! Started logfile: J2305+8242_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:37:42 2017 obs J2305+8242_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J2305+8242_S_2014_01_04_pus_uva.fits ! AN table 1: 108 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.680556 visibilities/baseline/integration-bin. ! Found source: J2305+8242 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 10584 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2305+8242_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 162 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 162 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 162 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 162 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.947250Jy sigma=0.012619 ! Fit after self-cal, rms=0.932082Jy sigma=0.012445 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.435 mas, bmaj=10.23 mas, bpa=-30.27 degrees ! Estimated noise=990.888 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0551267 Jy ! Component: 100 - total flux cleaned = 0.0671822 Jy ! Total flux subtracted in 100 components = 0.0671822 Jy ! Clean residual min=-0.004349 max=0.004906 Jy/beam ! Clean residual mean=-0.000012 rms=0.001048 Jy/beam ! Combined flux in latest and established models = 0.0671822 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.0671822 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079259Jy sigma=0.000880 ! Fit after self-cal, rms=0.079255Jy sigma=0.000880 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.092 mas, bmaj=11.24 mas, bpa=-29.89 degrees ! Estimated noise=550.263 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00353168 Jy ! Component: 100 - total flux cleaned = 0.00531232 Jy ! Component: 150 - total flux cleaned = 0.00633594 Jy ! Component: 200 - total flux cleaned = 0.0066289 Jy ! Total flux subtracted in 200 components = 0.0066289 Jy ! Clean residual min=-0.002359 max=0.002215 Jy/beam ! Clean residual mean=-0.000016 rms=0.000587 Jy/beam ! Combined flux in latest and established models = 0.0738111 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 29 components and 0.0738111 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079082Jy sigma=0.000878 ! Fit after self-cal, rms=0.079118Jy sigma=0.000878 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.94 KP 1.00* LA 1.02 ! MK 0.99 NL 1.04 OV 1.05 PT 1.05 ! SC 0.88 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.12 KP 1.00* LA 1.05 ! MK 0.98 NL 1.00 OV 1.06 PT 0.98 ! SC 0.94 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.19 KP 1.00* LA 0.82 ! MK 1.10 NL 1.00 OV 0.95 PT 0.99 ! SC 0.92 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.06 KP 1.00* LA 0.91 ! MK 1.04 NL 1.11 OV 1.06 PT 1.01 ! SC 0.93 ! ! ! Fit before self-cal, rms=0.079118Jy sigma=0.000878 ! Fit after self-cal, rms=0.077142Jy sigma=0.000873 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.063 mas, bmaj=11.11 mas, bpa=-30.13 degrees ! Estimated noise=545.71 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000509871 Jy ! Component: 100 - total flux cleaned = 0.000718327 Jy ! Component: 150 - total flux cleaned = 0.000821836 Jy ! Component: 200 - total flux cleaned = 0.000825341 Jy ! Total flux subtracted in 200 components = 0.000825341 Jy ! Clean residual min=-0.001664 max=0.001932 Jy/beam ! Clean residual mean=-0.000011 rms=0.000481 Jy/beam ! Combined flux in latest and established models = 0.0746364 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 47 components and 0.0746365 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077086Jy sigma=0.000873 ! Fit after self-cal, rms=0.077218Jy sigma=0.000873 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077218Jy sigma=0.000873 ! Fit after self-cal, rms=0.078001Jy sigma=0.000872 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.052 mas, bmaj=11.12 mas, bpa=-30.03 degrees ! Estimated noise=548.496 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000200723 Jy ! Component: 100 - total flux cleaned = 0.000203137 Jy ! Component: 150 - total flux cleaned = 0.000203611 Jy ! Component: 200 - total flux cleaned = 0.000201938 Jy ! Total flux subtracted in 200 components = 0.000201938 Jy ! Clean residual min=-0.001730 max=0.001922 Jy/beam ! Clean residual mean=-0.000007 rms=0.000464 Jy/beam ! Combined flux in latest and established models = 0.0748384 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 55 components and 0.0748384 