! Started logfile: J2313-4729_S_2015_01_23_pus_uvs.log on Mon Jan 2 19:38:18 2017 obs J2313-4729_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J2313-4729_S_2015_01_23_pus_uva.fits ! AN table 1: 122 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.45592 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2313-4729 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 10012 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2313-4729_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 377 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 377 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 377 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 377 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.774570Jy sigma=0.004499 ! Fit after self-cal, rms=0.660484Jy sigma=0.003688 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.965 mas, bmaj=6.417 mas, bpa=-4.868 degrees ! Estimated noise=2018.63 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.254417 Jy ! Component: 100 - total flux cleaned = 0.363792 Jy ! Total flux subtracted in 100 components = 0.363792 Jy ! Clean residual min=-0.044950 max=0.110650 Jy/beam ! Clean residual mean=-0.000352 rms=0.013542 Jy/beam ! Combined flux in latest and established models = 0.363792 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.363792 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.320511Jy sigma=0.001739 ! Fit after self-cal, rms=0.320276Jy sigma=0.001739 ! Inverting map ! Added new window around map position (2, -19). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0925177 Jy ! Component: 100 - total flux cleaned = 0.138423 Jy ! Total flux subtracted in 100 components = 0.138423 Jy ! Clean residual min=-0.028476 max=0.034841 Jy/beam ! Clean residual mean=-0.000261 rms=0.008352 Jy/beam ! Combined flux in latest and established models = 0.502215 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 43 components and 0.502215 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.272999Jy sigma=0.001318 ! Fit after self-cal, rms=0.271887Jy sigma=0.001312 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.611 mas, bmaj=7.506 mas, bpa=-4.781 degrees ! Estimated noise=1247.89 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0882345 Jy ! Component: 100 - total flux cleaned = 0.133796 Jy ! Component: 150 - total flux cleaned = 0.157648 Jy ! Component: 200 - total flux cleaned = 0.170202 Jy ! Total flux subtracted in 200 components = 0.170202 Jy ! Clean residual min=-0.028311 max=0.048117 Jy/beam ! Clean residual mean=-0.001021 rms=0.012215 Jy/beam ! Combined flux in latest and established models = 0.672416 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 78 components and 0.672416 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.255841Jy sigma=0.001045 ! Fit after self-cal, rms=0.255452Jy sigma=0.001044 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.43 HN 1.00* KP 1.01 ! LA 0.96 MK 1.03 NL 1.00* OV 1.11 ! PT 0.96 SC 0.99 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.66 HN 1.00* KP 0.95 ! LA 0.93 MK 1.00 NL 1.00* OV 1.15 ! PT 0.94 SC 1.04 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.86 HN 1.00* KP 0.81 ! LA 0.76 MK 1.05 NL 1.00* OV 1.08 ! PT 0.94 SC 1.01 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.69 HN 1.00* KP 0.76 ! LA 0.79 MK 1.03 NL 1.00* OV 1.17 ! PT 0.98 SC 1.01 ! ! ! Fit before self-cal, rms=0.255452Jy sigma=0.001044 ! Fit after self-cal, rms=0.315562Jy sigma=0.000823 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.632 mas, bmaj=7.512 mas, bpa=-4.685 degrees ! Estimated noise=1248.93 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (13.5, -18.