! Started logfile: J2251+4030_S_2015_01_23_pus_uvs.log on Mon Jan 2 19:37:37 2017 obs J2251+4030_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J2251+4030_S_2015_01_23_pus_uva.fits ! AN table 1: 122 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.973588 visibilities/baseline/integration-bin. ! Found source: J2251+4030 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 21380 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2251+4030_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.022614Jy sigma=0.011297 ! Fit after self-cal, rms=0.966444Jy sigma=0.010943 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.838 mas, bmaj=4.884 mas, bpa=-8.626 degrees ! Estimated noise=839.73 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0372235 Jy ! Component: 100 - total flux cleaned = 0.0462333 Jy ! Total flux subtracted in 100 components = 0.0462333 Jy ! Clean residual min=-0.003178 max=0.003555 Jy/beam ! Clean residual mean=0.000003 rms=0.000764 Jy/beam ! Combined flux in latest and established models = 0.0462333 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0462333 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.254964Jy sigma=0.000782 ! Fit after self-cal, rms=0.254782Jy sigma=0.000779 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.439 mas, bmaj=5.659 mas, bpa=-8.742 degrees ! Estimated noise=458.878 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00547726 Jy ! Component: 100 - total flux cleaned = 0.00823246 Jy ! Component: 150 - total flux cleaned = 0.0098903 Jy ! Component: 200 - total flux cleaned = 0.0109263 Jy ! Total flux subtracted in 200 components = 0.0109263 Jy ! Clean residual min=-0.003082 max=0.002805 Jy/beam ! Clean residual mean=-0.000000 rms=0.000624 Jy/beam ! Combined flux in latest and established models = 0.0571596 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 41 components and 0.0571596 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.254234Jy sigma=0.000777 ! Fit after self-cal, rms=0.254223Jy sigma=0.000777 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.58 HN 1.01 KP 1.08 ! LA 0.95 MK 1.07 NL 1.02 OV 1.04 ! PT 1.10 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.72 HN 1.09 KP 1.10 ! LA 0.97 MK 1.06 NL 1.04 OV 1.07 ! PT 1.03 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.75 HN 0.99 KP 0.96 ! LA 0.84 MK 1.06 NL 1.20 OV 0.99 ! PT 1.02 SC 1.06 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 0.53 HN 0.96 KP 0.88 ! LA 0.83 MK 1.05 NL 1.07 OV 0.98 ! PT 1.10 SC 0.99 ! ! ! Fit before self-cal, rms=0.254223Jy sigma=0.000777 ! Fit after self-cal, rms=0.166361Jy sigma=0.000773 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.484 mas, bmaj=5.72 mas, bpa=-8.649 degrees ! Estimated noise=469.619 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00111918 Jy ! Component: 100 - total flux cleaned = 0.0016088 Jy ! Component: 150 - total flux cleaned = 0.00164032 Jy ! Component: 200 - total flux cleaned = 0.00164122 Jy ! Total flux subtracted in 200 components = 0.00164122 Jy ! Clean residual min=-0.002033 max=0.002009 Jy/beam ! Clean residual mean=-0.000001 rms=0.000516 Jy/beam ! Combined flux in latest and established models = 0.0588008 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 55 components and 0.0588008 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166303Jy sigma=0.000773 ! Fit after self-cal, rms=0.166119Jy sigma=0.000773 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166119Jy sigma=0.000773 ! Fit after self-cal, rms=0.092789Jy sigma=0.000770 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.499 mas, bmaj=5.744 mas, bpa=-8.438 degrees ! Estimated noise=467.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.24379e-05 Jy ! Component: 100 - total flux cleaned = 3.66205e-05 Jy ! Component: 150 - total flux cleaned = 4.83195e-05 Jy ! Component: 200 - total flux cleaned = 5.72235e-05 Jy ! Total flux subtracted in 200 components = 5.72235e-05 Jy ! Clean residual min=-0.001586 max=0.001711 Jy/beam ! Clean residual mean=0.000001 rms=0.000379 Jy/beam ! Combined flux in latest and established models = 0.0588581 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 59 components and 0.0588581 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092783Jy sigma=0.000770 ! Fit after self-cal, rms=0.092617Jy sigma=0.000770 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (25.5, -64). