! Started logfile: J2249-1251_X_2014_05_31_pus_uvs.log on Sun Nov 27 18:13:34 2016
obs J2249-1251_X_2014_05_31_pus_uva.fits
! Reading UV FITS file: J2249-1251_X_2014_05_31_pus_uva.fits
! AN table 1: 101 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.981958 visibilities/baseline/integration-bin.
! Found source: J2249-1251
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.44388e+09      3.2e+07          1      3.2e+07
!  02        2  8.47588e+09      3.2e+07          1      3.2e+07
!  03        3  8.50788e+09      3.2e+07          1      3.2e+07
!  04        4  8.53988e+09      3.2e+07          1      3.2e+07
!  05        5  8.60388e+09      3.2e+07          1      3.2e+07
!  06        6  8.63588e+09      3.2e+07          1      3.2e+07
!  07        7  8.69988e+09      3.2e+07          1      3.2e+07
!  08        8  8.73188e+09      3.2e+07          1      3.2e+07
!  09        9  8.79588e+09      3.2e+07          1      3.2e+07
!  10       10  8.82788e+09      3.2e+07          1      3.2e+07
!  11       11  8.85988e+09      3.2e+07          1      3.2e+07
!  12       12  8.89188e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 344 lines of history.
! 
! Reading 53556 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@muppet J2249-1251_X_2014_05_31_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.967104Jy  sigma=0.011181
! Fit after  self-cal, rms=0.943619Jy  sigma=0.010921
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6285 mas, bmaj=1.715 mas, bpa=-2.963 degrees
! Estimated noise=641.717 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0420213 Jy
! Component: 100  -  total flux cleaned = 0.0569283 Jy
! Total flux subtracted in 100 components = 0.0569283 Jy
! Clean residual min=-0.003191 max=0.008784 Jy/beam
! Clean residual mean=-0.000006 rms=0.001119 Jy/beam
! Combined flux in latest and established models = 0.0569283 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.0569283 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073697Jy  sigma=0.000807
! Fit after  self-cal, rms=0.073508Jy  sigma=0.000805
! Inverting map 
! Added new window around map position (-0.6, 0.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00865289 Jy
! Component: 100  -  total flux cleaned = 0.0137872 Jy
! Total flux subtracted in 100 components = 0.0137872 Jy
! Clean residual min=-0.003055 max=0.006610 Jy/beam
! Clean residual mean=-0.000002 rms=0.000797 Jy/beam
! Combined flux in latest and established models = 0.0707155 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 26 components and 0.0707155 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072177Jy  sigma=0.000788
! Fit after  self-cal, rms=0.072129Jy  sigma=0.000787
! Inverting map 
! Added new window around map position (0.8, -0.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00551898 Jy
! Component: 100  -  total flux cleaned = 0.00844693 Jy
! Total flux subtracted in 100 components = 0.00844693 Jy
! Clean residual min=-0.002559 max=0.002198 Jy/beam
! Clean residual mean=-0.000000 rms=0.000610 Jy/beam
! Combined flux in latest and established models = 0.0791624 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 32 components and 0.0791624 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071733Jy  sigma=0.000782
! Fit after  self-cal, rms=0.071713Jy  sigma=0.000782
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8208 mas, bmaj=2.044 mas, bpa=-1.112 degrees
! Estimated noise=267.121 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00252351 Jy
! Component: 100  -  total flux cleaned = 0.0039003 Jy
! Component: 150  -  total flux cleaned = 0.00475838 Jy
! Component: 200  -  total flux cleaned = 0.00496146 Jy
! Total flux subtracted in 200 components = 0.00496146 Jy
! Clean residual min=-0.002647 max=0.001685 Jy/beam
! Clean residual mean=0.000004 rms=0.000560 Jy/beam
! Combined flux in latest and established models = 0.0841239 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 43 components and 0.0841239 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071610Jy  sigma=0.000781
