jy/beam ! Clean residual mean=-0.000012 rms=0.000607 Jy/beam ! Combined flux in latest and established models = 0.0828551 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 74 components and 0.0828551 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150657Jy sigma=0.000770 ! Fit after self-cal, rms=0.150431Jy sigma=0.000769 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150431Jy sigma=0.000769 ! Fit after self-cal, rms=0.102959Jy sigma=0.000766 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.594 mas, bmaj=5.461 mas, bpa=-9.744 degrees ! Estimated noise=472.793 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00146761 Jy ! Component: 100 - total flux cleaned = 0.00216849 Jy ! Component: 150 - total flux cleaned = 0.00266886 Jy ! Component: 200 - total flux cleaned = 0.00291072 Jy ! Total flux subtracted in 200 components = 0.00291072 Jy ! Clean residual min=-0.001463 max=0.001767 Jy/beam ! Clean residual mean=-0.000007 rms=0.000416 Jy/beam ! Combined flux in latest and established models = 0.0857658 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 96 components and 0.0857658 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102935Jy sigma=0.000765 ! Fit after self-cal, rms=0.102818Jy sigma=0.000765 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (125.5, 90.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0017187 Jy ! Component: 100 - total flux cleaned = 0.00217791 Jy ! Component: 150 - total flux cleaned = 0.00234775 Jy ! Component: 200 - total flux cleaned = 0.00242523 Jy ! Total flux subtracted in 200 components = 0.00242523 Jy ! Clean residual min=-0.001453 max=0.001638 Jy/beam ! Clean residual mean=-0.000007 rms=0.000386 Jy/beam ! Combined flux in latest and established models = 0.0881911 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 120 components and 0.0881911 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102783Jy sigma=0.000764 ! Fit after self-cal, rms=0.102759Jy sigma=0.000764 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102759Jy sigma=0.000764 ! Fit after self-cal, rms=0.101048Jy sigma=0.000764 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.597 mas, bmaj=5.466 mas, bpa=-9.851 degrees ! Estimated noise=470.493 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000909586 Jy ! Component: 100 - total flux cleaned = 0.00123974 Jy ! Component: 150 - total flux cleaned = 0.00145347 Jy ! Component: 200 - total flux cleaned = 0.00158211 Jy ! Total flux subtracted in 200 components = 0.00158211 Jy ! Clean residual min=-0.001343 max=0.001614 Jy/beam ! Clean residual mean=-0.000006 rms=0.000365 Jy/beam ! Combined flux in latest and established models = 0.0897732 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 130 components and 0.0897732 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101031Jy sigma=0.000764 ! Fit after self-cal, rms=0.101007Jy sigma=0.000764 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (94.5, 96.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00142608 Jy ! Component: 100 - total flux cleaned = 0.00189203 Jy ! Component: 150 - total flux cleaned = 0.00222167 Jy ! Component: 200 - total flux cleaned = 0.002433 Jy ! Total flux subtracted in 200 components = 0.002433 Jy ! Clean residual min=-0.001354 max=0.001430 Jy/beam ! Clean residual mean=-0.000005 rms=0.000339 Jy/beam ! Combined flux in latest and established models = 0.0922062 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 148 components and 0.0922062 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100966Jy sigma=0.000763 ! Fit after self-cal, rms=0.100942Jy sigma=0.000763 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100942Jy sigma=0.000763 ! Fit after self-cal, rms=0.100435Jy sigma=0.000763 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.905 mas, bmaj=9.052 