! Started logfile: J2248-3235_S_2014_05_31_pus_uvs.log on Mon Nov 28 15:39:30 2016 obs J2248-3235_S_2014_05_31_pus_uva.fits ! Reading UV FITS file: J2248-3235_S_2014_05_31_pus_uva.fits ! AN table 1: 74 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.706306 visibilities/baseline/integration-bin. ! Found source: J2248-3235 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 9408 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2248-3235_S_2014_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 129 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 129 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 129 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 129 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.547350Jy sigma=0.004433 ! Fit after self-cal, rms=0.536253Jy sigma=0.004331 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.539 mas, bmaj=7.49 mas, bpa=-2.549 degrees ! Estimated noise=1244.51 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.36535 Jy ! Component: 100 - total flux cleaned = 0.445168 Jy ! Total flux subtracted in 100 components = 0.445168 Jy ! Clean residual min=-0.016205 max=0.036936 Jy/beam ! Clean residual mean=-0.000235 rms=0.004344 Jy/beam ! Combined flux in latest and established models = 0.445168 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.445168 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155617Jy sigma=0.001209 ! Fit after self-cal, rms=0.155614Jy sigma=0.001209 ! Inverting map ! Added new window around map position (6, 0.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0354134 Jy ! Component: 100 - total flux cleaned = 0.0572812 Jy ! Total flux subtracted in 100 components = 0.0572812 Jy ! Clean residual min=-0.013599 max=0.032976 Jy/beam ! Clean residual mean=-0.000141 rms=0.003583 Jy/beam ! Combined flux in latest and established models = 0.50245 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 18 components and 0.50245 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142505Jy sigma=0.001073 ! Fit after self-cal, rms=0.141817Jy sigma=0.001063 ! Inverting map ! Added new window around map position (-5.5, -1.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0270006 Jy ! Component: 100 - total flux cleaned = 0.0452395 Jy ! Total flux subtracted in 100 components = 0.0452395 Jy ! Clean residual min=-0.013438 max=0.016805 Jy/beam ! Clean residual mean=-0.000068 rms=0.003052 Jy/beam ! Combined flux in latest and established models = 0.547689 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 32 components and 0.547689 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133398Jy sigma=0.000991 ! Fit after self-cal, rms=0.133312Jy sigma=0.000990 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.263 mas, bmaj=9.508 mas, bpa=-2.235 degrees ! Estimated noise=887.829 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0213448 Jy ! Component: 100 - total flux cleaned = 0.0338366 Jy ! Component: 150 - total flux cleaned = 0.0417757 Jy ! Component: 200 - total flux cleaned = 0.0461055 Jy ! Total flux subtracted in 200 components = 0.0461055 Jy ! Clean residual min=-0.011279 max=0.010972 Jy/beam ! Clean residual mean=0.000066 rms=0.002609 Jy/beam ! Combined flux in latest and established models = 0.593795 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 59 components and 0.593795 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129222Jy sigma=0.000962 ! Fit after self-cal, rms=0.129106Jy sigma=0.000962 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.82 HN 1.18 KP 1.05 ! LA 1.18 MK 0.98 NL 0.98 OV 0.96 ! PT 1.03 SC 0.95 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.98 HN 1.27 KP 1.02 ! LA 1.14 MK 1.00 NL 1.03 OV 1.00 ! PT 1.00 SC 1.01 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.11 HN 1.27 KP 0.92 ! LA 0.90 MK 1.01 NL 0.99 OV 0.92 ! PT 