! Started logfile: J2311-1306_S_2014_05_31_pus_uvs.log on Mon Nov 28 15:41:19 2016 obs J2311-1306_S_2014_05_31_pus_uva.fits ! Reading UV FITS file: J2311-1306_S_2014_05_31_pus_uva.fits ! AN table 1: 122 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.987067 visibilities/baseline/integration-bin. ! Found source: J2311-1306 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 21676 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2311-1306_S_2014_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.884628Jy sigma=0.009690 ! Fit after self-cal, rms=0.849510Jy sigma=0.009279 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.51 mas, bmaj=6.674 mas, bpa=-4.827 degrees ! Estimated noise=705.328 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.109261 Jy ! Component: 100 - total flux cleaned = 0.141815 Jy ! Total flux subtracted in 100 components = 0.141815 Jy ! Clean residual min=-0.009259 max=0.022058 Jy/beam ! Clean residual mean=0.000006 rms=0.002291 Jy/beam ! Combined flux in latest and established models = 0.141815 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.141815 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091080Jy sigma=0.000952 ! Fit after self-cal, rms=0.091041Jy sigma=0.000951 ! Inverting map ! Added new window around map position (-4, 20.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0210521 Jy ! Component: 100 - total flux cleaned = 0.0342742 Jy ! Total flux subtracted in 100 components = 0.0342742 Jy ! Clean residual min=-0.005644 max=0.009654 Jy/beam ! Clean residual mean=0.000004 rms=0.001530 Jy/beam ! Combined flux in latest and established models = 0.176089 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 25 components and 0.176089 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084149Jy sigma=0.000867 ! Fit after self-cal, rms=0.083754Jy sigma=0.000863 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0106641 Jy ! Component: 100 - total flux cleaned = 0.0180205 Jy ! Total flux subtracted in 100 components = 0.0180205 Jy ! Clean residual min=-0.004731 max=0.009118 Jy/beam ! Clean residual mean=0.000003 rms=0.001193 Jy/beam ! Combined flux in latest and established models = 0.19411 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 40 components and 0.19411 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081515Jy sigma=0.000836 ! Fit after self-cal, rms=0.081427Jy sigma=0.000835 ! Inverting map ! Added new window around map position (-4, 1.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00872927 Jy ! Component: 100 - total flux cleaned = 0.0141581 Jy ! Total flux subtracted in 100 components = 0.0141581 Jy ! Clean residual min=-0.003727 max=0.004952 Jy/beam ! Clean residual mean=0.000002 rms=0.000944 Jy/beam ! Combined flux in latest and established models = 0.208268 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 59 components and 0.208268 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080101Jy sigma=0.000819 ! Fit after self-cal, rms=0.080007Jy sigma=0.000818 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.066 mas, bmaj=7.827 mas, bpa=-3.885 degrees ! Estimated noise=446.068 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00773284 Jy ! Component: 100 - total flux cleaned = 0.0128003 Jy ! Component: 150 - total flux cleaned = 0.0164641 Jy ! Component: 200 - total flux cleaned = 0.0191778 Jy ! Total flux subtracted in 200 components = 0.0191778 Jy ! Clean residual min=-0.003398 max=0.004788 Jy/beam ! Clean residual mean=-0.000003 rms=0.000824 Jy/beam ! Combined flux in latest and established models = 0.227445 Jy ! Performing phase self-cal ! Adding 57 model components to the UV plane model. ! The established model now contains 96 components and 0.227446 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079038Jy sigma=0.000809 ! Fit after self-cal, rms=0.079007Jy sigma=0.000808 ! Inverting map ! Added new window around map position (-11, 53). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00407936 Jy ! Component: 100 - total flux cleaned = 0.00654286 Jy ! Component: 150 - total flux cleaned = 0.00844876 Jy ! Component: 200 - total flux cleaned = 0.00998497 Jy ! Total flux subtracted in 200 components = 0.00998497 Jy ! Clean residual min=-0.002646 max=0.002892 Jy/beam ! Clean residual mean=-0.000002 rms=0.000666 Jy/beam ! Combined flux in latest and established models = 0.23743 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 126 components and 0.237431 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078742Jy sigma=0.000806 ! Fit after self-cal, rms=0.078726Jy sigma=0.000805 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.81 HN 0.98 KP 1.03 ! LA 1.16 MK 0.96 NL 0.95 OV 0.98 ! PT 0.99 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00 HN 1.04 KP 1.00 ! LA 1.12 MK 1.02 NL 1.02 OV 1.02 ! PT 0.98 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.13 HN 1.04 KP 0.91 ! LA 0.89 MK 1.02 NL 1.01 OV 0.94 ! PT 0.96 SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.02 HN 1.03 KP 0.89 ! LA 0.88 MK 1.02 NL 1.07 OV 1.02 ! PT 1.04 SC 1.02 ! ! ! Fit before self-cal, rms=0.078726Jy sigma=0.000805 ! Fit after self-cal, rms=0.076102Jy sigma=0.000785 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.079 mas, bmaj=7.859 mas, bpa=-3.83 degrees ! Estimated noise=445.345 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6, 31). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00286257 Jy ! Component: 100 - total flux cleaned = 0.00389598 Jy ! Component: 150 - total flux cleaned = 0.00440594 Jy ! Component: 200 - total flux cleaned = 0.00479806 Jy ! Total flux subtracted in 200 components = 0.00479806 Jy ! Clean residual min=-0.001580 max=0.001539 Jy/beam ! Clean residual mean=-0.000001 rms=0.000377 Jy/beam ! Combined flux in latest and established models = 0.242229 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 148 components and 0.242229 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076000Jy sigma=0.000784 ! Fit after self-cal, rms=0.075998Jy sigma=0.000783 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075998Jy sigma=0.000783 ! Fit after self-cal, rms=0.075929Jy sigma=0.000782 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.077 mas, bmaj=7.863 mas, bpa=-3.853 degrees ! Estimated noise=444.893 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000771737 Jy ! Component: 100 - total flux cleaned = 0.00106975 Jy ! Component: 150 - total flux cleaned = 0.00122471 Jy ! Component: 200 - total flux cleaned = 0.00129378 Jy ! Total flux subtracted in 200 components = 0.00129378 Jy ! Clean residual min=-0.001458 max=0.001384 Jy/beam ! Clean residual mean=0.000001 rms=0.000320 Jy/beam ! Combined flux in latest and established models = 0.243522 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 174 components and 0.243522 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075917Jy sigma=0.000782 ! Fit after self-cal, rms=0.075918Jy sigma=0.000782 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00018145 Jy ! Component: 100 - total flux cleaned = 0.000244383 Jy ! Component: 150 - total flux cleaned = 0.000288486 Jy ! Component: 200 - total flux cleaned = 0.000316194 Jy ! Total flux subtracted in 200 components = 0.000316194 Jy ! Clean residual min=-0.001462 max=0.001407 Jy/beam ! Clean residual mean=0.000001 rms=0.000316 Jy/beam ! Combined flux in latest and established models = 0.243839 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 185 components and 0.243839 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075913Jy sigma=0.000782 ! Fit after self-cal, rms=0.075912Jy sigma=0.000782 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075912Jy sigma=0.000782 ! Fit after self-cal, rms=0.075926Jy sigma=0.000782 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.078 mas, bmaj=7.866 mas, bpa=-3.85 degrees ! Estimated noise=444.876 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000182543 Jy ! Component: 100 - total flux cleaned = 0.000224075 Jy ! Component: 150 - total flux cleaned = 0.000249564 Jy ! Component: 200 - total flux cleaned = 0.000262008 Jy ! Total flux subtracted in 200 components = 0.000262008 Jy ! Clean residual min=-0.001463 max=0.001396 Jy/beam ! Clean residual mean=0.000001 rms=0.000313 Jy/beam ! Combined flux in latest and established models = 0.244101 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 198 components and 0.2441 