! Started logfile: J2247-3657_S_2014_12_20_pus_uvs.log on Wed Dec 28 13:49:34 2016
obs J2247-3657_S_2014_12_20_pus_uva.fits
! Reading UV FITS file: J2247-3657_S_2014_12_20_pus_uva.fits
! AN table 1: 15 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.253333 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J2247-3657
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23588e+09      3.2e+07          1      3.2e+07
!  02        2  2.26788e+09      3.2e+07          1      3.2e+07
!  03        3  2.29988e+09      3.2e+07          1      3.2e+07
!  04        4  2.36388e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 344 lines of history.
! 
! Reading 684 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@muppet J2247-3657_S_2014_12_20_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.515671Jy  sigma=0.004524
! Fit after  self-cal, rms=0.507019Jy  sigma=0.004455
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.973 mas, bmaj=29.54 mas, bpa=-8.495 degrees
! Estimated noise=4985.4 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.34017 Jy
! Component: 100  -  total flux cleaned = 0.471185 Jy
! Total flux subtracted in 100 components = 0.471185 Jy
! Clean residual min=-0.041197 max=0.058756 Jy/beam
! Clean residual mean=-0.001316 rms=0.017374 Jy/beam
! Combined flux in latest and established models = 0.471185 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.471185 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.166168Jy  sigma=0.001237
! Fit after  self-cal, rms=0.166006Jy  sigma=0.001236
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.41 mas, bmaj=28.49 mas, bpa=-6.387 degrees
! Estimated noise=3226.05 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0796886 Jy
! Component: 100  -  total flux cleaned = 0.0948259 Jy
! Component: 150  -  total flux cleaned = 0.0995553 Jy
! Component: 200  -  total flux cleaned = 0.100371 Jy
! Total flux subtracted in 200 components = 0.100371 Jy
! Clean residual min=-0.011696 max=0.011772 Jy/beam
! Clean residual mean=-0.000726 rms=0.006008 Jy/beam
! Combined flux in latest and established models = 0.571556 Jy
! Performing phase self-cal
! Adding 111 model components to the UV plane model.
! The established model now contains 125 components and 0.571556 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.112397Jy  sigma=0.000860
! Fit after  self-cal, rms=0.112236Jy  sigma=0.000860
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.86     HN        1.00*    KP        1.06     
!   LA        1.05     MK        1.04     NL        1.00*    OV        1.03     
!   PT        1.00     SC        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.04     HN        1.00*    KP        1.04     
!   LA        1.06     MK        0.97     NL        1.00*    OV        1.02     
!   PT        0.99     SC        1.00*    
! 
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.15     HN        1.00*    KP        0.95     
!   LA        0.80     MK        1.02     NL        1.00*    OV        0.96     
!   PT        0.98     SC        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.03     HN        1.00*    KP        0.88     
!   LA        0.89     MK        1.05     NL        1.00*    OV        1.05     
!   PT        0.99     SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.112236Jy  sigma=0.000860
! Fit after  self-cal, rms=0.086317Jy  sigma=0.000708
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.373 mas, bmaj=28.29 mas, bpa=-6.389 degrees
! Estimated noise=3243.69 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00286331 Jy
! Component: 100  -  total flux cleaned = 0.00130438 Jy
! Component: 150  -  total flux cleaned = -0.00066274 Jy
! Component: 200  -  total flux cleaned = -0.00197462 Jy
! Total flux subtracted in 200 components = -0.00197462 Jy
! Clean residual min=-0.002910 max=0.002951 Jy/beam
! Clean residual mean=-0.000079 rms=0.001156 Jy/beam
! Combined flux in latest and established models = 0.569582 Jy
! Performing phase self-cal
! Adding 49 model components to the UV plane model.
! The established model now contains 174 components and 0.569581 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084781Jy  sigma=0.000695
! Fit after  self-cal, rms=0.084727Jy  sigma=0.000695
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084727Jy  sigma=0.000695
! Fit after  self-cal, rms=0.084644Jy  sigma=0.000695
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.367 mas, bmaj=28.28 mas, bpa=-6.396 degrees
! Estimated noise=3244.51 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000465689 Jy
! Component: 100  -  total flux cleaned = -1.3633e-05 Jy
! Component: 150  -  total flux cleaned = -5.01732e-06 Jy
! Component: 200  -  total flux cleaned = -9.91227e-05 Jy
! Total flux subtracted in 200 components = -9.91227e-05 Jy
! Clean residual min=-0.001553 max=0.001560 Jy/beam
! Clean residual mean=0.000000 rms=0.000643 Jy/beam
! Combined flux in latest and established models = 0.569482 Jy
selfcal
! Performing phase self-cal
! Adding 51 model components to the UV plane model.
