! Started logfile: J2245+0324_S_2015_01_23_pus_uvs.log on Mon Jan 2 19:37:09 2017 obs J2245+0324_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J2245+0324_S_2015_01_23_pus_uva.fits ! AN table 1: 56 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.961508 visibilities/baseline/integration-bin. ! Found source: J2245+0324 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 9692 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2245+0324_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.833108Jy sigma=0.007499 ! Fit after self-cal, rms=0.788891Jy sigma=0.007060 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.728 mas, bmaj=6.431 mas, bpa=-1.893 degrees ! Estimated noise=968.491 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.251238 Jy ! Component: 100 - total flux cleaned = 0.334145 Jy ! Total flux subtracted in 100 components = 0.334145 Jy ! Clean residual min=-0.019765 max=0.057168 Jy/beam ! Clean residual mean=0.000051 rms=0.006391 Jy/beam ! Combined flux in latest and established models = 0.334145 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.334145 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.440593Jy sigma=0.001438 ! Fit after self-cal, rms=0.440050Jy sigma=0.001427 ! Inverting map ! Added new window around map position (3, 4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0566797 Jy ! Component: 100 - total flux cleaned = 0.0846751 Jy ! Total flux subtracted in 100 components = 0.0846751 Jy ! Clean residual min=-0.014252 max=0.032193 Jy/beam ! Clean residual mean=0.000030 rms=0.004098 Jy/beam ! Combined flux in latest and established models = 0.41882 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 18 components and 0.41882 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.430996Jy sigma=0.001132 ! Fit after self-cal, rms=0.430190Jy sigma=0.001102 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0248817 Jy ! Component: 100 - total flux cleaned = 0.0370838 Jy ! Total flux subtracted in 100 components = 0.0370838 Jy ! Clean residual min=-0.010795 max=0.019709 Jy/beam ! Clean residual mean=0.000021 rms=0.003161 Jy/beam ! Combined flux in latest and established models = 0.455904 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 32 components and 0.455904 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.428136Jy sigma=0.001033 ! Fit after self-cal, rms=0.427887Jy sigma=0.001021 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.247 mas, bmaj=7.251 mas, bpa=-2.853 degrees ! Estimated noise=764.262 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0148327 Jy ! Component: 100 - total flux cleaned = 0.021715 Jy ! Component: 150 - total flux cleaned = 0.0261845 Jy ! Component: 200 - total flux cleaned = 0.02791 Jy ! Total flux subtracted in 200 components = 0.02791 Jy ! Clean residual min=-0.009958 max=0.017042 Jy/beam ! Clean residual mean=0.000031 rms=0.003327 Jy/beam ! Combined flux in latest and established models = 0.483814 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 49 components and 0.483814 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.427147Jy sigma=0.000998 ! Fit after self-cal, rms=0.427051Jy sigma=0.000994 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 2.29 HN 0.97 KP 1.08 ! LA 1.07 MK 0.96 NL 1.00 OV 0.96 ! PT 0.99 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 2.65 HN 1.03 KP 1.00 ! LA 1.03 MK 0.94 NL 1.20 OV 0.99 ! PT 0.99 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 2.23 HN 1.04 KP 0.87 ! LA 0.85 MK 0.98 NL 1.38 OV 0.92 ! PT 0.96 SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 2.39 HN 1.00 KP 0.81 ! LA 0.90 MK 0.96 NL 1.04 OV 0.99 ! PT 1.01 SC 0.99 ! ! ! Fit before self-cal, rms=0.427051Jy sigma=0.000994 ! Fit after self-cal, rms=0.984544Jy sigma=0.000846 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.224 mas, bmaj=7.23 mas, bpa=-3.029 degrees ! Estimated noise=765.425 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00474359 Jy ! Component: 100 - total flux cleaned = 0.00421136 Jy ! Component: 150 - total flux cleaned = 0.00329789 Jy ! Component: 200 - total flux cleaned = 0.0026416 Jy ! Total flux subtracted in 200 components = 0.0026416 Jy ! Clean residual min=-0.009914 max=0.009458 Jy/beam ! Clean residual mean=0.000014 rms=0.001933 Jy/beam ! Combined flux in latest and established models = 0.486455 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 58 components and 0.486455 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.984215Jy sigma=0.000840 ! Fit after self-cal, rms=0.984202Jy sigma=0.000836 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.984202Jy sigma=0.000836 ! Fit after self-cal, rms=0.393165Jy sigma=0.000793 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.22 