! Started logfile: J2317-1122_S_2014_08_05_pus_uvs.log on Sun Nov 13 17:40:47 2016 obs J2317-1122_S_2014_08_05_pus_uva.fits ! Reading UV FITS file: J2317-1122_S_2014_08_05_pus_uva.fits ! AN table 1: 123 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.765673 visibilities/baseline/integration-bin. ! Found source: J2317-1122 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 360 lines of history. ! ! Reading 16952 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2317-1122_S_2014_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 157 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 157 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 157 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 157 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.983703Jy sigma=0.010143 ! Fit after self-cal, rms=0.945356Jy sigma=0.009791 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.259 mas, bmaj=11.45 mas, bpa=20.79 degrees ! Estimated noise=753.857 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0437149 Jy ! Component: 100 - total flux cleaned = 0.0538317 Jy ! Total flux subtracted in 100 components = 0.0538317 Jy ! Clean residual min=-0.002937 max=0.003799 Jy/beam ! Clean residual mean=-0.000006 rms=0.000797 Jy/beam ! Combined flux in latest and established models = 0.0538317 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.0538317 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079429Jy sigma=0.000765 ! Fit after self-cal, rms=0.079129Jy sigma=0.000763 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.995 mas, bmaj=12.07 mas, bpa=18.58 degrees ! Estimated noise=533.072 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00534621 Jy ! Component: 100 - total flux cleaned = 0.00775912 Jy ! Component: 150 - total flux cleaned = 0.00915895 Jy ! Component: 200 - total flux cleaned = 0.0100364 Jy ! Total flux subtracted in 200 components = 0.0100364 Jy ! Clean residual min=-0.001922 max=0.001765 Jy/beam ! Clean residual mean=-0.000003 rms=0.000467 Jy/beam ! Combined flux in latest and established models = 0.0638681 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 39 components and 0.0638681 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078774Jy sigma=0.000759 ! Fit after self-cal, rms=0.078781Jy sigma=0.000759 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.93 HN 1.05 KP 1.05 ! LA 1.09 MK 1.00* NL 0.91 OV 0.95 ! PT 1.01 SC 1.08 ! ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.06 HN 1.00 KP 1.00 ! LA 1.03 MK 1.00* NL 0.91 OV 1.01 ! PT 1.07 SC 1.09 ! ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.08 HN 1.07 KP 0.94 ! LA 0.87 MK 1.00* NL 1.02 OV 0.96 ! PT 0.97 SC 0.97 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.09 HN 1.02 KP 0.87 ! LA 0.84 MK 1.00* NL 1.03 OV 0.96 ! PT 1.04 SC 0.94 ! ! ! Fit before self-cal, rms=0.078781Jy sigma=0.000759 ! Fit after self-cal, rms=0.077641Jy sigma=0.000757 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.01 mas, bmaj=12.12 mas, bpa=18.52 degrees ! Estimated noise=531.71 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00032797 Jy ! Component: 100 - total flux cleaned = 0.000308505 Jy ! Component: 150 - total flux cleaned = 0.000291521 Jy ! Component: 200 - total flux cleaned = 0.000290925 Jy ! Total flux subtracted in 200 components = 0.000290925 Jy ! Clean residual min=-0.001625 max=0.001517 Jy/beam ! Clean residual mean=-0.000002 rms=0.000419 Jy/beam ! Combined flux in latest and established models = 0.064159 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 52 components and 0.064159 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077629Jy sigma=0.000757 ! Fit after self-cal, rms=0.077625Jy sigma=0.000757 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077625Jy sigma=0.000757 ! Fit after self-cal, rms=0.077539Jy sigma=0.000756 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.008 mas, bmaj=12.11 mas, bpa=18.57 degrees ! Estimated noise=531.058 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.06498e-05 Jy ! Component: 100 - total flux cleaned = 5.48869e-05 Jy ! Component: 150 - total flux cleaned = 5.56618e-05 Jy ! Component: 200 - total flux cleaned = 5.50827e-05 Jy ! Total flux subtracted in 200 components = 5.50827e-05 Jy ! Clean residual min=-0.001553 max=0.001469 Jy/beam ! Clean residual mean=-0.000003 rms=0.000388 Jy/beam ! Combined flux in latest and established models = 0.0642141 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 56 components and 0.0642141 