! Fit after  self-cal, rms=0.071618Jy  sigma=0.000781
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.12     HN        1.04     KP        0.96     
!   LA        0.98     MK        1.03     NL        1.00     OV        0.98     
!   PT        1.04     SC        1.04     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.12     HN        1.06     KP        0.89     
!   LA        1.02     MK        0.98     NL        1.04     OV        0.98     
!   PT        0.96     SC        1.04     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.08     HN        1.06     KP        0.84     
!   LA        1.05     MK        1.02     NL        1.05     OV        0.97     
!   PT        0.99     SC        0.94     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.06     HN        1.06     KP        0.83     
!   LA        1.07     MK        1.05     NL        1.08     OV        0.95     
!   PT        0.95     SC        0.96     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.08     HN        1.02     KP        0.76     
!   LA        1.06     MK        0.95     NL        1.06     OV        0.96     
!   PT        0.96     SC        0.93     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.09     HN        1.05     KP        0.80     
!   LA        1.05     MK        0.96     NL        1.11     OV        0.96     
!   PT        0.97     SC        0.98     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.13     HN        1.17     KP        0.84     
!   LA        1.12     MK        1.00     NL        1.08     OV        1.04     
!   PT        1.05     SC        0.94     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.14     HN        1.17     KP        0.78     
!   LA        1.00     MK        1.04     NL        1.03     OV        1.04     
!   PT        0.97     SC        0.93     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.17     HN        1.06     KP        0.82     
!   LA        1.07     MK        0.93     NL        1.00     OV        1.01     
!   PT        0.99     SC        0.85     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.04     HN        1.05     KP        0.82     
!   LA        1.05     MK        1.01     NL        1.06     OV        0.98     
!   PT        0.97     SC        0.86     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        1.12     HN        0.99     KP        0.83     
!   LA        1.09     MK        0.93     NL        1.05     OV        1.02     
!   PT        1.00     SC        0.83     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        1.13     HN        1.09     KP        0.87     
!   LA        1.01     MK        1.02     NL        1.03     OV        1.07     
!   PT        1.05     SC        0.76     
! 
! 
! Fit before self-cal, rms=0.071618Jy  sigma=0.000781
! Fit after  self-cal, rms=0.070291Jy  sigma=0.000776
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8128 mas, bmaj=2.013 mas, bpa=-0.0582 degrees
! Estimated noise=263.423 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000383763 Jy
! Component: 100  -  total flux cleaned = 0.000339268 Jy
! Component: 150  -  total flux cleaned = 0.000281356 Jy
! Component: 200  -  total flux cleaned = 0.000230472 Jy
! Total flux subtracted in 200 components = 0.000230472 Jy
! Clean residual min=-0.001142 max=0.001208 Jy/beam
! Clean residual mean=0.000006 rms=0.000304 Jy/beam
! Combined flux in latest and established models = 0.0843544 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 48 components and 0.0843544 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070277Jy  sigma=0.000775
! Fit after  self-cal, rms=0.070293Jy  sigma=0.000775
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070293Jy  sigma=0.000775
! Fit after  self-cal, rms=0.070355Jy  sigma=0.000774
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8093 mas, bmaj=1.998 mas, bpa=0.3499 degrees
! Estimated noise=262.506 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000404692 Jy
