! Started logfile: J2245-0755_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:37:19 2017 obs J2245-0755_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J2245-0755_S_2014_01_04_pus_uva.fits ! AN table 1: 86 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.49031 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2245-0755 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 6072 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2245-0755_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 220 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 220 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 220 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 220 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.926181Jy sigma=0.014052 ! Fit after self-cal, rms=0.902719Jy sigma=0.013840 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.111 mas, bmaj=7.383 mas, bpa=16.23 degrees ! Estimated noise=915.858 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0755387 Jy ! Component: 100 - total flux cleaned = 0.0925058 Jy ! Total flux subtracted in 100 components = 0.0925058 Jy ! Clean residual min=-0.009640 max=0.012533 Jy/beam ! Clean residual mean=-0.000009 rms=0.003014 Jy/beam ! Combined flux in latest and established models = 0.0925058 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0925058 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106794Jy sigma=0.001058 ! Fit after self-cal, rms=0.106723Jy sigma=0.001057 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.755 mas, bmaj=8.577 mas, bpa=14.45 degrees ! Estimated noise=722.143 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00749581 Jy ! Component: 100 - total flux cleaned = 0.0123741 Jy ! Component: 150 - total flux cleaned = 0.0156638 Jy ! Component: 200 - total flux cleaned = 0.0172653 Jy ! Total flux subtracted in 200 components = 0.0172653 Jy ! Clean residual min=-0.009807 max=0.013467 Jy/beam ! Clean residual mean=-0.000007 rms=0.003345 Jy/beam ! Combined flux in latest and established models = 0.109771 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 18 components and 0.109771 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105640Jy sigma=0.001070 ! Fit after self-cal, rms=0.105449Jy sigma=0.001070 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.37 FD 1.00* KP 1.00* LA 0.99 ! MK 0.97 NL 0.94 OV 0.96 PT 0.96 ! SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 2.04 FD 1.00* KP 1.00* LA 0.94 ! MK 0.90 NL 1.01 OV 1.00 PT 0.97 ! SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.00* KP 1.00* LA 0.78 ! MK 1.07 NL 0.93 OV 0.87 PT 0.98 ! SC 0.95 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* KP 1.00* LA 0.86 ! MK 1.02 NL 0.96 OV 0.94 PT 0.99 ! SC 0.94 ! ! ! Fit before self-cal, rms=0.105449Jy sigma=0.001070 ! Fit after self-cal, rms=0.120502Jy sigma=0.000962 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.732 mas, bmaj=8.566 mas, bpa=13.01 degrees ! Estimated noise=757.913 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00313046 Jy ! Component: 100 - total flux cleaned = 0.00286043 Jy ! Component: 150 - total flux cleaned = 0.00252093 Jy ! Component: 200 - total flux cleaned = 0.00242027 Jy ! Total flux subtracted in 200 components = 0.00242027 Jy ! Clean residual min=-0.009771 max=0.007515 Jy/beam ! Clean residual mean=-0.000003 rms=0.002107 Jy/beam ! Combined flux in latest and established models = 0.112191 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 25 components and 0.112191 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119825Jy sigma=0.000962 ! Fit after self-cal, rms=0.119928Jy sigma=0.000959 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119928Jy sigma=0.000959 ! Fit after self-cal, rms=0.106544Jy sigma=0.000913 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.754 mas, bmaj=8.504 mas, bpa=12.63 degrees ! Estimated noise=752.575 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00159871 Jy ! Component: 100 - total flux cleaned = 0.00203579 Jy ! Component: 150 - total flux cleaned = 0.00213583 Jy ! Component: 200 - total flux cleaned = 0.00219829 Jy ! Total flux subtracted in 200 components = 0.00219829 Jy ! Clean residual min=-0.003358 max=0.002736 Jy/beam ! Clean residual mean=0.000001 rms=0.000717 Jy/beam ! Combined flux in latest and established models = 0.11439 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 35 components and 0.11439 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106479Jy