mas, bmaj=7.24 mas, bpa=-3.173 degrees ! Estimated noise=767.764 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00208948 Jy ! Component: 100 - total flux cleaned = 0.00176464 Jy ! Component: 150 - total flux cleaned = 0.00117181 Jy ! Component: 200 - total flux cleaned = 0.000698089 Jy ! Total flux subtracted in 200 components = 0.000698089 Jy ! Clean residual min=-0.004817 max=0.007567 Jy/beam ! Clean residual mean=0.000003 rms=0.001016 Jy/beam ! Combined flux in latest and established models = 0.487154 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 62 components and 0.487154 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.393027Jy sigma=0.000790 ! Fit after self-cal, rms=0.393016Jy sigma=0.000788 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5, -3.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00467035 Jy ! Component: 100 - total flux cleaned = 0.00589222 Jy ! Component: 150 - total flux cleaned = 0.0062441 Jy ! Component: 200 - total flux cleaned = 0.00634885 Jy ! Total flux subtracted in 200 components = 0.00634885 Jy ! Clean residual min=-0.004064 max=0.003394 Jy/beam ! Clean residual mean=-0.000002 rms=0.000830 Jy/beam ! Combined flux in latest and established models = 0.493502 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 76 components and 0.493502 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.392819Jy sigma=0.000782 ! Fit after self-cal, rms=0.392834Jy sigma=0.000782 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.392834Jy sigma=0.000782 ! Fit after self-cal, rms=0.397729Jy sigma=0.000781 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.22 mas, bmaj=7.234 mas, bpa=-3.092 degrees ! Estimated noise=770.085 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00221926 Jy ! Component: 100 - total flux cleaned = 0.00308029 Jy ! Component: 150 - total flux cleaned = 0.00322337 Jy ! Component: 200 - total flux cleaned = 0.00309666 Jy ! Total flux subtracted in 200 components = 0.00309666 Jy ! Clean residual min=-0.003536 max=0.003148 Jy/beam ! Clean residual mean=-0.000001 rms=0.000770 Jy/beam ! Combined flux in latest and established models = 0.496599 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 83 components and 0.496599 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.397610Jy sigma=0.000780 ! Fit after self-cal, rms=0.397615Jy sigma=0.000780 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6.5, -34.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00159758 Jy ! Component: 100 - total flux cleaned = 0.00177105 Jy ! Component: 150 - total flux cleaned = 0.00184021 Jy ! Component: 200 - total flux cleaned = 0.0020763 Jy ! Total flux subtracted in 200 components = 0.0020763 Jy ! Clean residual min=-0.003042 max=0.002695 Jy/beam ! Clean residual mean=-0.000001 rms=0.000717 Jy/beam ! Combined flux in latest and established models = 0.498675 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 100 components and 0.498675 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.397555Jy sigma=0.000778 ! Fit after self-cal, rms=0.397557Jy sigma=0.000778 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.397557Jy sigma=0.000778 ! Fit after self-cal, rms=0.399312Jy sigma=0.000778 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.019 mas, bmaj=11.37 mas, bpa=-6.167 degrees ! Estimated noise=1023.81 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00106368 Jy ! Component: 100 - total flux cleaned = 0.00125074 Jy ! Component: 150 - total flux cleaned = 0.00136936 Jy ! Component: 200 - total flux cleaned = 0.00153452 Jy ! Total flux subtracted in 200 components = 0.00153452 Jy ! Clean residual min=-0.003135 max=0.003607 Jy/beam ! Clean residual mean=-0.000003 rms=0.000821 Jy/beam ! Combined flux in latest and established models = 0.50021 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 112 components and 0.50021 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.399233Jy sigma=0.000778 ! Fit after self-cal, rms=0.399242Jy sigma=0.000777 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-124.5, -29). