! Started logfile: J2248-0541_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:37:28 2017 obs J2248-0541_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J2248-0541_S_2014_01_04_pus_uva.fits ! AN table 1: 76 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.5 visibilities/baseline/integration-bin. ! Found source: J2248-0541 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 5472 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2248-0541_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 190 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 190 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 190 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 190 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.905114Jy sigma=0.012138 ! Fit after self-cal, rms=0.874299Jy sigma=0.011714 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.051 mas, bmaj=7.031 mas, bpa=14.79 degrees ! Estimated noise=1105.14 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0961911 Jy ! Component: 100 - total flux cleaned = 0.126003 Jy ! Total flux subtracted in 100 components = 0.126003 Jy ! Clean residual min=-0.013484 max=0.020417 Jy/beam ! Clean residual mean=-0.000081 rms=0.004465 Jy/beam ! Combined flux in latest and established models = 0.126003 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.126003 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139485Jy sigma=0.001250 ! Fit after self-cal, rms=0.139674Jy sigma=0.001249 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.719 mas, bmaj=8.184 mas, bpa=14.82 degrees ! Estimated noise=809.7 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0283308 Jy ! Component: 100 - total flux cleaned = 0.0462933 Jy ! Component: 150 - total flux cleaned = 0.0588532 Jy ! Component: 200 - total flux cleaned = 0.0677454 Jy ! Total flux subtracted in 200 components = 0.0677454 Jy ! Clean residual min=-0.015106 max=0.019461 Jy/beam ! Clean residual mean=-0.000154 rms=0.005166 Jy/beam ! Combined flux in latest and established models = 0.193749 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 48 components and 0.193749 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131712Jy sigma=0.001171 ! Fit after self-cal, rms=0.131595Jy sigma=0.001169 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.00* KP 1.00* LA 0.90 ! MK 1.01 NL 0.96 OV 0.98 PT 0.96 ! SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.43 FD 1.00* KP 1.00* LA 0.91 ! MK 0.94 NL 1.01 OV 1.01 PT 0.92 ! SC 1.08 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00* KP 1.00* LA 0.72 ! MK 1.12 NL 0.79 OV 0.97 PT 0.86 ! SC 1.07 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.00* KP 1.00* LA 0.94 ! MK 1.03 NL 1.69 OV 1.03 PT 0.87 ! SC 1.00 ! ! ! Fit before self-cal, rms=0.131595Jy sigma=0.001169 ! Fit after self-cal, rms=0.125273Jy sigma=0.001080 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.776 mas, bmaj=8.34 mas, bpa=14.03 degrees ! Estimated noise=830.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00397859 Jy ! Component: 100 - total flux cleaned = 0.0048 Jy ! Component: 150 - total flux cleaned = 0.00553014 Jy ! Component: 200 - total flux cleaned = 0.00610432 Jy ! Total flux subtracted in 200 components = 0.00610432 Jy ! Clean residual min=-0.015036 max=0.016731 Jy/beam ! Clean residual mean=-0.000126 rms=0.004416 Jy/beam ! Combined flux in latest and established models = 0.199853 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 54 components and 0.199853 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124925Jy sigma=0.001078 ! Fit after self-cal, rms=0.124266Jy sigma=0.001075 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124266Jy sigma=0.001075 ! Fit after self-cal, rms=0.136943Jy sigma=0.000988 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.801 mas, bmaj=8.322 mas, bpa=13.48 degrees ! Estimated noise=842.098 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000138459 Jy ! Component: 100 - total flux cleaned = 0.000385221 Jy ! Component: 150 - total flux cleaned = 0.00062362 Jy ! Component: 200 - total flux cleaned = 0.000775243 Jy ! Total flux subtracted in 200 components = 0.000775243 Jy ! Clean residual min=-0.010403 max=0.012037 Jy/beam ! Clean residual mean=-0.000030 rms=0.002729 Jy/beam ! Combined flux in latest and established models = 0.200628 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 60 components and 0.200628 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136850Jy sigma=0.000987 ! Fit after self-cal, rms=0.137601Jy sigma=0.000985 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (21.5, 36.