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000720824 Jy ! Component: 100 - total flux cleaned = 0.000940714 Jy ! Component: 150 - total flux cleaned = 0.00105029 Jy ! Component: 200 - total flux cleaned = 0.00108844 Jy ! Total flux subtracted in 200 components = 0.00108844 Jy ! Clean residual min=-0.001500 max=0.001333 Jy/beam ! Clean residual mean=0.000001 rms=0.000368 Jy/beam ! Combined flux in latest and established models = 0.0599465 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 76 components and 0.0599465 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092584Jy sigma=0.000769 ! Fit after self-cal, rms=0.092557Jy sigma=0.000769 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092557Jy sigma=0.000769 ! Fit after self-cal, rms=0.090360Jy sigma=0.000769 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.495 mas, bmaj=5.738 mas, bpa=-7.997 degrees ! Estimated noise=464.558 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000393727 Jy ! Component: 100 - total flux cleaned = 0.000514377 Jy ! Component: 150 - total flux cleaned = 0.000570061 Jy ! Component: 200 - total flux cleaned = 0.000601319 Jy ! Total flux subtracted in 200 components = 0.000601319 Jy ! Clean residual min=-0.001492 max=0.001328 Jy/beam ! Clean residual mean=0.000001 rms=0.000361 Jy/beam ! Combined flux in latest and established models = 0.0605478 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 82 components and 0.0605478 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090344Jy sigma=0.000769 ! Fit after self-cal, rms=0.090320Jy sigma=0.000769 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.92503e-05 Jy ! Component: 100 - total flux cleaned = 8.36118e-05 Jy ! Component: 150 - total flux cleaned = 0.000111767 Jy ! Component: 200 - total flux cleaned = 0.00012453 Jy ! Total flux subtracted in 200 components = 0.00012453 Jy ! Clean residual min=-0.001503 max=0.001346 Jy/beam ! Clean residual mean=0.000001 rms=0.000362 Jy/beam ! Combined flux in latest and established models = 0.0606724 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 93 components and 0.0606724 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090312Jy sigma=0.000769 ! Fit after self-cal, rms=0.090308Jy sigma=0.000769 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090308Jy sigma=0.000769 ! Fit after self-cal, rms=0.089750Jy sigma=0.000769 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.323 mas, bmaj=9.168 mas, bpa=-11.19 degrees ! Estimated noise=594.039 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000254225 Jy ! Component: 100 - total flux cleaned = 0.000303849 Jy ! Component: 150 - total flux cleaned = 0.00032225 Jy ! Component: 200 - total flux cleaned = 0.000323166 Jy ! Total flux subtracted in 200 components = 0.000323166 Jy ! Clean residual min=-0.002058 max=0.001794 Jy/beam ! Clean residual mean=0.000003 rms=0.000488 Jy/beam ! Combined flux in latest and established models = 0.0609955 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 98 components and 0.0609955 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089747Jy sigma=0.000769 ! Fit after self-cal, rms=0.089741Jy sigma=0.000769 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.14695e-05 Jy ! Component: 100 - total flux cleaned = 6.17487e-05 Jy ! Component: 150 - total flux cleaned = 5.99615e-05 Jy ! Component: 200 - total flux cleaned = 6.00543e-05 Jy ! Total flux subtracted in 200 components = 6.00543e-05 Jy ! Clean residual min=-0.002078 max=0.001753 Jy/beam ! Clean residual mean=0.000003 rms=0.000486 Jy/beam ! Combined flux in latest and established models = 0.0610556 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 100 components and 0.0610556 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089741Jy sigma=0.000769 ! Fit after self-cal, rms=0.089737Jy sigma=0.000769 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.49 mas, bmaj=5.731 mas, bpa=-7.722 degrees ! Estimated noise=462.428 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.49 x 5.731 at -7.722 degrees (North through East) ! Clean map min=-0.0022779 max=0.050235 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.871 mas, bmaj=4.925 mas, bpa=-7.73 degrees ! Estimated noise=855.049 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0380853 Jy ! Component: 100 - total flux cleaned = 0.0477947 Jy ! Component: 150 - total flux cleaned = 0.0519668 Jy ! Component: 200 - total flux cleaned = 0.0536986 Jy ! Total