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00274095 Jy ! Component: 100 - total flux cleaned = 0.00329978 Jy ! Component: 150 - total flux cleaned = 0.00400179 Jy ! Component: 200 - total flux cleaned = 0.00460467 Jy ! Total flux subtracted in 200 components = 0.00460467 Jy ! Clean residual min=-0.002681 max=0.002618 Jy/beam ! Clean residual mean=-0.000002 rms=0.000758 Jy/beam ! Combined flux in latest and established models = 0.504814 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 143 components and 0.504814 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.399141Jy sigma=0.000777 ! Fit after self-cal, rms=0.399143Jy sigma=0.000777 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.219 mas, bmaj=7.232 mas, bpa=-3.052 degrees ! Estimated noise=772.315 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.219 x 7.232 at -3.052 degrees (North through East) ! Clean map min=-0.0026192 max=0.30029 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.709 mas, bmaj=6.422 mas, bpa=-1.969 degrees ! Estimated noise=972.511 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.260795 Jy ! Component: 100 - total flux cleaned = 0.362352 Jy ! Component: 150 - total flux cleaned = 0.406978 Jy ! Component: 200 - total flux cleaned = 0.431631 Jy ! Total flux subtracted in 200 components = 0.431631 Jy ! Clean residual min=-0.007096 max=0.013045 Jy/beam ! Clean residual mean=0.000018 rms=0.001971 Jy/beam ! Combined flux in latest and established models = 0.43163 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.43163 Jy ! Inverting map and beam ! Estimated beam: bmin=3.219 mas, bmaj=7.232 mas, bpa=-3.052 degrees ! Estimated noise=772.315 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0224895 Jy ! Component: 100 - total flux cleaned = 0.036173 Jy ! Component: 150 - total flux cleaned = 0.0450984 Jy ! Component: 200 - total flux cleaned = 0.051155 Jy ! Total flux subtracted in 200 components = 0.051155 Jy ! Clean residual min=-0.002887 max=0.003500 Jy/beam ! Clean residual mean=0.000010 rms=0.000847 Jy/beam ! Combined flux in latest and established models = 0.482785 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 71 components and 0.482785 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.019 mas, bmaj=11.37 mas, bpa=-6.167 degrees ! Estimated noise=1023.81 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00662183 Jy ! Component: 100 - total flux cleaned = 0.010515 Jy ! Component: 150 - total flux cleaned = 0.0133237 Jy ! Component: 200 - total flux cleaned = 0.0155977 Jy ! Total flux subtracted in 200 components = 0.0155977 Jy ! Clean residual min=-0.002771 max=0.002746 Jy/beam ! Clean residual mean=0.000005 rms=0.000764 Jy/beam ! Combined flux in latest and established models = 0.498383 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00146811 Jy ! Component: 100 - total flux cleaned = 0.00262388 Jy ! Component: 150 - total flux cleaned = 0.00353869 Jy ! Component: 200 - total flux cleaned = 0.00431447 Jy ! Total flux subtracted in 200 components = 0.00431447 Jy ! Clean residual min=-0.002501 max=0.002671 Jy/beam ! Clean residual mean=0.000002 rms=0.000717 Jy/beam ! Combined flux in latest and established models = 0.502698 Jy ! Adding 88 model components to the UV plane model. ! The established model now contains 147 components and 0.502698 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.219 mas, bmaj=7.232 mas, bpa=-3.052 degrees ! Estimated noise=772.315 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00115945 Jy ! Component: 100 - total flux cleaned = 0.00152981 Jy ! Component: 150 - total flux cleaned = 0.00204788 Jy ! Component: 200 - total flux cleaned = 0.0025834 Jy ! Total flux subtracted in 200 components = 0.0025834 Jy ! Clean residual min=-0.003073 max=0.002595 Jy/beam ! Clean residual mean=-0.000002 rms=0.000629 Jy/beam ! Combined flux in latest and established models = 0.505281 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 178 components and 0.505281 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.399130Jy sigma=0.000776 ! Fit after self-cal, rms=0.399128Jy sigma=0.000775 wmodel J2245+0324_S_2015_01_23_pus_map.mod ! Writing 178 model components to file: J2245+0324_S_2015_01_23_pus_map.mod wobs J2245+0324_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J2245+0324_S_2015_01_23_pus_uvs.fits wwins J2245+0324_S_2015_01_23_pus_map.win ! wwins: Wrote 5 windows to J2245+0324_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000533368 Jy ! Component: 100 - total flux cleaned = 0.0007911 Jy ! Component: 150 - total flux cleaned = 0.000874082 Jy ! Component: 200 - total flux cleaned = 0.00110694 Jy ! Component: 250 - total flux cleaned = 0.00132906 Jy ! Component: 300 - total flux cleaned = 0.00161708 Jy ! Component: 350 - total flux cleaned = 0.00182655 Jy ! Component: 400 - total flux cleaned = 0.00196293 Jy ! Component: 450 - total flux cleaned = 0.00216167 Jy ! Component: 500 - total flux cleaned = 0.00229156 Jy ! Component: 550 - total flux cleaned = 0.00232357 Jy ! Component: 600 - total flux cleaned = 0.00244868 Jy ! Component: 650 - total flux cleaned = 0.00244918 Jy ! Component: 700 - total flux cleaned = 0.00257059 Jy ! Component: 750 - total flux cleaned = 0.00259981 Jy ! Component: 800 - total flux cleaned = 0.00268689 Jy ! Component: 850 - total flux cleaned = 