sigma=0.000913 ! Fit after self-cal, rms=0.106846Jy sigma=0.000910 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000415554 Jy ! Component: 100 - total flux cleaned = 0.000499598 Jy ! Component: 150 - total flux cleaned = 0.000538353 Jy ! Component: 200 - total flux cleaned = 0.000575523 Jy ! Total flux subtracted in 200 components = 0.000575523 Jy ! Clean residual min=-0.004127 max=0.003168 Jy/beam ! Clean residual mean=0.000001 rms=0.000785 Jy/beam ! Combined flux in latest and established models = 0.114965 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 40 components and 0.114965 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106779Jy sigma=0.000909 ! Fit after self-cal, rms=0.106839Jy sigma=0.000909 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106839Jy sigma=0.000909 ! Fit after self-cal, rms=0.105564Jy sigma=0.000909 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.743 mas, bmaj=8.492 mas, bpa=12.97 degrees ! Estimated noise=756.433 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00161399 Jy ! Component: 100 - total flux cleaned = 0.00194375 Jy ! Component: 150 - total flux cleaned = 0.00201368 Jy ! Component: 200 - total flux cleaned = 0.00201362 Jy ! Total flux subtracted in 200 components = 0.00201362 Jy ! Clean residual min=-0.003723 max=0.003111 Jy/beam ! Clean residual mean=0.000000 rms=0.000773 Jy/beam ! Combined flux in latest and established models = 0.116979 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 45 components and 0.116979 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105474Jy sigma=0.000909 ! Fit after self-cal, rms=0.105640Jy sigma=0.000909 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.13133e-05 Jy ! Component: 100 - total flux cleaned = 4.65567e-05 Jy ! Component: 150 - total flux cleaned = 4.75405e-05 Jy ! Component: 200 - total flux cleaned = 7.99162e-05 Jy ! Total flux subtracted in 200 components = 7.99162e-05 Jy ! Clean residual min=-0.003925 max=0.003206 Jy/beam ! Clean residual mean=0.000000 rms=0.000792 Jy/beam ! Combined flux in latest and established models = 0.117059 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 45 components and 0.117059 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105583Jy sigma=0.000909 ! Fit after self-cal, rms=0.105632Jy sigma=0.000909 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105632Jy sigma=0.000909 ! Fit after self-cal, rms=0.104848Jy sigma=0.000908 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.76 mas, bmaj=14.67 mas, bpa=14.54 degrees ! Estimated noise=839.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00100808 Jy ! Component: 100 - total flux cleaned = 0.00101055 Jy ! Component: 150 - total flux cleaned = 0.00101158 Jy ! Component: 200 - total flux cleaned = 0.000960026 Jy ! Total flux subtracted in 200 components = 0.000960026 Jy ! Clean residual min=-0.003329 max=0.002942 Jy/beam ! Clean residual mean=-0.000001 rms=0.000877 Jy/beam ! Combined flux in latest and established models = 0.118019 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 52 components and 0.118019 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104819Jy sigma=0.000909 ! Fit after self-cal, rms=0.104883Jy sigma=0.000908 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.87813e-05 Jy ! Component: 100 - total flux cleaned = -0.000132151 Jy ! Component: 150 - total flux cleaned = -0.000180122 Jy ! Component: 200 - total flux cleaned = -0.000226725 Jy ! Total flux subtracted in 200 components = -0.000226725 Jy ! Clean residual min=-0.003298 max=0.002888 Jy/beam ! Clean residual mean=-0.000001 rms=0.000868 Jy/beam ! Combined flux in latest and established models = 0.117792 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 52 components and 0.117792 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104870Jy sigma=0.000909 ! Fit after self-cal, rms=0.104882Jy sigma=0.000909 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.731 mas, bmaj=8.486 mas, bpa=13.25 degrees ! Estimated noise=760.285 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.731 x 8.486 at 13.25 degrees (North through East) ! Clean map min=-0.0033344 max=0.097462 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.127 mas, bmaj=7.301 mas, bpa=15.06 degrees ! Estimated noise=952.591 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0789084 Jy ! Component: 100 - total flux cleaned = 0.096485 Jy ! Component: 150 - total