! Started logfile: J2318-4010_X_2015_01_23_pus_uvs.log on Sun Jan  1 22:23:46 2017
obs J2318-4010_X_2015_01_23_pus_uva.fits
! Reading UV FITS file: J2318-4010_X_2015_01_23_pus_uva.fits
! AN table 1: 123 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.692683 visibilities/baseline/integration-bin.
! Found source: J2318-4010
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.44388e+09      3.2e+07          1      3.2e+07
!  02        2  8.47588e+09      3.2e+07          1      3.2e+07
!  03        3  8.50788e+09      3.2e+07          1      3.2e+07
!  04        4  8.53988e+09      3.2e+07          1      3.2e+07
!  05        5  8.60388e+09      3.2e+07          1      3.2e+07
!  06        6  8.63588e+09      3.2e+07          1      3.2e+07
!  07        7  8.69988e+09      3.2e+07          1      3.2e+07
!  08        8  8.73188e+09      3.2e+07          1      3.2e+07
!  09        9  8.79588e+09      3.2e+07          1      3.2e+07
!  10       10  8.82788e+09      3.2e+07          1      3.2e+07
!  11       11  8.85988e+09      3.2e+07          1      3.2e+07
!  12       12  8.89188e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 350 lines of history.
! 
! Reading 46008 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@muppet J2318-4010_X_2015_01_23_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 199 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 261 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 260 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 261 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 261 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 261 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 322 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 322 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 199 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 383 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 383 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 322 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.952431Jy  sigma=0.008499
! Fit after  self-cal, rms=0.917034Jy  sigma=0.008213
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.5684 mas, bmaj=1.751 mas, bpa=-5.048 degrees
! Estimated noise=1106.84 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0543672 Jy
! Component: 100  -  total flux cleaned = 0.0715189 Jy
! Total flux subtracted in 100 components = 0.0715189 Jy
! Clean residual min=-0.005472 max=0.011190 Jy/beam
! Clean residual mean=-0.000031 rms=0.001911 Jy/beam
! Combined flux in latest and established models = 0.0715189 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.0715189 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.104890Jy  sigma=0.000836
! Fit after  self-cal, rms=0.104780Jy  sigma=0.000835
! Inverting map 
! Added new window around map position (-0.6, -0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.012603 Jy
! Component: 100  -  total flux cleaned = 0.0210292 Jy
! Total flux subtracted in 100 components = 0.0210292 Jy
! Clean residual min=-0.005439 max=0.006151 Jy/beam
! Clean residual mean=-0.000025 rms=0.001452 Jy/beam
! Combined flux in latest and established models = 0.0925481 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 27 components and 0.0925481 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.101313Jy  sigma=0.000795
! Fit after  self-cal, rms=0.101224Jy  sigma=0.000795
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8734 mas, bmaj=2.52 mas, bpa=-0.3469 degrees
! Estimated noise=412.543 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0143841 Jy
! Component: 100  -  total flux cleaned = 0.0215276 Jy
! Component: 150  -  total flux cleaned = 0.0251888 Jy
! Component: 200  -  total flux cleaned = 0.0270655 Jy
! Total flux subtracted in 200 components = 0.0270655 Jy
! Clean residual min=-0.007996 max=0.005838 Jy/beam
! Clean residual mean=-0.000030 rms=0.001826 Jy/beam
! Combined flux in latest and established models = 0.119614 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 42 components and 0.119614 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.099446Jy  sigma=0.000775
! Fit after  self-cal, rms=0.099314Jy  sigma=0.000774
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.10     HN        1.10     KP        0.89     
!   LA        1.03     MK        0.94     NL        1.14     OV        1.02     
!   PT        0.97     SC        0.98     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.06     HN        1.23     KP        0.83     
!   LA        1.01     MK        0.99     NL        1.07     OV        1.02     
!   PT        0.97     SC        0.98     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.08     HN        1.13     KP        0.78     
!   LA        1.03     MK        1.03     NL        1.22     OV        1.04     
!   PT        0.91     SC        1.07     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.04     HN        1.20     KP        0.76     
!   LA        1.04     MK        1.00     NL        1.12     OV        1.00     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.03     HN        1.02     KP        0.73     
!   LA        1.05     MK        1.02     NL        1.23     OV        0.96     
!   PT        0.96     SC        1.07     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.07     HN        1.21     KP        0.73     
!   LA        1.10     MK        0.96     NL        1.12     OV        0.99     
!   PT        0.93     SC        1.01     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.19     HN        0.98     KP        0.72     
!   LA        1.06     MK        1.01     NL        1.30     OV        1.01     
!   PT        1.05     SC        1.03     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.10     HN        1.01     KP        0.73     
!   LA        1.03     MK        1.03     NL        1.23     OV        1.04     
!   PT        0.99     SC        0.90     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.09     HN        1.05     KP        0.76     
!   LA        1.07     MK        0.96     NL        1.19     OV        1.05     
!   PT        0.94     SC        1.02     
! 
