! Started logfile: J2312+1615_S_2014_08_05_pus_uvs.log on Sun Nov 13 17:40:41 2016 obs J2312+1615_S_2014_08_05_pus_uva.fits ! Reading UV FITS file: J2312+1615_S_2014_08_05_pus_uva.fits ! AN table 1: 123 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.687986 visibilities/baseline/integration-bin. ! Found source: J2312+1615 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 360 lines of history. ! ! Reading 15232 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2312+1615_S_2014_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 205 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 205 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 205 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 205 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.931568Jy sigma=0.010432 ! Fit after self-cal, rms=0.915191Jy sigma=0.010265 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.028 mas, bmaj=8.073 mas, bpa=27 degrees ! Estimated noise=805.235 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.066486 Jy ! Component: 100 - total flux cleaned = 0.0809871 Jy ! Total flux subtracted in 100 components = 0.0809871 Jy ! Clean residual min=-0.003168 max=0.004058 Jy/beam ! Clean residual mean=-0.000018 rms=0.000884 Jy/beam ! Combined flux in latest and established models = 0.0809871 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.0809871 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076676Jy sigma=0.000777 ! Fit after self-cal, rms=0.076671Jy sigma=0.000777 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.081 mas, bmaj=8.934 mas, bpa=22.99 degrees ! Estimated noise=520.963 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00443478 Jy ! Component: 100 - total flux cleaned = 0.00650225 Jy ! Component: 150 - total flux cleaned = 0.00779691 Jy ! Component: 200 - total flux cleaned = 0.00865028 Jy ! Total flux subtracted in 200 components = 0.00865028 Jy ! Clean residual min=-0.002008 max=0.001910 Jy/beam ! Clean residual mean=0.000004 rms=0.000522 Jy/beam ! Combined flux in latest and established models = 0.0896374 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 49 components and 0.0896374 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076284Jy sigma=0.000775 ! Fit after self-cal, rms=0.076285Jy sigma=0.000775 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.89 HN 1.00 KP 1.07 ! LA 1.18 MK 1.00* NL 0.95 OV 1.00 ! PT 1.01 SC 0.93 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.02 HN 1.00 KP 1.01 ! LA 1.07 MK 1.00* NL 1.01 OV 1.02 ! PT 1.06 SC 1.08 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.13 HN 1.06 KP 0.88 ! LA 0.85 MK 1.00* NL 1.01 OV 0.97 ! PT 1.01 SC 1.04 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.88 HN 1.04 KP 0.86 ! LA 0.81 MK 1.00* NL 1.05 OV 0.99 ! PT 1.04 SC 0.99 ! ! ! Fit before self-cal, rms=0.076285Jy sigma=0.000775 ! Fit after self-cal, rms=0.073185Jy sigma=0.000768 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.094 mas, bmaj=8.959 mas, bpa=22.99 degrees ! Estimated noise=520.888 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000104621 Jy ! Component: 100 - total flux cleaned = -0.000115489 Jy ! Component: 150 - total flux cleaned = -0.000153526 Jy ! Component: 200 - total flux cleaned = -0.000170538 Jy ! Total flux subtracted in 200 components = -0.000170538 Jy ! Clean residual min=-0.001569 max=0.001623 Jy/beam ! Clean residual mean=0.000004 rms=0.000424 Jy/beam ! Combined flux in latest and established models = 0.0894668 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 59 components and 0.0894668 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073182Jy sigma=0.000768 ! Fit after self-cal, rms=0.073158Jy sigma=0.000768 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073158Jy sigma=0.000768 ! Fit