flux cleaned = 0.103762 Jy ! Component: 200 - total flux cleaned = 0.108615 Jy ! Total flux subtracted in 200 components = 0.108615 Jy ! Clean residual min=-0.005159 max=0.003960 Jy/beam ! Clean residual mean=0.000000 rms=0.001156 Jy/beam ! Combined flux in latest and established models = 0.108615 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.108615 Jy ! Inverting map and beam ! Estimated beam: bmin=3.731 mas, bmaj=8.486 mas, bpa=13.25 degrees ! Estimated noise=760.285 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00378397 Jy ! Component: 100 - total flux cleaned = 0.00602102 Jy ! Component: 150 - total flux cleaned = 0.0070746 Jy ! Component: 200 - total flux cleaned = 0.00729834 Jy ! Total flux subtracted in 200 components = 0.00729834 Jy ! Clean residual min=-0.003484 max=0.003219 Jy/beam ! Clean residual mean=0.000000 rms=0.000787 Jy/beam ! Combined flux in latest and established models = 0.115914 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 29 components and 0.115914 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.76 mas, bmaj=14.67 mas, bpa=14.54 degrees ! Estimated noise=839.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.41636e-05 Jy ! Component: 100 - total flux cleaned = 0.00011292 Jy ! Component: 150 - total flux cleaned = 0.000146004 Jy ! Component: 200 - total flux cleaned = 0.00015935 Jy ! Total flux subtracted in 200 components = 0.00015935 Jy ! Clean residual min=-0.003286 max=0.002919 Jy/beam ! Clean residual mean=-0.000000 rms=0.000818 Jy/beam ! Combined flux in latest and established models = 0.116073 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.92938e-07 Jy ! Component: 100 - total flux cleaned = 1.22059e-05 Jy ! Component: 150 - total flux cleaned = 2.30854e-05 Jy ! Component: 200 - total flux cleaned = 2.27305e-05 Jy ! Total flux subtracted in 200 components = 2.27305e-05 Jy ! Clean residual min=-0.003275 max=0.002906 Jy/beam ! Clean residual mean=-0.000000 rms=0.000815 Jy/beam ! Combined flux in latest and established models = 0.116096 Jy ! Adding 7 model components to the UV plane model. ! The established model now contains 35 components and 0.116096 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.731 mas, bmaj=8.486 mas, bpa=13.25 degrees ! Estimated noise=760.285 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000156897 Jy ! Component: 100 - total flux cleaned = -2.70336e-06 Jy ! Component: 150 - total flux cleaned = 6.34962e-05 Jy ! Component: 200 - total flux cleaned = 0.000156247 Jy ! Total flux subtracted in 200 components = 0.000156247 Jy ! Clean residual min=-0.003421 max=0.003188 Jy/beam ! Clean residual mean=0.000000 rms=0.000779 Jy/beam ! Combined flux in latest and established models = 0.116252 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 42 components and 0.116252 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104863Jy sigma=0.000909 ! Fit after self-cal, rms=0.104934Jy sigma=0.000908 wmodel J2245-0755_S_2014_01_04_pus_map.mod ! Writing 42 model components to file: J2245-0755_S_2014_01_04_pus_map.mod wobs J2245-0755_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J2245-0755_S_2014_01_04_pus_uvs.fits wwins J2245-0755_S_2014_01_04_pus_map.win ! wwins: Wrote 1 windows to J2245-0755_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000649149 Jy ! Component: 100 - total flux cleaned = -0.00081527 Jy ! Component: 150 - total flux cleaned = -0.000967142 Jy ! Component: 200 - total flux cleaned = -0.00106142 Jy ! Component: 250 - total flux cleaned = -0.00101702 Jy ! Component: 300 - total flux cleaned = -0.000932119 Jy ! Component: 350 - total flux cleaned = -0.000892244 Jy ! Component: 400 - total flux cleaned = -0.000932773 Jy ! Component: 450 - total flux cleaned = -0.00100951 Jy ! Component: 500 - total flux cleaned = -0.000971935 Jy ! Component: 550 - total flux cleaned = -0.000863761 Jy ! Component: 600 - total flux cleaned = -0.000793606 Jy ! Component: 650 - total flux cleaned = -0.000725229 Jy ! Component: 700 - total flux cleaned = -0.000691629 Jy ! Component: 750 - total flux cleaned = -0.000626084 Jy ! Component: 800 - total flux cleaned = -0.000497589 Jy ! Component: 850 - total flux cleaned = -0.000215792 Jy ! Component: 900 - total flux cleaned = 2.99762e-05 Jy ! Component: 950 - total flux cleaned = 0.000211109 Jy ! Component: 1000 - total flux cleaned = 0.000477908 Jy ! Component: 1050 - total flux cleaned = 0.000623457 Jy ! Component: 