! Started logfile: J2247+0000_S_2015_01_23_pus_uvs.log on Mon Jan 2 19:37:14 2017 obs J2247+0000_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J2247+0000_S_2015_01_23_pus_uva.fits ! AN table 1: 56 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.963492 visibilities/baseline/integration-bin. ! Found source: J2247+0000 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 9712 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2247+0000_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.696198Jy sigma=0.006555 ! Fit after self-cal, rms=0.635707Jy sigma=0.005807 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.788 mas, bmaj=6.541 mas, bpa=-2.786 degrees ! Estimated noise=917.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.335295 Jy ! Component: 100 - total flux cleaned = 0.427087 Jy ! Total flux subtracted in 100 components = 0.427087 Jy ! Clean residual min=-0.029955 max=0.040060 Jy/beam ! Clean residual mean=-0.000004 rms=0.008307 Jy/beam ! Combined flux in latest and established models = 0.427087 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.427087 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.220677Jy sigma=0.001715 ! Fit after self-cal, rms=0.220545Jy sigma=0.001713 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.287 mas, bmaj=7.399 mas, bpa=-2.84 degrees ! Estimated noise=745.713 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0436714 Jy ! Component: 100 - total flux cleaned = 0.0624546 Jy ! Component: 150 - total flux cleaned = 0.0710144 Jy ! Component: 200 - total flux cleaned = 0.0722848 Jy ! Total flux subtracted in 200 components = 0.0722848 Jy ! Clean residual min=-0.025387 max=0.040329 Jy/beam ! Clean residual mean=-0.000015 rms=0.009189 Jy/beam ! Combined flux in latest and established models = 0.499372 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 22 components and 0.499372 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.222857Jy sigma=0.001554 ! Fit after self-cal, rms=0.222786Jy sigma=0.001552 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 3.09 HN 0.92 KP 0.98 ! LA 1.30 MK 1.00 NL 1.08 OV 0.89 ! PT 0.90 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 3.49 HN 0.97 KP 0.91 ! LA 1.27 MK 1.01 NL 1.24 OV 0.91 ! PT 0.90 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.84 FD 3.82 HN 0.97 KP 0.79 ! LA 1.04 MK 1.03 NL 1.30 OV 0.84 ! PT 0.88 SC 1.05 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 3.26 HN 0.93 KP 0.74 ! LA 1.12 MK 1.02 NL 0.94 OV 0.90 ! PT 0.92 SC 0.99 ! ! ! Fit before self-cal, rms=0.222786Jy sigma=0.001552 ! Fit after self-cal, rms=0.403620Jy sigma=0.001107 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.287 mas, bmaj=7.376 mas, bpa=-2.668 degrees ! Estimated noise=745.496 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00529717 Jy ! Component: 100 - total flux cleaned = 0.0059725 Jy ! Component: 150 - total flux cleaned = 0.00616566 Jy ! Component: 200 - total flux cleaned = 0.00634419 Jy ! Total flux subtracted in 200 components = 0.00634419 Jy ! Clean residual min=-0.018548 max=0.017411 Jy/beam ! Clean residual mean=0.000021 rms=0.005211 Jy/beam ! Combined flux in latest and established models = 0.505716 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 29 components and 0.505716 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.403482Jy sigma=0.001105 ! Fit after self-cal, rms=0.404422Jy sigma=0.001104 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.404422Jy sigma=0.001104 ! Fit after self-cal, rms=0.370325Jy sigma=0.000782 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.277 mas, bmaj=7.369 mas, bpa=-2.801 degrees ! Estimated noise=744.164 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00205932 Jy ! Component: 100 - total flux cleaned = 0.00168796 Jy ! Component: 150 - total flux cleaned = 0.00156516 Jy ! Component: 200 - total flux cleaned = 0.00156913 Jy ! Total flux subtracted in 200 components = 0.00156913 Jy ! Clean residual min=-0.002524 max=0.003223 Jy/beam ! Clean residual mean=0.000003 rms=0.000661 Jy/beam ! Combined flux in latest and established models = 0.507286 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 35 components and 0.507286 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.370285Jy sigma=0.000780 ! Fit after self-cal, rms=0.371283Jy sigma=0.000780 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (17.5, 6.