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00650047 Jy ! Component: 100 - total flux cleaned = 0.00723102 Jy ! Component: 150 - total flux cleaned = 0.00846585 Jy ! Component: 200 - total flux cleaned = 0.00961477 Jy ! Total flux subtracted in 200 components = 0.00961477 Jy ! Clean residual min=-0.007314 max=0.007723 Jy/beam ! Clean residual mean=-0.000025 rms=0.002039 Jy/beam ! Combined flux in latest and established models = 0.210243 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 79 components and 0.210243 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136679Jy sigma=0.000966 ! Fit after self-cal, rms=0.136582Jy sigma=0.000964 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136582Jy sigma=0.000964 ! Fit after self-cal, rms=0.136516Jy sigma=0.000961 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.782 mas, bmaj=8.34 mas, bpa=13.95 degrees ! Estimated noise=830.711 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00127064 Jy ! Component: 100 - total flux cleaned = 0.00153759 Jy ! Component: 150 - total flux cleaned = 0.00153268 Jy ! Component: 200 - total flux cleaned = 0.00126842 Jy ! Total flux subtracted in 200 components = 0.00126842 Jy ! Clean residual min=-0.006601 max=0.007078 Jy/beam ! Clean residual mean=-0.000023 rms=0.001717 Jy/beam ! Combined flux in latest and established models = 0.211512 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 88 components and 0.211512 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136201Jy sigma=0.000956 ! Fit after self-cal, rms=0.136165Jy sigma=0.000955 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000635128 Jy ! Component: 100 - total flux cleaned = -0.00088851 Jy ! Component: 150 - total flux cleaned = -0.0010321 Jy ! Component: 200 - total flux cleaned = -0.00123123 Jy ! Total flux subtracted in 200 components = -0.00123123 Jy ! Clean residual min=-0.006455 max=0.006717 Jy/beam ! Clean residual mean=-0.000023 rms=0.001650 Jy/beam ! Combined flux in latest and established models = 0.21028 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 95 components and 0.21028 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136036Jy sigma=0.000954 ! Fit after self-cal, rms=0.136002Jy sigma=0.000954 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136002Jy sigma=0.000954 ! Fit after self-cal, rms=0.136905Jy sigma=0.000953 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.216 mas, bmaj=15.11 mas, bpa=21.58 degrees ! Estimated noise=869.684 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00138493 Jy ! Component: 100 - total flux cleaned = -0.00209295 Jy ! Component: 150 - total flux cleaned = -0.00275339 Jy ! Component: 200 - total flux cleaned = -0.00300411 Jy ! Total flux subtracted in 200 components = -0.00300411 Jy ! Clean residual min=-0.006287 max=0.006955 Jy/beam ! Clean residual mean=-0.000039 rms=0.001980 Jy/beam ! Combined flux in latest and established models = 0.207276 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 114 components and 0.207276 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136839Jy sigma=0.000952 ! Fit after self-cal, rms=0.136747Jy sigma=0.000951 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000748774 Jy ! Component: 100 - total flux cleaned = -0.00119561 Jy ! Component: 150 - total flux cleaned = -0.00127233 Jy ! Component: 200 - total flux cleaned = -0.00124019 Jy ! Total flux subtracted in 200 components = -0.00124019 Jy ! Clean residual min=-0.006150 max=0.006635 Jy/beam ! Clean residual mean=-0.000040 rms=0.001934 Jy/beam ! Combined flux in latest and established models = 0.206036 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 121 components and 0.206036 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136730Jy sigma=0.000951 ! Fit after self-cal, rms=0.136716Jy sigma=0.000951 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.775 mas, bmaj=8.367 mas, bpa=14.2 degrees ! Estimated noise=828.29 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.775 x 8.367 at 14.2 degrees (North through East) ! Clean map min=-0.011588 max=0.11678 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.048 mas, bmaj=7.029 mas, bpa=13.94 degrees ! Estimated noise=1169.