! Started logfile: J2301-0158_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:37:37 2017 obs J2301-0158_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J2301-0158_S_2014_01_04_pus_uva.fits ! AN table 1: 59 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.498588 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2301-0158 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 4236 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2301-0158_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 148 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 148 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 148 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 148 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.660561Jy sigma=0.009027 ! Fit after self-cal, rms=0.613663Jy sigma=0.008312 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.064 mas, bmaj=6.762 mas, bpa=13.89 degrees ! Estimated noise=1103.7 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.297519 Jy ! Component: 100 - total flux cleaned = 0.36901 Jy ! Total flux subtracted in 100 components = 0.36901 Jy ! Clean residual min=-0.017535 max=0.025185 Jy/beam ! Clean residual mean=-0.000036 rms=0.004737 Jy/beam ! Combined flux in latest and established models = 0.36901 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.36901 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107058Jy sigma=0.001221 ! Fit after self-cal, rms=0.107126Jy sigma=0.001221 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.607 mas, bmaj=7.826 mas, bpa=14.02 degrees ! Estimated noise=863.496 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0322696 Jy ! Component: 100 - total flux cleaned = 0.0505985 Jy ! Component: 150 - total flux cleaned = 0.0629094 Jy ! Component: 200 - total flux cleaned = 0.0713497 Jy ! Total flux subtracted in 200 components = 0.0713497 Jy ! Clean residual min=-0.011939 max=0.018186 Jy/beam ! Clean residual mean=-0.000029 rms=0.003486 Jy/beam ! Combined flux in latest and established models = 0.44036 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 40 components and 0.44036 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093852Jy sigma=0.001103 ! Fit after self-cal, rms=0.093759Jy sigma=0.001102 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00* KP 1.00* LA 1.01 ! MK 0.99 NL 0.94 OV 0.96 PT 1.00 ! SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.00* KP 1.00* LA 0.99 ! MK 1.03 NL 1.03 OV 1.00 PT 0.95 ! SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00* KP 1.00* LA 0.82 ! MK 1.04 NL 1.00 OV 0.93 PT 0.94 ! SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 1.00* KP 1.00* LA 0.88 ! MK 1.09 NL 1.11 OV 0.99 PT 0.97 ! SC 0.96 ! ! ! Fit before self-cal, rms=0.093759Jy sigma=0.001102 ! Fit after self-cal, rms=0.082474Jy sigma=0.000932 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.636 mas, bmaj=7.974 mas, bpa=14 degrees ! Estimated noise=868.712 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00255713 Jy ! Component: 100 - total flux cleaned = -0.0032066 Jy ! Component: 150 - total flux cleaned = -0.00353371 Jy ! Component: 200 - total flux cleaned = -0.00382296 Jy ! Total flux subtracted in 200 components = -0.00382296 Jy ! Clean residual min=-0.004787 max=0.005405 Jy/beam ! Clean residual mean=-0.000001 rms=0.001163 Jy/beam ! Combined flux in latest and established models = 0.436537 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 52 components and 0.436537 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081942Jy sigma=0.000928 ! Fit after self-cal, rms=0.081589Jy sigma=0.000928 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081589Jy sigma=0.000928 ! Fit after self-cal, rms=0.081090Jy sigma=0.000921 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.636 mas, bmaj=7.968 mas, bpa=13.89 degrees ! Estimated noise=868.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00112959 Jy ! Component: 100 - total flux cleaned = -0.00138827 Jy ! Component: 150 - total flux cleaned = -0.00169479 Jy ! Component: 200 - total flux cleaned = -0.0018338 Jy ! Total flux subtracted in 200 components = -0.0018338 Jy ! Clean residual min=-0.004104 max=0.004809 Jy/beam ! Clean residual mean=-0.000001 rms=0.000963 Jy/beam ! Combined flux in latest and established models = 0.434703 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 56 components and 0.434703 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080840Jy sigma=0.000919 ! Fit after self-cal, rms=0.080825Jy sigma=0.000919 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6, 5.