flux subtracted in 200 components = 0.0536986 Jy ! Clean residual min=-0.003268 max=0.002695 Jy/beam ! Clean residual mean=0.000002 rms=0.000718 Jy/beam ! Combined flux in latest and established models = 0.0536986 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.0536986 Jy ! Inverting map and beam ! Estimated beam: bmin=3.49 mas, bmaj=5.731 mas, bpa=-7.722 degrees ! Estimated noise=462.428 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00300956 Jy ! Component: 100 - total flux cleaned = 0.00425823 Jy ! Component: 150 - total flux cleaned = 0.00502927 Jy ! Component: 200 - total flux cleaned = 0.00559178 Jy ! Total flux subtracted in 200 components = 0.00559178 Jy ! Clean residual min=-0.001608 max=0.001427 Jy/beam ! Clean residual mean=0.000002 rms=0.000385 Jy/beam ! Combined flux in latest and established models = 0.0592904 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 43 components and 0.0592904 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.323 mas, bmaj=9.168 mas, bpa=-11.19 degrees ! Estimated noise=594.039 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000875841 Jy ! Component: 100 - total flux cleaned = 0.00122011 Jy ! Component: 150 - total flux cleaned = 0.00149098 Jy ! Component: 200 - total flux cleaned = 0.00164897 Jy ! Total flux subtracted in 200 components = 0.00164897 Jy ! Clean residual min=-0.002056 max=0.001717 Jy/beam ! Clean residual mean=0.000003 rms=0.000494 Jy/beam ! Combined flux in latest and established models = 0.0609394 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000144908 Jy ! Component: 100 - total flux cleaned = 0.000172904 Jy ! Component: 150 - total flux cleaned = 0.000185813 Jy ! Component: 200 - total flux cleaned = 0.000198197 Jy ! Total flux subtracted in 200 components = 0.000198197 Jy ! Clean residual min=-0.002081 max=0.001702 Jy/beam ! Clean residual mean=0.000003 rms=0.000489 Jy/beam ! Combined flux in latest and established models = 0.0611376 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 59 components and 0.0611376 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.49 mas, bmaj=5.731 mas, bpa=-7.722 degrees ! Estimated noise=462.428 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000570692 Jy ! Component: 100 - total flux cleaned = -0.000513503 Jy ! Component: 150 - total flux cleaned = -0.000463975 Jy ! Component: 200 - total flux cleaned = -0.000443545 Jy ! Total flux subtracted in 200 components = -0.000443545 Jy ! Clean residual min=-0.001517 max=0.001341 Jy/beam ! Clean residual mean=0.000002 rms=0.000365 Jy/beam ! Combined flux in latest and established models = 0.060694 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 70 components and 0.060694 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089747Jy sigma=0.000769 ! Fit after self-cal, rms=0.089741Jy sigma=0.000769 wmodel J2251+4030_S_2015_01_23_pus_map.mod ! Writing 70 model components to file: J2251+4030_S_2015_01_23_pus_map.mod wobs J2251+4030_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J2251+4030_S_2015_01_23_pus_uvs.fits wwins J2251+4030_S_2015_01_23_pus_map.win ! wwins: Wrote 2 windows to J2251+4030_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000697385 Jy ! Component: 100 - total flux cleaned = -0.00094991 Jy ! Component: 150 - total flux cleaned = -0.00116343 Jy ! Component: 200 - total flux cleaned = -0.00127713 Jy ! Component: 250 - total flux cleaned = -0.00134321 Jy ! Component: 300 - total flux cleaned = -0.00140738 Jy ! Component: 350 - total flux cleaned = -0.0015113 Jy ! Component: 400 - total flux cleaned = -0.00155206 Jy ! Component: 450 - total flux cleaned = -0.00165124 Jy ! Component: 500 - total flux cleaned = -0.00170923 Jy ! Component: 550 - total flux cleaned = -0.00176627 Jy ! Component: 600 - total flux cleaned = -0.00182214 Jy ! Component: 650 - total flux cleaned = -0.00189535 Jy ! Component: 700 - total flux cleaned = -0.00198484 Jy ! Component: 750 - total flux cleaned = -0.00203768 Jy ! Component: 800 - total flux cleaned = -0.00208966 Jy ! Component: 850 - total flux cleaned = -0.00210653 Jy ! Component: 900 - total flux cleaned = -0.00214017 Jy ! Component: 950 - total flux cleaned = -0.00218982 Jy ! Component: 1000 - total flux cleaned = -0.00220607 Jy ! Component: 1050 - total flux cleaned = -0.00225458 Jy ! Component: 1100 - total flux cleaned = -0.00228632 Jy ! Component: 1150 - total flux cleaned = -0.00233351 