! Started logfile: J2230-1325_S_2015_01_23_pus_uvs.log on Mon Jan 2 19:36:39 2017 obs J2230-1325_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J2230-1325_S_2015_01_23_pus_uva.fits ! AN table 1: 104 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.967949 visibilities/baseline/integration-bin. ! Found source: J2230-1325 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 18120 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2230-1325_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 69 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 119 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.853013Jy sigma=0.007469 ! Fit after self-cal, rms=0.793325Jy sigma=0.006923 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.451 mas, bmaj=6.467 mas, bpa=-3.507 degrees ! Estimated noise=951.657 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.223207 Jy ! Component: 100 - total flux cleaned = 0.272505 Jy ! Total flux subtracted in 100 components = 0.272505 Jy ! Clean residual min=-0.015071 max=0.023170 Jy/beam ! Clean residual mean=0.000050 rms=0.004674 Jy/beam ! Combined flux in latest and established models = 0.272505 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.272505 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.406105Jy sigma=0.001129 ! Fit after self-cal, rms=0.406100Jy sigma=0.001129 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.952 mas, bmaj=7.309 mas, bpa=-4.111 degrees ! Estimated noise=604.918 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0230111 Jy ! Component: 100 - total flux cleaned = 0.0335375 Jy ! Component: 150 - total flux cleaned = 0.0377087 Jy ! Component: 200 - total flux cleaned = 0.0385409 Jy ! Total flux subtracted in 200 components = 0.0385409 Jy ! Clean residual min=-0.017293 max=0.025404 Jy/beam ! Clean residual mean=0.000058 rms=0.005436 Jy/beam ! Combined flux in latest and established models = 0.311046 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 15 components and 0.311046 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.403125Jy sigma=0.001094 ! Fit after self-cal, rms=0.403144Jy sigma=0.001094 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.72 HN 0.99 KP 1.00 ! LA 1.52 MK 1.00 NL 1.10 OV 0.92 ! PT 0.94 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.01 HN 1.05 KP 0.92 ! LA 1.45 MK 0.99 NL 1.34 OV 0.95 ! PT 0.95 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 1.00* HN 1.04 KP 0.80 ! LA 1.16 MK 1.01 NL 1.24 OV 0.88 ! PT 0.92 SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.09 HN 0.99 KP 0.74 ! LA 1.26 MK 1.00 NL 1.04 OV 0.92 ! PT 0.95 SC 0.97 ! ! ! Fit before self-cal, rms=0.403144Jy sigma=0.001094 ! Fit after self-cal, rms=0.383460Jy sigma=0.000955 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.953 mas, bmaj=7.29 mas, bpa=-3.761 degrees ! Estimated noise=605.683 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00311366 Jy ! Component: 100 - total flux cleaned = 0.0038632 Jy ! Component: 150 - total flux cleaned = 0.00396787 Jy ! Component: 200 - total flux cleaned = 0.00405971 Jy ! Total flux subtracted in 200 components = 0.00405971 Jy ! Clean residual min=-0.013530 max=0.017020 Jy/beam ! Clean residual mean=0.000064 rms=0.003843 Jy/beam ! Combined flux in latest and established models = 0.315106 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 28 components and 0.315106 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.383249Jy sigma=0.000954 ! Fit after self-cal, rms=0.383763Jy sigma=0.000953 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.383763Jy sigma=0.000953 ! Fit after self-cal, rms=0.422106Jy sigma=0.000837 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.942 mas, bmaj=7.267 mas, bpa=-3.78 degrees ! Estimated noise=613.476 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0043581 Jy ! Component: 100 - total flux cleaned = 0.00644296 Jy ! Component: 150 - total flux cleaned = 0.00725676 Jy ! Component: 200 - total flux cleaned = 0.00745489 Jy ! Total flux subtracted in 200 components = 0.00745489 Jy ! Clean residual min=-0.006479 max=0.015442 Jy/beam ! Clean residual mean=0.000010 rms=0.002273 Jy/beam ! Combined flux in latest and established models = 0.32256 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 41 components and 0.322561 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.421765Jy sigma=0.000836 ! Fit after self-cal, rms=0.422133Jy sigma=0.000836 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-11.5, -7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0136774 Jy ! Component: 100 - total flux cleaned = 0.0203674 Jy ! Component: 150 - total flux cleaned = 0.02392 Jy ! Component: 200 - total flux cleaned = 0.0251463 Jy ! Total flux subtracted in 200 components = 0.0251463 Jy ! Clean residual min=-0.005210 max=0.010619 Jy/beam ! Clean residual mean=0.000007 rms=0.001680 Jy/beam ! Combined flux in latest and established models = 0.347707 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 58 components and 0.347707 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.421342Jy sigma=0.000815 ! Fit after self-cal, rms=0.421154Jy sigma=0.000812 ! Inverting map ! Added new window around map position (-20, -11.