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077964Jy sigma=0.000872 ! Fit after self-cal, rms=0.078060Jy sigma=0.000872 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.73449e-05 Jy ! Component: 100 - total flux cleaned = -7.21278e-06 Jy ! Component: 150 - total flux cleaned = 1.32477e-05 Jy ! Component: 200 - total flux cleaned = 3.25414e-05 Jy ! Total flux subtracted in 200 components = 3.25414e-05 Jy ! Clean residual min=-0.001709 max=0.001908 Jy/beam ! Clean residual mean=-0.000007 rms=0.000462 Jy/beam ! Combined flux in latest and established models = 0.0748709 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 62 components and 0.0748709 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078044Jy sigma=0.000871 ! Fit after self-cal, rms=0.078062Jy sigma=0.000871 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078062Jy sigma=0.000871 ! Fit after self-cal, rms=0.078032Jy sigma=0.000871 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.037 mas, bmaj=11.09 mas, bpa=-30.08 degrees ! Estimated noise=549.67 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000125652 Jy ! Component: 100 - total flux cleaned = 0.000125446 Jy ! Component: 150 - total flux cleaned = 0.000125806 Jy ! Component: 200 - total flux cleaned = 0.00014529 Jy ! Total flux subtracted in 200 components = 0.00014529 Jy ! Clean residual min=-0.001724 max=0.001844 Jy/beam ! Clean residual mean=-0.000006 rms=0.000458 Jy/beam ! Combined flux in latest and established models = 0.0750162 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 70 components and 0.0750162 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078010Jy sigma=0.000871 ! Fit after self-cal, rms=0.078040Jy sigma=0.000871 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.11456e-05 Jy ! Component: 100 - total flux cleaned = 5.70558e-06 Jy ! Component: 150 - total flux cleaned = 5.48083e-06 Jy ! Component: 200 - total flux cleaned = 2.01757e-05 Jy ! Total flux subtracted in 200 components = 2.01757e-05 Jy ! Clean residual min=-0.001725 max=0.001837 Jy/beam ! Clean residual mean=-0.000006 rms=0.000457 Jy/beam ! Combined flux in latest and established models = 0.0750364 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 72 components and 0.0750364 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078030Jy sigma=0.000871 ! Fit after self-cal, rms=0.078044Jy sigma=0.000871 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078044Jy sigma=0.000871 ! Fit after self-cal, rms=0.077942Jy sigma=0.000871 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.051 mas, bmaj=13.56 mas, bpa=-23.61 degrees ! Estimated noise=661.601 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000359533 Jy ! Component: 100 - total flux cleaned = -0.000383506 Jy ! Component: 150 - total flux cleaned = -0.000397434 Jy ! Component: 200 - total flux cleaned = -0.000374556 Jy ! Total flux subtracted in 200 components = -0.000374556 Jy ! Clean residual min=-0.002077 max=0.001917 Jy/beam ! Clean residual mean=-0.000014 rms=0.000582 Jy/beam ! Combined flux in latest and established models = 0.0746619 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 88 components and 0.0746619 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077946Jy sigma=0.000871 ! Fit after self-cal, rms=0.077922Jy sigma=0.000871 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.46061e-05 Jy ! Component: 100 - total flux cleaned = 2.45274e-05 Jy ! Component: 150 - total flux cleaned = 3.2916e-05 Jy ! Component: 200 - total flux cleaned = 4.04774e-05 Jy ! Total flux subtracted in 200 components = 4.04774e-05 Jy ! Clean residual min=-0.002058 max=0.001881 Jy/beam ! Clean residual mean=-0.000013 rms=0.000578 Jy/beam ! Combined flux in latest and established models = 0.0747023 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 94 components and 0.0747023 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077925Jy sigma=0.000871 ! Fit after self-cal, rms=0.077917Jy sigma=0.000871 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.024 mas, bmaj=11.05 mas, bpa=-30.12 degrees ! Estimated noise=550.37 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.024 x 11.05 at -30.12 degrees (North through East) ! Clean map min=-0.0017341 max=0.071125 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.387 mas, bmaj=10.06 mas, bpa=-30.46 degrees ! Estimated noise=980.59 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0544174 Jy ! Component: 100 - total flux cleaned = 0.0664209 Jy ! Component: 150 - total flux cleaned = 0.0704927 Jy ! Component: 200 - total flux cleaned = 0.0724611 Jy ! Total flux subtracted in 200 components = 0.0724611 Jy ! Clean residual min=-0.003275 max=0.003520 Jy/beam ! Clean residual mean=-0.000004 rms=0.000834 Jy/beam ! Combined flux in latest and established models = 0.0724612 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.0724612 Jy ! Inverting map and beam ! Estimated beam: bmin=3.024 mas, bmaj=11.05 mas, bpa=-30.12 degrees ! Estimated noise=550.