! Component: 100  -  total flux cleaned = 0.000386768 Jy
! Component: 150  -  total flux cleaned = 0.000387334 Jy
! Component: 200  -  total flux cleaned = 0.000355916 Jy
! Total flux subtracted in 200 components = 0.000355916 Jy
! Clean residual min=-0.001148 max=0.001104 Jy/beam
! Clean residual mean=0.000005 rms=0.000291 Jy/beam
! Combined flux in latest and established models = 0.0847103 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 55 components and 0.0847103 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070346Jy  sigma=0.000774
! Fit after  self-cal, rms=0.070359Jy  sigma=0.000774
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.56333e-05 Jy
! Component: 100  -  total flux cleaned = 7.99991e-06 Jy
! Component: 150  -  total flux cleaned = -8.25594e-06 Jy
! Component: 200  -  total flux cleaned = -2.33865e-05 Jy
! Total flux subtracted in 200 components = -2.33865e-05 Jy
! Clean residual min=-0.001139 max=0.001099 Jy/beam
! Clean residual mean=0.000005 rms=0.000290 Jy/beam
! Combined flux in latest and established models = 0.0846869 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 55 components and 0.0846869 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070351Jy  sigma=0.000774
! Fit after  self-cal, rms=0.070350Jy  sigma=0.000774
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070350Jy  sigma=0.000774
! Fit after  self-cal, rms=0.070100Jy  sigma=0.000774
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8048 mas, bmaj=1.987 mas, bpa=0.6265 degrees
! Estimated noise=261.009 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000302452 Jy
! Component: 100  -  total flux cleaned = 0.000320023 Jy
! Component: 150  -  total flux cleaned = 0.00030408 Jy
! Component: 200  -  total flux cleaned = 0.000274274 Jy
! Total flux subtracted in 200 components = 0.000274274 Jy
! Clean residual min=-0.001103 max=0.001083 Jy/beam
! Clean residual mean=0.000005 rms=0.000285 Jy/beam
! Combined flux in latest and established models = 0.0849612 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 56 components and 0.0849612 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070092Jy  sigma=0.000774
! Fit after  self-cal, rms=0.070092Jy  sigma=0.000774
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.30717e-05 Jy
! Component: 100  -  total flux cleaned = 3.05817e-05 Jy
! Component: 150  -  total flux cleaned = -8.64795e-07 Jy
! Component: 200  -  total flux cleaned = -4.46044e-05 Jy
! Total flux subtracted in 200 components = -4.46044e-05 Jy
! Clean residual min=-0.001102 max=0.001081 Jy/beam
! Clean residual mean=0.000005 rms=0.000285 Jy/beam
! Combined flux in latest and established models = 0.0849166 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 57 components and 0.0849166 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070085Jy  sigma=0.000774
! Fit after  self-cal, rms=0.070084Jy  sigma=0.000774
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070084Jy  sigma=0.000774
! Fit after  self-cal, rms=0.069706Jy  sigma=0.000774
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.145 mas, bmaj=4.071 mas, bpa=5.361 degrees
! Estimated noise=341.388 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000133102 Jy
! Component: 100  -  total flux cleaned = -0.000200859 Jy
! Component: 150  -  total flux cleaned = -0.000222891 Jy
! Component: 200  -  total flux cleaned = -0.000251744 Jy
! Total flux subtracted in 200 components = -0.000251744 Jy
! Clean residual min=-0.001364 max=0.001652 Jy/beam
! Clean residual mean=0.000011 rms=0.000484 Jy/beam
! Combined flux in latest and established models = 0.0846648 Jy
selfcal
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 59 components and 0.0846649 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069704Jy  sigma=0.000774
! Fit after  self-cal, rms=0.069702Jy  sigma=0.000774
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.3359e-05 Jy
! Component: 100  -  total flux cleaned = -7.18105e-05 Jy
! Component: 150  -  total flux cleaned = -8.76413e-05 Jy