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00948313 Jy ! Component: 100 - total flux cleaned = 0.0149118 Jy ! Component: 150 - total flux cleaned = 0.0185447 Jy ! Component: 200 - total flux cleaned = 0.0212163 Jy ! Total flux subtracted in 200 components = 0.0212163 Jy ! Clean residual min=-0.004446 max=0.004228 Jy/beam ! Clean residual mean=0.000007 rms=0.001136 Jy/beam ! Combined flux in latest and established models = 0.368923 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 102 components and 0.368923 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.420675Jy sigma=0.000800 ! Fit after self-cal, rms=0.420593Jy sigma=0.000800 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.420593Jy sigma=0.000800 ! Fit after self-cal, rms=0.428887Jy sigma=0.000793 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.931 mas, bmaj=7.254 mas, bpa=-3.732 degrees ! Estimated noise=613.798 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00360776 Jy ! Component: 100 - total flux cleaned = 0.00578851 Jy ! Component: 150 - total flux cleaned = 0.00746158 Jy ! Component: 200 - total flux cleaned = 0.00839404 Jy ! Total flux subtracted in 200 components = 0.00839404 Jy ! Clean residual min=-0.002676 max=0.003045 Jy/beam ! Clean residual mean=-0.000005 rms=0.000706 Jy/beam ! Combined flux in latest and established models = 0.377317 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 129 components and 0.377317 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.428696Jy sigma=0.000791 ! Fit after self-cal, rms=0.428665Jy sigma=0.000791 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00184576 Jy ! Component: 100 - total flux cleaned = 0.00258681 Jy ! Component: 150 - total flux cleaned = 0.00284586 Jy ! Component: 200 - total flux cleaned = 0.00296381 Jy ! Total flux subtracted in 200 components = 0.00296381 Jy ! Clean residual min=-0.002594 max=0.002838 Jy/beam ! Clean residual mean=-0.000005 rms=0.000677 Jy/beam ! Combined flux in latest and established models = 0.380281 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 141 components and 0.380281 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.428594Jy sigma=0.000791 ! Fit after self-cal, rms=0.428591Jy sigma=0.000791 ! Inverting map ! Added new window around map position (-102, 80.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0023903 Jy ! Component: 100 - total flux cleaned = 0.0036092 Jy ! Component: 150 - total flux cleaned = 0.00427941 Jy ! Component: 200 - total flux cleaned = 0.00469562 Jy ! Total flux subtracted in 200 components = 0.00469562 Jy ! Clean residual min=-0.002485 max=0.002415 Jy/beam ! Clean residual mean=-0.000005 rms=0.000634 Jy/beam ! Combined flux in latest and established models = 0.384976 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 156 components and 0.384976 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.428532Jy sigma=0.000790 ! Fit after self-cal, rms=0.428516Jy sigma=0.000790 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.428516Jy sigma=0.000790 ! Fit after self-cal, rms=0.431346Jy sigma=0.000790 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.125 mas, bmaj=13.49 mas, bpa=-2.992 degrees ! Estimated noise=850.302 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00313821 Jy ! Component: 100 - total flux cleaned = 0.0040886 Jy ! Component: 150 - total flux cleaned = 0.00408811 Jy ! Component: 200 - total flux cleaned = 0.00431202 Jy ! Total flux subtracted in 200 components = 0.00431202 Jy ! Clean residual min=-0.003362 max=0.003696 Jy/beam ! Clean residual mean=-0.000012 rms=0.000921 Jy/beam ! Combined flux in latest and established models = 0.389288 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 184 components and 0.389288 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.431215Jy sigma=0.000790 ! Fit after self-cal, rms=0.431199Jy sigma=0.000790 