1100 - total flux cleaned = 0.000852184 Jy ! Component: 1150 - total flux cleaned = 0.000964874 Jy ! Component: 1200 - total flux cleaned = 0.00113102 Jy ! Component: 1250 - total flux cleaned = 0.00121245 Jy ! Component: 1300 - total flux cleaned = 0.00131957 Jy ! Component: 1350 - total flux cleaned = 0.00137236 Jy ! Component: 1400 - total flux cleaned = 0.00145073 Jy ! Component: 1450 - total flux cleaned = 0.00155342 Jy ! Component: 1500 - total flux cleaned = 0.00160402 Jy ! Component: 1550 - total flux cleaned = 0.00160382 Jy ! Component: 1600 - total flux cleaned = 0.00165328 Jy ! Component: 1650 - total flux cleaned = 0.0016291 Jy ! Component: 1700 - total flux cleaned = 0.00167741 Jy ! Component: 1750 - total flux cleaned = 0.00170141 Jy ! Component: 1800 - total flux cleaned = 0.00170156 Jy ! Component: 1850 - total flux cleaned = 0.00172519 Jy ! Component: 1900 - total flux cleaned = 0.00170252 Jy ! Component: 1950 - total flux cleaned = 0.00177066 Jy ! Component: 2000 - total flux cleaned = 0.00174824 Jy ! Component: 2050 - total flux cleaned = 0.00174837 Jy ! Component: 2100 - total flux cleaned = 0.0017922 Jy ! Component: 2150 - total flux cleaned = 0.00181363 Jy ! Component: 2200 - total flux cleaned = 0.00183495 Jy ! Component: 2250 - total flux cleaned = 0.00183482 Jy ! Component: 2300 - total flux cleaned = 0.00187679 Jy ! Component: 2350 - total flux cleaned = 0.00185583 Jy ! Component: 2400 - total flux cleaned = 0.00189716 Jy ! Component: 2450 - total flux cleaned = 0.00191776 Jy ! Component: 2500 - total flux cleaned = 0.00193795 Jy ! Component: 2550 - total flux cleaned = 0.00197783 Jy ! Component: 2600 - total flux cleaned = 0.00197809 Jy ! Component: 2650 - total flux cleaned = 0.0020368 Jy ! Component: 2700 - total flux cleaned = 0.00203681 Jy ! Component: 2750 - total flux cleaned = 0.00209442 Jy ! Component: 2800 - total flux cleaned = 0.00211349 Jy ! Component: 2850 - total flux cleaned = 0.00215108 Jy ! Component: 2900 - total flux cleaned = 0.00218846 Jy ! Component: 2950 - total flux cleaned = 0.0022069 Jy ! Component: 3000 - total flux cleaned = 0.00222518 Jy ! Component: 3050 - total flux cleaned = 0.0022797 Jy ! Component: 3100 - total flux cleaned = 0.00231565 Jy ! Component: 3150 - total flux cleaned = 0.00229775 Jy ! Component: 3200 - total flux cleaned = 0.00231562 Jy ! Component: 3250 - total flux cleaned = 0.00236837 Jy ! Component: 3300 - total flux cleaned = 0.00236844 Jy ! Component: 3350 - total flux cleaned = 0.00235106 Jy ! Component: 3400 - total flux cleaned = 0.0023681 Jy ! Component: 3450 - total flux cleaned = 0.00238506 Jy ! Component: 3500 - total flux cleaned = 0.00235121 Jy ! Component: 3550 - total flux cleaned = 0.00236803 Jy ! Component: 3600 - total flux cleaned = 0.00236808 Jy ! Component: 3650 - total flux cleaned = 0.00243436 Jy ! Component: 3700 - total flux cleaned = 0.00240144 Jy ! Component: 3750 - total flux cleaned = 0.00238514 Jy ! Component: 3800 - total flux cleaned = 0.00238505 Jy ! Component: 3850 - total flux cleaned = 0.00240115 Jy ! Component: 3900 - total flux cleaned = 0.0023851 Jy ! Component: 3950 - total flux cleaned = 0.00240113 Jy ! Component: 4000 - total flux cleaned = 0.00236936 Jy ! Component: 4050 - total flux cleaned = 0.0023851 Jy ! Total flux subtracted in 4096 components = 0.00236926 Jy ! Clean residual min=-0.000806 max=0.000906 Jy/beam ! Clean residual mean=-0.000006 rms=0.000280 Jy/beam ! Combined flux in latest and established models = 0.118621 Jy keep ! Adding 207 model components to the UV plane model. ! The established model now contains 249 components and 0.118621 Jy ![Exited script file: muppet] wmap "J2245-0755_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.731 x 8.486 at 13.25 degrees (North through East) ! Clean map min=-0.0027805 max=0.0984 Jy/beam ! Writing clean map to FITS file: J2245-0755_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0984002 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000268842 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.819639 0.819639 1.63928 3.27856 6.55711 13.1142 26.2285 52.4569 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.098 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.731 x 8.486 at 13.25 degrees (North through East) ! Clean map min=-0.0027805 max=0.0984 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2245-0755_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:37:23 2017