! Component: 200  -  total flux cleaned = -0.000108649 Jy
! Total flux subtracted in 200 components = -0.000108649 Jy
! Clean residual min=-0.001345 max=0.001652 Jy/beam
! Clean residual mean=0.000011 rms=0.000481 Jy/beam
! Combined flux in latest and established models = 0.0845562 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 59 components and 0.0845562 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069703Jy  sigma=0.000774
! Fit after  self-cal, rms=0.069701Jy  sigma=0.000774
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8002 mas, bmaj=1.976 mas, bpa=0.9384 degrees
! Estimated noise=259.19 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8002 x 1.976 at 0.9384 degrees (North through East)
! Clean map  min=-0.00092263  max=0.051939 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6171 mas, bmaj=1.668 mas, bpa=-1.022 degrees
! Estimated noise=609.661 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0406731 Jy
! Component: 100  -  total flux cleaned = 0.0575836 Jy
! Component: 150  -  total flux cleaned = 0.0674207 Jy
! Component: 200  -  total flux cleaned = 0.0737068 Jy
! Total flux subtracted in 200 components = 0.0737068 Jy
! Clean residual min=-0.002149 max=0.003342 Jy/beam
! Clean residual mean=-0.000001 rms=0.000576 Jy/beam
! Combined flux in latest and established models = 0.0737067 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.0737067 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8002 mas, bmaj=1.976 mas, bpa=0.9384 degrees
! Estimated noise=259.19 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00517033 Jy
! Component: 100  -  total flux cleaned = 0.00790965 Jy
! Component: 150  -  total flux cleaned = 0.00950017 Jy
! Component: 200  -  total flux cleaned = 0.0104535 Jy
! Total flux subtracted in 200 components = 0.0104535 Jy
! Clean residual min=-0.001107 max=0.000998 Jy/beam
! Clean residual mean=0.000004 rms=0.000288 Jy/beam
! Combined flux in latest and established models = 0.0841603 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 39 components and 0.0841603 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.145 mas, bmaj=4.071 mas, bpa=5.361 degrees
! Estimated noise=341.388 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000482171 Jy
! Component: 100  -  total flux cleaned = 0.000522651 Jy
! Component: 150  -  total flux cleaned = 0.00055402 Jy
! Component: 200  -  total flux cleaned = 0.000531691 Jy
! Total flux subtracted in 200 components = 0.000531691 Jy
! Clean residual min=-0.001412 max=0.001605 Jy/beam
! Clean residual mean=0.000011 rms=0.000485 Jy/beam
! Combined flux in latest and established models = 0.0846919 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.99278e-05 Jy
! Component: 100  -  total flux cleaned = -2.89173e-05 Jy
! Component: 150  -  total flux cleaned = -3.72405e-05 Jy
! Component: 200  -  total flux cleaned = -4.42885e-05 Jy
! Total flux subtracted in 200 components = -4.42885e-05 Jy
! Clean residual min=-0.001380 max=0.001623 Jy/beam
! Clean residual mean=0.000011 rms=0.000481 Jy/beam
! Combined flux in latest and established models = 0.0846477 Jy
! Adding 19 model components to the UV plane model.
! The established model now contains 52 components and 0.0846477 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8002 mas, bmaj=1.976 mas, bpa=0.9384 degrees
! Estimated noise=259.19 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.10204e-05 Jy
! Component: 100  -  total flux cleaned = 0.000170852 Jy
! Component: 150  -  total flux cleaned = 0.000234347 Jy
! Component: 200  -  total flux cleaned = 0.000274169 Jy
! Total flux subtracted in 200 components = 0.000274169 Jy
! Clean residual min=-0.000989 max=0.001022 Jy/beam
! Clean residual mean=0.000005 rms=0.000275 Jy/beam
! Combined flux in latest and established models = 0.0849218 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 62 components and 0.0849218 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069688Jy  sigma=0.000774