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000373946 Jy ! Component: 100 - total flux cleaned = 0.000675792 Jy ! Component: 150 - total flux cleaned = 0.000898901 Jy ! Component: 200 - total flux cleaned = 0.00109738 Jy ! Total flux subtracted in 200 components = 0.00109738 Jy ! Clean residual min=-0.003477 max=0.003744 Jy/beam ! Clean residual mean=-0.000012 rms=0.000912 Jy/beam ! Combined flux in latest and established models = 0.390386 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 195 components and 0.390386 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.431180Jy sigma=0.000790 ! Fit after self-cal, rms=0.431178Jy sigma=0.000790 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.926 mas, bmaj=7.245 mas, bpa=-3.755 degrees ! Estimated noise=615.691 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.926 x 7.245 at -3.755 degrees (North through East) ! Clean map min=-0.0023342 max=0.29448 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.423 mas, bmaj=6.414 mas, bpa=-3.077 degrees ! Estimated noise=963.811 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.225869 Jy ! Component: 100 - total flux cleaned = 0.276954 Jy ! Component: 150 - total flux cleaned = 0.300206 Jy ! Component: 200 - total flux cleaned = 0.315141 Jy ! Total flux subtracted in 200 components = 0.315141 Jy ! Clean residual min=-0.006021 max=0.008560 Jy/beam ! Clean residual mean=0.000007 rms=0.001762 Jy/beam ! Combined flux in latest and established models = 0.315141 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.315141 Jy ! Inverting map and beam ! Estimated beam: bmin=2.926 mas, bmaj=7.245 mas, bpa=-3.755 degrees ! Estimated noise=615.691 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0154443 Jy ! Component: 100 - total flux cleaned = 0.0262182 Jy ! Component: 150 - total flux cleaned = 0.0343045 Jy ! Component: 200 - total flux cleaned = 0.0405422 Jy ! Total flux subtracted in 200 components = 0.0405422 Jy ! Clean residual min=-0.003566 max=0.005320 Jy/beam ! Clean residual mean=0.000002 rms=0.000995 Jy/beam ! Combined flux in latest and established models = 0.355684 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 60 components and 0.355684 Jy ! Inverting map ! Added new window around map position (19, -65.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00537001 Jy ! Component: 100 - total flux cleaned = 0.00938299 Jy ! Component: 150 - total flux cleaned = 0.0127076 Jy ! Component: 200 - total flux cleaned = 0.0155463 Jy ! Total flux subtracted in 200 components = 0.0155463 Jy ! Clean residual min=-0.002641 max=0.003450 Jy/beam ! Clean residual mean=0.000000 rms=0.000700 Jy/beam ! Combined flux in latest and established models = 0.37123 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 99 components and 0.37123 Jy ! Inverting map ! Added new window around map position (-4, -1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00330316 Jy ! Component: 100 - total flux cleaned = 0.00561137 Jy ! Component: 150 - total flux cleaned = 0.00758891 Jy ! Component: 200 - total flux cleaned = 0.00931612 Jy ! Total flux subtracted in 200 components = 0.00931612 Jy ! Clean residual min=-0.002355 max=0.002213 Jy/beam ! Clean residual mean=-0.000002 rms=0.000598 Jy/beam ! Combined flux in latest and established models = 0.380546 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 139 components and 0.380546 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.125 mas, bmaj=13.49 mas, bpa=-2.992 degrees ! Estimated noise=850.302 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00248063 Jy ! Component: 100 - total flux cleaned = 0.00430077 Jy ! Component: 150 - total flux cleaned = 0.00579475 Jy ! Component: 200 - total flux cleaned = 0.00685017 Jy ! Total flux subtracted in 200 components = 0.00685017 Jy ! Clean residual min=-0.003594 max=0.003176 Jy/beam ! Clean residual mean=-0.000006 rms=0.000900 Jy/beam ! Combined flux in latest and established models = 0.387396 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000525098 Jy ! Component: 100 - total flux cleaned = 0.000805901 Jy ! Component: 150 - total flux cleaned = 0.00103204 Jy ! Component: 200 - total flux cleaned = 0.00120965 Jy ! Total flux subtracted in 200 components = 0.00120965 Jy ! Clean residual min=-0.003591 max=0.003202 Jy/beam ! Clean residual mean=-0.000006 rms=0.000894 Jy/beam ! Combined flux in latest and established models = 0.388606 Jy ! Adding 86 model components to the UV plane model. ! The established model now contains 213 components and 0.388606 