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00192807 Jy ! Component: 100 - total flux cleaned = 0.00226646 Jy ! Component: 150 - total flux cleaned = 0.00232134 Jy ! Component: 200 - total flux cleaned = 0.00236479 Jy ! Total flux subtracted in 200 components = 0.00236479 Jy ! Clean residual min=-0.002358 max=0.002603 Jy/beam ! Clean residual mean=-0.000001 rms=0.000609 Jy/beam ! Combined flux in latest and established models = 0.50965 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 53 components and 0.50965 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.371252Jy sigma=0.000779 ! Fit after self-cal, rms=0.371265Jy sigma=0.000778 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.371265Jy sigma=0.000778 ! Fit after self-cal, rms=0.371984Jy sigma=0.000778 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.272 mas, bmaj=7.361 mas, bpa=-2.771 degrees ! Estimated noise=743.652 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00110435 Jy ! Component: 100 - total flux cleaned = 0.00110569 Jy ! Component: 150 - total flux cleaned = 0.00114389 Jy ! Component: 200 - total flux cleaned = 0.00111108 Jy ! Total flux subtracted in 200 components = 0.00111108 Jy ! Clean residual min=-0.002206 max=0.002447 Jy/beam ! Clean residual mean=-0.000001 rms=0.000583 Jy/beam ! Combined flux in latest and established models = 0.510762 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 64 components and 0.510761 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.371970Jy sigma=0.000778 ! Fit after self-cal, rms=0.371970Jy sigma=0.000778 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00229942 Jy ! Component: 100 - total flux cleaned = 0.00343778 Jy ! Component: 150 - total flux cleaned = 0.00393793 Jy ! Component: 200 - total flux cleaned = 0.0041588 Jy ! Total flux subtracted in 200 components = 0.0041588 Jy ! Clean residual min=-0.001960 max=0.002033 Jy/beam ! Clean residual mean=-0.000003 rms=0.000540 Jy/beam ! Combined flux in latest and established models = 0.51492 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 91 components and 0.51492 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.371940Jy sigma=0.000777 ! Fit after self-cal, rms=0.371943Jy sigma=0.000777 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.371943Jy sigma=0.000777 ! Fit after self-cal, rms=0.372910Jy sigma=0.000777 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.072 mas, bmaj=11.64 mas, bpa=-5.123 degrees ! Estimated noise=981.583 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00169496 Jy ! Component: 100 - total flux cleaned = 0.0019275 Jy ! Component: 150 - total flux cleaned = 0.00205554 Jy ! Component: 200 - total flux cleaned = 0.00205572 Jy ! Total flux subtracted in 200 components = 0.00205572 Jy ! Clean residual min=-0.002178 max=0.002716 Jy/beam ! Clean residual mean=-0.000005 rms=0.000668 Jy/beam ! Combined flux in latest and established models = 0.516976 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 122 components and 0.516976 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.372900Jy sigma=0.000777 ! Fit after self-cal, rms=0.372895Jy sigma=0.000777 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000247311 Jy ! Component: 100 - total flux cleaned = 0.000168201 Jy ! Component: 150 - total flux cleaned = 7.82582e-05 Jy ! Component: 200 - total flux cleaned = 1.9477e-05 Jy ! Total flux subtracted in 200 components = 1.9477e-05 Jy ! Clean residual min=-0.002190 max=0.002728 Jy/beam ! Clean residual mean=-0.000005 rms=0.000660 Jy/beam ! Combined flux in latest and established models = 0.516996 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 135 components and 0.516996 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.372885Jy sigma=0.000777 ! Fit after self-cal, rms=0.372887Jy sigma=0.000777 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.269 mas, bmaj=7.355 mas, bpa=-2.751 degrees ! Estimated noise=743.699 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.269 x 7.355 at -2.751 degrees (North through East) ! Clean map min=-0.001832 max=0.43489 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.787 mas, bmaj=6.537 mas, bpa=-2.52 degrees ! Estimated noise=902.665 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.329715 Jy ! Component: 100 - total flux cleaned = 0.422271 Jy ! Component: 150 - total flux cleaned = 0.463996 Jy ! Component: 200 - total flux cleaned = 0.485798 Jy ! Total flux subtracted in 200 components = 