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077530Jy sigma=0.000756 ! Fit after self-cal, rms=0.077537Jy sigma=0.000756 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.32019e-05 Jy ! Component: 100 - total flux cleaned = 9.89678e-06 Jy ! Component: 150 - total flux cleaned = 1.00932e-05 Jy ! Component: 200 - total flux cleaned = 9.98532e-06 Jy ! Total flux subtracted in 200 components = 9.98532e-06 Jy ! Clean residual min=-0.001548 max=0.001480 Jy/beam ! Clean residual mean=-0.000003 rms=0.000386 Jy/beam ! Combined flux in latest and established models = 0.064224 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 58 components and 0.064224 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077532Jy sigma=0.000756 ! Fit after self-cal, rms=0.077530Jy sigma=0.000756 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077530Jy sigma=0.000756 ! Fit after self-cal, rms=0.077372Jy sigma=0.000756 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.004 mas, bmaj=12.1 mas, bpa=18.62 degrees ! Estimated noise=529.434 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00011458 Jy ! Component: 100 - total flux cleaned = -0.000114885 Jy ! Component: 150 - total flux cleaned = -0.000115623 Jy ! Component: 200 - total flux cleaned = -0.000105369 Jy ! Total flux subtracted in 200 components = -0.000105369 Jy ! Clean residual min=-0.001539 max=0.001461 Jy/beam ! Clean residual mean=-0.000003 rms=0.000379 Jy/beam ! Combined flux in latest and established models = 0.0641187 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 63 components and 0.0641187 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077368Jy sigma=0.000756 ! Fit after self-cal, rms=0.077371Jy sigma=0.000756 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.31629e-05 Jy ! Component: 100 - total flux cleaned = -2.46742e-06 Jy ! Component: 150 - total flux cleaned = 7.35459e-06 Jy ! Component: 200 - total flux cleaned = 1.63715e-05 Jy ! Total flux subtracted in 200 components = 1.63715e-05 Jy ! Clean residual min=-0.001538 max=0.001459 Jy/beam ! Clean residual mean=-0.000003 rms=0.000378 Jy/beam ! Combined flux in latest and established models = 0.064135 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 65 components and 0.064135 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077368Jy sigma=0.000756 ! Fit after self-cal, rms=0.077367Jy sigma=0.000756 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077367Jy sigma=0.000756 ! Fit after self-cal, rms=0.077207Jy sigma=0.000756 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.828 mas, bmaj=15.6 mas, bpa=8.839 degrees ! Estimated noise=597.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.57344e-05 Jy ! Component: 100 - total flux cleaned = 7.53272e-05 Jy ! Component: 150 - total flux cleaned = 8.85887e-05 Jy ! Component: 200 - total flux cleaned = 8.84926e-05 Jy ! Total flux subtracted in 200 components = 8.84926e-05 Jy ! Clean residual min=-0.001770 max=0.001373 Jy/beam ! Clean residual mean=-0.000005 rms=0.000428 Jy/beam ! Combined flux in latest and established models = 0.0642235 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 80 components and 0.0642235 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077207Jy sigma=0.000756 ! Fit after self-cal, rms=0.077208Jy sigma=0.000756 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.69761e-06 Jy ! Component: 100 - total flux cleaned = 8.55014e-06 Jy ! Component: 150 - total flux cleaned = 2.21561e-05 Jy ! Component: 200 - total flux cleaned = 3.76851e-05 Jy ! Total flux subtracted in 200 components = 3.76851e-05 Jy ! Clean residual min=-0.001771 max=0.001377 Jy/beam ! Clean residual mean=-0.000005 rms=0.000428 Jy/beam ! Combined flux in latest and established models = 0.0642612 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 87 components and 0.0642612 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077208Jy sigma=0.000756 ! Fit after self-cal, rms=0.077207Jy sigma=0.000756 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.003 mas, bmaj=12.09 mas, bpa=18.63 degrees ! Estimated noise=528.248 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.003 x 12.09 at 18.63 degrees (North through East) ! Clean map min=-0.0015156 max=0.057218 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.244 mas, bmaj=11.43 mas, bpa=20.96 degrees ! Estimated noise=750.323 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0434093 Jy ! Component: 100 - total flux cleaned = 0.0542996 Jy ! Component: 150 - total flux cleaned = 0.0590117 Jy ! Component: 200 - total flux cleaned = 0.061534 Jy ! Total flux subtracted in 200 components = 0.061534 Jy ! Clean residual min=-0.002274 max=0.002070 Jy/beam ! Clean residual mean=-0.000004 rms=0.000602 Jy/beam ! Combined flux in latest and established models = 0.061534 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.061534 Jy ! Inverting map and beam ! Estimated beam: bmin=4.003 mas, bmaj=12.09 mas, bpa=18.63 degrees ! Estimated noise=528.248 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00160732 Jy ! Component: 100 - total flux cleaned = 0.00202904 Jy ! Component: 150 - total flux cleaned = 0.00220821 Jy ! Component: 200 - total flux cleaned = 0.00235541 Jy ! Total flux subtracted in 200 components = 0.00235541 Jy ! Clean residual min=-0.001489 max=0.001471 Jy/beam ! Clean residual mean=-0.000003 rms=0.000388 Jy/beam ! Combined flux in latest and established models = 0.0638894 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 33 components and 0.0638894 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.828 mas, bmaj=15.6 mas, bpa=8.839 degrees ! Estimated noise=597.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000246435 Jy ! Component: 100 - total flux cleaned = 0.000278875 Jy ! Component: 150 - total flux cleaned = 0.000280651 Jy ! Component: 200 - total flux cleaned = 0.000273971 Jy ! Total flux subtracted in 200 components = 0.000273971 Jy ! Clean residual min=-0.001764 max=0.001379 Jy/beam ! Clean residual mean=-0.000005 rms=0.000431 Jy/beam ! Combined flux in latest and established models = 0.0641634 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.02732e-06 Jy ! Component: 100 - total flux cleaned = 1.16636e-05 Jy ! Component: 150 - total flux cleaned = 2.26638e-05 Jy ! Component: 200 - total flux cleaned = 3.28992e-05 Jy ! Total flux subtracted in 200 components = 3.28992e-05 Jy ! Clean residual min=-0.001765 max=0.001376 Jy/beam ! Clean residual mean=-0.000005 rms=0.000431 Jy/beam ! Combined flux in latest and established models = 0.0641963 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 49 components and 0.0641963 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.003 mas, bmaj=12.09 mas, bpa=18.63 degrees ! Estimated noise=528.248 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.61881e-06 Jy ! Component: 100 - total flux cleaned = 3.02004e-05 Jy ! Component: 150 - total flux cleaned = 4.53361e-05 Jy ! Component: 200 - total flux cleaned = 3.03616e-05 Jy ! Total flux subtracted in 200 components = 3.03616e-05 Jy ! Clean residual min=-0.001529 max=0.001438 Jy/beam ! Clean residual mean=-0.000003 rms=0.000382 Jy/beam ! Combined flux in latest and established models = 0.0642267 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 55 components and 0.0642267 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077216Jy sigma=0.000756 ! Fit after self-cal, rms=0.077217Jy sigma=0.000756 wmodel J2317-1122_S_2014_08_05_pus_map.mod ! Writing 55 model components to file: J2317-1122_S_2014_08_05_pus_map.mod wobs J2317-1122_S_2014_08_05_pus_uvs.fits ! Writing UV FITS file: J2317-1122_S_2014_08_05_pus_uvs.fits wwins J2317-1122_S_2014_08_05_pus_map.win ! wwins: Wrote 1 windows to J2317-1122_S_2014_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -3.87165e-05 Jy ! Component: 100 - total flux cleaned = 8.50379e-05 Jy ! Component: 150 - total flux cleaned = 0.000132582 Jy ! Component: 200 - total flux cleaned = 0.000110206 Jy ! Component: 250 - total flux cleaned = 0.000109891 Jy ! Component: 300 - total flux cleaned = 0.00012967 Jy ! Component: 350 - total flux cleaned = 0.000149058 Jy ! Component: 400 - total flux cleaned = 0.000129426 Jy ! Component: 450 - total flux cleaned = 0.000167712 Jy ! Component: 500 - total flux cleaned = 0.000149191 Jy ! Component: 550 - total flux cleaned = 0.000167521 Jy ! Component: 600 - total flux cleaned = 0.000149763 Jy ! Component: 650 - total flux cleaned = 0.000202163 Jy ! Component: 700 - total flux cleaned = 0.000236655 Jy ! Component: 750 - total flux cleaned = 0.000303331 Jy ! Component: 800 - total flux cleaned = 0.000302862 Jy ! Component: 850 - total flux cleaned = 0.000270544 Jy ! Component: 900 - total flux cleaned = 0.000176436 Jy ! Component: 950 - total flux cleaned = 0.000254178 Jy ! Component: 1000 - total flux cleaned = 0.00020842 Jy ! Component: 1050 - total flux cleaned = 0.000238721 Jy ! Component: 1100 - total flux cleaned = 0.000253491 Jy ! Component: 1150 - total flux cleaned = 0.000165761 Jy ! Component: 1200 - total flux