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.100682 Jy ! Component: 100 - total flux cleaned = 0.133631 Jy ! Component: 150 - total flux cleaned = 0.153362 Jy ! Component: 200 - total flux cleaned = 0.162638 Jy ! Total flux subtracted in 200 components = 0.162638 Jy ! Clean residual min=-0.012012 max=0.011084 Jy/beam ! Clean residual mean=-0.000032 rms=0.003013 Jy/beam ! Combined flux in latest and established models = 0.162638 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.162638 Jy ! Inverting map and beam ! Estimated beam: bmin=3.775 mas, bmaj=8.367 mas, bpa=14.2 degrees ! Estimated noise=828.29 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0135841 Jy ! Component: 100 - total flux cleaned = 0.0181855 Jy ! Component: 150 - total flux cleaned = 0.0219131 Jy ! Component: 200 - total flux cleaned = 0.0249953 Jy ! Total flux subtracted in 200 components = 0.0249953 Jy ! Clean residual min=-0.007884 max=0.008267 Jy/beam ! Clean residual mean=-0.000043 rms=0.002266 Jy/beam ! Combined flux in latest and established models = 0.187633 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 59 components and 0.187633 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.216 mas, bmaj=15.11 mas, bpa=21.58 degrees ! Estimated noise=869.684 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00533238 Jy ! Component: 100 - total flux cleaned = 0.00754063 Jy ! Component: 150 - total flux cleaned = 0.00928222 Jy ! Component: 200 - total flux cleaned = 0.0103605 Jy ! Total flux subtracted in 200 components = 0.0103605 Jy ! Clean residual min=-0.007603 max=0.007553 Jy/beam ! Clean residual mean=-0.000057 rms=0.002281 Jy/beam ! Combined flux in latest and established models = 0.197994 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000745542 Jy ! Component: 100 - total flux cleaned = 0.00136248 Jy ! Component: 150 - total flux cleaned = 0.00188311 Jy ! Component: 200 - total flux cleaned = 0.00233864 Jy ! Total flux subtracted in 200 components = 0.00233864 Jy ! Clean residual min=-0.006538 max=0.006943 Jy/beam ! Clean residual mean=-0.000052 rms=0.002069 Jy/beam ! Combined flux in latest and established models = 0.200333 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 106 components and 0.200333 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.775 mas, bmaj=8.367 mas, bpa=14.2 degrees ! Estimated noise=828.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00143868 Jy ! Component: 100 - total flux cleaned = 0.00167636 Jy ! Component: 150 - total flux cleaned = 0.00188524 Jy ! Component: 200 - total flux cleaned = 0.00206883 Jy ! Total flux subtracted in 200 components = 0.00206883 Jy ! Clean residual min=-0.006375 max=0.006722 Jy/beam ! Clean residual mean=-0.000027 rms=0.001560 Jy/beam ! Combined flux in latest and established models = 0.202401 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 120 components and 0.202401 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136741Jy sigma=0.000953 ! Fit after self-cal, rms=0.136809Jy sigma=0.000952 wmodel J2248-0541_S_2014_01_04_pus_map.mod ! Writing 120 model components to file: J2248-0541_S_2014_01_04_pus_map.mod wobs J2248-0541_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J2248-0541_S_2014_01_04_pus_uvs.fits wwins J2248-0541_S_2014_01_04_pus_map.win ! wwins: Wrote 2 windows to J2248-0541_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00118956 Jy ! Component: 100 - total flux cleaned = 0.00229733 Jy ! Component: 150 - total flux cleaned = 0.00266104 Jy ! Component: 200 - total flux cleaned = 0.00290775 Jy ! Component: 250 - total flux cleaned = 0.00291084 Jy ! Component: 300 - total flux cleaned = 0.00276558 Jy ! Component: 350 - total flux cleaned = 0.00262702 Jy ! Component: 400 - total flux cleaned = 0.00242825 Jy ! Component: 450 - total flux cleaned = 0.00236368 Jy ! Component: 500 - total flux cleaned = 0.00224188 Jy ! Component: 550 - total flux cleaned = 0.00241438 Jy ! Component: 600 - total flux cleaned = 0.00246916 Jy ! Component: 650 - total flux cleaned = 0.00262985 Jy ! Component: 700 - total flux cleaned = 0.00288927 Jy ! Component: 750 - total flux cleaned = 0.00299075 Jy ! Component: 800 - total flux cleaned = 0.0032385 Jy ! Component: 850 - total flux cleaned = 0.00343085 Jy ! Component: 900 - total flux cleaned = 0.00366492 Jy ! Component: 950 - total flux cleaned = 0.00389375 Jy ! Component: 1000 - total flux cleaned = 0.00407231 Jy ! Component: 1050 - total flux cleaned = 0.00420405 Jy ! Component: 1100 - total flux cleaned = 0.00441948 Jy ! Component: 1150 - total flux cleaned = 0.00467411 Jy ! Component: 1200 - total flux cleaned = 0.00488181 Jy ! Component: 1250 - total flux cleaned = 0.00516774 Jy ! Component: 1300 - total flux cleaned = 0.00524787 Jy ! Component: 1350 - total flux cleaned = 0.00544724 Jy ! Component: 1400 - total flux cleaned = 0.00544742 Jy ! Component: 1450 - total flux cleaned = 0.00568025 Jy ! Component: 1500 - total flux cleaned = 0.00571844 Jy ! Component: 1550 - total flux cleaned = 0.00586999 Jy ! Component: 1600 - total flux cleaned = 0.00605629 Jy ! Component: 1650 - total flux cleaned = 0.00620358 Jy ! Component: 1700 - total flux cleaned = 0.00642213 Jy ! Component: 1750 - total flux cleaned = 0.00656627 Jy ! Component: 1800 - total flux cleaned = 0.00670866 Jy ! Component: 1850 - total flux cleaned = 0.00674411 Jy ! Component: 1900 - total flux cleaned = 0.00695309 Jy ! Component: 1950 - total flux cleaned = 0.00715982 Jy ! Component: 2000 - total flux cleaned = 0.00739829 Jy ! Component: 2050 - total flux cleaned = 0.00739839 Jy ! Component: 2100 - total flux cleaned = 0.00766591 Jy ! Component: 2150 - total flux cleaned = 0.00786387 Jy ! Component: 2200 - total flux cleaned = 0.00806062 Jy ! Component: 2250 - total flux cleaned = 0.00825517 Jy ! Component: 2300 - total flux cleaned = 0.00831953 Jy ! Component: 2350 - total flux cleaned = 0.00854275 Jy ! Component: 2400 - total flux cleaned = 0.00860588 Jy ! Component: 2450 - total flux cleaned = 0.00879394 Jy ! Component: 2500 - total flux cleaned = 0.00898018 Jy ! Component: 2550 - total flux cleaned = 0.0091345 Jy ! Component: 2600 - total flux cleaned = 0.00931801 Jy ! Component: 2650 - total flux cleaned = 0.00949974 Jy ! Component: 2700 - total flux cleaned = 0.00952992 Jy ! Component: 2750 - total flux cleaned = 0.00973914 Jy ! Component: 2800 - total flux cleaned = 0.00988727 Jy ! Component: 2850 - total flux cleaned = 0.0100935 Jy ! Component: 2900 - total flux cleaned = 0.0103274 Jy ! Component: 2950 - total flux cleaned = 0.0105889 Jy ! Component: 3000 - total flux cleaned = 0.0107909 Jy ! Component: 3050 - total flux cleaned = 0.010963 Jy ! Component: 3100 - total flux cleaned = 0.0112195 Jy ! Component: 3150 - total flux cleaned = 0.0114175 Jy ! Component: 3200 - total flux cleaned = 0.0115582 Jy ! Component: 3250 - total flux cleaned = 0.0116981 Jy ! Component: 3300 - total flux cleaned = 0.0118374 Jy ! Component: 3350 - total flux cleaned = 0.0120309 Jy ! Component: 3400 - total flux cleaned = 0.0121683 Jy ! Component: 3450 - total flux cleaned = 0.0122776 Jy ! Component: 3500 - total flux cleaned = 0.0123867 Jy ! Component: 3550 - total flux cleaned = 0.0125489 Jy ! Component: 3600 - total flux cleaned = 0.0126295 Jy ! Component: 3650 - total flux cleaned = 0.0127365 Jy ! Component: 3700 - total flux cleaned = 0.0128164 Jy ! Component: 3750 - total flux cleaned = 0.0129223 Jy ! Component: 3800 - total flux cleaned = 0.0129749 Jy ! Component: 3850 - total flux cleaned = 0.0130275 Jy ! Component: 3900 - total flux cleaned = 0.0129753 Jy ! Component: 3950 - total flux cleaned = 0.0129753 Jy ! Component: 4000 - total flux cleaned = 0.0130012 Jy ! Component: 4050 - total flux cleaned = 0.0129755 Jy ! Total flux subtracted in 4096 components = 0.0129754 Jy ! Clean residual min=-0.001423 max=0.001552 Jy/beam ! Clean residual mean=-0.000013 rms=0.000460 Jy/beam ! Combined flux in latest and established models = 0.215377 Jy keep ! Adding 234 model components to the UV plane model. ! The established model now contains 354 components and 0.215377 Jy ![Exited script file: muppet] wmap "J2248-0541_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.775 x 8.367 at 14.2 degrees (North through East) ! Clean map min=-0.0096581 max=0.121 Jy/beam ! Writing clean map to FITS file: J2248-0541_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.120998 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000476534 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.18151 1.18151 2.36302 4.72604 9.45207 18.9041 37.8083 75.6166 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.12 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.775 x 8.367 at 14.2 degrees (North through East) ! Clean map min=-0.0096581 max=0.121 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2248-0541_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:37:32 2017