Jy ! Component: 1200 - total flux cleaned = -0.00231803 Jy ! Component: 1250 - total flux cleaned = -0.00233324 Jy ! Component: 1300 - total flux cleaned = -0.00233338 Jy ! Component: 1350 - total flux cleaned = -0.00234816 Jy ! Component: 1400 - total flux cleaned = -0.00234815 Jy ! Component: 1450 - total flux cleaned = -0.00236272 Jy ! Component: 1500 - total flux cleaned = -0.0023194 Jy ! Component: 1550 - total flux cleaned = -0.00230512 Jy ! Component: 1600 - total flux cleaned = -0.00234748 Jy ! Component: 1650 - total flux cleaned = -0.00229119 Jy ! Component: 1700 - total flux cleaned = -0.00234675 Jy ! Component: 1750 - total flux cleaned = -0.00230529 Jy ! Component: 1800 - total flux cleaned = -0.00230508 Jy ! Component: 1850 - total flux cleaned = -0.00230503 Jy ! Component: 1900 - total flux cleaned = -0.00229171 Jy ! Component: 1950 - total flux cleaned = -0.00229166 Jy ! Component: 2000 - total flux cleaned = -0.00229183 Jy ! Component: 2050 - total flux cleaned = -0.00233088 Jy ! Component: 2100 - total flux cleaned = -0.00230498 Jy ! Component: 2150 - total flux cleaned = -0.00233041 Jy ! Component: 2200 - total flux cleaned = -0.00227962 Jy ! Component: 2250 - total flux cleaned = -0.0022671 Jy ! Component: 2300 - total flux cleaned = -0.00230478 Jy ! Component: 2350 - total flux cleaned = -0.00231701 Jy ! Component: 2400 - total flux cleaned = -0.00234153 Jy ! Component: 2450 - total flux cleaned = -0.00229289 Jy ! Component: 2500 - total flux cleaned = -0.00229281 Jy ! Component: 2550 - total flux cleaned = -0.0023049 Jy ! Component: 2600 - total flux cleaned = -0.00228112 Jy ! Component: 2650 - total flux cleaned = -0.00229277 Jy ! Component: 2700 - total flux cleaned = -0.00224583 Jy ! Component: 2750 - total flux cleaned = -0.00226914 Jy ! Component: 2800 - total flux cleaned = -0.00224608 Jy ! Component: 2850 - total flux cleaned = -0.00221156 Jy ! Component: 2900 - total flux cleaned = -0.00218885 Jy ! Component: 2950 - total flux cleaned = -0.00220002 Jy ! Component: 3000 - total flux cleaned = -0.00220011 Jy ! Component: 3050 - total flux cleaned = -0.00223352 Jy ! Component: 3100 - total flux cleaned = -0.00218917 Jy ! Component: 3150 - total flux cleaned = -0.00221114 Jy ! Component: 3200 - total flux cleaned = -0.00220013 Jy ! Component: 3250 - total flux cleaned = -0.00221093 Jy ! Component: 3300 - total flux cleaned = -0.00216772 Jy ! Component: 3350 - total flux cleaned = -0.00215696 Jy ! Component: 3400 - total flux cleaned = -0.00219954 Jy ! Component: 3450 - total flux cleaned = -0.00219946 Jy ! Component: 3500 - total flux cleaned = -0.00216783 Jy ! Component: 3550 - total flux cleaned = -0.0021991 Jy ! Component: 3600 - total flux cleaned = -0.00219921 Jy ! Component: 3650 - total flux cleaned = -0.00218892 Jy ! Component: 3700 - total flux cleaned = -0.00220953 Jy ! Component: 3750 - total flux cleaned = -0.0022401 Jy ! Component: 3800 - total flux cleaned = -0.00221982 Jy ! Component: 3850 - total flux cleaned = -0.00220975 Jy ! Component: 3900 - total flux cleaned = -0.00222965 Jy ! Component: 3950 - total flux cleaned = -0.00217978 Jy ! Component: 4000 - total flux cleaned = -0.00215011 Jy ! Component: 4050 - total flux cleaned = -0.00215016 Jy ! Total flux subtracted in 4096 components = -0.00211083 Jy ! Clean residual min=-0.000610 max=0.000546 Jy/beam ! Clean residual mean=0.000001 rms=0.000185 Jy/beam ! Combined flux in latest and established models = 0.0585832 Jy keep ! Adding 308 model components to the UV plane model. ! The established model now contains 378 components and 0.0585832 Jy ![Exited script file: muppet] wmap "J2251+4030_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.49 x 5.731 at -7.722 degrees (North through East) ! Clean map min=-0.0024199 max=0.050012 Jy/beam ! Writing clean map to FITS file: J2251+4030_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0500116 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000182904 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.09717 1.09717 2.19434 4.38868 8.77735 17.5547 35.1094 70.2188 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.05 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.49 x 5.731 at -7.722 degrees (North through East) ! Clean map min=-0.0024199 max=0.050012 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2251+4030_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 19:37:42 2017