! Started logfile: J2257+0743_S_2015_01_23_pus_uvs.log on Mon Jan 2 19:37:53 2017 obs J2257+0743_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J2257+0743_S_2015_01_23_pus_uva.fits ! AN table 1: 15 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.882963 visibilities/baseline/integration-bin. ! Found source: J2257+0743 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 2384 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2257+0743_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.748677Jy sigma=0.006788 ! Fit after self-cal, rms=0.736179Jy sigma=0.006715 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.482 mas, bmaj=6.892 mas, bpa=-9.293 degrees ! Estimated noise=1830.8 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.347239 Jy ! Component: 100 - total flux cleaned = 0.44411 Jy ! Total flux subtracted in 100 components = 0.44411 Jy ! Clean residual min=-0.030970 max=0.053210 Jy/beam ! Clean residual mean=0.000112 rms=0.010228 Jy/beam ! Combined flux in latest and established models = 0.44411 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.44411 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.557830Jy sigma=0.001712 ! Fit after self-cal, rms=0.557890Jy sigma=0.001711 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.948 mas, bmaj=7.45 mas, bpa=-7.375 degrees ! Estimated noise=1397.54 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0478364 Jy ! Component: 100 - total flux cleaned = 0.069768 Jy ! Component: 150 - total flux cleaned = 0.0826921 Jy ! Component: 200 - total flux cleaned = 0.0869763 Jy ! Total flux subtracted in 200 components = 0.0869763 Jy ! Clean residual min=-0.024185 max=0.054119 Jy/beam ! Clean residual mean=0.000144 rms=0.011053 Jy/beam ! Combined flux in latest and established models = 0.531086 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 27 components and 0.531086 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.548343Jy sigma=0.001573 ! Fit after self-cal, rms=0.548388Jy sigma=0.001572 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.00* HN 1.00 KP 1.03 ! LA 0.99 MK 0.99 NL 1.13 OV 0.92 ! PT 0.97 SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00* HN 0.99 KP 0.96 ! LA 0.96 MK 0.97 NL 1.61 OV 0.96 ! PT 0.97 SC 1.07 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 1.00* HN 0.99 KP 0.82 ! LA 0.77 MK 1.00 NL 2.56 OV 0.88 ! PT 0.94 SC 1.09 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.36 HN 0.93 KP 0.77 ! LA 0.82 MK 0.97 NL 1.46 OV 0.94 ! PT 0.96 SC 1.03 ! ! ! Fit before self-cal, rms=0.548388Jy sigma=0.001572 ! Fit after self-cal, rms=0.186489Jy sigma=0.000748 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.972 mas, bmaj=7.525 mas, bpa=-7.302 degrees ! Estimated noise=1388.73 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (10, -26). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00475063 Jy ! Component: 100 - total flux cleaned = 0.00442312 Jy ! Component: 150 - total flux cleaned = 0.00429834 Jy ! Component: 200 - total flux cleaned = 0.00374398 Jy ! Total flux subtracted in 200 components = 0.00374398 Jy ! Clean residual min=-0.005132 max=0.005402 Jy/beam ! Clean residual mean=0.000001 rms=0.001263 Jy/beam ! Combined flux in latest and established models = 0.53483 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 44 components and 0.534831 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.186117Jy sigma=0.000735 ! Fit after self-cal, rms=0.186361Jy sigma=0.000733 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.186361Jy sigma=0.000733 ! Fit after self-cal, rms=0.185501Jy sigma=0.000733 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.975 mas, bmaj=7.528 mas, bpa=-7.285 degrees ! Estimated noise=1385.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00137701 Jy ! Component: 100 - total flux cleaned = -0.00175942 Jy ! Component: 150 - total flux cleaned = -0.0021862 Jy ! Component: 200 - total flux cleaned = -0.00257252 Jy ! Total flux subtracted in 200 components = -0.00257252 Jy ! Clean residual min=-0.004349 max=0.004726 Jy/beam ! Clean residual mean=-0.000002 rms=0.001143 Jy/beam ! Combined flux in latest and established models = 0.532258 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 54 components and 0.532258 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.185452Jy sigma=0.000730 ! Fit after self-cal, rms=0.185447Jy sigma=0.000730 