! 
! Correcting IF 10.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.10     HN        0.97     KP        0.75     
!   LA        1.08     MK        1.00*    NL        1.25     OV        1.05     
!   PT        0.96     SC        0.93     
! 
! 
! Correcting IF 11.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.08     HN        0.93     KP        0.81     
!   LA        1.11     MK        0.93     NL        1.16     OV        1.01     
!   PT        0.94     SC        1.00*    
! 
! 
! Correcting IF 12.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.12     HN        0.93     KP        0.82     
!   LA        1.06     MK        1.00*    NL        1.10     OV        1.05     
!   PT        0.95     SC        0.93     
! 
! 
! Fit before self-cal, rms=0.099314Jy  sigma=0.000774
! Fit after  self-cal, rms=0.101705Jy  sigma=0.000761
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8723 mas, bmaj=2.513 mas, bpa=-0.2071 degrees
! Estimated noise=411.701 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000608206 Jy
! Component: 100  -  total flux cleaned = 0.000568999 Jy
! Component: 150  -  total flux cleaned = 0.000510581 Jy
! Component: 200  -  total flux cleaned = 0.000462461 Jy
! Total flux subtracted in 200 components = 0.000462461 Jy
! Clean residual min=-0.001510 max=0.001434 Jy/beam
! Clean residual mean=0.000004 rms=0.000418 Jy/beam
! Combined flux in latest and established models = 0.120076 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 44 components and 0.120076 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.101677Jy  sigma=0.000761
! Fit after  self-cal, rms=0.101882Jy  sigma=0.000760
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.101882Jy  sigma=0.000760
! Fit after  self-cal, rms=0.101115Jy  sigma=0.000760
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8679 mas, bmaj=2.501 mas, bpa=-0.1891 degrees
! Estimated noise=409.956 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000414089 Jy
! Component: 100  -  total flux cleaned = 0.000390026 Jy
! Component: 150  -  total flux cleaned = 0.000352474 Jy
! Component: 200  -  total flux cleaned = 0.000319394 Jy
! Total flux subtracted in 200 components = 0.000319394 Jy
! Clean residual min=-0.001502 max=0.001318 Jy/beam
! Clean residual mean=0.000002 rms=0.000366 Jy/beam
! Combined flux in latest and established models = 0.120395 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 47 components and 0.120395 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.101102Jy  sigma=0.000760
! Fit after  self-cal, rms=0.101092Jy  sigma=0.000760
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000131614 Jy
! Component: 100  -  total flux cleaned = 0.000114082 Jy
! Component: 150  -  total flux cleaned = 0.000127528 Jy
! Component: 200  -  total flux cleaned = 0.000127135 Jy
! Total flux subtracted in 200 components = 0.000127135 Jy
! Clean residual min=-0.001478 max=0.001309 Jy/beam
! Clean residual mean=0.000003 rms=0.000362 Jy/beam
! Combined flux in latest and established models = 0.120523 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 49 components and 0.120523 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.101084Jy  sigma=0.000759
! Fit after  self-cal, rms=0.101074Jy  sigma=0.000759
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.101074Jy  sigma=0.000759
! Fit after  self-cal, rms=0.100057Jy  sigma=0.000759
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8645 mas, bmaj=2.488 mas, bpa=-0.0804 degrees
! Estimated noise=407.681 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000218354 Jy
! Component: 100  -  total flux cleaned = 0.000167186 Jy
! Component: 150  -  total flux cleaned = 0.000123535 Jy
! Component: 200  -  total flux cleaned = 8.66763e-05 Jy
