! Started logfile: J2306-0459_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:37:47 2017 obs J2306-0459_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J2306-0459_S_2014_01_04_pus_uva.fits ! AN table 1: 60 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.5 visibilities/baseline/integration-bin. ! Found source: J2306-0459 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 4320 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2306-0459_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 150 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 150 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 150 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 150 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.791271Jy sigma=0.010425 ! Fit after self-cal, rms=0.750313Jy sigma=0.009859 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.984 mas, bmaj=6.732 mas, bpa=13.3 degrees ! Estimated noise=1132.75 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.187334 Jy ! Component: 100 - total flux cleaned = 0.240406 Jy ! Total flux subtracted in 100 components = 0.240406 Jy ! Clean residual min=-0.015093 max=0.023858 Jy/beam ! Clean residual mean=-0.000010 rms=0.004579 Jy/beam ! Combined flux in latest and established models = 0.240406 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.240406 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109059Jy sigma=0.001170 ! Fit after self-cal, rms=0.109072Jy sigma=0.001170 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.571 mas, bmaj=7.959 mas, bpa=14.41 degrees ! Estimated noise=885.408 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0333061 Jy ! Component: 100 - total flux cleaned = 0.0490005 Jy ! Component: 150 - total flux cleaned = 0.058823 Jy ! Component: 200 - total flux cleaned = 0.065316 Jy ! Total flux subtracted in 200 components = 0.065316 Jy ! Clean residual min=-0.010028 max=0.016130 Jy/beam ! Clean residual mean=-0.000018 rms=0.003204 Jy/beam ! Combined flux in latest and established models = 0.305722 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 43 components and 0.305722 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096517Jy sigma=0.001071 ! Fit after self-cal, rms=0.096473Jy sigma=0.001071 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.00* KP 1.00* LA 1.03 ! MK 1.03 NL 0.97 OV 0.96 PT 0.98 ! SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.29 FD 1.00* KP 1.00* LA 0.98 ! MK 0.98 NL 1.02 OV 1.01 PT 0.96 ! SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00* KP 1.00* LA 0.80 ! MK 1.11 NL 0.89 OV 0.93 PT 0.95 ! SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.00* KP 1.00* LA 0.85 ! MK 1.13 NL 1.07 OV 1.00 PT 0.95 ! SC 0.99 ! ! ! Fit before self-cal, rms=0.096473Jy sigma=0.001071 ! Fit after self-cal, rms=0.086689Jy sigma=0.000946 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.601 mas, bmaj=8.14 mas, bpa=14.47 degrees ! Estimated noise=893.766 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000846289 Jy ! Component: 100 - total flux cleaned = 0.000756607 Jy ! Component: 150 - total flux cleaned = 0.000609668 Jy ! Component: 200 - total flux cleaned = 0.000476297 Jy ! Total flux subtracted in 200 components = 0.000476297 Jy ! Clean residual min=-0.006671 max=0.007302 Jy/beam ! Clean residual mean=-0.000014 rms=0.001923 Jy/beam ! Combined flux in latest and established models = 0.306198 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 58 components and 0.306198 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086489Jy sigma=0.000945 ! Fit after self-cal, rms=0.086144Jy sigma=0.000944 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086144Jy sigma=0.000944 ! Fit after self-cal, rms=0.083629Jy sigma=0.000920 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.603 mas, bmaj=8.108 mas, bpa=14.33 degrees ! Estimated noise=893.664 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000265145 Jy ! Component: 100 - total flux cleaned = 0.000210556 Jy ! Component: 150 - total flux cleaned = 0.000211465 Jy ! Component: 200 - total flux cleaned = 0.000210582 Jy ! Total flux subtracted in 200 components = 0.000210582 Jy ! Clean residual min=-0.005091 max=0.005577 Jy/beam ! Clean residual mean=-0.000001 rms=0.001346 Jy/beam ! Combined flux in latest and established models = 0.306409 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 62 components and 0.306409 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083540Jy