0.485798 Jy ! Clean residual min=-0.005104 max=0.010414 Jy/beam ! Clean residual mean=0.000006 rms=0.001364 Jy/beam ! Combined flux in latest and established models = 0.485798 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.485798 Jy ! Inverting map and beam ! Estimated beam: bmin=3.269 mas, bmaj=7.355 mas, bpa=-2.751 degrees ! Estimated noise=743.699 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0133031 Jy ! Component: 100 - total flux cleaned = 0.0197992 Jy ! Component: 150 - total flux cleaned = 0.0237148 Jy ! Component: 200 - total flux cleaned = 0.0262346 Jy ! Total flux subtracted in 200 components = 0.0262346 Jy ! Clean residual min=-0.002357 max=0.002377 Jy/beam ! Clean residual mean=0.000000 rms=0.000615 Jy/beam ! Combined flux in latest and established models = 0.512032 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 36 components and 0.512032 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.072 mas, bmaj=11.64 mas, bpa=-5.123 degrees ! Estimated noise=981.583 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00284175 Jy ! Component: 100 - total flux cleaned = 0.00372805 Jy ! Component: 150 - total flux cleaned = 0.00406684 Jy ! Component: 200 - total flux cleaned = 0.00430826 Jy ! Total flux subtracted in 200 components = 0.00430826 Jy ! Clean residual min=-0.002237 max=0.002711 Jy/beam ! Clean residual mean=-0.000004 rms=0.000688 Jy/beam ! Combined flux in latest and established models = 0.51634 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000143901 Jy ! Component: 100 - total flux cleaned = 0.000209955 Jy ! Component: 150 - total flux cleaned = 0.000329849 Jy ! Component: 200 - total flux cleaned = 0.000385001 Jy ! Total flux subtracted in 200 components = 0.000385001 Jy ! Clean residual min=-0.002217 max=0.002740 Jy/beam ! Clean residual mean=-0.000005 rms=0.000672 Jy/beam ! Combined flux in latest and established models = 0.516725 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 71 components and 0.516725 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.269 mas, bmaj=7.355 mas, bpa=-2.751 degrees ! Estimated noise=743.699 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000710585 Jy ! Component: 100 - total flux cleaned = -0.000887475 Jy ! Component: 150 - total flux cleaned = -0.000742633 Jy ! Component: 200 - total flux cleaned = -0.000743043 Jy ! Total flux subtracted in 200 components = -0.000743043 Jy ! Clean residual min=-0.001968 max=0.002101 Jy/beam ! Clean residual mean=-0.000002 rms=0.000521 Jy/beam ! Combined flux in latest and established models = 0.515982 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 93 components and 0.515982 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.372920Jy sigma=0.000777 ! Fit after self-cal, rms=0.372918Jy sigma=0.000777 wmodel J2247+0000_S_2015_01_23_pus_map.mod ! Writing 93 model components to file: J2247+0000_S_2015_01_23_pus_map.mod wobs J2247+0000_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J2247+0000_S_2015_01_23_pus_uvs.fits wwins J2247+0000_S_2015_01_23_pus_map.win ! wwins: Wrote 3 windows to J2247+0000_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000208039 Jy ! Component: 100 - total flux cleaned = 0.000172425 Jy ! Component: 150 - total flux cleaned = 0.000172978 Jy ! Component: 200 - total flux cleaned = 0.000205095 Jy ! Component: 250 - total flux cleaned = 0.000299385 Jy ! Component: 300 - total flux cleaned = 0.000330251 Jy ! Component: 350 - total flux cleaned = 0.00030059 Jy ! Component: 400 - total flux cleaned = 0.000242537 Jy ! Component: 450 - total flux cleaned = 0.000242355 Jy ! Component: 500 - total flux cleaned = 0.000214147 Jy ! Component: 550 - total flux cleaned = 0.000241505 Jy ! Component: 600 - total flux cleaned = 0.000186859 Jy ! Component: 650 - total flux cleaned = 0.000160442 Jy ! Component: 700 - total flux cleaned = 0.000213702 Jy ! Component: 750 - total flux cleaned = 0.000214279 Jy ! Component: 800 - total flux cleaned = 0.00021433 Jy ! Component: 850 - total flux cleaned = 0.000113824 Jy ! Component: 900 - total flux cleaned = 0.000188296 Jy ! Component: 950 - total flux cleaned = 0.000163673 Jy ! Component: 1000 - total flux cleaned = 0.000211476 Jy ! Component: 1050 - total flux cleaned = 0.000187143 Jy ! Component: 1100 - total flux cleaned = 0.000116331 Jy ! Component: 1150 - total flux cleaned = 0.000163579 Jy ! Component: 1200 - total flux cleaned = 0.000163769 