! Total flux subtracted in 200 components = 8.66763e-05 Jy
! Clean residual min=-0.001243 max=0.001183 Jy/beam
! Clean residual mean=0.000001 rms=0.000329 Jy/beam
! Combined flux in latest and established models = 0.120609 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 50 components and 0.120609 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.100050Jy  sigma=0.000759
! Fit after  self-cal, rms=0.100026Jy  sigma=0.000759
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.28359e-05 Jy
! Component: 100  -  total flux cleaned = 4.99933e-05 Jy
! Component: 150  -  total flux cleaned = 4.99368e-05 Jy
! Component: 200  -  total flux cleaned = 6.12484e-05 Jy
! Total flux subtracted in 200 components = 6.12484e-05 Jy
! Clean residual min=-0.001236 max=0.001173 Jy/beam
! Clean residual mean=0.000002 rms=0.000330 Jy/beam
! Combined flux in latest and established models = 0.12067 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 50 components and 0.12067 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.100022Jy  sigma=0.000759
! Fit after  self-cal, rms=0.100015Jy  sigma=0.000759
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.100015Jy  sigma=0.000759
! Fit after  self-cal, rms=0.099392Jy  sigma=0.000759
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.44 mas, bmaj=9.752 mas, bpa=-0.9236 degrees
! Estimated noise=493.651 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000232142 Jy
! Component: 100  -  total flux cleaned = 0.000232619 Jy
! Component: 150  -  total flux cleaned = 0.000232957 Jy
! Component: 200  -  total flux cleaned = 0.00023325 Jy
! Total flux subtracted in 200 components = 0.00023325 Jy
! Clean residual min=-0.001099 max=0.001057 Jy/beam
! Clean residual mean=0.000004 rms=0.000346 Jy/beam
! Combined flux in latest and established models = 0.120904 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 57 components and 0.120904 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.099391Jy  sigma=0.000759
! Fit after  self-cal, rms=0.099376Jy  sigma=0.000759
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000103676 Jy
! Component: 100  -  total flux cleaned = 0.000102898 Jy
! Component: 150  -  total flux cleaned = 0.000102717 Jy
! Component: 200  -  total flux cleaned = 0.000103098 Jy
! Total flux subtracted in 200 components = 0.000103098 Jy
! Clean residual min=-0.001095 max=0.001061 Jy/beam
! Clean residual mean=0.000004 rms=0.000343 Jy/beam
! Combined flux in latest and established models = 0.121007 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 57 components and 0.121007 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.099375Jy  sigma=0.000759
! Fit after  self-cal, rms=0.099368Jy  sigma=0.000759
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8615 mas, bmaj=2.481 mas, bpa=-0.09322 degrees
! Estimated noise=405.843 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8615 x 2.481 at -0.09322 degrees (North through East)
! Clean map  min=-0.0010901  max=0.078279 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.5632 mas, bmaj=1.73 mas, bpa=-4.873 degrees
! Estimated noise=1064.36 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.051494 Jy
! Component: 100  -  total flux cleaned = 0.0714798 Jy
! Component: 150  -  total flux cleaned = 0.084588 Jy
! Component: 200  -  total flux cleaned = 0.0937938 Jy
! Total flux subtracted in 200 components = 0.0937938 Jy
! Clean residual min=-0.003908 max=0.006082 Jy/beam
! Clean residual mean=-0.000011 rms=0.001209 Jy/beam
! Combined flux in latest and established models = 0.0937938 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.0937938 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8615 mas, bmaj=2.481 mas, bpa=-0.09322 degrees
