! Started logfile: J2316-4337_S_2015_01_23_pus_uvs.log on Mon Jan 2 19:38:23 2017 obs J2316-4337_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J2316-4337_S_2015_01_23_pus_uva.fits ! AN table 1: 115 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.61314 visibilities/baseline/integration-bin. ! Found source: J2316-4337 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 12692 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2316-4337_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 238 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 238 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 238 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 238 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.604174Jy sigma=0.005267 ! Fit after self-cal, rms=1.534442Jy sigma=0.004852 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.007 mas, bmaj=6.356 mas, bpa=-6.688 degrees ! Estimated noise=2093.61 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.14663 Jy ! Component: 100 - total flux cleaned = 0.234099 Jy ! Total flux subtracted in 100 components = 0.234099 Jy ! Clean residual min=-0.020643 max=0.052492 Jy/beam ! Clean residual mean=-0.000465 rms=0.009993 Jy/beam ! Combined flux in latest and established models = 0.234099 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 39 components and 0.234099 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.465806Jy sigma=0.001673 ! Fit after self-cal, rms=1.465204Jy sigma=0.001669 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.651 mas, bmaj=7.512 mas, bpa=-6.377 degrees ! Estimated noise=1120.6 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.14347 Jy ! Component: 100 - total flux cleaned = 0.217175 Jy ! Component: 150 - total flux cleaned = 0.25542 Jy ! Component: 200 - total flux cleaned = 0.275264 Jy ! Total flux subtracted in 200 components = 0.275264 Jy ! Clean residual min=-0.032700 max=0.067249 Jy/beam ! Clean residual mean=-0.001321 rms=0.013541 Jy/beam ! Combined flux in latest and established models = 0.509362 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 58 components and 0.509362 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.419578Jy sigma=0.001156 ! Fit after self-cal, rms=1.419348Jy sigma=0.001146 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.07 HN 1.00* KP 0.96 ! LA 0.90 MK 1.01 NL 2.18 OV 1.12 ! PT 0.86 SC 1.57 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.23 HN 1.00* KP 0.91 ! LA 0.87 MK 1.07 NL 2.33 OV 1.14 ! PT 0.86 SC 1.61 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.46 HN 1.00* KP 0.78 ! LA 0.71 MK 1.03 NL 2.20 OV 1.07 ! PT 0.85 SC 1.46 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.09 HN 1.00* KP 0.74 ! LA 0.75 MK 1.04 NL 2.04 OV 1.13 ! PT 0.90 SC 1.33 ! ! ! Fit before self-cal, rms=1.419348Jy sigma=0.001146 ! Fit after self-cal, rms=2.104205Jy sigma=0.000849 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.852 mas, bmaj=7.934 mas, bpa=-9.523 degrees ! Estimated noise=1256.62 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0120955 Jy ! Component: 100 - total flux cleaned = 0.0157549 Jy ! Component: 150 - total flux cleaned = 0.0162869 Jy ! Component: 200 - total flux cleaned = 0.0166432 Jy ! Total flux subtracted in 200 components = 0.0166432 Jy ! Clean residual min=-0.017023 max=0.027306 Jy/beam ! Clean residual mean=-0.000295 rms=0.006178 Jy/beam ! Combined flux in latest and established models = 0.526006 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 64 components and 0.526006 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.102239Jy sigma=0.000853 ! Fit after self-cal, rms=2.105040Jy sigma=0.000849 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.105040Jy sigma=0.000849 ! Fit after self-cal, rms=2.479329Jy sigma=0.000846 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.902 mas, bmaj=8.06 mas, bpa=-10.15 degrees ! Estimated noise=1342.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0146158 Jy ! Component: 100 - total flux cleaned = 0.0204702 Jy ! Component: 150 - total flux cleaned = 0.0215389 Jy ! Component: 200 - total flux cleaned = 0.0218848 Jy ! Total flux subtracted in 200 components = 0.0218848 Jy ! Clean residual min=-0.019041 max=0.029693 Jy/beam ! Clean residual mean=-0.000274 rms=0.006807 Jy/beam ! Combined flux in latest and established models = 0.54789 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 68 components and 0.54789 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.476889Jy sigma=0.000850 ! Fit after self-cal, rms=2.477050Jy sigma=0.000850 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (13.5, 18.