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.5, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00395672 Jy ! Component: 100 - total flux cleaned = 0.00363044 Jy ! Component: 150 - total flux cleaned = 0.00325116 Jy ! Component: 200 - total flux cleaned = 0.00273891 Jy ! Total flux subtracted in 200 components = 0.00273891 Jy ! Clean residual min=-0.003905 max=0.003736 Jy/beam ! Clean residual mean=-0.000007 rms=0.000987 Jy/beam ! Combined flux in latest and established models = 0.534997 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 71 components and 0.534997 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.185303Jy sigma=0.000726 ! Fit after self-cal, rms=0.185313Jy sigma=0.000726 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.185313Jy sigma=0.000726 ! Fit after self-cal, rms=0.186176Jy sigma=0.000725 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.972 mas, bmaj=7.525 mas, bpa=-7.279 degrees ! Estimated noise=1385.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000307364 Jy ! Component: 100 - total flux cleaned = -0.000264493 Jy ! Component: 150 - total flux cleaned = -0.000588173 Jy ! Component: 200 - total flux cleaned = -0.00082664 Jy ! Total flux subtracted in 200 components = -0.00082664 Jy ! Clean residual min=-0.003718 max=0.003468 Jy/beam ! Clean residual mean=-0.000008 rms=0.000925 Jy/beam ! Combined flux in latest and established models = 0.53417 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 86 components and 0.53417 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.186129Jy sigma=0.000724 ! Fit after self-cal, rms=0.186134Jy sigma=0.000724 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000251282 Jy ! Component: 100 - total flux cleaned = -0.000416916 Jy ! Component: 150 - total flux cleaned = -0.000622007 Jy ! Component: 200 - total flux cleaned = -0.000719911 Jy ! Total flux subtracted in 200 components = -0.000719911 Jy ! Clean residual min=-0.003631 max=0.003336 Jy/beam ! Clean residual mean=-0.000007 rms=0.000897 Jy/beam ! Combined flux in latest and established models = 0.53345 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 97 components and 0.53345 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.186095Jy sigma=0.000723 ! Fit after self-cal, rms=0.186102Jy sigma=0.000723 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.186102Jy sigma=0.000723 ! Fit after self-cal, rms=0.186360Jy sigma=0.000723 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.276 mas, bmaj=11.43 mas, bpa=-0.7236 degrees ! Estimated noise=1795.27 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00102652 Jy ! Component: 100 - total flux cleaned = -0.00113758 Jy ! Component: 150 - total flux cleaned = -0.00123333 Jy ! Component: 200 - total flux cleaned = -0.00132016 Jy ! Total flux subtracted in 200 components = -0.00132016 Jy ! Clean residual min=-0.004535 max=0.003169 Jy/beam ! Clean residual mean=-0.000014 rms=0.001039 Jy/beam ! Combined flux in latest and established models = 0.53213 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 113 components and 0.53213 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.186377Jy sigma=0.000723 ! Fit after self-cal, rms=0.186389Jy sigma=0.000723 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.84748e-05 Jy ! Component: 100 - total flux cleaned = 1.87205e-05 Jy ! Component: 150 - total flux cleaned = 5.35916e-05 Jy ! Component: 200 - total flux cleaned = 8.60801e-05 Jy ! Total flux subtracted in 200 components = 8.60801e-05 Jy ! Clean residual min=-0.004387 max=0.002998 Jy/beam ! Clean residual mean=-0.000014 rms=0.001002 Jy/beam ! Combined flux in latest and established models = 0.532216 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 121 components and 0.532216 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.186391Jy sigma=0.000723 ! Fit after self-cal, rms=0.186398Jy sigma=0.000723 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.973 mas, bmaj=7.526 mas, bpa=-7.27 degrees ! Estimated noise=1386.63 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.973 x 7.526 at -7.27 degrees (North through East) ! Clean map min=-0.0034501 max=0.44875 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.504 mas, bmaj=6.963 mas, bpa=-9.252 degrees ! Estimated noise=1790.46 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.339306 Jy ! Component: 100 - total flux cleaned = 0.434208 Jy ! Component: 150 - total flux cleaned = 0.476488 Jy ! Component: 