! Estimated noise=405.843 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0137449 Jy
! Component: 100  -  total flux cleaned = 0.0202853 Jy
! Component: 150  -  total flux cleaned = 0.023577 Jy
! Component: 200  -  total flux cleaned = 0.0252471 Jy
! Total flux subtracted in 200 components = 0.0252471 Jy
! Clean residual min=-0.001363 max=0.001712 Jy/beam
! Clean residual mean=-0.000005 rms=0.000368 Jy/beam
! Combined flux in latest and established models = 0.119041 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 41 components and 0.119041 Jy
! Inverting map 
! Added new window around map position (-1.4, -5.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00141163 Jy
! Component: 100  -  total flux cleaned = 0.00165069 Jy
! Component: 150  -  total flux cleaned = 0.00181857 Jy
! Component: 200  -  total flux cleaned = 0.00191192 Jy
! Total flux subtracted in 200 components = 0.00191192 Jy
! Clean residual min=-0.001131 max=0.001231 Jy/beam
! Clean residual mean=0.000002 rms=0.000311 Jy/beam
! Combined flux in latest and established models = 0.120953 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 61 components and 0.120953 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.44 mas, bmaj=9.752 mas, bpa=-0.9236 degrees
! Estimated noise=493.651 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00020887 Jy
! Component: 100  -  total flux cleaned = 0.000289207 Jy
! Component: 150  -  total flux cleaned = 0.000340864 Jy
! Component: 200  -  total flux cleaned = 0.000383495 Jy
! Total flux subtracted in 200 components = 0.000383495 Jy
! Clean residual min=-0.001058 max=0.001043 Jy/beam
! Clean residual mean=0.000006 rms=0.000315 Jy/beam
! Combined flux in latest and established models = 0.121336 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.65744e-05 Jy
! Component: 100  -  total flux cleaned = 4.19234e-05 Jy
! Component: 150  -  total flux cleaned = 4.16688e-05 Jy
! Component: 200  -  total flux cleaned = 4.18621e-05 Jy
! Total flux subtracted in 200 components = 4.18621e-05 Jy
! Clean residual min=-0.001055 max=0.001048 Jy/beam
! Clean residual mean=0.000006 rms=0.000312 Jy/beam
! Combined flux in latest and established models = 0.121378 Jy
! Adding 19 model components to the UV plane model.
! The established model now contains 75 components and 0.121378 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8615 mas, bmaj=2.481 mas, bpa=-0.09322 degrees
! Estimated noise=405.843 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.8524e-05 Jy
! Component: 100  -  total flux cleaned = -2.62445e-06 Jy
! Component: 150  -  total flux cleaned = -3.0059e-06 Jy
! Component: 200  -  total flux cleaned = -2.96252e-06 Jy
! Total flux subtracted in 200 components = -2.96252e-06 Jy
! Clean residual min=-0.001069 max=0.001264 Jy/beam
! Clean residual mean=0.000004 rms=0.000297 Jy/beam
! Combined flux in latest and established models = 0.121375 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 83 components and 0.121375 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.099349Jy  sigma=0.000759
! Fit after  self-cal, rms=0.099330Jy  sigma=0.000759
wmodel J2318-4010_X_2015_01_23_pus_map.mod
! Writing 83 model components to file: J2318-4010_X_2015_01_23_pus_map.mod
wobs J2318-4010_X_2015_01_23_pus_uvs.fits
! Writing UV FITS file: J2318-4010_X_2015_01_23_pus_uvs.fits
wwins J2318-4010_X_2015_01_23_pus_map.win
! wwins: Wrote 3 windows to J2318-4010_X_2015_01_23_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000222476 Jy
! Component: 100  -  total flux cleaned = 0.000131149 Jy
! Component: 150  -  total flux cleaned = 2.84688e-05 Jy
! Component: 200  -  total flux cleaned = -3.59427e-05 Jy
! Component: 250  -  total flux cleaned = -3.59647e-05 Jy