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0132918 Jy ! Component: 100 - total flux cleaned = 0.0147314 Jy ! Component: 150 - total flux cleaned = 0.0149195 Jy ! Component: 200 - total flux cleaned = 0.0152455 Jy ! Total flux subtracted in 200 components = 0.0152455 Jy ! Clean residual min=-0.009924 max=0.014128 Jy/beam ! Clean residual mean=-0.000169 rms=0.002807 Jy/beam ! Combined flux in latest and established models = 0.687662 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 100 components and 0.687662 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.314579Jy sigma=0.000817 ! Fit after self-cal, rms=0.315696Jy sigma=0.000815 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.315696Jy sigma=0.000815 ! Fit after self-cal, rms=0.316446Jy sigma=0.000813 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.636 mas, bmaj=7.518 mas, bpa=-4.652 degrees ! Estimated noise=1255.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0077706 Jy ! Component: 100 - total flux cleaned = 0.00826624 Jy ! Component: 150 - total flux cleaned = 0.00852546 Jy ! Component: 200 - total flux cleaned = 0.00864304 Jy ! Total flux subtracted in 200 components = 0.00864304 Jy ! Clean residual min=-0.008281 max=0.013681 Jy/beam ! Clean residual mean=-0.000208 rms=0.002504 Jy/beam ! Combined flux in latest and established models = 0.696305 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 107 components and 0.696305 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.315958Jy sigma=0.000811 ! Fit after self-cal, rms=0.315854Jy sigma=0.000811 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-10, -58.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0109662 Jy ! Component: 100 - total flux cleaned = 0.0162845 Jy ! Component: 150 - total flux cleaned = 0.0201017 Jy ! Component: 200 - total flux cleaned = 0.0229138 Jy ! Total flux subtracted in 200 components = 0.0229138 Jy ! Clean residual min=-0.006442 max=0.006909 Jy/beam ! Clean residual mean=0.000004 rms=0.001981 Jy/beam ! Combined flux in latest and established models = 0.719219 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 136 components and 0.719219 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.315134Jy sigma=0.000806 ! Fit after self-cal, rms=0.315112Jy sigma=0.000806 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.315112Jy sigma=0.000806 ! Fit after self-cal, rms=0.308370Jy sigma=0.000803 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.631 mas, bmaj=7.498 mas, bpa=-4.532 degrees ! Estimated noise=1251.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00512018 Jy ! Component: 100 - total flux cleaned = 0.00856594 Jy ! Component: 150 - total flux cleaned = 0.0108947 Jy ! Component: 200 - total flux cleaned = 0.0120618 Jy ! Total flux subtracted in 200 components = 0.0120618 Jy ! Clean residual min=-0.005537 max=0.005928 Jy/beam ! Clean residual mean=-0.000080 rms=0.001637 Jy/beam ! Combined flux in latest and established models = 0.73128 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 165 components and 0.73128 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.308114Jy sigma=0.000802 ! Fit after self-cal, rms=0.308056Jy sigma=0.000802 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00116462 Jy ! Component: 100 - total flux cleaned = 0.00184031 Jy ! Component: 150 - total flux cleaned = 0.00201666 Jy ! Component: 200 - total flux cleaned = 0.00201882 Jy ! Total flux subtracted in 200 components = 0.00201882 Jy ! Clean residual min=-0.005654 max=0.005902 Jy/beam ! Clean residual mean=-0.000060 rms=0.001619 Jy/beam ! Combined flux in latest and established models = 0.733299 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 177 components and 0.733299 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.307972Jy sigma=0.000802 ! Fit after self-cal, rms=0.307969Jy sigma=0.000802 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.307969Jy sigma=0.000802 ! Fit after self-cal, rms=0.307715Jy sigma=0.000802 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.17 