200 - total flux cleaned = 0.497894 Jy ! Total flux subtracted in 200 components = 0.497894 Jy ! Clean residual min=-0.007549 max=0.011071 Jy/beam ! Clean residual mean=0.000023 rms=0.002323 Jy/beam ! Combined flux in latest and established models = 0.497894 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.497894 Jy ! Inverting map and beam ! Estimated beam: bmin=2.973 mas, bmaj=7.526 mas, bpa=-7.27 degrees ! Estimated noise=1386.63 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0156399 Jy ! Component: 100 - total flux cleaned = 0.0243642 Jy ! Component: 150 - total flux cleaned = 0.0299411 Jy ! Component: 200 - total flux cleaned = 0.0320748 Jy ! Total flux subtracted in 200 components = 0.0320748 Jy ! Clean residual min=-0.004609 max=0.004173 Jy/beam ! Clean residual mean=-0.000000 rms=0.001164 Jy/beam ! Combined flux in latest and established models = 0.529969 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 34 components and 0.529969 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.276 mas, bmaj=11.43 mas, bpa=-0.7236 degrees ! Estimated noise=1795.27 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00233966 Jy ! Component: 100 - total flux cleaned = 0.00261085 Jy ! Component: 150 - total flux cleaned = 0.00261607 Jy ! Component: 200 - total flux cleaned = 0.00253544 Jy ! Total flux subtracted in 200 components = 0.00253544 Jy ! Clean residual min=-0.004588 max=0.003733 Jy/beam ! Clean residual mean=-0.000012 rms=0.001177 Jy/beam ! Combined flux in latest and established models = 0.532504 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.92626e-06 Jy ! Component: 100 - total flux cleaned = 7.39448e-05 Jy ! Component: 150 - total flux cleaned = 7.44749e-05 Jy ! Component: 200 - total flux cleaned = 0.000131034 Jy ! Total flux subtracted in 200 components = 0.000131034 Jy ! Clean residual min=-0.004347 max=0.003356 Jy/beam ! Clean residual mean=-0.000013 rms=0.001069 Jy/beam ! Combined flux in latest and established models = 0.532635 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 67 components and 0.532635 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.973 mas, bmaj=7.526 mas, bpa=-7.27 degrees ! Estimated noise=1386.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000965433 Jy ! Component: 100 - total flux cleaned = -0.00105722 Jy ! Component: 150 - total flux cleaned = -0.00105596 Jy ! Component: 200 - total flux cleaned = -0.000995206 Jy ! Total flux subtracted in 200 components = -0.000995206 Jy ! Clean residual min=-0.004190 max=0.003481 Jy/beam ! Clean residual mean=-0.000004 rms=0.000915 Jy/beam ! Combined flux in latest and established models = 0.53164 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 88 components and 0.53164 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.186329Jy sigma=0.000724 ! Fit after self-cal, rms=0.186333Jy sigma=0.000724 wmodel J2257+0743_S_2015_01_23_pus_map.mod ! Writing 88 model components to file: J2257+0743_S_2015_01_23_pus_map.mod wobs J2257+0743_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J2257+0743_S_2015_01_23_pus_uvs.fits wwins J2257+0743_S_2015_01_23_pus_map.win ! wwins: Wrote 3 windows to J2257+0743_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00176777 Jy ! Component: 100 - total flux cleaned = -0.00237697 Jy ! Component: 150 - total flux cleaned = -0.00265506 Jy ! Component: 200 - total flux cleaned = -0.00317891 Jy ! Component: 250 - total flux cleaned = -0.00358137 Jy ! Component: 300 - total flux cleaned = -0.0040653 Jy ! Component: 350 - total flux cleaned = -0.0043907 Jy ! Component: 400 - total flux cleaned = -0.00466053 Jy ! Component: 450 - total flux cleaned = -0.00483517 Jy ! Component: 500 - total flux cleaned = -0.00500474 Jy ! Component: 550 - total flux cleaned = -0.00533225 Jy ! Component: 600 - total flux cleaned = -0.00549212 Jy ! Component: 650 - total flux cleaned = -0.00588215 Jy ! Component: 700 - total flux cleaned = -0.0059581 Jy ! Component: 750 - total flux cleaned = -0.00603348 Jy ! Component: 800 - total flux cleaned = -0.00625205 Jy ! Component: 850 - total flux cleaned = -0.00628731 Jy ! Component: 900 - total flux cleaned = -0.00642803 Jy ! Component: 950 - total flux cleaned = -0.00659949 Jy ! Component: 1000 - total flux cleaned = -0.0067677 Jy ! Component: 1050 - total flux cleaned = -0.00690003 Jy ! Component: 1100 - total flux cleaned = -0.00715887 Jy ! Component: 1150 - total