! Component: 300  -  total flux cleaned = -8.05108e-05 Jy
! Component: 350  -  total flux cleaned = -0.000166286 Jy
! Component: 400  -  total flux cleaned = -0.00019434 Jy
! Component: 450  -  total flux cleaned = -0.000275449 Jy
! Component: 500  -  total flux cleaned = -0.00031481 Jy
! Component: 550  -  total flux cleaned = -0.000327628 Jy
! Component: 600  -  total flux cleaned = -0.000340189 Jy
! Component: 650  -  total flux cleaned = -0.000365011 Jy
! Component: 700  -  total flux cleaned = -0.000401543 Jy
! Component: 750  -  total flux cleaned = -0.000449047 Jy
! Component: 800  -  total flux cleaned = -0.000495791 Jy
! Component: 850  -  total flux cleaned = -0.000530271 Jy
! Component: 900  -  total flux cleaned = -0.000586446 Jy
! Component: 950  -  total flux cleaned = -0.00060863 Jy
! Component: 1000  -  total flux cleaned = -0.000662943 Jy
! Component: 1050  -  total flux cleaned = -0.000695129 Jy
! Component: 1100  -  total flux cleaned = -0.000747769 Jy
! Component: 1150  -  total flux cleaned = -0.000789112 Jy
! Component: 1200  -  total flux cleaned = -0.00082989 Jy
! Component: 1250  -  total flux cleaned = -0.000890248 Jy
! Component: 1300  -  total flux cleaned = -0.000929806 Jy
! Component: 1350  -  total flux cleaned = -0.00098846 Jy
! Component: 1400  -  total flux cleaned = -0.00103654 Jy
! Component: 1450  -  total flux cleaned = -0.0011029 Jy
! Component: 1500  -  total flux cleaned = -0.00114965 Jy
! Component: 1550  -  total flux cleaned = -0.00118654 Jy
! Component: 1600  -  total flux cleaned = -0.00125015 Jy
! Component: 1650  -  total flux cleaned = -0.00125909 Jy
! Component: 1700  -  total flux cleaned = -0.0013211 Jy
! Component: 1750  -  total flux cleaned = -0.00131232 Jy
! Component: 1800  -  total flux cleaned = -0.00135571 Jy
! Component: 1850  -  total flux cleaned = -0.00141541 Jy
! Component: 1900  -  total flux cleaned = -0.0014491 Jy
! Component: 1950  -  total flux cleaned = -0.00148252 Jy
! Component: 2000  -  total flux cleaned = -0.00153194 Jy
! Total flux subtracted in 2048 components = -0.00158072 Jy
! Clean residual min=-0.000433 max=0.000442 Jy/beam
! Clean residual mean=-0.000000 rms=0.000154 Jy/beam
! Combined flux in latest and established models = 0.119795 Jy
keep
! Adding 117 model components to the UV plane model.
! The established model now contains 199 components and 0.119795 Jy
![Exited script file: muppet]
wmap "J2318-4010_X_2015_01_23_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8615 x 2.481 at -0.09322 degrees (North through East)
! Clean map  min=-0.0012902  max=0.078707 Jy/beam
! Writing clean map to FITS file: J2318-4010_X_2015_01_23_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0787073 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000153857 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.58644 0.58644 1.17288 2.34576 4.69152 9.38305 18.7661 37.5322 75.0644
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0004 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.078 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8615 x 2.481 at -0.09322 degrees (North through East)
! Clean map  min=-0.0012902  max=0.078707 Jy/beam
! Error occured in command: mapplot
! 
! <Aborted by EOF>
! <Aborted by EOF>
! <Aborted by EOF>
! <Aborted by EOF>
! 4 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 5 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 6 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 7 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 8 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 9 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 10 consecutive EOF's on stdin - 10 will exit program
! Log file J2318-4010_X_2015_01_23_pus_uvs.log closed on Sun Jan  1 22:23:49 2017