0.98 SC 1.01 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.98 HN 1.24 KP 0.89 ! LA 0.86 MK 1.01 NL 1.05 OV 0.97 ! PT 1.02 SC 0.96 ! ! ! Fit before self-cal, rms=0.129106Jy sigma=0.000962 ! Fit after self-cal, rms=0.117922Jy sigma=0.000828 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.272 mas, bmaj=9.48 mas, bpa=-1.806 degrees ! Estimated noise=893.797 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0074034 Jy ! Component: 100 - total flux cleaned = -0.00810778 Jy ! Component: 150 - total flux cleaned = -0.00832328 Jy ! Component: 200 - total flux cleaned = -0.00832632 Jy ! Total flux subtracted in 200 components = -0.00832632 Jy ! Clean residual min=-0.008271 max=0.007525 Jy/beam ! Clean residual mean=-0.000009 rms=0.001790 Jy/beam ! Combined flux in latest and established models = 0.585468 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 80 components and 0.585468 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116933Jy sigma=0.000819 ! Fit after self-cal, rms=0.116920Jy sigma=0.000819 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116920Jy sigma=0.000819 ! Fit after self-cal, rms=0.119061Jy sigma=0.000804 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.294 mas, bmaj=9.515 mas, bpa=-1.772 degrees ! Estimated noise=895.845 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00652614 Jy ! Component: 100 - total flux cleaned = -0.00757169 Jy ! Component: 150 - total flux cleaned = -0.00771462 Jy ! Component: 200 - total flux cleaned = -0.00771511 Jy ! Total flux subtracted in 200 components = -0.00771511 Jy ! Clean residual min=-0.007031 max=0.006342 Jy/beam ! Clean residual mean=-0.000032 rms=0.001473 Jy/beam ! Combined flux in latest and established models = 0.577753 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 105 components and 0.577753 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118526Jy sigma=0.000800 ! Fit after self-cal, rms=0.118497Jy sigma=0.000799 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000493384 Jy ! Component: 100 - total flux cleaned = -2.34194e-05 Jy ! Component: 150 - total flux cleaned = 7.90495e-05 Jy ! Component: 200 - total flux cleaned = 7.92032e-05 Jy ! Total flux subtracted in 200 components = 7.92032e-05 Jy ! Clean residual min=-0.006842 max=0.006047 Jy/beam ! Clean residual mean=-0.000032 rms=0.001436 Jy/beam ! Combined flux in latest and established models = 0.577833 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 111 components and 0.577832 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118294Jy sigma=0.000797 ! Fit after self-cal, rms=0.118249Jy sigma=0.000797 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118249Jy sigma=0.000797 ! Fit after self-cal, rms=0.119267Jy sigma=0.000783 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.298 mas, bmaj=9.534 mas, bpa=-1.72 degrees ! Estimated noise=895.203 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00438591 Jy ! Component: 100 - total flux cleaned = -0.00535102 Jy ! Component: 150 - total flux cleaned = -0.00588568 Jy ! Component: 200 - total flux cleaned = -0.00618954 Jy ! Total flux subtracted in 200 components = -0.00618954 Jy ! Clean residual min=-0.005938 max=0.003952 Jy/beam ! Clean residual mean=-0.000010 rms=0.001094 Jy/beam ! Combined flux in latest and established models = 0.571643 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 121 components and 0.571643 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119040Jy sigma=0.000780 ! Fit after self-cal, rms=0.119051Jy sigma=0.000780 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000493674 Jy ! Component: 100 - total flux cleaned = -0.000363162 Jy ! Component: 150 - total flux cleaned = -0.000362505 Jy ! Component: 200 - total flux cleaned = -0.000413468 Jy ! Total flux subtracted in 200 components = -0.000413468 