flux cleaned = -0.00731802 Jy ! Component: 1200 - total flux cleaned = -0.00747385 Jy ! Component: 1250 - total flux cleaned = -0.00762737 Jy ! Component: 1300 - total flux cleaned = -0.00780895 Jy ! Component: 1350 - total flux cleaned = -0.00792814 Jy ! Component: 1400 - total flux cleaned = -0.00813329 Jy ! Component: 1450 - total flux cleaned = -0.00833471 Jy ! Component: 1500 - total flux cleaned = -0.00847648 Jy ! Component: 1550 - total flux cleaned = -0.00869981 Jy ! Component: 1600 - total flux cleaned = -0.0088929 Jy ! Component: 1650 - total flux cleaned = -0.00905577 Jy ! Component: 1700 - total flux cleaned = -0.00929711 Jy ! Component: 1750 - total flux cleaned = -0.00948253 Jy ! Component: 1800 - total flux cleaned = -0.00974348 Jy ! Component: 1850 - total flux cleaned = -0.00987202 Jy ! Component: 1900 - total flux cleaned = -0.0101011 Jy ! Component: 1950 - total flux cleaned = -0.0103773 Jy ! Component: 2000 - total flux cleaned = -0.0105507 Jy ! Component: 2050 - total flux cleaned = -0.0107958 Jy ! Component: 2100 - total flux cleaned = -0.0110374 Jy ! Component: 2150 - total flux cleaned = -0.0113005 Jy ! Component: 2200 - total flux cleaned = -0.0114896 Jy ! Component: 2250 - total flux cleaned = -0.0117936 Jy ! Component: 2300 - total flux cleaned = -0.0119789 Jy ! Component: 2350 - total flux cleaned = -0.0122767 Jy ! Component: 2400 - total flux cleaned = -0.0125262 Jy ! Component: 2450 - total flux cleaned = -0.0127954 Jy ! Component: 2500 - total flux cleaned = -0.0130174 Jy ! Component: 2550 - total flux cleaned = -0.0132154 Jy ! Component: 2600 - total flux cleaned = -0.0134984 Jy ! Component: 2650 - total flux cleaned = -0.0136711 Jy ! Component: 2700 - total flux cleaned = -0.0138846 Jy ! Component: 2750 - total flux cleaned = -0.014054 Jy ! Component: 2800 - total flux cleaned = -0.0143266 Jy ! Component: 2850 - total flux cleaned = -0.0145345 Jy ! Component: 2900 - total flux cleaned = -0.014802 Jy ! Component: 2950 - total flux cleaned = -0.0149856 Jy ! Component: 3000 - total flux cleaned = -0.0151677 Jy ! Component: 3050 - total flux cleaned = -0.0153083 Jy ! Component: 3100 - total flux cleaned = -0.0155278 Jy ! Component: 3150 - total flux cleaned = -0.0157652 Jy ! Component: 3200 - total flux cleaned = -0.0159222 Jy ! Component: 3250 - total flux cleaned = -0.0160589 Jy ! Component: 3300 - total flux cleaned = -0.01633 Jy ! Component: 3350 - total flux cleaned = -0.0165606 Jy ! Component: 3400 - total flux cleaned = -0.0167322 Jy ! Component: 3450 - total flux cleaned = -0.0168648 Jy ! Component: 3500 - total flux cleaned = -0.0170343 Jy ! Component: 3550 - total flux cleaned = -0.0171654 Jy ! Component: 3600 - total flux cleaned = -0.017314 Jy ! Component: 3650 - total flux cleaned = -0.0174434 Jy ! Component: 3700 - total flux cleaned = -0.0176452 Jy ! Component: 3750 - total flux cleaned = -0.017718 Jy ! Component: 3800 - total flux cleaned = -0.0179172 Jy ! Component: 3850 - total flux cleaned = -0.0180073 Jy ! Component: 3900 - total flux cleaned = -0.0181686 Jy ! Component: 3950 - total flux cleaned = -0.0183465 Jy ! Component: 4000 - total flux cleaned = -0.0184881 Jy ! Component: 4050 - total flux cleaned = -0.0186289 Jy ! Total flux subtracted in 4096 components = -0.0188216 Jy ! Clean residual min=-0.001150 max=0.000933 Jy/beam ! Clean residual mean=-0.000004 rms=0.000305 Jy/beam ! Combined flux in latest and established models = 0.512818 Jy keep ! Adding 259 model components to the UV plane model. ! The established model now contains 347 components and 0.512818 Jy ![Exited script file: muppet] wmap "J2257+0743_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.973 x 7.526 at -7.27 degrees (North through East) ! Clean map min=-0.0026585 max=0.44897 Jy/beam ! Writing clean map to FITS file: J2257+0743_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.448971 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000301618 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.20154 0.20154 0.403079 0.806158 1.61232 3.22463 6.44927 12.8985 25.7971 51.5941 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.448 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.973 x 7.526 at -7.27 degrees (North through East) ! Clean map min=-0.0026585 max=0.44897 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2257+0743_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 19:37:57 2017