! The established model now contains 224 components and 0.569482 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084341Jy  sigma=0.000692
! Fit after  self-cal, rms=0.084336Jy  sigma=0.000692
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.79811e-05 Jy
! Component: 100  -  total flux cleaned = 9.25961e-05 Jy
! Component: 150  -  total flux cleaned = 0.000175626 Jy
! Component: 200  -  total flux cleaned = -6.1949e-05 Jy
! Total flux subtracted in 200 components = -6.1949e-05 Jy
! Clean residual min=-0.001302 max=0.001295 Jy/beam
! Clean residual mean=-0.000000 rms=0.000510 Jy/beam
! Combined flux in latest and established models = 0.56942 Jy
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 254 components and 0.56942 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084186Jy  sigma=0.000691
! Fit after  self-cal, rms=0.084185Jy  sigma=0.000691
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084185Jy  sigma=0.000691
! Fit after  self-cal, rms=0.084134Jy  sigma=0.000691
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.369 mas, bmaj=28.29 mas, bpa=-6.394 degrees
! Estimated noise=3244.61 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000903023 Jy
! Component: 100  -  total flux cleaned = 0.000830851 Jy
! Component: 150  -  total flux cleaned = 0.000902249 Jy
! Component: 200  -  total flux cleaned = 0.00097238 Jy
! Total flux subtracted in 200 components = 0.00097238 Jy
! Clean residual min=-0.001149 max=0.001146 Jy/beam
! Clean residual mean=-0.000000 rms=0.000442 Jy/beam
! Combined flux in latest and established models = 0.570392 Jy
selfcal
! Performing phase self-cal
! Adding 53 model components to the UV plane model.
! The established model now contains 296 components and 0.570392 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084021Jy  sigma=0.000690
! Fit after  self-cal, rms=0.084018Jy  sigma=0.000690
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000907302 Jy
! Component: 100  -  total flux cleaned = -0.000970881 Jy
! Component: 150  -  total flux cleaned = -0.00121298 Jy
! Component: 200  -  total flux cleaned = -0.00127156 Jy
! Total flux subtracted in 200 components = -0.00127156 Jy
! Clean residual min=-0.000971 max=0.000965 Jy/beam
! Clean residual mean=-0.000004 rms=0.000381 Jy/beam
! Combined flux in latest and established models = 0.569121 Jy
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 324 components and 0.569121 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083940Jy  sigma=0.000689
! Fit after  self-cal, rms=0.083938Jy  sigma=0.000689
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083938Jy  sigma=0.000689
! Fit after  self-cal, rms=0.083925Jy  sigma=0.000689
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=11.56 mas, bmaj=43.25 mas, bpa=11.51 degrees
! Estimated noise=3649.4 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000679639 Jy
! Component: 100  -  total flux cleaned = 0.00109678 Jy
! Component: 150  -  total flux cleaned = 0.00158258 Jy
! Component: 200  -  total flux cleaned = 0.00200597 Jy
! Total flux subtracted in 200 components = 0.00200597 Jy
! Clean residual min=-0.000769 max=0.000779 Jy/beam
! Clean residual mean=-0.000001 rms=0.000325 Jy/beam
! Combined flux in latest and established models = 0.571127 Jy
selfcal
! Performing phase self-cal
! Adding 53 model components to the UV plane model.
! The established model now contains 374 components and 0.571127 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083867Jy  sigma=0.000689
! Fit after  self-cal, rms=0.083866Jy  sigma=0.000689
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000352277 Jy
! Component: 100  -  total flux cleaned = 0.000826668 Jy
! Component: 150  -  total flux cleaned = 0.00124583 Jy
! Component: 200  -  total flux cleaned = 0.00173822 Jy
! Total flux subtracted in 200 components = 0.00173822 Jy
! Clean residual min=-0.000681 max=0.000675 Jy/beam
! Clean residual mean=-0.000002 rms=0.000285 Jy/beam
! Combined flux in latest and established models = 0.572865 Jy
! Performing phase self-cal
! Adding 49 model components to the UV plane model.