mas, bmaj=30.1 mas, bpa=-6.158 degrees ! Estimated noise=1811.34 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00432536 Jy ! Component: 100 - total flux cleaned = 0.00559286 Jy ! Component: 150 - total flux cleaned = 0.0056848 Jy ! Component: 200 - total flux cleaned = 0.00568789 Jy ! Total flux subtracted in 200 components = 0.00568789 Jy ! Clean residual min=-0.008756 max=0.008410 Jy/beam ! Clean residual mean=-0.000147 rms=0.002809 Jy/beam ! Combined flux in latest and established models = 0.738987 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 182 components and 0.738987 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.307662Jy sigma=0.000802 ! Fit after self-cal, rms=0.307642Jy sigma=0.000802 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00118589 Jy ! Component: 100 - total flux cleaned = 0.000965449 Jy ! Component: 150 - total flux cleaned = 0.000689374 Jy ! Component: 200 - total flux cleaned = 0.00042647 Jy ! Total flux subtracted in 200 components = 0.00042647 Jy ! Clean residual min=-0.008555 max=0.008392 Jy/beam ! Clean residual mean=-0.000131 rms=0.002750 Jy/beam ! Combined flux in latest and established models = 0.739413 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 187 components and 0.739413 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.307642Jy sigma=0.000802 ! Fit after self-cal, rms=0.307650Jy sigma=0.000802 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.629 mas, bmaj=7.49 mas, bpa=-4.48 degrees ! Estimated noise=1250.5 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.629 x 7.49 at -4.48 degrees (North through East) ! Clean map min=-0.0051107 max=0.33014 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.968 mas, bmaj=6.372 mas, bpa=-4.475 degrees ! Estimated noise=2035.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.269558 Jy ! Component: 100 - total flux cleaned = 0.381808 Jy ! Component: 150 - total flux cleaned = 0.450821 Jy ! Component: 200 - total flux cleaned = 0.501099 Jy ! Total flux subtracted in 200 components = 0.501099 Jy ! Clean residual min=-0.025299 max=0.033753 Jy/beam ! Clean residual mean=-0.000279 rms=0.006555 Jy/beam ! Combined flux in latest and established models = 0.501099 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 37 model components to the UV plane model. ! The established model now contains 37 components and 0.501099 Jy ! Inverting map and beam ! Estimated beam: bmin=2.629 mas, bmaj=7.49 mas, bpa=-4.48 degrees ! Estimated noise=1250.5 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4, -10.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0864983 Jy ! Component: 100 - total flux cleaned = 0.131784 Jy ! Component: 150 - total flux cleaned = 0.157805 Jy ! Component: 200 - total flux cleaned = 0.175557 Jy ! Total flux subtracted in 200 components = 0.175557 Jy ! Clean residual min=-0.007931 max=0.017282 Jy/beam ! Clean residual mean=-0.000624 rms=0.003285 Jy/beam ! Combined flux in latest and established models = 0.676656 Jy ! Adding 67 model components to the UV plane model. ! The established model now contains 98 components and 0.676656 Jy ! Inverting map ! Added new window around map position (-8, 9.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0162353 Jy ! Component: 100 - total flux cleaned = 0.0267289 Jy ! Component: 150 - total flux cleaned = 0.0345064 Jy ! Component: 200 - total flux cleaned = 0.0404754 Jy ! Total flux subtracted in 200 components = 0.0404754 Jy ! Clean residual min=-0.005817 max=0.005207 Jy/beam ! Clean residual mean=-0.000257 rms=0.001622 Jy/beam ! Combined flux in latest and established models = 0.717131 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 138 components and 0.717131 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.17 mas, bmaj=30.1 mas, bpa=-6.158 degrees ! Estimated noise=1811.34 