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075922Jy sigma=0.000782 ! Fit after self-cal, rms=0.075922Jy sigma=0.000782 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.99261e-05 Jy ! Component: 100 - total flux cleaned = 0.000134675 Jy ! Component: 150 - total flux cleaned = 0.00015668 Jy ! Component: 200 - total flux cleaned = 0.000178169 Jy ! Total flux subtracted in 200 components = 0.000178169 Jy ! Clean residual min=-0.001464 max=0.001401 Jy/beam ! Clean residual mean=0.000001 rms=0.000311 Jy/beam ! Combined flux in latest and established models = 0.244279 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 204 components and 0.244279 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075919Jy sigma=0.000782 ! Fit after self-cal, rms=0.075919Jy sigma=0.000782 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075919Jy sigma=0.000782 ! Fit after self-cal, rms=0.075923Jy sigma=0.000782 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.553 mas, bmaj=14.78 mas, bpa=1.491 degrees ! Estimated noise=558.447 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000358362 Jy ! Component: 100 - total flux cleaned = 0.000476317 Jy ! Component: 150 - total flux cleaned = 0.000518423 Jy ! Component: 200 - total flux cleaned = 0.000549802 Jy ! Total flux subtracted in 200 components = 0.000549802 Jy ! Clean residual min=-0.001485 max=0.001657 Jy/beam ! Clean residual mean=0.000001 rms=0.000404 Jy/beam ! Combined flux in latest and established models = 0.244828 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 214 components and 0.244828 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075922Jy sigma=0.000782 ! Fit after self-cal, rms=0.075923Jy sigma=0.000782 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.5529e-05 Jy ! Component: 100 - total flux cleaned = 0.000131457 Jy ! Component: 150 - total flux cleaned = 0.000158594 Jy ! Component: 200 - total flux cleaned = 0.000171566 Jy ! Total flux subtracted in 200 components = 0.000171566 Jy ! Clean residual min=-0.001458 max=0.001650 Jy/beam ! Clean residual mean=0.000001 rms=0.000402 Jy/beam ! Combined flux in latest and established models = 0.245 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 221 components and 0.245 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075922Jy sigma=0.000782 ! Fit after self-cal, rms=0.075922Jy sigma=0.000782 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.078 mas, bmaj=7.867 mas, bpa=-3.855 degrees ! Estimated noise=444.845 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.078 x 7.867 at -3.855 degrees (North through East) ! Clean map min=-0.001391 max=0.14551 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.512 mas, bmaj=6.687 mas, bpa=-4.785 degrees ! Estimated noise=707.673 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.108765 Jy ! Component: 100 - total flux cleaned = 0.145323 Jy ! Component: 150 - total flux cleaned = 0.167209 Jy ! Component: 200 - total flux cleaned = 0.182376 Jy ! Total flux subtracted in 200 components = 0.182376 Jy ! Clean residual min=-0.004738 max=0.008564 Jy/beam ! Clean residual mean=0.000003 rms=0.001295 Jy/beam ! Combined flux in latest and established models = 0.182376 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 0.182376 Jy ! Inverting map and beam ! Estimated beam: bmin=3.078 mas, bmaj=7.867 mas, bpa=-3.855 degrees ! Estimated noise=444.845 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0163785 Jy ! Component: 100 - total flux cleaned = 0.0266518 Jy ! Component: 150 - total flux cleaned = 0.0337101 Jy ! Component: 200 - total flux cleaned = 0.0389867 Jy ! Total flux subtracted in 200 components = 0.0389867 Jy ! Clean residual min=-0.002392 max=0.003070 Jy/beam ! Clean residual mean=-0.000001 rms=0.000709 Jy/beam ! Combined flux in latest and established models = 0.221363 Jy ! Adding 58 model components to the UV plane model. ! The established model now contains 78 components and 0.221363 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00408461 Jy ! Component: 100 - total flux cleaned = 0.00729238 Jy ! Component: 150 - total flux cleaned = 0.00985635 Jy ! Component: 200 - total flux cleaned = 0.0119539 Jy ! Total