! The established model now contains 408 components and 0.572865 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083830Jy  sigma=0.000689
! Fit after  self-cal, rms=0.083829Jy  sigma=0.000689
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.372 mas, bmaj=28.29 mas, bpa=-6.391 degrees
! Estimated noise=3245.77 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.372 x 28.29 at -6.391 degrees (North through East)
! Clean map  min=-0.015222  max=0.45562 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3 mas, bmaj=29.98 mas, bpa=-8.43 degrees
! Estimated noise=5524.93 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.337279 Jy
! Component: 100  -  total flux cleaned = 0.463687 Jy
! Component: 150  -  total flux cleaned = 0.523496 Jy
! Component: 200  -  total flux cleaned = 0.541265 Jy
! Total flux subtracted in 200 components = 0.541265 Jy
! Clean residual min=-0.015963 max=0.016169 Jy/beam
! Clean residual mean=-0.000759 rms=0.007124 Jy/beam
! Combined flux in latest and established models = 0.541265 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 63 model components to the UV plane model.
! The established model now contains 63 components and 0.541265 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.372 mas, bmaj=28.29 mas, bpa=-6.391 degrees
! Estimated noise=3245.77 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0161345 Jy
! Component: 100  -  total flux cleaned = 0.0192868 Jy
! Component: 150  -  total flux cleaned = 0.0172283 Jy
! Component: 200  -  total flux cleaned = 0.0159323 Jy
! Total flux subtracted in 200 components = 0.0159323 Jy
! Clean residual min=-0.006149 max=0.006185 Jy/beam
! Clean residual mean=-0.000321 rms=0.003184 Jy/beam
! Combined flux in latest and established models = 0.557197 Jy
! Adding 118 model components to the UV plane model.
! The established model now contains 178 components and 0.557197 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=11.56 mas, bmaj=43.25 mas, bpa=11.51 degrees
! Estimated noise=3649.4 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00509089 Jy
! Component: 100  -  total flux cleaned = 0.00422936 Jy
! Component: 150  -  total flux cleaned = 0.00451943 Jy
! Component: 200  -  total flux cleaned = 0.00406397 Jy
! Total flux subtracted in 200 components = 0.00406397 Jy
! Clean residual min=-0.003533 max=0.003554 Jy/beam
! Clean residual mean=-0.000160 rms=0.001864 Jy/beam
! Combined flux in latest and established models = 0.561261 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000208377 Jy
! Component: 100  -  total flux cleaned = -0.000591215 Jy
! Component: 150  -  total flux cleaned = -0.000591364 Jy
! Component: 200  -  total flux cleaned = -0.000414452 Jy
! Total flux subtracted in 200 components = -0.000414452 Jy
! Clean residual min=-0.002922 max=0.002917 Jy/beam
! Clean residual mean=-0.000068 rms=0.001179 Jy/beam
! Combined flux in latest and established models = 0.560846 Jy
! Adding 127 model components to the UV plane model.
! The established model now contains 305 components and 0.560846 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.372 mas, bmaj=28.29 mas, bpa=-6.391 degrees
! Estimated noise=3245.77 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00164396 Jy
! Component: 100  -  total flux cleaned = 0.00124453 Jy
! Component: 150  -  total flux cleaned = 0.00113243 Jy
! Component: 200  -  total flux cleaned = 0.00084234 Jy
! Total flux subtracted in 200 components = 0.00084234 Jy
! Clean residual min=-0.001615 max=0.001603 Jy/beam
! Clean residual mean=-0.000023 rms=0.000668 Jy/beam
! Combined flux in latest and established models = 0.561689 Jy
selfcal
! Performing phase self-cal
! Adding 48 model components to the UV plane model.
! The established model now contains 353 components and 0.561689 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083999Jy  sigma=0.000690
! Fit after  self-cal, rms=0.083995Jy  sigma=0.000690
wmodel J2247-3657_S_2014_12_20_pus_map.mod
! Writing 353 model components to file: J2247-3657_S_2014_12_20_pus_map.mod
wobs J2247-3657_S_2014_12_20_pus_uvs.fits
! Writing UV FITS file: J2247-3657_S_2014_12_20_pus_uvs.fits
wwins J2247-3657_S_2014_12_20_pus_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: muppet]
! 
wmap "J2247-3657_S_2014_12_20_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.372 x 28.29 at -6.391 degrees (North through East)
! Clean map  min=-0.0061794  max=0.43098 Jy/beam
! Writing clean map to FITS file: J2247-3657_S_2014_12_20_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.430977 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000646 
device "J2247-3657_S_2014_12_20_pus\_map.eps/VPS"
! Attempting to open device: 'J2247-3657_S_2014_12_20_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.449676 0.449676 0.899353 1.79871 3.59741 7.19482 14.3896 28.7793 57.5586
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0019 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.43 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.372 x 28.29 at -6.391 degrees (North through East)
! Clean map  min=-0.0061794  max=0.43098 Jy/beam
quit
! Quitting program
! Log file J2247-3657_S_2014_12_20_pus_uvs.log closed on Wed Dec 28 13:49:37 2016