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00293388 Jy ! Component: 100 - total flux cleaned = 0.00239089 Jy ! Component: 150 - total flux cleaned = 0.00246213 Jy ! Component: 200 - total flux cleaned = 0.00252454 Jy ! Total flux subtracted in 200 components = 0.00252454 Jy ! Clean residual min=-0.003075 max=0.003349 Jy/beam ! Clean residual mean=0.000001 rms=0.000758 Jy/beam ! Combined flux in latest and established models = 0.437228 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 73 components and 0.437228 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080520Jy sigma=0.000916 ! Fit after self-cal, rms=0.080491Jy sigma=0.000916 ! Inverting map ! Added new window around map position (19.5, -102). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0019322 Jy ! Component: 100 - total flux cleaned = 0.00247429 Jy ! Component: 150 - total flux cleaned = 0.00329254 Jy ! Component: 200 - total flux cleaned = 0.00396057 Jy ! Total flux subtracted in 200 components = 0.00396057 Jy ! Clean residual min=-0.002686 max=0.002423 Jy/beam ! Clean residual mean=0.000000 rms=0.000626 Jy/beam ! Combined flux in latest and established models = 0.441188 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 85 components and 0.441188 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080299Jy sigma=0.000914 ! Fit after self-cal, rms=0.080291Jy sigma=0.000914 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080291Jy sigma=0.000914 ! Fit after self-cal, rms=0.080394Jy sigma=0.000914 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.64 mas, bmaj=7.976 mas, bpa=13.92 degrees ! Estimated noise=867.426 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000929563 Jy ! Component: 100 - total flux cleaned = 0.00120976 Jy ! Component: 150 - total flux cleaned = 0.00145974 Jy ! Component: 200 - total flux cleaned = 0.00183234 Jy ! Total flux subtracted in 200 components = 0.00183234 Jy ! Clean residual min=-0.002472 max=0.002138 Jy/beam ! Clean residual mean=-0.000002 rms=0.000545 Jy/beam ! Combined flux in latest and established models = 0.443021 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 93 components and 0.443021 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080310Jy sigma=0.000913 ! Fit after self-cal, rms=0.080311Jy sigma=0.000913 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000360228 Jy ! Component: 100 - total flux cleaned = 0.000688696 Jy ! Component: 150 - total flux cleaned = 0.000841621 Jy ! Component: 200 - total flux cleaned = 0.000986375 Jy ! Total flux subtracted in 200 components = 0.000986375 Jy ! Clean residual min=-0.002365 max=0.002024 Jy/beam ! Clean residual mean=-0.000002 rms=0.000512 Jy/beam ! Combined flux in latest and established models = 0.444007 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 101 components and 0.444007 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080265Jy sigma=0.000912 ! Fit after self-cal, rms=0.080260Jy sigma=0.000912 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080260Jy sigma=0.000912 ! Fit after self-cal, rms=0.080287Jy sigma=0.000912 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.712 mas, bmaj=13.55 mas, bpa=17.19 degrees ! Estimated noise=964.483 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000696481 Jy ! Component: 100 - total flux cleaned = 0.000926162 Jy ! Component: 150 - total flux cleaned = 0.000964939 Jy ! Component: 200 - total flux cleaned = 0.00101584 Jy ! Total flux subtracted in 200 components = 0.00101584 Jy ! Clean residual min=-0.001975 max=0.001996 Jy/beam ! Clean residual mean=-0.000005 rms=0.000510 Jy/beam ! Combined flux in latest and established models = 0.445023 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 123 components and 0.445023 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080281Jy sigma=0.000912 ! Fit after self-cal, rms=0.080281Jy sigma=0.000912 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000288741 Jy ! Component: 100 - total flux cleaned = 0.000385505 Jy ! Component: 150 - total flux cleaned = 0.000400494 Jy ! Component: 200 - total flux cleaned = 0.000400212 Jy ! Total flux subtracted in 200 components = 0.000400212 Jy ! Clean residual min=-0.001960 max=0.001871 Jy/beam ! Clean residual mean=-0.000005 rms=0.000491 Jy/beam ! Combined flux in latest and established models = 0.445423 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 140 components and 0.445423 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080278Jy sigma=0.000912 ! Fit after self-cal, rms=0.080276Jy sigma=0.000912 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.641 mas, bmaj=7.979 mas, bpa=13.93 degrees ! Estimated noise=867.324 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.641 x 7.979 at 13.93 degrees (North through East) ! Clean map min=-0.0028099 max=0.38467 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.085 mas, bmaj=6.881 mas, bpa=13.83 degrees ! Estimated noise=1115.