flux subtracted in 200 components = 0.0119539 Jy ! Clean residual min=-0.001591 max=0.001595 Jy/beam ! Clean residual mean=-0.000000 rms=0.000434 Jy/beam ! Combined flux in latest and established models = 0.233317 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 117 components and 0.233317 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.553 mas, bmaj=14.78 mas, bpa=1.491 degrees ! Estimated noise=558.447 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00256948 Jy ! Component: 100 - total flux cleaned = 0.00439832 Jy ! Component: 150 - total flux cleaned = 0.00581807 Jy ! Component: 200 - total flux cleaned = 0.00694252 Jy ! Total flux subtracted in 200 components = 0.00694252 Jy ! Clean residual min=-0.001636 max=0.001484 Jy/beam ! Clean residual mean=0.000001 rms=0.000464 Jy/beam ! Combined flux in latest and established models = 0.240259 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000902539 Jy ! Component: 100 - total flux cleaned = 0.00163651 Jy ! Component: 150 - total flux cleaned = 0.00223649 Jy ! Component: 200 - total flux cleaned = 0.00272799 Jy ! Total flux subtracted in 200 components = 0.00272799 Jy ! Clean residual min=-0.001552 max=0.001602 Jy/beam ! Clean residual mean=0.000001 rms=0.000416 Jy/beam ! Combined flux in latest and established models = 0.242987 Jy ! Adding 70 model components to the UV plane model. ! The established model now contains 174 components and 0.242988 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.078 mas, bmaj=7.867 mas, bpa=-3.855 degrees ! Estimated noise=444.845 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000771232 Jy ! Component: 100 - total flux cleaned = 0.000923605 Jy ! Component: 150 - total flux cleaned = 0.000988889 Jy ! Component: 200 - total flux cleaned = 0.00102832 Jy ! Total flux subtracted in 200 components = 0.00102832 Jy ! Clean residual min=-0.001484 max=0.001392 Jy/beam ! Clean residual mean=0.000001 rms=0.000316 Jy/beam ! Combined flux in latest and established models = 0.244016 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 194 components and 0.244016 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075942Jy sigma=0.000782 ! Fit after self-cal, rms=0.075936Jy sigma=0.000782 wmodel J2311-1306_S_2014_05_31_pus_map.mod ! Writing 194 model components to file: J2311-1306_S_2014_05_31_pus_map.mod wobs J2311-1306_S_2014_05_31_pus_uvs.fits ! Writing UV FITS file: J2311-1306_S_2014_05_31_pus_uvs.fits wwins J2311-1306_S_2014_05_31_pus_map.win ! wwins: Wrote 5 windows to J2311-1306_S_2014_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000269076 Jy ! Component: 100 - total flux cleaned = -0.000293103 Jy ! Component: 150 - total flux cleaned = -0.000443691 Jy ! Component: 200 - total flux cleaned = -0.000526262 Jy ! Component: 250 - total flux cleaned = -0.000683823 Jy ! Component: 300 - total flux cleaned = -0.000759516 Jy ! Component: 350 - total flux cleaned = -0.000832963 Jy ! Component: 400 - total flux cleaned = -0.000886873 Jy ! Component: 450 - total flux cleaned = -0.000974571 Jy ! Component: 500 - total flux cleaned = -0.000991676 Jy ! Component: 550 - total flux cleaned = -0.00104201 Jy ! Component: 600 - total flux cleaned = -0.00105825 Jy ! Component: 650 - total flux cleaned = -0.00105851 Jy ! Component: 700 - total flux cleaned = -0.00110616 Jy ! Component: 750 - total flux cleaned = -0.00110593 Jy ! Component: 800 - total flux cleaned = -0.00109044 Jy ! Component: 850 - total flux cleaned = -0.00112067 Jy ! Component: 900 - total flux cleaned = -0.00112049 Jy ! Component: 950 - total flux cleaned = -0.00109098 Jy ! Component: 1000 - total flux cleaned = -0.00107655 Jy ! Component: 1050 - total flux cleaned = -0.00109081 Jy ! Component: 1100 - total flux cleaned = -0.00110478 Jy ! Component: 1150 - total flux cleaned = -0.00109076 Jy ! Component: 1200 - total flux cleaned = -0.00110452 Jy ! Component: 1250 - total flux cleaned = -0.00114514 Jy ! Component: 1300 - total flux cleaned = -0.00114526 Jy ! Component: 1350 - total flux cleaned = -0.00119826 Jy ! Component: 1400 - total flux cleaned = -0.00119816 Jy ! Component: 1450 - total flux cleaned = -0.00119807 Jy ! Component: 1500 - total