sigma=0.000920 ! Fit after self-cal, rms=0.083545Jy sigma=0.000920 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.2568e-05 Jy ! Component: 100 - total flux cleaned = -8.08201e-05 Jy ! Component: 150 - total flux cleaned = -0.000117399 Jy ! Component: 200 - total flux cleaned = -0.000151285 Jy ! Total flux subtracted in 200 components = -0.000151285 Jy ! Clean residual min=-0.005053 max=0.005573 Jy/beam ! Clean residual mean=-0.000001 rms=0.001337 Jy/beam ! Combined flux in latest and established models = 0.306258 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 64 components and 0.306258 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083500Jy sigma=0.000919 ! Fit after self-cal, rms=0.083508Jy sigma=0.000919 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083508Jy sigma=0.000919 ! Fit after self-cal, rms=0.083766Jy sigma=0.000919 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.604 mas, bmaj=8.117 mas, bpa=14.33 degrees ! Estimated noise=896.049 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000331455 Jy ! Component: 100 - total flux cleaned = 0.000293421 Jy ! Component: 150 - total flux cleaned = 0.000292481 Jy ! Component: 200 - total flux cleaned = 0.000292934 Jy ! Total flux subtracted in 200 components = 0.000292934 Jy ! Clean residual min=-0.005089 max=0.005497 Jy/beam ! Clean residual mean=-0.000001 rms=0.001335 Jy/beam ! Combined flux in latest and established models = 0.306551 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 64 components and 0.306551 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083724Jy sigma=0.000919 ! Fit after self-cal, rms=0.083720Jy sigma=0.000919 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.00779e-05 Jy ! Component: 100 - total flux cleaned = -8.52272e-05 Jy ! Component: 150 - total flux cleaned = -0.00011148 Jy ! Component: 200 - total flux cleaned = -0.000135523 Jy ! Total flux subtracted in 200 components = -0.000135523 Jy ! Clean residual min=-0.005059 max=0.005489 Jy/beam ! Clean residual mean=-0.000001 rms=0.001330 Jy/beam ! Combined flux in latest and established models = 0.306415 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 67 components and 0.306415 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083699Jy sigma=0.000919 ! Fit after self-cal, rms=0.083703Jy sigma=0.000919 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083703Jy sigma=0.000919 ! Fit after self-cal, rms=0.083856Jy sigma=0.000919 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.788 mas, bmaj=14.15 mas, bpa=16.99 degrees ! Estimated noise=998.453 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0015994 Jy ! Component: 100 - total flux cleaned = 0.00163833 Jy ! Component: 150 - total flux cleaned = 0.00170494 Jy ! Component: 200 - total flux cleaned = 0.00179149 Jy ! Total flux subtracted in 200 components = 0.00179149 Jy ! Clean residual min=-0.005547 max=0.007908 Jy/beam ! Clean residual mean=-0.000001 rms=0.001977 Jy/beam ! Combined flux in latest and established models = 0.308207 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 69 components and 0.308207 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083899Jy sigma=0.000919 ! Fit after self-cal, rms=0.083866Jy sigma=0.000919 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000731693 Jy ! Component: 100 - total flux cleaned = 0.000766016 Jy ! Component: 150 - total flux cleaned = 0.000738901 Jy ! Component: 200 - total flux cleaned = 0.000739272 Jy ! Total flux subtracted in 200 components = 0.000739272 Jy ! Clean residual min=-0.005414 max=0.007876 Jy/beam ! Clean residual mean=-0.000000 rms=0.001949 Jy/beam ! Combined flux in latest and established models = 0.308946 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 70 components and 0.308946 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083907Jy sigma=0.000919 ! Fit after self-cal, rms=0.083897Jy sigma=0.000919 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.603 mas, bmaj=8.122 mas, bpa=14.34 degrees ! Estimated noise=897.647 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.603 x 8.122 at 14.34 degrees (North through East) ! Clean map min=-0.004761 max=0.24928 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.998 mas, bmaj=6.926 mas, bpa=13.61 degrees ! Estimated noise=1155.54 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.190863 Jy ! Component: 100 - total flux cleaned = 0.242711 Jy ! Component: 150 - total flux