Jy ! Clean residual min=-0.005750 max=0.004017 Jy/beam ! Clean residual mean=-0.000012 rms=0.001077 Jy/beam ! Combined flux in latest and established models = 0.571229 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 124 components and 0.57123 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118981Jy sigma=0.000780 ! Fit after self-cal, rms=0.118958Jy sigma=0.000780 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118958Jy sigma=0.000780 ! Fit after self-cal, rms=0.120015Jy sigma=0.000779 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.366 mas, bmaj=23.04 mas, bpa=-2.038 degrees ! Estimated noise=1063.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00359034 Jy ! Component: 100 - total flux cleaned = -0.0050566 Jy ! Component: 150 - total flux cleaned = -0.00523734 Jy ! Component: 200 - total flux cleaned = -0.00536059 Jy ! Total flux subtracted in 200 components = -0.00536059 Jy ! Clean residual min=-0.005836 max=0.004716 Jy/beam ! Clean residual mean=-0.000019 rms=0.001369 Jy/beam ! Combined flux in latest and established models = 0.565869 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 133 components and 0.565869 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119974Jy sigma=0.000778 ! Fit after self-cal, rms=0.119964Jy sigma=0.000778 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00014937 Jy ! Component: 100 - total flux cleaned = -6.03587e-05 Jy ! Component: 150 - total flux cleaned = -1.17303e-05 Jy ! Component: 200 - total flux cleaned = 1.11666e-05 Jy ! Total flux subtracted in 200 components = 1.11666e-05 Jy ! Clean residual min=-0.005731 max=0.004816 Jy/beam ! Clean residual mean=-0.000019 rms=0.001365 Jy/beam ! Combined flux in latest and established models = 0.56588 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 139 components and 0.56588 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119944Jy sigma=0.000778 ! Fit after self-cal, rms=0.119935Jy sigma=0.000778 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.298 mas, bmaj=9.534 mas, bpa=-1.734 degrees ! Estimated noise=894.936 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.298 x 9.534 at -1.734 degrees (North through East) ! Clean map min=-0.0047763 max=0.46701 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.544 mas, bmaj=7.422 mas, bpa=-2.025 degrees ! Estimated noise=1294.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.373242 Jy ! Component: 100 - total flux cleaned = 0.455083 Jy ! Component: 150 - total flux cleaned = 0.481112 Jy ! Component: 200 - total flux cleaned = 0.498852 Jy ! Total flux subtracted in 200 components = 0.498852 Jy ! Clean residual min=-0.005998 max=0.010824 Jy/beam ! Clean residual mean=-0.000110 rms=0.001703 Jy/beam ! Combined flux in latest and established models = 0.498852 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.498852 Jy ! Inverting map and beam ! Estimated beam: bmin=3.298 mas, bmaj=9.534 mas, bpa=-1.734 degrees ! Estimated noise=894.936 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0245898 Jy ! Component: 100 - total flux cleaned = 0.0391269 Jy ! Component: 150 - total flux cleaned = 0.0485259 Jy ! Component: 200 - total flux cleaned = 0.0548014 Jy ! Total flux subtracted in 200 components = 0.0548014 Jy ! Clean residual min=-0.004909 max=0.004501 Jy/beam ! Clean residual mean=-0.000051 rms=0.001153 Jy/beam ! Combined flux in latest and established models = 0.553653 Jy ! Adding 72 model components to the UV plane model. ! The established model now contains 88 components and 0.553653 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.366 mas, bmaj=23.04 mas, bpa=-2.038 degrees ! Estimated noise=1063.