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.300771 Jy ! Component: 100 - total flux cleaned = 0.371703 Jy ! Component: 150 - total flux cleaned = 0.395925 Jy ! Component: 200 - total flux cleaned = 0.40808 Jy ! Total flux subtracted in 200 components = 0.40808 Jy ! Clean residual min=-0.006201 max=0.007771 Jy/beam ! Clean residual mean=-0.000011 rms=0.001540 Jy/beam ! Combined flux in latest and established models = 0.40808 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.40808 Jy ! Inverting map and beam ! Estimated beam: bmin=3.641 mas, bmaj=7.979 mas, bpa=13.93 degrees ! Estimated noise=867.324 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00973136 Jy ! Component: 100 - total flux cleaned = 0.0160174 Jy ! Component: 150 - total flux cleaned = 0.0203768 Jy ! Component: 200 - total flux cleaned = 0.0228078 Jy ! Total flux subtracted in 200 components = 0.0228078 Jy ! Clean residual min=-0.003819 max=0.004305 Jy/beam ! Clean residual mean=-0.000006 rms=0.000918 Jy/beam ! Combined flux in latest and established models = 0.430888 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 48 components and 0.430888 Jy ! Inverting map ! Added new window around map position (2, -9.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00396107 Jy ! Component: 100 - total flux cleaned = 0.0060359 Jy ! Component: 150 - total flux cleaned = 0.00712802 Jy ! Component: 200 - total flux cleaned = 0.00768879 Jy ! Total flux subtracted in 200 components = 0.00768879 Jy ! Clean residual min=-0.002902 max=0.002128 Jy/beam ! Clean residual mean=-0.000003 rms=0.000642 Jy/beam ! Combined flux in latest and established models = 0.438577 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 75 components and 0.438577 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.712 mas, bmaj=13.55 mas, bpa=17.19 degrees ! Estimated noise=964.483 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00165608 Jy ! Component: 100 - total flux cleaned = 0.00257503 Jy ! Component: 150 - total flux cleaned = 0.00326282 Jy ! Component: 200 - total flux cleaned = 0.00372282 Jy ! Total flux subtracted in 200 components = 0.00372282 Jy ! Clean residual min=-0.002024 max=0.001830 Jy/beam ! Clean residual mean=-0.000005 rms=0.000559 Jy/beam ! Combined flux in latest and established models = 0.4423 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000505164 Jy ! Component: 100 - total flux cleaned = 0.000894104 Jy ! Component: 150 - total flux cleaned = 0.00124302 Jy ! Component: 200 - total flux cleaned = 0.00143903 Jy ! Total flux subtracted in 200 components = 0.00143903 Jy ! Clean residual min=-0.001934 max=0.001697 Jy/beam ! Clean residual mean=-0.000005 rms=0.000505 Jy/beam ! Combined flux in latest and established models = 0.443739 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 121 components and 0.443739 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.641 mas, bmaj=7.979 mas, bpa=13.93 degrees ! Estimated noise=867.324 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000195198 Jy ! Component: 100 - total flux cleaned = 0.000364416 Jy ! Component: 150 - total flux cleaned = 0.000515482 Jy ! Component: 200 - total flux cleaned = 0.000423171 Jy ! Total flux subtracted in 200 components = 0.000423171 Jy ! Clean residual min=-0.002148 max=0.001890 Jy/beam ! Clean residual mean=-0.000003 rms=0.000486 Jy/beam ! Combined flux in latest and established models = 0.444162 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 141 components and 0.444162 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080308Jy sigma=0.000912 ! Fit after self-cal, rms=0.080296Jy sigma=0.000912 wmodel J2301-0158_S_2014_01_04_pus_map.mod ! Writing 141 model components to file: J2301-0158_S_2014_01_04_pus_map.mod wobs J2301-0158_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J2301-0158_S_2014_01_04_pus_uvs.fits wwins J2301-0158_S_2014_01_04_pus_map.win ! wwins: Wrote 4 windows to J2301-0158_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000899751 Jy ! Component: 100 - total flux cleaned = -0.00137786 Jy ! Component: 150 - total flux cleaned = -0.00165823 Jy ! Component: 200 - total flux cleaned = -0.00171592 Jy ! Component: 250 - total flux cleaned = -0.0016344 Jy ! Component: 300 - total flux cleaned = -0.0016084 Jy ! Component: 350 - total flux cleaned = -0.0015832 Jy ! Component: 400 - total flux cleaned = -0.0015835 Jy ! Component: 450 - total flux cleaned = -0.00158339 Jy ! Component: 500 - total flux cleaned = -0.00160579 Jy ! Component: 550 - total flux cleaned = -0.00153783 Jy ! Component: 600 - total flux cleaned = -0.0016036 Jy ! Component: 650 - total flux cleaned = -0.00149642 Jy ! Component: 700 - total flux cleaned = -0.00151754 Jy ! Component: 750 - total flux cleaned = -0.0014765 Jy ! Component: 800 - total flux cleaned = -0.00147633 Jy ! Component: 850 - total flux cleaned = -0.00139754 Jy ! Component: 900 - total flux cleaned = -0.00132012 Jy ! Component: 950 - total flux cleaned = -0.00133913 Jy ! Component: 1000 - total flux cleaned = -0.00126395 Jy ! Component: 1050 - total flux cleaned = -0.00126417 Jy ! Component: 1100 - total flux cleaned = -0.00126413 Jy ! Component: 1150 - total flux cleaned = -0.0012459 Jy ! Component: 1200 - total flux cleaned = -0.00121053 Jy ! Component: 1250 - total flux cleaned = -0.00117596 Jy ! Component: 1300 - total flux cleaned = -0.0011419 Jy ! Component: 1350 - total flux cleaned = -0.00110834 Jy ! Component: 1400 - total flux cleaned = -0.00109175 Jy ! Component: 1450 - total flux cleaned = -0.00110792 Jy ! Component: 1500 - total flux cleaned = -0.00114027 Jy ! Component: 1550 - total flux cleaned = -0.00114014 Jy ! Component: 1600 - total flux cleaned = -0.00112439 Jy ! Component: 1650 - total flux cleaned = -0.00112466 Jy ! Component: 1700 - total flux cleaned = -0.00112467 Jy ! Component: 1750 - total flux cleaned = -0.00113979 Jy ! Component: 1800 - total flux cleaned = -0.00116979 Jy ! Component: 1850 - total flux cleaned = -0.00122889 Jy ! Component: 1900 - total flux cleaned = -0.00125793 Jy ! Component: 1950 - total flux cleaned = -0.00130108 Jy ! Component: 2000 - total flux cleaned = -0.00130132 Jy ! Component: 2050 - total flux cleaned = -0.00135773 Jy ! Component: 2100 - total flux cleaned = -0.00141318 Jy ! Component: 2150 - total flux cleaned = -0.00141332 Jy ! Component: 2200 - total flux cleaned = -0.00149486 Jy ! Component: 2250 - total flux cleaned = -0.00148126 Jy ! Component: 2300 - total flux cleaned = -0.00150794 Jy ! Component: 2350 - total flux cleaned = -0.00152127 Jy ! Component: 2400 - total flux cleaned = -0.00154732 Jy ! Component: 2450 - total flux cleaned = -0.00157307 Jy ! Component: 2500 - total flux cleaned = -0.00159839 Jy ! Component: 2550 - total flux cleaned = -0.00159821 Jy ! Component: 2600 - total flux cleaned = -0.00164799 Jy ! Component: 2650 - total flux cleaned = -0.00164794 Jy ! Component: 2700 - total flux cleaned = -0.00168458 Jy ! Component: 2750 - total flux cleaned = -0.00175699 Jy ! Component: 2800 - total flux cleaned = -0.00181677 Jy ! Component: 2850 - total flux cleaned = -0.00184055 Jy ! Component: 2900 - total flux cleaned = -0.0018992 Jy ! Component: 2950 - total flux cleaned = -0.00199232 Jy ! Component: 3000 - total flux cleaned = -0.00202691 Jy ! Component: 3050 - total flux cleaned = -0.00207269 Jy ! Component: 3100 - total flux cleaned = -0.00215229 Jy ! Component: 3150 - total flux cleaned = -0.00220855 Jy ! Component: 3200 - total flux cleaned = -0.00226451 Jy ! Component: 3250 - total flux cleaned = -0.00235313 Jy ! Component: 3300 - total flux cleaned = -0.00239692 Jy ! Component: 3350 - total flux cleaned = -0.00245151 Jy ! Component: 3400 - total flux cleaned = -0.00251649 Jy ! Component: 3450 - total flux cleaned = -0.00259171 Jy ! Component: 3500 - total flux cleaned = -0.00264502 Jy ! Component: 3550 - total flux cleaned = -0.00271904 Jy ! Component: 3600 - total flux cleaned = -0.00274 Jy ! Component: 3650 - total flux cleaned = -0.00280263 Jy ! Component: 3700 - total flux cleaned = -0.00287517 Jy ! Component: 3750 - total flux cleaned = -0.00296778 Jy ! Component: 3800 - total flux cleaned = -0.0030394 Jy ! Component: 3850 - total flux cleaned = -0.00310033 Jy ! Component: 3900 - total flux cleaned = -0.00320123 Jy ! Component: 3950 - total flux cleaned = -0.00331158 Jy ! Component: 4000 - total flux cleaned = -0.00337132 Jy ! Component: 4050 - total flux cleaned = -0.00344065 Jy ! Total flux subtracted in 4096 components = -0.00350959 Jy ! Clean residual min=-0.000587 max=0.000569 Jy/beam ! Clean residual mean=0.000001 rms=0.000173 Jy/beam ! Combined flux in latest and established models = 0.440653 Jy keep ! Adding 230 model components to the UV plane model. ! The established model now contains 371 components and 0.440653 Jy ![Exited script file: muppet] wmap "J2301-0158_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.641 x 7.979 at 13.93 degrees (North through East) ! Clean map min=-0.0018849 max=0.3885 Jy/beam ! Writing clean map to FITS file: J2301-0158_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.388497 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000175566 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.135573 0.135573 0.271147 0.542294 1.08459 2.16917 4.33835 8.6767 17.3534 34.7068 69.4136 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.388 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.641 x 7.979 at 13.93 degrees (North through East) ! Clean map min=-0.0018849 max=0.3885 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2301-0158_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:37:42 2017