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00822128 Jy ! Component: 100 - total flux cleaned = 0.0135672 Jy ! Component: 150 - total flux cleaned = 0.0171394 Jy ! Component: 200 - total flux cleaned = 0.0195722 Jy ! Total flux subtracted in 200 components = 0.0195722 Jy ! Clean residual min=-0.008344 max=0.009114 Jy/beam ! Clean residual mean=-0.000184 rms=0.002793 Jy/beam ! Combined flux in latest and established models = 0.736704 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000308902 Jy ! Component: 100 - total flux cleaned = 0.0004494 Jy ! Component: 150 - total flux cleaned = 0.000588952 Jy ! Component: 200 - total flux cleaned = 0.000723273 Jy ! Total flux subtracted in 200 components = 0.000723273 Jy ! Clean residual min=-0.008237 max=0.009115 Jy/beam ! Clean residual mean=-0.000165 rms=0.002741 Jy/beam ! Combined flux in latest and established models = 0.737427 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 176 components and 0.737427 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.629 mas, bmaj=7.49 mas, bpa=-4.48 degrees ! Estimated noise=1250.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00103696 Jy ! Component: 100 - total flux cleaned = 0.00115968 Jy ! Component: 150 - total flux cleaned = 0.00125949 Jy ! Component: 200 - total flux cleaned = 0.0012614 Jy ! Total flux subtracted in 200 components = 0.0012614 Jy ! Clean residual min=-0.004991 max=0.005676 Jy/beam ! Clean residual mean=-0.000062 rms=0.001463 Jy/beam ! Combined flux in latest and established models = 0.738688 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 197 components and 0.738688 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.307352Jy sigma=0.000801 ! Fit after self-cal, rms=0.307320Jy sigma=0.000801 wmodel J2313-4729_S_2015_01_23_pus_map.mod ! Writing 197 model components to file: J2313-4729_S_2015_01_23_pus_map.mod wobs J2313-4729_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J2313-4729_S_2015_01_23_pus_uvs.fits wwins J2313-4729_S_2015_01_23_pus_map.win ! wwins: Wrote 6 windows to J2313-4729_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00174036 Jy ! Component: 100 - total flux cleaned = 0.00183241 Jy ! Component: 150 - total flux cleaned = 0.00167575 Jy ! Component: 200 - total flux cleaned = 0.00160506 Jy ! Component: 250 - total flux cleaned = 0.00120262 Jy ! Component: 300 - total flux cleaned = 0.000885033 Jy ! Component: 350 - total flux cleaned = 0.000399854 Jy ! Component: 400 - total flux cleaned = 5.00971e-05 Jy ! Component: 450 - total flux cleaned = -0.000342063 Jy ! Component: 500 - total flux cleaned = -0.000559023 Jy ! Component: 550 - total flux cleaned = -0.000925339 Jy ! Component: 600 - total flux cleaned = -0.00107578 Jy ! Component: 650 - total flux cleaned = -0.00127351 Jy ! Component: 700 - total flux cleaned = -0.00146799 Jy ! Component: 750 - total flux cleaned = -0.00194163 Jy ! Component: 800 - total flux cleaned = -0.00217271 Jy ! Component: 850 - total flux cleaned = -0.00253583 Jy ! Component: 900 - total flux cleaned = -0.00289056 Jy ! Component: 950 - total flux cleaned = -0.00310811 Jy ! Component: 1000 - total flux cleaned = -0.00340715 Jy ! Component: 1050 - total flux cleaned = -0.00370095 Jy ! Component: 1100 - total flux cleaned = -0.00398919 Jy ! Component: 1150 - total flux cleaned = -0.00427307 Jy ! Component: 1200 - total flux cleaned = -0.00459245 Jy ! Component: 1250 - total flux cleaned = -0.00498519 Jy ! Component: 1300 - total flux cleaned = -0.00525563 Jy ! Component: 1350 - total flux cleaned = -0.00548384 Jy ! Component: 1400 - total flux cleaned = -0.00563421 Jy ! Component: 1450 - total flux cleaned = -0.00578284 Jy ! Component: 1500 - total flux cleaned = -0.00592985 Jy ! Component: 1550 - total flux cleaned = -0.00614784 Jy ! Component: 1600 - total flux cleaned = -0.00632723 Jy ! Component: 1650 - total flux