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00618147 Jy ! Component: 100 - total flux cleaned = 0.00927699 Jy ! Component: 150 - total flux cleaned = 0.0104812 Jy ! Component: 200 - total flux cleaned = 0.0107324 Jy ! Total flux subtracted in 200 components = 0.0107324 Jy ! Clean residual min=-0.006044 max=0.004717 Jy/beam ! Clean residual mean=-0.000028 rms=0.001401 Jy/beam ! Combined flux in latest and established models = 0.564386 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000204969 Jy ! Component: 100 - total flux cleaned = 0.000372185 Jy ! Component: 150 - total flux cleaned = 0.000457923 Jy ! Component: 200 - total flux cleaned = 0.000485735 Jy ! Total flux subtracted in 200 components = 0.000485735 Jy ! Clean residual min=-0.005908 max=0.004721 Jy/beam ! Clean residual mean=-0.000025 rms=0.001387 Jy/beam ! Combined flux in latest and established models = 0.564871 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 118 components and 0.564871 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.298 mas, bmaj=9.534 mas, bpa=-1.734 degrees ! Estimated noise=894.936 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000157279 Jy ! Component: 100 - total flux cleaned = 2.63846e-05 Jy ! Component: 150 - total flux cleaned = 2.64128e-05 Jy ! Component: 200 - total flux cleaned = 2.60993e-05 Jy ! Total flux subtracted in 200 components = 2.60993e-05 Jy ! Clean residual min=-0.004708 max=0.003835 Jy/beam ! Clean residual mean=-0.000012 rms=0.000997 Jy/beam ! Combined flux in latest and established models = 0.564897 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 127 components and 0.564897 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119934Jy sigma=0.000778 ! Fit after self-cal, rms=0.119897Jy sigma=0.000778 wmodel J2248-3235_S_2014_05_31_pus_map.mod ! Writing 127 model components to file: J2248-3235_S_2014_05_31_pus_map.mod wobs J2248-3235_S_2014_05_31_pus_uvs.fits ! Writing UV FITS file: J2248-3235_S_2014_05_31_pus_uvs.fits wwins J2248-3235_S_2014_05_31_pus_map.win ! wwins: Wrote 3 windows to J2248-3235_S_2014_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00209816 Jy ! Component: 100 - total flux cleaned = -0.00347279 Jy ! Component: 150 - total flux cleaned = -0.00440074 Jy ! Component: 200 - total flux cleaned = -0.0052113 Jy ! Component: 250 - total flux cleaned = -0.0059196 Jy ! Component: 300 - total flux cleaned = -0.00637338 Jy ! Component: 350 - total flux cleaned = -0.00670325 Jy ! Component: 400 - total flux cleaned = -0.00702321 Jy ! Component: 450 - total flux cleaned = -0.00733352 Jy ! Component: 500 - total flux cleaned = -0.0075857 Jy ! Component: 550 - total flux cleaned = -0.00787935 Jy ! Component: 600 - total flux cleaned = -0.00792756 Jy ! Component: 650 - total flux cleaned = -0.00802132 Jy ! Component: 700 - total flux cleaned = -0.00811319 Jy ! Component: 750 - total flux cleaned = -0.00829215 Jy ! Component: 800 - total flux cleaned = -0.0083791 Jy ! Component: 850 - total flux cleaned = -0.00850691 Jy ! Component: 900 - total flux cleaned = -0.00837969 Jy ! Component: 950 - total flux cleaned = -0.00838003 Jy ! Component: 1000 - total flux cleaned = -0.00842111 Jy ! Component: 1050 - total flux cleaned = -0.00854106 Jy ! Component: 1100 - total flux cleaned = -0.0086987 Jy ! Component: 1150 - total flux cleaned = -0.00889311 Jy ! Component: 1200 - total flux cleaned = -0.00900779 Jy ! Component: 1250 - total flux cleaned = -0.0090073 Jy ! Component: 1300 - total flux cleaned = -0.00915754 Jy ! Component: 1350 - total flux cleaned = -0.00926858 Jy ! Component: 1400 - total flux cleaned = -0.00934186 Jy ! Component: 1450 - total flux cleaned = -0.00948649 Jy ! Component: 1500 - total flux cleaned = -0.00945153 Jy ! Component: 1550 - total flux cleaned = -0.00969952 Jy ! Component: 1600 - total flux cleaned = -0.00983928 Jy ! Component: 1650 - total flux cleaned = -0.00994316 Jy ! Component: 1700 - total flux cleaned = -0.0100461 Jy ! Component: 1750 - total flux