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00168369 Jy ! Component: 100 - total flux cleaned = 0.00242542 Jy ! Component: 150 - total flux cleaned = 0.00261638 Jy ! Component: 200 - total flux cleaned = 0.0026148 Jy ! Total flux subtracted in 200 components = 0.0026148 Jy ! Clean residual min=-0.001803 max=0.001869 Jy/beam ! Clean residual mean=-0.000005 rms=0.000473 Jy/beam ! Combined flux in latest and established models = 0.0750759 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 45 components and 0.075076 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.051 mas, bmaj=13.56 mas, bpa=-23.61 degrees ! Estimated noise=661.601 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000170211 Jy ! Component: 100 - total flux cleaned = -8.28686e-05 Jy ! Component: 150 - total flux cleaned = -5.3242e-05 Jy ! Component: 200 - total flux cleaned = -0.000117042 Jy ! Total flux subtracted in 200 components = -0.000117042 Jy ! Clean residual min=-0.002088 max=0.001859 Jy/beam ! Clean residual mean=-0.000011 rms=0.000581 Jy/beam ! Combined flux in latest and established models = 0.0749589 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.54801e-05 Jy ! Component: 100 - total flux cleaned = -7.32717e-05 Jy ! Component: 150 - total flux cleaned = -8.7104e-05 Jy ! Component: 200 - total flux cleaned = -0.00010016 Jy ! Total flux subtracted in 200 components = -0.00010016 Jy ! Clean residual min=-0.002082 max=0.001863 Jy/beam ! Clean residual mean=-0.000012 rms=0.000581 Jy/beam ! Combined flux in latest and established models = 0.0748588 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 68 components and 0.0748588 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.024 mas, bmaj=11.05 mas, bpa=-30.12 degrees ! Estimated noise=550.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.49711e-05 Jy ! Component: 100 - total flux cleaned = -0.000181826 Jy ! Component: 150 - total flux cleaned = -0.000152041 Jy ! Component: 200 - total flux cleaned = -0.000101597 Jy ! Total flux subtracted in 200 components = -0.000101597 Jy ! Clean residual min=-0.001772 max=0.001806 Jy/beam ! Clean residual mean=-0.000006 rms=0.000463 Jy/beam ! Combined flux in latest and established models = 0.0747572 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 75 components and 0.0747572 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077912Jy sigma=0.000871 ! Fit after self-cal, rms=0.077939Jy sigma=0.000871 wmodel J2305+8242_S_2014_01_04_pus_map.mod ! Writing 75 model components to file: J2305+8242_S_2014_01_04_pus_map.mod wobs J2305+8242_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J2305+8242_S_2014_01_04_pus_uvs.fits wwins J2305+8242_S_2014_01_04_pus_map.win ! wwins: Wrote 1 windows to J2305+8242_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000265419 Jy ! Component: 100 - total flux cleaned = 0.000655568 Jy ! Component: 150 - total flux cleaned = 0.00105277 Jy ! Component: 200 - total flux cleaned = 0.00129486 Jy ! Component: 250 - total flux cleaned = 0.00139846 Jy ! Component: 300 - total flux cleaned = 0.00152273 Jy ! Component: 350 - total flux cleaned = 0.00157052 Jy ! Component: 400 - total flux cleaned = 0.00166349 Jy ! Component: 450 - total flux cleaned = 0.00166236 Jy ! Component: 500 - total flux cleaned = 0.00153045 Jy ! Component: 550 - total flux cleaned = 0.00142382 Jy ! Component: 600 - total flux cleaned = 0.00127816 Jy ! Component: 650 - total flux cleaned = 0.00121743 Jy ! Component: 700 - total flux cleaned = 0.00117808 Jy ! Component: 750 - total flux cleaned = 0.00117856 Jy ! Component: 800 - total flux cleaned = 0.00114049 Jy ! Component: 850 - total flux cleaned = 0.00110386 Jy ! Component: 900 - total flux cleaned = 0.00103115 Jy ! Component: 950 - total flux cleaned = 0.00088773 Jy ! Component: 1000 - total flux cleaned = 0.000764314 Jy ! Component: 1050 - total flux cleaned = 0.000660736 Jy ! Component: 1100 - total flux cleaned = 0.000626702 