0.00268709 Jy ! Component: 900 - total flux cleaned = 0.00274362 Jy ! Component: 950 - total flux cleaned = 0.00268764 Jy ! Component: 1000 - total flux cleaned = 0.00271536 Jy ! Component: 1050 - total flux cleaned = 0.00276981 Jy ! Component: 1100 - total flux cleaned = 0.00274266 Jy ! Component: 1150 - total flux cleaned = 0.00271558 Jy ! Component: 1200 - total flux cleaned = 0.00266279 Jy ! Component: 1250 - total flux cleaned = 0.00271505 Jy ! Component: 1300 - total flux cleaned = 0.00268919 Jy ! Component: 1350 - total flux cleaned = 0.00266367 Jy ! Component: 1400 - total flux cleaned = 0.00263863 Jy ! Component: 1450 - total flux cleaned = 0.00273873 Jy ! Component: 1500 - total flux cleaned = 0.0027389 Jy ! Component: 1550 - total flux cleaned = 0.00271447 Jy ! Component: 1600 - total flux cleaned = 0.00278755 Jy ! Component: 1650 - total flux cleaned = 0.00271563 Jy ! Component: 1700 - total flux cleaned = 0.00288252 Jy ! Component: 1750 - total flux cleaned = 0.00271716 Jy ! Component: 1800 - total flux cleaned = 0.00276434 Jy ! Component: 1850 - total flux cleaned = 0.00269486 Jy ! Component: 1900 - total flux cleaned = 0.00269495 Jy ! Component: 1950 - total flux cleaned = 0.0026495 Jy ! Component: 2000 - total flux cleaned = 0.00264984 Jy ! Component: 2050 - total flux cleaned = 0.0025823 Jy ! Component: 2100 - total flux cleaned = 0.00264924 Jy ! Component: 2150 - total flux cleaned = 0.00269354 Jy ! Component: 2200 - total flux cleaned = 0.00262742 Jy ! Component: 2250 - total flux cleaned = 0.00254063 Jy ! Component: 2300 - total flux cleaned = 0.00254061 Jy ! Component: 2350 - total flux cleaned = 0.00245525 Jy ! Component: 2400 - total flux cleaned = 0.00247666 Jy ! Component: 2450 - total flux cleaned = 0.00243438 Jy ! Component: 2500 - total flux cleaned = 0.00239236 Jy ! Component: 2550 - total flux cleaned = 0.00235071 Jy ! Component: 2600 - total flux cleaned = 0.00228883 Jy ! Component: 2650 - total flux cleaned = 0.00220706 Jy ! Component: 2700 - total flux cleaned = 0.00222759 Jy ! Component: 2750 - total flux cleaned = 0.00220726 Jy ! Component: 2800 - total flux cleaned = 0.00222722 Jy ! Component: 2850 - total flux cleaned = 0.00214737 Jy ! Component: 2900 - total flux cleaned = 0.00206832 Jy ! Component: 2950 - total flux cleaned = 0.00216684 Jy ! Component: 3000 - total flux cleaned = 0.00214736 Jy ! Component: 3050 - total flux cleaned = 0.00214743 Jy ! Component: 3100 - total flux cleaned = 0.00214763 Jy ! Component: 3150 - total flux cleaned = 0.00216692 Jy ! Component: 3200 - total flux cleaned = 0.00220509 Jy ! Component: 3250 - total flux cleaned = 0.00216704 Jy ! Component: 3300 - total flux cleaned = 0.00218595 Jy ! Component: 3350 - total flux cleaned = 0.00216715 Jy ! Component: 3400 - total flux cleaned = 0.00216722 Jy ! Component: 3450 - total flux cleaned = 0.00220431 Jy ! Component: 3500 - total flux cleaned = 0.00216717 Jy ! Component: 3550 - total flux cleaned = 0.00220398 Jy ! Component: 3600 - total flux cleaned = 0.00216732 Jy ! Component: 3650 - total flux cleaned = 0.00223997 Jy ! Component: 3700 - total flux cleaned = 0.00218562 Jy ! Component: 3750 - total flux cleaned = 0.00223966 Jy ! Component: 3800 - total flux cleaned = 0.0022396 Jy ! Component: 3850 - total flux cleaned = 0.00225746 Jy ! Component: 3900 - total flux cleaned = 0.00227533 Jy ! Component: 3950 - total flux cleaned = 0.00232831 Jy ! Component: 4000 - total flux cleaned = 0.00231072 Jy ! Component: 4050 - total flux cleaned = 0.00231077 Jy ! Total flux subtracted in 4096 components = 0.00238068 Jy ! Clean residual min=-0.001036 max=0.000998 Jy/beam ! Clean residual mean=0.000000 rms=0.000338 Jy/beam ! Combined flux in latest and established models = 0.507662 Jy keep ! Adding 289 model components to the UV plane model. ! The established model now contains 466 components and 0.507662 Jy ![Exited script file: muppet] wmap "J2245+0324_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.219 x 7.232 at -3.052 degrees (North through East) ! Clean map min=-0.0023045 max=0.2993 Jy/beam ! Writing clean map to FITS file: J2245+0324_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.299297 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00033506 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.335847 0.335847 0.671694 1.34339 2.68677 5.37355 10.7471 21.4942 42.9884 85.9768 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.299 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.219 x 7.232 at -3.052 degrees (North through East) ! Clean map min=-0.0023045 max=0.2993 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2245+0324_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 19:37:14 2017