cleaned = -0.0102832 Jy ! Component: 1800 - total flux cleaned = -0.0102161 Jy ! Component: 1850 - total flux cleaned = -0.0103159 Jy ! Component: 1900 - total flux cleaned = -0.0103819 Jy ! Component: 1950 - total flux cleaned = -0.0105124 Jy ! Component: 2000 - total flux cleaned = -0.0106096 Jy ! Component: 2050 - total flux cleaned = -0.0106094 Jy ! Component: 2100 - total flux cleaned = -0.0106411 Jy ! Component: 2150 - total flux cleaned = -0.0106093 Jy ! Component: 2200 - total flux cleaned = -0.0107032 Jy ! Component: 2250 - total flux cleaned = -0.0107963 Jy ! Component: 2300 - total flux cleaned = -0.0107966 Jy ! Component: 2350 - total flux cleaned = -0.0109798 Jy ! Component: 2400 - total flux cleaned = -0.01101 Jy ! Component: 2450 - total flux cleaned = -0.0111003 Jy ! Component: 2500 - total flux cleaned = -0.0111603 Jy ! Component: 2550 - total flux cleaned = -0.0113671 Jy ! Component: 2600 - total flux cleaned = -0.0113964 Jy ! Component: 2650 - total flux cleaned = -0.0115709 Jy ! Component: 2700 - total flux cleaned = -0.0116575 Jy ! Component: 2750 - total flux cleaned = -0.0117144 Jy ! Component: 2800 - total flux cleaned = -0.0118279 Jy ! Component: 2850 - total flux cleaned = -0.0118848 Jy ! Component: 2900 - total flux cleaned = -0.0120247 Jy ! Component: 2950 - total flux cleaned = -0.0121086 Jy ! Component: 3000 - total flux cleaned = -0.0122191 Jy ! Component: 3050 - total flux cleaned = -0.0122463 Jy ! Component: 3100 - total flux cleaned = -0.0123553 Jy ! Component: 3150 - total flux cleaned = -0.0125176 Jy ! Component: 3200 - total flux cleaned = -0.0126247 Jy ! Component: 3250 - total flux cleaned = -0.0127049 Jy ! Component: 3300 - total flux cleaned = -0.0128109 Jy ! Component: 3350 - total flux cleaned = -0.0128109 Jy ! Component: 3400 - total flux cleaned = -0.0129416 Jy ! Component: 3450 - total flux cleaned = -0.0129938 Jy ! Component: 3500 - total flux cleaned = -0.0130195 Jy ! Component: 3550 - total flux cleaned = -0.0130452 Jy ! Component: 3600 - total flux cleaned = -0.0130195 Jy ! Component: 3650 - total flux cleaned = -0.0130953 Jy ! Component: 3700 - total flux cleaned = -0.01312 Jy ! Component: 3750 - total flux cleaned = -0.01307 Jy ! Component: 3800 - total flux cleaned = -0.0131449 Jy ! Component: 3850 - total flux cleaned = -0.0132189 Jy ! Component: 3900 - total flux cleaned = -0.0131944 Jy ! Component: 3950 - total flux cleaned = -0.0132678 Jy ! Component: 4000 - total flux cleaned = -0.0133409 Jy ! Component: 4050 - total flux cleaned = -0.0133892 Jy ! Total flux subtracted in 4096 components = -0.0133169 Jy ! Clean residual min=-0.001344 max=0.001392 Jy/beam ! Clean residual mean=-0.000003 rms=0.000466 Jy/beam ! Combined flux in latest and established models = 0.55158 Jy keep ! Adding 315 model components to the UV plane model. ! The established model now contains 442 components and 0.55158 Jy ![Exited script file: muppet] wmap "J2248-3235_S_2014_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.298 x 9.534 at -1.734 degrees (North through East) ! Clean map min=-0.0032934 max=0.47652 Jy/beam ! Writing clean map to FITS file: J2248-3235_S_2014_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.476515 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000461475 device "J2248-3235_S_2014_05_31_pus\_map.eps/VPS" ! Attempting to open device: 'J2248-3235_S_2014_05_31_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.290531 0.290531 0.581063 1.16213 2.32425 4.6485 9.297 18.594 37.188 74.376 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.476 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.298 x 9.534 at -1.734 degrees (North through East) ! Clean map min=-0.0032934 max=0.47652 Jy/beam quit ! Quitting program ! Log file J2248-3235_S_2014_05_31_pus_uvs.log closed on Mon Nov 28 15:39:36 2016