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0272041 Jy ! Component: 100 - total flux cleaned = 0.0394235 Jy ! Component: 150 - total flux cleaned = 0.0459592 Jy ! Component: 200 - total flux cleaned = 0.0486678 Jy ! Total flux subtracted in 200 components = 0.0486678 Jy ! Clean residual min=-0.020025 max=0.020795 Jy/beam ! Clean residual mean=0.000073 rms=0.005905 Jy/beam ! Combined flux in latest and established models = 0.596558 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 95 components and 0.596558 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.474896Jy sigma=0.000830 ! Fit after self-cal, rms=2.474757Jy sigma=0.000827 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.474757Jy sigma=0.000827 ! Fit after self-cal, rms=0.502392Jy sigma=0.000793 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.889 mas, bmaj=7.939 mas, bpa=-10.28 degrees ! Estimated noise=1320.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00893099 Jy ! Component: 100 - total flux cleaned = 0.0104983 Jy ! Component: 150 - total flux cleaned = 0.0105034 Jy ! Component: 200 - total flux cleaned = 0.0106567 Jy ! Total flux subtracted in 200 components = 0.0106567 Jy ! Clean residual min=-0.010112 max=0.014784 Jy/beam ! Clean residual mean=-0.000103 rms=0.003254 Jy/beam ! Combined flux in latest and established models = 0.607215 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 105 components and 0.607215 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.502014Jy sigma=0.000791 ! Fit after self-cal, rms=0.501129Jy sigma=0.000790 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00294293 Jy ! Component: 100 - total flux cleaned = 0.00294168 Jy ! Component: 150 - total flux cleaned = 0.00280836 Jy ! Component: 200 - total flux cleaned = 0.002563 Jy ! Total flux subtracted in 200 components = 0.002563 Jy ! Clean residual min=-0.009581 max=0.013176 Jy/beam ! Clean residual mean=-0.000081 rms=0.003168 Jy/beam ! Combined flux in latest and established models = 0.609778 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 108 components and 0.609778 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.500962Jy sigma=0.000790 ! Fit after self-cal, rms=0.500981Jy sigma=0.000790 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.500981Jy sigma=0.000790 ! Fit after self-cal, rms=0.500313Jy sigma=0.000789 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.524 mas, bmaj=30.75 mas, bpa=-7.555 degrees ! Estimated noise=1671.59 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00202433 Jy ! Component: 100 - total flux cleaned = 0.0026323 Jy ! Component: 150 - total flux cleaned = 0.00310349 Jy ! Component: 200 - total flux cleaned = 0.00325067 Jy ! Total flux subtracted in 200 components = 0.00325067 Jy ! Clean residual min=-0.012319 max=0.015709 Jy/beam ! Clean residual mean=-0.000195 rms=0.005209 Jy/beam ! Combined flux in latest and established models = 0.613029 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 114 components and 0.613029 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.500247Jy sigma=0.000789 ! Fit after self-cal, rms=0.500317Jy sigma=0.000789 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000743693 Jy ! Component: 100 - total flux cleaned = 0.000454502 Jy ! Component: 150 - total flux cleaned = 0.000524823 Jy ! Component: 200 - total flux cleaned = 0.000516108 Jy ! Total flux subtracted in 200 components = 0.000516108 Jy ! Clean residual min=-0.012504 max=0.015363 Jy/beam ! Clean residual mean=-0.000180 rms=0.005132 Jy/beam ! Combined flux in latest and established models = 0.613545 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 117 components and 0.613545 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.500263Jy sigma=0.000789 ! Fit after self-cal, rms=0.500358Jy sigma=0.000789 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.87 mas, bmaj=7.858 mas, bpa=-10.25 degrees ! Estimated noise=1305.66 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.87 x 7.858 at -10.25 degrees (North through East) ! Clean map min=-0.010122 max=0.26957 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.116 mas, bmaj=6.357 mas, bpa=-9.436 degrees ! Estimated noise=2655.33 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.183395 Jy ! Component: 100 - total flux cleaned = 0.292433 Jy ! Component: 150 - total flux cleaned = 0.366838 Jy ! Component: 200 - total flux cleaned = 0.418499 Jy ! Total flux subtracted in 200 components = 0.418499 Jy ! Clean residual min=-0.016980 max=0.032613 Jy/beam ! Clean residual mean=-0.000344 rms=0.006056 Jy/beam ! Combined flux in latest and established models = 0.418499 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 56 model components to the UV plane model. ! The established model now contains 56 components and 0.418499 Jy ! Inverting map and beam ! Estimated beam: bmin=2.87 mas, bmaj=7.858 mas, bpa=-10.25 degrees ! Estimated noise=1305.66 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1, 10). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0676482 Jy ! Component: 100 - total flux cleaned = 0.104778 Jy ! Component: 150 - total flux cleaned = 0.130116 Jy ! Component: 200 - total flux cleaned = 0.148553 Jy ! Total flux subtracted in 200 components = 0.148553 Jy ! Clean residual min=-0.011028 max=0.014486 Jy/beam ! Clean residual mean=-0.000382 rms=0.003869 Jy/beam ! Combined flux in latest and established models = 0.567052 Jy ! Adding 81 model components to the UV plane model. ! The established model now contains 123 components and 0.567052 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.524 mas, bmaj=30.75 mas, bpa=-7.555 degrees ! Estimated noise=1671.59 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0223659 Jy ! Component: 100 - total flux cleaned = 0.0346238 Jy ! Component: 150 - total flux cleaned = 0.0418462 Jy ! Component: 200 - total flux cleaned = 0.046285 Jy ! Total flux subtracted in 200 components = 0.046285 Jy ! Clean residual min=-0.012342 max=0.013822 Jy/beam ! Clean residual mean=-0.000167 rms=0.005050 Jy/beam ! Combined flux in latest and established models = 0.613337 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00125753 Jy ! Component: 100 - total flux cleaned = 0.00181757 Jy ! Component: 150 - total flux cleaned = 0.00222963 Jy ! Component: 200 - total flux cleaned = 0.0026231 Jy ! Total flux subtracted in 200 components = 0.0026231 Jy ! Clean residual min=-0.011961 max=0.014005 Jy/beam ! Clean residual mean=-0.000132 rms=0.004956 Jy/beam ! Combined flux in latest and established models = 0.61596 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 151 components and 0.61596 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.87 mas, bmaj=7.858 mas, bpa=-10.25 degrees ! Estimated noise=1305.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0035625 Jy ! Component: 100 - total flux cleaned = -0.00330556 Jy ! Component: 150 - total flux cleaned = -0.00223529 Jy ! Component: 200 - total flux cleaned = -0.00114306 Jy ! Total flux subtracted in 200 components = -0.00114306 Jy ! Clean residual min=-0.008907 max=0.012330 Jy/beam ! Clean residual mean=-0.000082 rms=0.002891 Jy/beam ! Combined flux in latest and established models = 0.614817 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 168 components and 0.614817 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.499755Jy sigma=0.000788 ! Fit after self-cal, rms=0.499509Jy sigma=0.000787 wmodel J2316-4337_S_2015_01_23_pus_map.mod ! Writing 168 model components to file: J2316-4337_S_2015_01_23_pus_map.mod wobs J2316-4337_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J2316-4337_S_2015_01_23_pus_uvs.fits wwins J2316-4337_S_2015_01_23_pus_map.win ! wwins: Wrote 3 windows to J2316-4337_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00466918 Jy ! Component: 100 - total flux cleaned = 0.00468653 Jy ! Component: 150 - total flux cleaned = 0.00497095 Jy ! Component: 200 - total flux cleaned = 0.00537949 Jy ! Component: 250 - total flux cleaned = 0.00538339 Jy ! Component: 300 - total flux cleaned = 0.0056316 Jy ! Component: 350 - total flux cleaned = 0.00562896 Jy ! Component: 400 - total flux cleaned = 0.00608937 Jy ! Component: 450 - total flux cleaned = 0.00642332 Jy ! Component: 500 - total flux cleaned = 0.00674495 Jy ! Component: 550 - total flux cleaned = 0.00695184 Jy ! Component: 600 - total flux cleaned = 0.00725045 Jy ! Component: 650 - total flux cleaned = 0.00725057 Jy ! Component: 700 - total flux cleaned = 0.00744155 Jy ! Component: 750 - total flux cleaned = 0.00762734 Jy ! Component: 800 - total flux cleaned = 0.00789444 Jy ! Component: 850 - total flux cleaned = 0.00806608 Jy ! Component: 900 - total flux cleaned = 0.0084891 Jy ! Component: 950 - total flux cleaned = 0.00857068 Jy ! Component: 1000 - total flux cleaned = 0.00865314 Jy ! Component: 1050 - total flux cleaned = 0.00857358 Jy ! Component: 1100 - total flux cleaned = 0.00872556 Jy ! Component: 1150 - total flux cleaned = 0.00857468 Jy ! Component: 1200 - total flux cleaned = 0.00864859 Jy ! Component: 1250 - total flux cleaned = 0.00843059 Jy ! Component: 1300 - total flux cleaned = 0.00828807 Jy ! Component: 1350 - total flux cleaned = 0.00821891 Jy ! Component: 1400 - total flux cleaned = 0.00821694 Jy ! Component: 1450 - total flux cleaned = 0.00801207 Jy ! Component: 1500 - total flux cleaned = 0.0079446 Jy ! Component: 1550 - total flux cleaned = 0.00781374 Jy ! Component: 1600 - total flux cleaned = 0.00781458 Jy ! Component: 1650 - total flux cleaned = 0.00775169 Jy ! Component: 1700 - total flux cleaned = 0.00750467 Jy ! Component: 1750 - total flux cleaned = 0.00744455 Jy ! Component: 1800 - total flux cleaned = 0.00720432 Jy ! Component: 1850 - total flux cleaned = 0.00714654 Jy ! Component: 1900 - total flux cleaned = 0.00685541 Jy ! Component: 1950 - total flux cleaned = 0.00651068 Jy ! Component: 2000 - total flux cleaned = 0.00662464 Jy ! Component: 2050 - total flux cleaned = 0.00662347 Jy ! Component: 2100 - total flux cleaned = 0.00645716 Jy ! Component: 2150 - total flux cleaned = 0.00629251 Jy ! Component: 2200 - total flux cleaned = 0.00613131 Jy ! Component: 2250 - total flux cleaned = 0.00597225 Jy ! Component: 2300 - total flux cleaned = 0.00592031 Jy ! Component: 2350 - total flux cleaned = 0.00612851 Jy ! Component: 2400 - total flux cleaned = 0.00602458 Jy ! Component: 2450 - total flux cleaned = 0.00597359 Jy ! Component: 2500 - total flux cleaned = 0.00602406 Jy ! Component: 2550 - total flux cleaned = 0.00612379 Jy ! Component: 2600 - total flux cleaned = 0.00587688 Jy ! Component: 2650 - total flux cleaned = 0.00597497 Jy ! Component: 2700 - total flux cleaned = 0.00582989 Jy ! Component: 2750 - total flux cleaned = 0.0058307 Jy ! Component: 2800 - total flux cleaned = 0.00597255 Jy ! Component: 2850 - total flux cleaned = 0.00592464 Jy ! Component: 2900 - total flux cleaned = 0.00587843 Jy ! Component: 2950 - total flux cleaned = 0.00574117 Jy ! Component: 3000 - total flux cleaned = 0.00596962 Jy ! Component: 3050 - total flux cleaned = 0.00601471 Jy ! Component: 3100 - total flux cleaned = 0.00605899 Jy ! Component: 3150 - total flux cleaned = 0.00619149 Jy ! Component: 3200 - total flux cleaned = 0.00601631 Jy ! Component: 3250 - total flux cleaned = 0.00614682 Jy ! Component: 3300 - total flux cleaned = 0.00614745 Jy ! Component: 3350 - total flux cleaned = 0.0063181 Jy ! Component: 3400 - total flux cleaned = 0.00627558 Jy ! Component: 3450 - total flux cleaned = 0.00631772 Jy ! Component: 3500 - total flux cleaned = 0.00640028 Jy ! Component: 3550 - total flux cleaned = 0.00635891 Jy ! Component: 3600 - total flux cleaned = 0.00644017 Jy ! Component: 3650 - total flux cleaned = 0.00643962 Jy ! Component: 3700 - total flux cleaned = 0.00659977 Jy ! Component: 3750 - total flux cleaned = 0.00648038 Jy ! Component: 3800 - total flux cleaned = 0.00651959 Jy ! Component: 3850 - total flux cleaned = 0.00651951 Jy ! Component: 3900 - total flux cleaned = 0.0065585 Jy ! Component: 3950 - total flux cleaned = 0.00655812 Jy ! Component: 4000 - total flux cleaned = 0.00652032 Jy ! Component: 4050 - total flux cleaned = 0.00655831 Jy ! Total flux subtracted in 4096 components = 0.00670825 Jy ! Clean residual min=-0.002140 max=0.002143 Jy/beam ! Clean residual mean=0.000002 rms=0.000737 Jy/beam ! Combined flux in latest and established models = 0.621525 Jy keep ! Adding 294 model components to the UV plane model. ! The established model now contains 462 components and 0.621525 Jy ![Exited script file: muppet] wmap "J2316-4337_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.87 x 7.858 at -10.25 degrees (North through East) ! Clean map min=-0.0067558 max=0.26144 Jy/beam ! Writing clean map to FITS file: J2316-4337_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.26144 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000729004 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.836527 0.836527 1.67305 3.34611 6.69221 13.3844 26.7688 53.5377 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0021 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.261 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.87 x 7.858 at -10.25 degrees (North through East) ! Clean map min=-0.0067558 max=0.26144 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2316-4337_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 19:38:28 2017