cleaned = -0.00646887 Jy ! Component: 1700 - total flux cleaned = -0.00667917 Jy ! Component: 1750 - total flux cleaned = -0.00688751 Jy ! Component: 1800 - total flux cleaned = -0.00712752 Jy ! Component: 1850 - total flux cleaned = -0.00722929 Jy ! Component: 1900 - total flux cleaned = -0.00743085 Jy ! Component: 1950 - total flux cleaned = -0.00756397 Jy ! Component: 2000 - total flux cleaned = -0.00772893 Jy ! Component: 2050 - total flux cleaned = -0.00792491 Jy ! Component: 2100 - total flux cleaned = -0.00805455 Jy ! Component: 2150 - total flux cleaned = -0.00824673 Jy ! Component: 2200 - total flux cleaned = -0.00843734 Jy ! Component: 2250 - total flux cleaned = -0.00862617 Jy ! Component: 2300 - total flux cleaned = -0.00875095 Jy ! Component: 2350 - total flux cleaned = -0.0089368 Jy ! Component: 2400 - total flux cleaned = -0.00915176 Jy ! Component: 2450 - total flux cleaned = -0.00936493 Jy ! Component: 2500 - total flux cleaned = -0.00954605 Jy ! Component: 2550 - total flux cleaned = -0.00969604 Jy ! Component: 2600 - total flux cleaned = -0.00987425 Jy ! Component: 2650 - total flux cleaned = -0.0100511 Jy ! Component: 2700 - total flux cleaned = -0.0102562 Jy ! Component: 2750 - total flux cleaned = -0.0104013 Jy ! Component: 2800 - total flux cleaned = -0.0105454 Jy ! Component: 2850 - total flux cleaned = -0.0107172 Jy ! Component: 2900 - total flux cleaned = -0.0109727 Jy ! Component: 2950 - total flux cleaned = -0.0110854 Jy ! Component: 3000 - total flux cleaned = -0.0112534 Jy ! Component: 3050 - total flux cleaned = -0.0114755 Jy ! Component: 3100 - total flux cleaned = -0.0115581 Jy ! Component: 3150 - total flux cleaned = -0.01175 Jy ! Component: 3200 - total flux cleaned = -0.011886 Jy ! Component: 3250 - total flux cleaned = -0.0119944 Jy ! Component: 3300 - total flux cleaned = -0.0121827 Jy ! Component: 3350 - total flux cleaned = -0.0122898 Jy ! Component: 3400 - total flux cleaned = -0.0124759 Jy ! Component: 3450 - total flux cleaned = -0.0125554 Jy ! Component: 3500 - total flux cleaned = -0.0127134 Jy ! Component: 3550 - total flux cleaned = -0.0128702 Jy ! Component: 3600 - total flux cleaned = -0.0129222 Jy ! Component: 3650 - total flux cleaned = -0.0130776 Jy ! Component: 3700 - total flux cleaned = -0.0131031 Jy ! Component: 3750 - total flux cleaned = -0.0132822 Jy ! Component: 3800 - total flux cleaned = -0.013384 Jy ! Component: 3850 - total flux cleaned = -0.0134091 Jy ! Component: 3900 - total flux cleaned = -0.0135606 Jy ! Component: 3950 - total flux cleaned = -0.013661 Jy ! Component: 4000 - total flux cleaned = -0.013811 Jy ! Component: 4050 - total flux cleaned = -0.0139352 Jy ! Total flux subtracted in 4096 components = -0.0140093 Jy ! Clean residual min=-0.001679 max=0.001337 Jy/beam ! Clean residual mean=-0.000014 rms=0.000470 Jy/beam ! Combined flux in latest and established models = 0.724679 Jy keep ! Adding 267 model components to the UV plane model. ! The established model now contains 464 components and 0.724678 Jy ![Exited script file: muppet] wmap "J2313-4729_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.629 x 7.49 at -4.48 degrees (North through East) ! Clean map min=-0.0032963 max=0.31963 Jy/beam ! Writing clean map to FITS file: J2313-4729_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.319632 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000468998 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.440191 0.440191 0.880382 1.76076 3.52153 7.04306 14.0861 28.1722 56.3445 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.319 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.629 x 7.49 at -4.48 degrees (North through East) ! Clean map min=-0.0032963 max=0.31963 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2313-4729_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 19:38:23 2017