after self-cal, rms=0.072480Jy sigma=0.000766 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.095 mas, bmaj=8.984 mas, bpa=23.05 degrees ! Estimated noise=520.933 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000426983 Jy ! Component: 100 - total flux cleaned = -0.000417723 Jy ! Component: 150 - total flux cleaned = -0.000408124 Jy ! Component: 200 - total flux cleaned = -0.000399515 Jy ! Total flux subtracted in 200 components = -0.000399515 Jy ! Clean residual min=-0.001338 max=0.001487 Jy/beam ! Clean residual mean=0.000003 rms=0.000348 Jy/beam ! Combined flux in latest and established models = 0.0890673 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 74 components and 0.0890673 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072476Jy sigma=0.000766 ! Fit after self-cal, rms=0.072480Jy sigma=0.000766 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.00368e-05 Jy ! Component: 100 - total flux cleaned = -5.05376e-05 Jy ! Component: 150 - total flux cleaned = -4.47989e-05 Jy ! Component: 200 - total flux cleaned = -4.48571e-05 Jy ! Total flux subtracted in 200 components = -4.48571e-05 Jy ! Clean residual min=-0.001306 max=0.001481 Jy/beam ! Clean residual mean=0.000003 rms=0.000348 Jy/beam ! Combined flux in latest and established models = 0.0890224 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 83 components and 0.0890224 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072479Jy sigma=0.000766 ! Fit after self-cal, rms=0.072478Jy sigma=0.000766 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072478Jy sigma=0.000766 ! Fit after self-cal, rms=0.072633Jy sigma=0.000766 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.097 mas, bmaj=9 mas, bpa=23.06 degrees ! Estimated noise=521.363 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000171926 Jy ! Component: 100 - total flux cleaned = -0.000188951 Jy ! Component: 150 - total flux cleaned = -0.000188864 Jy ! Component: 200 - total flux cleaned = -0.000188715 Jy ! Total flux subtracted in 200 components = -0.000188715 Jy ! Clean residual min=-0.001286 max=0.001503 Jy/beam ! Clean residual mean=0.000003 rms=0.000343 Jy/beam ! Combined flux in latest and established models = 0.0888337 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 87 components and 0.0888337 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072632Jy sigma=0.000766 ! Fit after self-cal, rms=0.072635Jy sigma=0.000766 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-116, -102). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000848699 Jy ! Component: 100 - total flux cleaned = 0.00114236 Jy ! Component: 150 - total flux cleaned = 0.00121589 Jy ! Component: 200 - total flux cleaned = 0.00119686 Jy ! Total flux subtracted in 200 components = 0.00119686 Jy ! Clean residual min=-0.001269 max=0.001402 Jy/beam ! Clean residual mean=0.000003 rms=0.000320 Jy/beam ! Combined flux in latest and established models = 0.0900306 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 105 components and 0.0900306 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072604Jy sigma=0.000766 ! Fit after self-cal, rms=0.072600Jy sigma=0.000766 ! Inverting map ! Added new window around map position (122.5, -63). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000701654 Jy ! Component: 100 - total flux cleaned = 0.000734224 Jy ! Component: 150 - total flux cleaned = 0.000775839 Jy ! Component: 200 - total flux cleaned = 0.000794499 Jy ! Total flux subtracted in 200 components = 0.000794499 Jy ! Clean residual min=-0.001281 max=0.001130 Jy/beam ! Clean residual mean=0.000004 rms=0.000308 Jy/beam ! Combined flux in latest and established models = 0.0908251 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 120 components and 0.0908251 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072576Jy sigma=0.000766 ! Fit after self-cal, rms=0.072571Jy sigma=0.000766 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072571Jy sigma=0.000766 ! Fit after self-cal, rms=0.072614Jy sigma=0.000765 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.392 mas, bmaj=10.76 mas, bpa=10.23 degrees ! Estimated noise=577.179 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.79826e-05 Jy ! Component: 100 - total flux cleaned = -8.14932e-05 Jy ! Component: 150 - total flux cleaned = -4.59226e-05 Jy ! Component: 200 - total flux cleaned = -4.60927e-05 Jy ! Total flux subtracted in 200 components = -4.60927e-05 Jy ! Clean residual min=-0.001296 max=0.001183 Jy/beam ! Clean residual mean=0.000005 rms=0.000340 Jy/beam ! Combined flux in latest and established models = 0.090779 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 143 components and 0.090779 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072609Jy sigma=0.000765 ! Fit after self-cal, rms=0.072611Jy sigma=0.000765 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.38938e-05 Jy ! Component: 100 - total flux cleaned = -6.31587e-05 Jy ! Component: 150 - total flux cleaned = -6.30276e-05 Jy ! Component: 200 - total flux cleaned = -4.6719e-05 Jy ! Total flux subtracted in 200 components = -4.6719e-05 Jy ! Clean residual min=-0.001306 max=0.001188 Jy/beam ! Clean residual mean=0.000006 rms=0.000339 Jy/beam ! Combined flux in latest and established models = 0.0907323 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 155 components and 0.0907323 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072609Jy sigma=0.000765 ! Fit after self-cal, rms=0.072609Jy sigma=0.000765 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=5.101 mas, bmaj=9.014 mas, bpa=23.09 degrees ! Estimated noise=521.289 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.101 x 9.014 at 23.09 degrees (North through East) ! Clean map min=-0.0013112 max=0.085476 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.038 mas, bmaj=8.17 mas, bpa=27.01 degrees ! Estimated noise=806.172 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0665601 Jy ! Component: 100 - total flux cleaned = 0.0810746 Jy ! Component: 150 - total flux cleaned = 0.0847419 Jy ! Component: 200 - total flux cleaned = 0.0868308 Jy ! Total flux subtracted in 200 components = 0.0868308 Jy ! Clean residual min=-0.002526 max=0.002301 Jy/beam ! Clean residual mean=-0.000008 rms=0.000679 Jy/beam ! Combined flux in latest and established models = 0.0868308 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0868308 Jy ! Inverting map and beam ! Estimated beam: bmin=5.101 mas, bmaj=9.014 mas, bpa=23.09 degrees ! Estimated noise=521.289 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00235321 Jy ! Component: 100 - total flux cleaned = 0.0030724 Jy ! Component: 150 - total flux cleaned = 0.00351573 Jy ! Component: 200 - total flux cleaned = 0.00377781 Jy ! Total flux subtracted in 200 components = 0.00377781 Jy ! Clean residual min=-0.001261 max=0.001199 Jy/beam ! Clean residual mean=-0.000000 rms=0.000325 Jy/beam ! Combined flux in latest and established models = 0.0906086 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 42 components and 0.0906086 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.392 mas, bmaj=10.76 mas, bpa=10.23 degrees ! Estimated noise=577.179 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.18922e-05 Jy ! Component: 100 - total flux cleaned = -0.000112222 Jy ! Component: 150 - total flux cleaned = -0.000111592 Jy ! Component: 200 - total flux cleaned = -7.49031e-05 Jy ! Total flux subtracted in 200 components = -7.49031e-05 Jy ! Clean residual min=-0.001255 max=0.001187 Jy/beam ! Clean residual mean=0.000004 rms=0.000349 Jy/beam ! Combined flux in latest and established models = 0.0905337 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.56688e-05 Jy ! Component: 100 - total flux cleaned = 1.46552e-05 Jy ! Component: 150 - total flux cleaned = 1.4751e-05 Jy ! Component: 200 - total flux cleaned = 2.6416e-05 Jy ! Total flux subtracted in 200 components = 2.6416e-05 Jy ! Clean residual min=-0.001304 max=0.001148 Jy/beam ! Clean residual mean=0.000005 rms=0.000344 Jy/beam ! Combined flux in latest and established models = 0.0905601 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 82 components and 0.0905601 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=5.101 mas, bmaj=9.014 mas, bpa=23.09 degrees ! Estimated noise=521.289 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00011166 Jy ! Component: 100 - total flux cleaned = -0.000191977 Jy ! Component: 150 - total flux cleaned = -0.000227491 Jy ! Component: 200 - total flux cleaned = -0.000226503 Jy ! Total flux subtracted in 200 components = -0.000226503 Jy ! Clean residual min=-0.001350 max=0.001132 Jy/beam ! Clean residual mean=0.000002 rms=0.000301 Jy/beam ! Combined flux in latest and established models = 0.0903336 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 104 components and 0.0903336 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072611Jy sigma=0.000765 ! Fit after self-cal, rms=0.072610Jy sigma=0.000765 wmodel J2312+1615_S_2014_08_05_pus_map.mod ! Writing 104 model components to file: J2312+1615_S_2014_08_05_pus_map.mod wobs J2312+1615_S_2014_08_05_pus_uvs.fits ! Writing UV FITS file: J2312+1615_S_2014_08_05_pus_uvs.fits wwins J2312+1615_S_2014_08_05_pus_map.win ! wwins: Wrote 3 windows to J2312+1615_S_2014_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000344425 Jy ! Component: 100 - total flux cleaned = -0.000595921 Jy ! Component: 150 - total flux cleaned = -0.000796403 Jy ! Component: 200 - total flux cleaned = -0.000918617 Jy ! Component: 250 - total flux cleaned = -0.000969081 Jy ! Component: 300 - total flux cleaned = -0.00101743 Jy ! Component: 350 - total flux cleaned = -0.00101735 Jy ! Component: 400 - total flux cleaned = -0.00100191 Jy ! Component: 450 - total flux cleaned = -0.000957221 Jy ! Component: 500 - total flux cleaned = -0.000928625 Jy ! Component: 550 - total flux cleaned = -0.000928515 Jy ! Component: 600 - total flux cleaned = -0.000900909 Jy ! Component: 650 - total flux cleaned = -0.000915016 Jy ! Component: 700 - total flux cleaned = -0.000942151 Jy ! Component: 750 - total flux cleaned = -0.000955363 Jy ! Component: 800 - total flux cleaned = -0.000968106 Jy ! Component: 850 - total flux cleaned = -0.000980688 Jy ! Component: 900 - total flux cleaned = -0.000980799 Jy ! Component: 950 - total flux cleaned = -0.000932242 Jy ! Component: 1000 - total flux cleaned = -0.000920464 Jy ! Component: 1050 - total flux cleaned = -0.000908651 Jy ! Component: 1100 - total flux cleaned = -0.000897019 Jy ! Component: 1150 - total flux cleaned = -0.000919803 Jy ! Component: 1200 - total flux cleaned = -0.000897113 Jy ! Component: 1250 - total flux cleaned = -0.000885977 Jy ! Component: 1300 - total flux cleaned = -0.000875105 Jy ! Component: 1350 - total flux cleaned = -0.00088618 Jy ! Component: 1400 - total flux cleaned = -0.000917921 Jy ! Component: 1450 - total flux cleaned = -0.000896618 Jy ! Component: 1500 - total flux cleaned = -0.000917276 Jy ! Component: 1550 - total flux cleaned = -0.000907017 Jy ! Component: 1600 - total flux cleaned = -0.000866655 Jy ! Component: 1650 - total flux cleaned = -0.000806975 Jy ! Component: 1700 - total flux cleaned = -0.000826778 Jy ! Component: 1750 - total flux cleaned = -0.000817033 Jy ! Component: 1800 - total flux cleaned = -0.000778832 Jy ! Component: 1850 - total flux cleaned = -0.000769569 Jy ! Component: 1900 - total flux cleaned = -0.000751028 Jy ! Component: 1950 - total flux cleaned = -0.000778685 Jy ! Component: 2000 - total flux cleaned = -0.000751344 Jy ! Component: 2050 - total flux cleaned = -0.000751476 Jy ! Component: 2100 - total flux cleaned = -0.000742554 Jy ! Component: 2150 - total flux cleaned = -0.000751411 Jy ! Component: 2200 - total flux cleaned = -0.000733741 Jy ! Component: 2250 - total flux cleaned = -0.000733673 Jy ! Component: 2300 - total flux cleaned = -0.000742372 Jy ! Component: 2350 - total flux cleaned = -0.000759329 Jy ! Component: 2400 - total flux cleaned = -0.000759413 Jy ! Component: 2450 - total flux cleaned = -0.000767698 Jy ! Component: 2500 - total flux cleaned = -0.000792368 Jy ! Component: 2550 - total flux cleaned = -0.000759778 Jy ! Component: 2600 - total flux cleaned = -0.000816236 Jy ! Component: 2650 - total flux cleaned = -0.000808221 Jy ! Component: 2700 - total flux cleaned = -0.000816147 Jy ! Component: 2750 - total flux cleaned = -0.000847431 Jy ! Component: 2800 - total flux cleaned = -0.000855152 Jy ! Component: 2850 - total flux cleaned = -0.00085517 Jy ! Component: 2900 - total flux cleaned = -0.000893242 Jy ! Component: 2950 - total flux cleaned = -0.000900811 Jy ! Component: 3000 - total flux cleaned = -0.000923225 Jy ! Component: 3050 - total flux cleaned = -0.000938022 Jy ! Component: 3100 - total flux cleaned = -0.000967432 Jy ! Component: 3150 - total flux cleaned = -0.000996534 Jy ! Component: 3200 - total flux cleaned = -0.001011 Jy ! Component: 3250 - total flux cleaned = -0.00104686 Jy ! Component: 3300 - total flux cleaned = -0.00108236 Jy ! Component: 3350 - total flux cleaned = -0.00109649 Jy ! Component: 3400 - total flux cleaned = -0.0011175 Jy ! Component: 3450 - total flux cleaned = -0.00111749 Jy ! Component: 3500 - total flux cleaned = -0.0011656 Jy ! Component: 3550 - total flux cleaned = -0.0011928 Jy ! Component: 3600 - total flux cleaned = -0.00120633 Jy ! Component: 3650 - total flux cleaned = -0.00121984 Jy ! Component: 3700 - total flux cleaned = -0.0012533 Jy ! Component: 3750 - total flux cleaned = -0.00126657 Jy ! Component: 3800 - total flux cleaned = -0.00129942 Jy ! Component: 3850 - total flux cleaned = -0.0013255 Jy ! Component: 3900 - total flux cleaned = -0.00135793 Jy ! Component: 3950 - total flux cleaned = -0.00137075 Jy ! Component: 4000 - total flux cleaned = -0.00139638 Jy ! Component: 4050 - total flux cleaned = -0.001428 Jy ! Total flux subtracted in 4096 components = -0.00142176 Jy ! Clean residual min=-0.000386 max=0.000405 Jy/beam ! Clean residual mean=-0.000001 rms=0.000118 Jy/beam ! Combined flux in latest and established models = 0.0889119 Jy keep ! Adding 289 model components to the UV plane model. ! The established model now contains 393 components and 0.0889118 Jy ![Exited script file: muppet] wmap "J2312+1615_S_2014_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.101 x 9.014 at 23.09 degrees (North through East) ! Clean map min=-0.0012667 max=0.085538 Jy/beam ! Writing clean map to FITS file: J2312+1615_S_2014_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0855381 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000117069 device "J2312+1615_S_2014_08_05_pus\_map.eps/VPS" ! Attempting to open device: 'J2312+1615_S_2014_08_05_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.410586 0.410586 0.821173 1.64235 3.28469 6.56938 13.1388 26.2775 52.5551 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.085 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.101 x 9.014 at 23.09 degrees (North through East) ! Clean map min=-0.0012667 max=0.085538 Jy/beam quit ! Quitting program ! Log file J2312+1615_S_2014_08_05_pus_uvs.log closed on Sun Nov 13 17:40:46 2016