Jy ! Component: 1250 - total flux cleaned = 0.000186676 Jy ! Component: 1300 - total flux cleaned = 0.000186523 Jy ! Component: 1350 - total flux cleaned = 0.000141438 Jy ! Component: 1400 - total flux cleaned = 0.000163322 Jy ! Component: 1450 - total flux cleaned = 0.00011934 Jy ! Component: 1500 - total flux cleaned = 0.000119126 Jy ! Component: 1550 - total flux cleaned = 9.74572e-05 Jy ! Component: 1600 - total flux cleaned = 0.000161795 Jy ! Component: 1650 - total flux cleaned = 0.000182882 Jy ! Component: 1700 - total flux cleaned = 3.57735e-05 Jy ! Component: 1750 - total flux cleaned = 9.83602e-05 Jy ! Component: 1800 - total flux cleaned = 9.82164e-05 Jy ! Component: 1850 - total flux cleaned = 0.000118443 Jy ! Component: 1900 - total flux cleaned = 0.000118455 Jy ! Component: 1950 - total flux cleaned = 5.83699e-05 Jy ! Component: 2000 - total flux cleaned = 3.84049e-05 Jy ! Component: 2050 - total flux cleaned = -1.14083e-06 Jy ! Component: 2100 - total flux cleaned = -0.000118594 Jy ! Component: 2150 - total flux cleaned = -9.8657e-05 Jy ! Component: 2200 - total flux cleaned = -9.85494e-05 Jy ! Component: 2250 - total flux cleaned = -0.000136961 Jy ! Component: 2300 - total flux cleaned = -0.000174833 Jy ! Component: 2350 - total flux cleaned = -0.000231492 Jy ! Component: 2400 - total flux cleaned = -0.00021265 Jy ! Component: 2450 - total flux cleaned = -0.00026838 Jy ! Component: 2500 - total flux cleaned = -0.000323817 Jy ! Component: 2550 - total flux cleaned = -0.000323777 Jy ! Component: 2600 - total flux cleaned = -0.000396716 Jy ! Component: 2650 - total flux cleaned = -0.000414551 Jy ! Component: 2700 - total flux cleaned = -0.000360653 Jy ! Component: 2750 - total flux cleaned = -0.000342861 Jy ! Component: 2800 - total flux cleaned = -0.000431463 Jy ! Component: 2850 - total flux cleaned = -0.000449069 Jy ! Component: 2900 - total flux cleaned = -0.000466457 Jy ! Component: 2950 - total flux cleaned = -0.000518616 Jy ! Component: 3000 - total flux cleaned = -0.000518577 Jy ! Component: 3050 - total flux cleaned = -0.000535692 Jy ! Component: 3100 - total flux cleaned = -0.000552533 Jy ! Component: 3150 - total flux cleaned = -0.000501449 Jy ! Component: 3200 - total flux cleaned = -0.000484602 Jy ! Component: 3250 - total flux cleaned = -0.000535046 Jy ! Component: 3300 - total flux cleaned = -0.00051839 Jy ! Component: 3350 - total flux cleaned = -0.000551767 Jy ! Component: 3400 - total flux cleaned = -0.000584729 Jy ! Component: 3450 - total flux cleaned = -0.000601055 Jy ! Component: 3500 - total flux cleaned = -0.000584844 Jy ! Component: 3550 - total flux cleaned = -0.000666106 Jy ! Component: 3600 - total flux cleaned = -0.000601463 Jy ! Component: 3650 - total flux cleaned = -0.000633688 Jy ! Component: 3700 - total flux cleaned = -0.000665581 Jy ! Component: 3750 - total flux cleaned = -0.000681322 Jy ! Component: 3800 - total flux cleaned = -0.00069716 Jy ! Component: 3850 - total flux cleaned = -0.000712883 Jy ! Component: 3900 - total flux cleaned = -0.00065009 Jy ! Component: 3950 - total flux cleaned = -0.000696845 Jy ! Component: 4000 - total flux cleaned = -0.000665814 Jy ! Component: 4050 - total flux cleaned = -0.000650554 Jy ! Total flux subtracted in 4096 components = -0.000650503 Jy ! Clean residual min=-0.000828 max=0.000821 Jy/beam ! Clean residual mean=-0.000003 rms=0.000291 Jy/beam ! Combined flux in latest and established models = 0.515332 Jy keep ! Adding 315 model components to the UV plane model. ! The established model now contains 408 components and 0.515332 Jy ![Exited script file: muppet] wmap "J2247+0000_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.269 x 7.355 at -2.751 degrees (North through East) ! Clean map min=-0.0016543 max=0.4351 Jy/beam ! Writing clean map to FITS file: J2247+0000_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.435096 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00028887 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.199176 0.199176 0.398353 0.796705 1.59341 3.18682 6.37364 12.7473 25.4946 50.9891 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.435 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.269 x 7.355 at -2.751 degrees (North through East) ! Clean map min=-0.0016543 max=0.4351 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2247+0000_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 19:37:18 2017