Jy ! Component: 1150 - total flux cleaned = 0.000559805 Jy ! Component: 1200 - total flux cleaned = 0.000510366 Jy ! Component: 1250 - total flux cleaned = 0.000429193 Jy ! Component: 1300 - total flux cleaned = 0.00039723 Jy ! Component: 1350 - total flux cleaned = 0.000365569 Jy ! Component: 1400 - total flux cleaned = 0.000334485 Jy ! Component: 1450 - total flux cleaned = 0.000364968 Jy ! Component: 1500 - total flux cleaned = 0.000334509 Jy ! Component: 1550 - total flux cleaned = 0.000274744 Jy ! Component: 1600 - total flux cleaned = 0.000363138 Jy ! Component: 1650 - total flux cleaned = 0.000333904 Jy ! Component: 1700 - total flux cleaned = 0.000319742 Jy ! Component: 1750 - total flux cleaned = 0.000334142 Jy ! Component: 1800 - total flux cleaned = 0.000376438 Jy ! Component: 1850 - total flux cleaned = 0.000376335 Jy ! Component: 1900 - total flux cleaned = 0.000376418 Jy ! Component: 1950 - total flux cleaned = 0.000376359 Jy ! Component: 2000 - total flux cleaned = 0.000403328 Jy ! Component: 2050 - total flux cleaned = 0.000403355 Jy ! Component: 2100 - total flux cleaned = 0.000442858 Jy ! Component: 2150 - total flux cleaned = 0.000468721 Jy ! Component: 2200 - total flux cleaned = 0.000481766 Jy ! Component: 2250 - total flux cleaned = 0.000494648 Jy ! Component: 2300 - total flux cleaned = 0.000557999 Jy ! Component: 2350 - total flux cleaned = 0.000595499 Jy ! Component: 2400 - total flux cleaned = 0.000570622 Jy ! Component: 2450 - total flux cleaned = 0.000607806 Jy ! Component: 2500 - total flux cleaned = 0.000668858 Jy ! Component: 2550 - total flux cleaned = 0.000705093 Jy ! Component: 2600 - total flux cleaned = 0.000693253 Jy ! Component: 2650 - total flux cleaned = 0.000717147 Jy ! Component: 2700 - total flux cleaned = 0.000776222 Jy ! Component: 2750 - total flux cleaned = 0.000787975 Jy ! Component: 2800 - total flux cleaned = 0.000822705 Jy ! Component: 2850 - total flux cleaned = 0.00083414 Jy ! Component: 2900 - total flux cleaned = 0.00085705 Jy ! Component: 2950 - total flux cleaned = 0.000879722 Jy ! Component: 3000 - total flux cleaned = 0.000913505 Jy ! Component: 3050 - total flux cleaned = 0.000958141 Jy ! Component: 3100 - total flux cleaned = 0.000958063 Jy ! Component: 3150 - total flux cleaned = 0.0010021 Jy ! Component: 3200 - total flux cleaned = 0.000980233 Jy ! Component: 3250 - total flux cleaned = 0.00101281 Jy ! Component: 3300 - total flux cleaned = 0.00105587 Jy ! Component: 3350 - total flux cleaned = 0.00105583 Jy ! Component: 3400 - total flux cleaned = 0.00107705 Jy ! Component: 3450 - total flux cleaned = 0.00109808 Jy ! Component: 3500 - total flux cleaned = 0.00111892 Jy ! Component: 3550 - total flux cleaned = 0.00111893 Jy ! Component: 3600 - total flux cleaned = 0.00111894 Jy ! Component: 3650 - total flux cleaned = 0.00111901 Jy ! Component: 3700 - total flux cleaned = 0.00112922 Jy ! Component: 3750 - total flux cleaned = 0.00116986 Jy ! Component: 3800 - total flux cleaned = 0.00113953 Jy ! Component: 3850 - total flux cleaned = 0.00115963 Jy ! Component: 3900 - total flux cleaned = 0.00118955 Jy ! Component: 3950 - total flux cleaned = 0.0011796 Jy ! Component: 4000 - total flux cleaned = 0.00118948 Jy ! Component: 4050 - total flux cleaned = 0.0012091 Jy ! Total flux subtracted in 4096 components = 0.00122862 Jy ! Clean residual min=-0.000674 max=0.000645 Jy/beam ! Clean residual mean=-0.000003 rms=0.000176 Jy/beam ! Combined flux in latest and established models = 0.0759858 Jy keep ! Adding 267 model components to the UV plane model. ! The established model now contains 342 components and 0.0759858 Jy ![Exited script file: muppet] wmap "J2305+8242_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.024 x 11.05 at -30.12 degrees (North through East) ! Clean map min=-0.0011762 max=0.070893 Jy/beam ! Writing clean map to FITS file: J2305+8242_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0708933 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000174699 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.739274 0.739274 1.47855 2.9571 5.91419 11.8284 23.6568 47.3135 94.6271 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.07 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.024 x 11.05 at -30.12 degrees (North through East) ! Clean map min=-0.0011762 max=0.070893 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2305+8242_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:37:47 2017