flux cleaned = -0.0011853 Jy ! Component: 1550 - total flux cleaned = -0.00122329 Jy ! Component: 1600 - total flux cleaned = -0.00117308 Jy ! Component: 1650 - total flux cleaned = -0.0011482 Jy ! Component: 1700 - total flux cleaned = -0.00113605 Jy ! Component: 1750 - total flux cleaned = -0.00118467 Jy ! Component: 1800 - total flux cleaned = -0.00118462 Jy ! Component: 1850 - total flux cleaned = -0.00118453 Jy ! Component: 1900 - total flux cleaned = -0.00121993 Jy ! Component: 1950 - total flux cleaned = -0.00116117 Jy ! Component: 2000 - total flux cleaned = -0.0011845 Jy ! Component: 2050 - total flux cleaned = -0.0012306 Jy ! Component: 2100 - total flux cleaned = -0.00126495 Jy ! Component: 2150 - total flux cleaned = -0.00127621 Jy ! Component: 2200 - total flux cleaned = -0.00126501 Jy ! Component: 2250 - total flux cleaned = -0.00129835 Jy ! Component: 2300 - total flux cleaned = -0.00128733 Jy ! Component: 2350 - total flux cleaned = -0.00129837 Jy ! Component: 2400 - total flux cleaned = -0.00127661 Jy ! Component: 2450 - total flux cleaned = -0.00127671 Jy ! Component: 2500 - total flux cleaned = -0.0012983 Jy ! Component: 2550 - total flux cleaned = -0.00125569 Jy ! Component: 2600 - total flux cleaned = -0.00125576 Jy ! Component: 2650 - total flux cleaned = -0.00123474 Jy ! Component: 2700 - total flux cleaned = -0.00125579 Jy ! Component: 2750 - total flux cleaned = -0.00125584 Jy ! Component: 2800 - total flux cleaned = -0.00121458 Jy ! Component: 2850 - total flux cleaned = -0.00119412 Jy ! Component: 2900 - total flux cleaned = -0.00117378 Jy ! Component: 2950 - total flux cleaned = -0.00110327 Jy ! Component: 3000 - total flux cleaned = -0.00114338 Jy ! Component: 3050 - total flux cleaned = -0.00113352 Jy ! Component: 3100 - total flux cleaned = -0.00106427 Jy ! Component: 3150 - total flux cleaned = -0.00107408 Jy ! Component: 3200 - total flux cleaned = -0.00107396 Jy ! Component: 3250 - total flux cleaned = -0.00101571 Jy ! Component: 3300 - total flux cleaned = -0.000996401 Jy ! Component: 3350 - total flux cleaned = -0.00096756 Jy ! Component: 3400 - total flux cleaned = -0.000919823 Jy ! Component: 3450 - total flux cleaned = -0.000872299 Jy ! Component: 3500 - total flux cleaned = -0.00086299 Jy ! Component: 3550 - total flux cleaned = -0.00081609 Jy ! Component: 3600 - total flux cleaned = -0.000778654 Jy ! Component: 3650 - total flux cleaned = -0.000695243 Jy ! Component: 3700 - total flux cleaned = -0.000704341 Jy ! Component: 3750 - total flux cleaned = -0.000667665 Jy ! Component: 3800 - total flux cleaned = -0.000603669 Jy ! Component: 3850 - total flux cleaned = -0.00054931 Jy ! Component: 3900 - total flux cleaned = -0.000531219 Jy ! Component: 3950 - total flux cleaned = -0.000504319 Jy ! Component: 4000 - total flux cleaned = -0.000459611 Jy ! Component: 4050 - total flux cleaned = -0.000468566 Jy ! Total flux subtracted in 4096 components = -0.000397922 Jy ! Clean residual min=-0.000624 max=0.000461 Jy/beam ! Clean residual mean=0.000001 rms=0.000160 Jy/beam ! Combined flux in latest and established models = 0.243618 Jy keep ! Adding 286 model components to the UV plane model. ! The established model now contains 480 components and 0.243618 Jy ![Exited script file: muppet] wmap "J2311-1306_S_2014_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.078 x 7.867 at -3.855 degrees (North through East) ! Clean map min=-0.0011755 max=0.1457 Jy/beam ! Writing clean map to FITS file: J2311-1306_S_2014_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.145698 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000157617 device "J2311-1306_S_2014_05_31_pus\_map.eps/VPS" ! Attempting to open device: 'J2311-1306_S_2014_05_31_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.324542 0.324542 0.649083 1.29817 2.59633 5.19267 10.3853 20.7707 41.5413 83.0827 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.145 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.078 x 7.867 at -3.855 degrees (North through East) ! Clean map min=-0.0011755 max=0.1457 Jy/beam quit ! Quitting program ! Log file J2311-1306_S_2014_05_31_pus_uvs.log closed on Mon Nov 28 15:41:25 2016