cleaned = 0.268138 Jy ! Component: 200 - total flux cleaned = 0.281685 Jy ! Total flux subtracted in 200 components = 0.281685 Jy ! Clean residual min=-0.006193 max=0.006838 Jy/beam ! Clean residual mean=-0.000003 rms=0.001627 Jy/beam ! Combined flux in latest and established models = 0.281685 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.281685 Jy ! Inverting map and beam ! Estimated beam: bmin=3.603 mas, bmaj=8.122 mas, bpa=14.34 degrees ! Estimated noise=897.647 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0104286 Jy ! Component: 100 - total flux cleaned = 0.0158273 Jy ! Component: 150 - total flux cleaned = 0.0189185 Jy ! Component: 200 - total flux cleaned = 0.0208389 Jy ! Total flux subtracted in 200 components = 0.0208389 Jy ! Clean residual min=-0.005403 max=0.005784 Jy/beam ! Clean residual mean=-0.000003 rms=0.001405 Jy/beam ! Combined flux in latest and established models = 0.302524 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 51 components and 0.302524 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.788 mas, bmaj=14.15 mas, bpa=16.99 degrees ! Estimated noise=998.453 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00334164 Jy ! Component: 100 - total flux cleaned = 0.00429664 Jy ! Component: 150 - total flux cleaned = 0.00453062 Jy ! Component: 200 - total flux cleaned = 0.00468396 Jy ! Total flux subtracted in 200 components = 0.00468396 Jy ! Clean residual min=-0.005453 max=0.007866 Jy/beam ! Clean residual mean=-0.000002 rms=0.001997 Jy/beam ! Combined flux in latest and established models = 0.307207 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.9515e-05 Jy ! Component: 100 - total flux cleaned = 0.000217538 Jy ! Component: 150 - total flux cleaned = 0.000295644 Jy ! Component: 200 - total flux cleaned = 0.00037354 Jy ! Total flux subtracted in 200 components = 0.00037354 Jy ! Clean residual min=-0.005392 max=0.007791 Jy/beam ! Clean residual mean=-0.000001 rms=0.001975 Jy/beam ! Combined flux in latest and established models = 0.307581 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 58 components and 0.307581 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.603 mas, bmaj=8.122 mas, bpa=14.34 degrees ! Estimated noise=897.647 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00136447 Jy ! Component: 100 - total flux cleaned = -0.0014309 Jy ! Component: 150 - total flux cleaned = -0.00137777 Jy ! Component: 200 - total flux cleaned = -0.00133028 Jy ! Total flux subtracted in 200 components = -0.00133028 Jy ! Clean residual min=-0.005108 max=0.005697 Jy/beam ! Clean residual mean=-0.000002 rms=0.001342 Jy/beam ! Combined flux in latest and established models = 0.306251 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 63 components and 0.306251 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083872Jy sigma=0.000919 ! Fit after self-cal, rms=0.083896Jy sigma=0.000919 wmodel J2306-0459_S_2014_01_04_pus_map.mod ! Writing 63 model components to file: J2306-0459_S_2014_01_04_pus_map.mod wobs J2306-0459_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J2306-0459_S_2014_01_04_pus_uvs.fits wwins J2306-0459_S_2014_01_04_pus_map.win ! wwins: Wrote 1 windows to J2306-0459_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000829539 Jy ! Component: 100 - total flux cleaned = 0.00159995 Jy ! Component: 150 - total flux cleaned = 0.00229182 Jy ! Component: 200 - total flux cleaned = 0.00283977 Jy ! Component: 250 - total flux cleaned = 0.00314718 Jy ! Component: 300 - total flux cleaned = 0.00286128 Jy ! Component: 350 - total flux cleaned = 0.00253786 Jy ! Component: 400 - total flux cleaned = 0.00223363 Jy ! Component: 450 - total flux cleaned = 0.00180092 Jy ! Component: 500 - total flux cleaned = 0.00157338 Jy ! Component: 550 - total flux cleaned = 0.00126858 Jy ! Component: 600 - total flux cleaned = 0.000893916 Jy ! Component: 650 - total flux cleaned = 0.000652473 Jy ! Component: 700 - total flux cleaned = 0.00030391 Jy ! Component: 750 - total flux cleaned = 4.36708e-05 Jy ! Component: 800 - total flux cleaned = -0.000172084 Jy ! Component: 850 - total flux cleaned = -0.000276524 Jy ! Component: 900 - total flux cleaned = -0.000412884 Jy ! Component: 950 - total flux cleaned = -0.000676885 Jy ! Component: 1000 - total flux cleaned = -0.000740475 Jy ! Component: 1050 - total flux cleaned = -0.000865831 Jy ! Component: 1100 - total flux cleaned = -0.00107828 Jy ! Component: 1150 - total