mas, bpa=-11.17 degrees ! Estimated noise=584.804 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00125715 Jy ! Component: 100 - total flux cleaned = 0.00185169 Jy ! Component: 150 - total flux cleaned = 0.00195915 Jy ! Component: 200 - total flux cleaned = 0.00209929 Jy ! Total flux subtracted in 200 components = 0.00209929 Jy ! Clean residual min=-0.001358 max=0.001546 Jy/beam ! Clean residual mean=-0.000009 rms=0.000414 Jy/beam ! Combined flux in latest and established models = 0.0943055 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 172 components and 0.0943055 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100416Jy sigma=0.000763 ! Fit after self-cal, rms=0.100404Jy sigma=0.000763 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000381157 Jy ! Component: 100 - total flux cleaned = 0.000493865 Jy ! Component: 150 - total flux cleaned = 0.000572261 Jy ! Component: 200 - total flux cleaned = 0.000625583 Jy ! Total flux subtracted in 200 components = 0.000625583 Jy ! Clean residual min=-0.001401 max=0.001478 Jy/beam ! Clean residual mean=-0.000009 rms=0.000407 Jy/beam ! Combined flux in latest and established models = 0.0949311 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 188 components and 0.0949311 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100394Jy sigma=0.000763 ! Fit after self-cal, rms=0.100383Jy sigma=0.000763 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.604 mas, bmaj=5.48 mas, bpa=-9.819 degrees ! Estimated noise=468.171 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.604 x 5.48 at -9.819 degrees (North through East) ! Clean map min=-0.0013138 max=0.05251 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.888 mas, bmaj=4.666 mas, bpa=-12.04 degrees ! Estimated noise=726.367 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0406797 Jy ! Component: 100 - total flux cleaned = 0.0515533 Jy ! Component: 150 - total flux cleaned = 0.0580472 Jy ! Component: 200 - total flux cleaned = 0.0627509 Jy ! Total flux subtracted in 200 components = 0.0627509 Jy ! Clean residual min=-0.003315 max=0.003153 Jy/beam ! Clean residual mean=-0.000005 rms=0.000781 Jy/beam ! Combined flux in latest and established models = 0.062751 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.062751 Jy ! Inverting map and beam ! Estimated beam: bmin=3.604 mas, bmaj=5.48 mas, bpa=-9.819 degrees ! Estimated noise=468.171 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00596722 Jy ! Component: 100 - total flux cleaned = 0.0102569 Jy ! Component: 150 - total flux cleaned = 0.013698 Jy ! Component: 200 - total flux cleaned = 0.016552 Jy ! Total flux subtracted in 200 components = 0.016552 Jy ! Clean residual min=-0.001929 max=0.002503 Jy/beam ! Clean residual mean=-0.000009 rms=0.000519 Jy/beam ! Combined flux in latest and established models = 0.0793029 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 63 components and 0.0793029 Jy ! Inverting map ! Added new window around map position (14.5, -1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00261255 Jy ! Component: 100 - total flux cleaned = 0.004676 Jy ! Component: 150 - total flux cleaned = 0.00644706 Jy ! Component: 200 - total flux cleaned = 0.00797577 Jy ! Total flux subtracted in 200 components = 0.00797577 Jy ! Clean residual min=-0.001586 max=0.001349 Jy/beam ! Clean residual mean=-0.000007 rms=0.000386 Jy/beam ! Combined flux in latest and established models = 0.0872787 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 94 components and 0.0872787 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.905 mas, bmaj=9.052 mas, bpa=-11.17 degrees ! Estimated noise=584.804 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00202087 Jy ! Component: 100 - total flux cleaned = 0.00351791 Jy ! Component: 150 - total flux cleaned = 0.0046664 Jy ! Component: 200 - total flux cleaned = 0.00530289 Jy ! Total flux subtracted in 200 components = 0.00530289 Jy ! Clean residual min=-0.001474 max=0.001562 Jy/beam ! Clean residual mean=-0.000011 rms=0.000444 Jy/beam ! Combined flux in latest and established models = 0.0925816 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000516217 Jy ! Component: 100 - total flux cleaned = 0.000849779 Jy ! Component: 150 - total flux cleaned = 0.00117541 Jy ! Component: 200 - total flux cleaned = 0.00146543 Jy ! Total flux subtracted in 200 components = 0.00146543 Jy ! Clean residual min=-0.001304 max=0.001520 Jy/beam ! Clean residual mean=-0.000010 rms=0.000416 Jy/beam ! Combined flux in latest and established models = 0.094047 Jy ! Adding 99 model components to the UV plane model. ! The established model now contains 178 components and 0.094047 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.604 mas, bmaj=5.48 mas, bpa=-9.819 degrees ! Estimated noise=468.171 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.66268e-06 Jy ! Component: 100 - total flux cleaned = 0.000162032 Jy ! Component: 150 - total flux cleaned = 0.000315173 Jy ! Component: 200 - total flux cleaned = 0.000411335 Jy ! Total flux subtracted in 200 components = 0.000411335 Jy ! Clean residual min=-0.001340 max=0.001254 Jy/beam ! Clean residual mean=-0.000005 rms=0.000313 Jy/beam ! Combined flux in latest and established models = 0.0944583 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 206 components and 0.0944584 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100389Jy sigma=0.000763 ! Fit after self-cal, rms=0.100369Jy sigma=0.000763 wmodel J2325+4806_S_2015_01_23_pus_map.mod ! Writing 206 model components to file: J2325+4806_S_2015_01_23_pus_map.mod wobs J2325+4806_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J2325+4806_S_2015_01_23_pus_uvs.fits wwins J2325+4806_S_2015_01_23_pus_map.win ! wwins: Wrote 6 windows to J2325+4806_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00044207 Jy ! Component: 100 - total flux cleaned = -0.000707846 Jy ! Component: 150 - total flux cleaned = -0.000960322 Jy ! Component: 200 - total flux cleaned = -0.00118312 Jy ! Component: 250 - total flux cleaned = -0.0013595 Jy ! Component: 300 - total flux cleaned = -0.0015306 Jy ! Component: 350 - total flux cleaned = -0.00169722 Jy ! Component: 400 - total flux cleaned = -0.00175152 Jy ! Component: 450 - total flux cleaned = -0.00182248 Jy ! Component: 500 - total flux cleaned = -0.00187428 Jy ! Component: 550 - total flux cleaned = -0.00192512 Jy ! Component: 600 - total flux cleaned = -0.00195845 Jy ! Component: 650 - total flux cleaned = -0.0019749 Jy ! Component: 700 - total flux cleaned = -0.00200735 Jy ! Component: 750 - total flux cleaned = -0.00202315 Jy ! Component: 800 - total flux cleaned = -0.00202331 Jy ! Component: 850 - total flux cleaned = -0.0020847 Jy ! Component: 900 - total flux cleaned = -0.00209978 Jy ! Component: 950 - total flux cleaned = -0.00220374 Jy ! Component: 1000 - total flux cleaned = -0.00221832 Jy ! Component: 1050 - total flux cleaned = -0.00227596 Jy ! Component: 1100 - total flux cleaned = -0.0023471 Jy ! Component: 1150 - total flux cleaned = -0.00236105 Jy ! Component: 1200 - total flux cleaned = -0.0024302 Jy ! Component: 1250 - total flux cleaned = -0.00245768 Jy ! Component: 1300 - total flux cleaned = -0.00255209 Jy ! Component: 1350 - total flux cleaned = -0.00259237 Jy ! Component: 1400 - total flux cleaned = -0.00265836 Jy ! Component: 1450 - total flux cleaned = -0.00274962 Jy ! Component: 1500 - total flux cleaned = -0.00278804 Jy ! Component: 1550 - total flux cleaned = -0.0028898 Jy ! Component: 1600 - total flux cleaned = -0.00292752 Jy ! Component: 1650 - total flux cleaned = -0.00297739 Jy ! Component: 1700 - total flux cleaned = -0.00302684 Jy ! Component: 1750 - total flux cleaned = -0.00311244 Jy ! Component: 1800 - total flux cleaned = -0.00312452 Jy ! Component: 1850 - total flux cleaned = -0.00320812 Jy ! Component: 1900 - total flux cleaned = -0.00323201 Jy ! Component: 1950 - total flux cleaned = -0.00327907 Jy ! Component: 2000 - total flux cleaned = -0.00333725 Jy ! Component: 2050 - total flux cleaned = -0.00342938 Jy ! Component: 2100 - total flux cleaned = -0.00346334 Jy ! Component: 2150 - total flux cleaned = -0.00347459 Jy ! Component: 2200 - total flux cleaned = -0.00350824 Jy ! Component: 2250 - total flux cleaned = -0.00354161 Jy ! Component: 2300 - total flux cleaned = -0.00354163 Jy ! Component: 2350 - total flux cleaned = -0.00359591 Jy ! Component: 2400 - total flux cleaned = -0.00362823 Jy ! Component: 2450 - total flux cleaned = -0.0036283 Jy ! Component: 2500 - total flux cleaned = -0.00362841 Jy ! Component: 2550 - total flux cleaned = -0.00374398 Jy ! Component: 2600 - total flux cleaned = -0.00376485 Jy ! Component: 2650 - total flux cleaned = -0.00380602 Jy ! Component: 2700 - total flux cleaned = -0.0038163 Jy ! Component: 2750 - total flux cleaned = -0.00386712 Jy ! Component: 2800 - total flux cleaned = -0.00388733 Jy ! Component: 2850 - total flux cleaned = -0.00395753 Jy ! Component: 2900 - total flux cleaned = -0.00398751 Jy ! Component: 2950 - total flux cleaned = -0.00405648 Jy ! Component: 3000 - total flux cleaned = -0.00408587 Jy ! Component: 3050 - total flux cleaned = -0.00410532 Jy ! Component: 3100 - total flux cleaned = -0.00414415 Jy ! Component: 3150 - total flux cleaned = -0.00418255 Jy ! Component: 3200 - total flux cleaned = -0.00421112 Jy ! Component: 3250 - total flux cleaned = -0.00423949 Jy ! Component: 3300 - total flux cleaned = -0.00425836 Jy ! Component: 3350 - total flux cleaned = -0.00428652 Jy ! Component: 3400 - total flux cleaned = -0.00431443 Jy ! Component: 3450 - total flux cleaned = -0.0043329 Jy ! Component: 3500 - total flux cleaned = -0.00433298 Jy ! Component: 3550 - total flux cleaned = -0.00436962 Jy ! Component: 3600 - total flux cleaned = -0.00436955 Jy ! Component: 3650 - total flux cleaned = -0.00438762 Jy ! Component: 3700 - total flux cleaned = -0.00438759 Jy ! Component: 3750 - total flux cleaned = -0.00439655 Jy ! Component: 3800 - total flux cleaned = -0.00440548 Jy ! Component: 3850 - total flux cleaned = -0.00444094 Jy ! Component: 3900 - total flux cleaned = -0.00442332 Jy ! Component: 3950 - total flux cleaned = -0.00444964 Jy ! Component: 4000 - total flux cleaned = -0.00443226 Jy ! Component: 4050 - total flux cleaned = -0.00448428 Jy ! Total flux subtracted in 4096 components = -0.00451016 Jy ! Clean residual min=-0.000482 max=0.000530 Jy/beam ! Clean residual mean=-0.000002 rms=0.000156 Jy/beam ! Combined flux in latest and established models = 0.0899482 Jy keep ! Adding 260 model components to the UV plane model. ! The established model now contains 466 components and 0.0899481 Jy ![Exited script file: muppet] wmap "J2325+4806_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.604 x 5.48 at -9.819 degrees (North through East) ! Clean map min=-0.0010899 max=0.05262 Jy/beam ! Writing clean map to FITS file: J2325+4806_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0526204 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000155306 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.885431 0.885431 1.77086 3.54172 7.08345 14.1669 28.3338 56.6676 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.052 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.604 x 5.48 at -9.819 degrees (North through East) ! Clean map min=-0.0010899 max=0.05262 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2325+4806_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 19:38:43 2017