! Fit after  self-cal, rms=0.069678Jy  sigma=0.000773
wmodel J2249-1251_X_2014_05_31_pus_map.mod
! Writing 62 model components to file: J2249-1251_X_2014_05_31_pus_map.mod
wobs J2249-1251_X_2014_05_31_pus_uvs.fits
! Writing UV FITS file: J2249-1251_X_2014_05_31_pus_uvs.fits
wwins J2249-1251_X_2014_05_31_pus_map.win
! wwins: Wrote 3 windows to J2249-1251_X_2014_05_31_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000174686 Jy
! Component: 100  -  total flux cleaned = 0.000192684 Jy
! Component: 150  -  total flux cleaned = 0.000241791 Jy
! Component: 200  -  total flux cleaned = 0.000241193 Jy
! Component: 250  -  total flux cleaned = 0.000315934 Jy
! Component: 300  -  total flux cleaned = 0.000344962 Jy
! Component: 350  -  total flux cleaned = 0.000345501 Jy
! Component: 400  -  total flux cleaned = 0.000359129 Jy
! Component: 450  -  total flux cleaned = 0.000332967 Jy
! Component: 500  -  total flux cleaned = 0.000358196 Jy
! Component: 550  -  total flux cleaned = 0.000321161 Jy
! Component: 600  -  total flux cleaned = 0.000333466 Jy
! Component: 650  -  total flux cleaned = 0.000345399 Jy
! Component: 700  -  total flux cleaned = 0.000379802 Jy
! Component: 750  -  total flux cleaned = 0.000413384 Jy
! Component: 800  -  total flux cleaned = 0.000456938 Jy
! Component: 850  -  total flux cleaned = 0.000488892 Jy
! Component: 900  -  total flux cleaned = 0.000509626 Jy
! Component: 950  -  total flux cleaned = 0.000509531 Jy
! Component: 1000  -  total flux cleaned = 0.00052967 Jy
! Component: 1050  -  total flux cleaned = 0.000489926 Jy
! Component: 1100  -  total flux cleaned = 0.00049966 Jy
! Component: 1150  -  total flux cleaned = 0.000509175 Jy
! Component: 1200  -  total flux cleaned = 0.000527904 Jy
! Component: 1250  -  total flux cleaned = 0.000555695 Jy
! Component: 1300  -  total flux cleaned = 0.000582889 Jy
! Component: 1350  -  total flux cleaned = 0.000627489 Jy
! Component: 1400  -  total flux cleaned = 0.00066248 Jy
! Component: 1450  -  total flux cleaned = 0.000670967 Jy
! Component: 1500  -  total flux cleaned = 0.000679522 Jy
! Component: 1550  -  total flux cleaned = 0.000696295 Jy
! Component: 1600  -  total flux cleaned = 0.000712685 Jy
! Component: 1650  -  total flux cleaned = 0.000745304 Jy
! Component: 1700  -  total flux cleaned = 0.00076945 Jy
! Component: 1750  -  total flux cleaned = 0.000801014 Jy
! Component: 1800  -  total flux cleaned = 0.000801021 Jy
! Component: 1850  -  total flux cleaned = 0.000824391 Jy
! Component: 1900  -  total flux cleaned = 0.000854974 Jy
! Component: 1950  -  total flux cleaned = 0.000862642 Jy
! Component: 2000  -  total flux cleaned = 0.0008554 Jy
! Total flux subtracted in 2048 components = 0.00087756 Jy
! Clean residual min=-0.000420 max=0.000528 Jy/beam
! Clean residual mean=0.000002 rms=0.000139 Jy/beam
! Combined flux in latest and established models = 0.0857994 Jy
keep
! Adding 147 model components to the UV plane model.
! The established model now contains 208 components and 0.0857994 Jy
![Exited script file: muppet]
wmap "J2249-1251_X_2014_05_31_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8002 x 1.976 at 0.9384 degrees (North through East)
! Clean map  min=-0.00076536  max=0.051477 Jy/beam
! Writing clean map to FITS file: J2249-1251_X_2014_05_31_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0514775 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000138307 
device "J2249-1251_X_2014_05_31_pus\_map.eps/VPS"
! Attempting to open device: 'J2249-1251_X_2014_05_31_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.806026 0.806026 1.61205 3.2241 6.4482 12.8964 25.7928 51.5856
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0004 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.051 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8002 x 1.976 at 0.9384 degrees (North through East)
! Clean map  min=-0.00076536  max=0.051477 Jy/beam
quit
! Quitting program
! Log file J2249-1251_X_2014_05_31_pus_uvs.log closed on Sun Nov 27 18:13:37 2016