flux cleaned = -0.00119544 Jy ! Component: 1200 - total flux cleaned = -0.00119553 Jy ! Component: 1250 - total flux cleaned = -0.0012526 Jy ! Component: 1300 - total flux cleaned = -0.00133552 Jy ! Component: 1350 - total flux cleaned = -0.00144226 Jy ! Component: 1400 - total flux cleaned = -0.00146776 Jy ! Component: 1450 - total flux cleaned = -0.00159481 Jy ! Component: 1500 - total flux cleaned = -0.00164397 Jy ! Component: 1550 - total flux cleaned = -0.00164397 Jy ! Component: 1600 - total flux cleaned = -0.00171568 Jy ! Component: 1650 - total flux cleaned = -0.00178551 Jy ! Component: 1700 - total flux cleaned = -0.00187755 Jy ! Component: 1750 - total flux cleaned = -0.00194512 Jy ! Component: 1800 - total flux cleaned = -0.00201111 Jy ! Component: 1850 - total flux cleaned = -0.00209733 Jy ! Component: 1900 - total flux cleaned = -0.00211929 Jy ! Component: 1950 - total flux cleaned = -0.00220336 Jy ! Component: 2000 - total flux cleaned = -0.00238776 Jy ! Component: 2050 - total flux cleaned = -0.00246829 Jy ! Component: 2100 - total flux cleaned = -0.00258728 Jy ! Component: 2150 - total flux cleaned = -0.00266562 Jy ! Component: 2200 - total flux cleaned = -0.0028392 Jy ! Component: 2250 - total flux cleaned = -0.00297213 Jy ! Component: 2300 - total flux cleaned = -0.00312198 Jy ! Component: 2350 - total flux cleaned = -0.00323281 Jy ! Component: 2400 - total flux cleaned = -0.00336045 Jy ! Component: 2450 - total flux cleaned = -0.00348641 Jy ! Component: 2500 - total flux cleaned = -0.00364596 Jy ! Component: 2550 - total flux cleaned = -0.00376835 Jy ! Component: 2600 - total flux cleaned = -0.00387193 Jy ! Component: 2650 - total flux cleaned = -0.00400864 Jy ! Component: 2700 - total flux cleaned = -0.00422772 Jy ! Component: 2750 - total flux cleaned = -0.00436083 Jy ! Component: 2800 - total flux cleaned = -0.0044761 Jy ! Component: 2850 - total flux cleaned = -0.00460643 Jy ! Component: 2900 - total flux cleaned = -0.00471916 Jy ! Component: 2950 - total flux cleaned = -0.00486286 Jy ! Component: 3000 - total flux cleaned = -0.00487863 Jy ! Component: 3050 - total flux cleaned = -0.00495669 Jy ! Component: 3100 - total flux cleaned = -0.00494088 Jy ! Component: 3150 - total flux cleaned = -0.0050025 Jy ! Component: 3200 - total flux cleaned = -0.00506363 Jy ! Component: 3250 - total flux cleaned = -0.00507866 Jy ! Component: 3300 - total flux cleaned = -0.00513881 Jy ! Component: 3350 - total flux cleaned = -0.00513885 Jy ! Component: 3400 - total flux cleaned = -0.00516854 Jy ! Component: 3450 - total flux cleaned = -0.00518328 Jy ! Component: 3500 - total flux cleaned = -0.00518326 Jy ! Component: 3550 - total flux cleaned = -0.0052269 Jy ! Component: 3600 - total flux cleaned = -0.00521243 Jy ! Component: 3650 - total flux cleaned = -0.00521243 Jy ! Component: 3700 - total flux cleaned = -0.00521255 Jy ! Component: 3750 - total flux cleaned = -0.00525517 Jy ! Component: 3800 - total flux cleaned = -0.00526912 Jy ! Component: 3850 - total flux cleaned = -0.00528311 Jy ! Component: 3900 - total flux cleaned = -0.00529717 Jy ! Component: 3950 - total flux cleaned = -0.00532491 Jy ! Component: 4000 - total flux cleaned = -0.00532475 Jy ! Component: 4050 - total flux cleaned = -0.00533866 Jy ! Total flux subtracted in 4096 components = -0.00537985 Jy ! Clean residual min=-0.000828 max=0.000894 Jy/beam ! Clean residual mean=0.000002 rms=0.000236 Jy/beam ! Combined flux in latest and established models = 0.300871 Jy keep ! Adding 261 model components to the UV plane model. ! The established model now contains 324 components and 0.300871 Jy ![Exited script file: muppet] wmap "J2306-0459_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.603 x 8.122 at 14.34 degrees (North through East) ! Clean map min=-0.0024787 max=0.25198 Jy/beam ! Writing clean map to FITS file: J2306-0459_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.251979 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000228797 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.2724 0.2724 0.5448 1.0896 2.1792 4.3584 8.71681 17.4336 34.8672 69.7344 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.251 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.603 x 8.122 at 14.34 degrees (North through East) ! Clean map min=-0.0024787 max=0.25198 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2306-0459_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:37:51 2017