cleaned = 0.000165727 Jy ! Component: 1250 - total flux cleaned = 0.000123184 Jy ! Component: 1300 - total flux cleaned = 0.000123229 Jy ! Component: 1350 - total flux cleaned = 6.80278e-05 Jy ! Component: 1400 - total flux cleaned = 4.07242e-05 Jy ! Component: 1450 - total flux cleaned = 3e-07 Jy ! Component: 1500 - total flux cleaned = -7.94691e-05 Jy ! Component: 1550 - total flux cleaned = -9.24877e-05 Jy ! Component: 1600 - total flux cleaned = -0.000118396 Jy ! Component: 1650 - total flux cleaned = -0.000144341 Jy ! Component: 1700 - total flux cleaned = -0.000182372 Jy ! Component: 1750 - total flux cleaned = -0.000270329 Jy ! Component: 1800 - total flux cleaned = -0.000307417 Jy ! Component: 1850 - total flux cleaned = -0.000331937 Jy ! Component: 1900 - total flux cleaned = -0.000344077 Jy ! Component: 1950 - total flux cleaned = -0.000404417 Jy ! Component: 2000 - total flux cleaned = -0.00045196 Jy ! Component: 2050 - total flux cleaned = -0.000499079 Jy ! Component: 2100 - total flux cleaned = -0.000522464 Jy ! Component: 2150 - total flux cleaned = -0.000614664 Jy ! Component: 2200 - total flux cleaned = -0.000637543 Jy ! Component: 2250 - total flux cleaned = -0.000637501 Jy ! Component: 2300 - total flux cleaned = -0.000704862 Jy ! Component: 2350 - total flux cleaned = -0.000704991 Jy ! Component: 2400 - total flux cleaned = -0.000771201 Jy ! Component: 2450 - total flux cleaned = -0.000771242 Jy ! Component: 2500 - total flux cleaned = -0.000793018 Jy ! Component: 2550 - total flux cleaned = -0.000814375 Jy ! Component: 2600 - total flux cleaned = -0.00082503 Jy ! Component: 2650 - total flux cleaned = -0.000846147 Jy ! Component: 2700 - total flux cleaned = -0.000887697 Jy ! Component: 2750 - total flux cleaned = -0.000887779 Jy ! Component: 2800 - total flux cleaned = -0.000939301 Jy ! Component: 2850 - total flux cleaned = -0.000949325 Jy ! Component: 2900 - total flux cleaned = -0.000999915 Jy ! Component: 2950 - total flux cleaned = -0.00102002 Jy ! Component: 3000 - total flux cleaned = -0.00103009 Jy ! Component: 3050 - total flux cleaned = -0.00105957 Jy ! Component: 3100 - total flux cleaned = -0.00110845 Jy ! Component: 3150 - total flux cleaned = -0.00118595 Jy ! Component: 3200 - total flux cleaned = -0.00120523 Jy ! Component: 3250 - total flux cleaned = -0.00126248 Jy ! Component: 3300 - total flux cleaned = -0.0013004 Jy ! Component: 3350 - total flux cleaned = -0.00132857 Jy ! Component: 3400 - total flux cleaned = -0.00137523 Jy ! Component: 3450 - total flux cleaned = -0.00145834 Jy ! Component: 3500 - total flux cleaned = -0.00148587 Jy ! Component: 3550 - total flux cleaned = -0.00148591 Jy ! Component: 3600 - total flux cleaned = -0.00150407 Jy ! Component: 3650 - total flux cleaned = -0.00152215 Jy ! Component: 3700 - total flux cleaned = -0.00159356 Jy ! Component: 3750 - total flux cleaned = -0.00159359 Jy ! Component: 3800 - total flux cleaned = -0.00163774 Jy ! Component: 3850 - total flux cleaned = -0.00168149 Jy ! Component: 3900 - total flux cleaned = -0.00169877 Jy ! Component: 3950 - total flux cleaned = -0.00169876 Jy ! Component: 4000 - total flux cleaned = -0.0017588 Jy ! Component: 4050 - total flux cleaned = -0.00179285 Jy ! Total flux subtracted in 4096 components = -0.00180137 Jy ! Clean residual min=-0.000479 max=0.000582 Jy/beam ! Clean residual mean=-0.000002 rms=0.000165 Jy/beam ! Combined flux in latest and established models = 0.0624253 Jy keep ! Adding 290 model components to the UV plane model. ! The established model now contains 345 components and 0.0624253 Jy ![Exited script file: muppet] wmap "J2317-1122_S_2014_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.003 x 12.09 at 18.63 degrees (North through East) ! Clean map min=-0.001065 max=0.056825 Jy/beam ! Writing clean map to FITS file: J2317-1122_S_2014_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0568255 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000162419 device "J2317-1122_S_2014_08_05_pus\_map.eps/VPS" ! Attempting to open device: 'J2317-1122_S_2014_08_05_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.857462 0.857462 1.71492 3.42985 6.85969 13.7194 27.4388 54.8776 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.056 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.003 x 12.09 at 18.63 degrees (North through East) ! Clean map min=-0.001065 max=0.056825 Jy/beam quit ! Quitting program ! Log file J2317-1122_S_2014_08_05_pus_uvs.log closed on Sun Nov 13 17:40:52 2016