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.926 mas, bmaj=7.245 mas, bpa=-3.755 degrees ! Estimated noise=615.691 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000113332 Jy ! Component: 100 - total flux cleaned = 0.000196305 Jy ! Component: 150 - total flux cleaned = 0.000609085 Jy ! Component: 200 - total flux cleaned = 0.000880766 Jy ! Total flux subtracted in 200 components = 0.000880766 Jy ! Clean residual min=-0.002496 max=0.002368 Jy/beam ! Clean residual mean=-0.000003 rms=0.000573 Jy/beam ! Combined flux in latest and established models = 0.389487 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 238 components and 0.389487 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.431069Jy sigma=0.000789 ! Fit after self-cal, rms=0.431065Jy sigma=0.000789 wmodel J2230-1325_S_2015_01_23_pus_map.mod ! Writing 238 model components to file: J2230-1325_S_2015_01_23_pus_map.mod wobs J2230-1325_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J2230-1325_S_2015_01_23_pus_uvs.fits wwins J2230-1325_S_2015_01_23_pus_map.win ! wwins: Wrote 6 windows to J2230-1325_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000140586 Jy ! Component: 100 - total flux cleaned = -0.000176997 Jy ! Component: 150 - total flux cleaned = -0.000250863 Jy ! Component: 200 - total flux cleaned = -0.000148296 Jy ! Component: 250 - total flux cleaned = -4.87991e-05 Jy ! Component: 300 - total flux cleaned = -8.07331e-05 Jy ! Component: 350 - total flux cleaned = -4.98166e-05 Jy ! Component: 400 - total flux cleaned = -7.97759e-05 Jy ! Component: 450 - total flux cleaned = -0.000109469 Jy ! Component: 500 - total flux cleaned = -0.000313603 Jy ! Component: 550 - total flux cleaned = -0.000541862 Jy ! Component: 600 - total flux cleaned = -0.000681847 Jy ! Component: 650 - total flux cleaned = -0.000875503 Jy ! Component: 700 - total flux cleaned = -0.00109279 Jy ! Component: 750 - total flux cleaned = -0.00128042 Jy ! Component: 800 - total flux cleaned = -0.00146554 Jy ! Component: 850 - total flux cleaned = -0.00159577 Jy ! Component: 900 - total flux cleaned = -0.00174992 Jy ! Component: 950 - total flux cleaned = -0.00190161 Jy ! Component: 1000 - total flux cleaned = -0.00205178 Jy ! Component: 1050 - total flux cleaned = -0.00217508 Jy ! Component: 1100 - total flux cleaned = -0.00229694 Jy ! Component: 1150 - total flux cleaned = -0.0023936 Jy ! Component: 1200 - total flux cleaned = -0.00253674 Jy ! Component: 1250 - total flux cleaned = -0.00253666 Jy ! Component: 1300 - total flux cleaned = -0.00267718 Jy ! Component: 1350 - total flux cleaned = -0.00274668 Jy ! Component: 1400 - total flux cleaned = -0.00288451 Jy ! Component: 1450 - total flux cleaned = -0.00302087 Jy ! Component: 1500 - total flux cleaned = -0.00308845 Jy ! Component: 1550 - total flux cleaned = -0.00324479 Jy ! Component: 1600 - total flux cleaned = -0.00328883 Jy ! Component: 1650 - total flux cleaned = -0.00339864 Jy ! Component: 1700 - total flux cleaned = -0.00348579 Jy ! Component: 1750 - total flux cleaned = -0.00350735 Jy ! Component: 1800 - total flux cleaned = -0.00359278 Jy ! Component: 1850 - total flux cleaned = -0.00361415 Jy ! Component: 1900 - total flux cleaned = -0.00367758 Jy ! Component: 1950 - total flux cleaned = -0.00369846 Jy ! Component: 2000 - total flux cleaned = -0.00371934 Jy ! Component: 2050 - total flux cleaned = -0.00374007 Jy ! Component: 2100 - total flux cleaned = -0.00382195 Jy ! Component: 2150 - total flux cleaned = -0.0038628 Jy ! Component: 2200 - total flux cleaned = -0.00396373 Jy ! Component: 2250 - total flux cleaned = -0.00398365 Jy ! Component: 2300 - total flux cleaned = -0.00402343 Jy ! Component: 2350 - total flux cleaned = -0.00414218 Jy ! Component: 2400 - total flux cleaned = -0.00414201 Jy ! Component: 2450 - total flux cleaned = -0.00410304 Jy ! Component: 2500 - total flux cleaned = -0.00421976 Jy ! Component: 2550 - total flux cleaned = -0.00427767 Jy ! Component: 2600 - total flux cleaned = -0.00431607 Jy ! Component: 2650 - total flux cleaned = -0.00433511 Jy ! Component: 2700 - total flux cleaned = -0.00435409 Jy ! Component: 2750 - total flux cleaned = -0.00446699 Jy ! Component: 2800 - total flux cleaned = -0.00441063 Jy ! Component: 2850 - total flux cleaned = -0.00442928 Jy ! Component: 2900 - total flux cleaned = -0.00444785 Jy ! Component: 2950 - total flux cleaned = -0.00450319 Jy ! Component: 3000 - total flux cleaned = -0.00450318 Jy ! Component: 3050 - total flux cleaned = -0.0045398 Jy ! Component: 3100 - total flux cleaned = -0.00457608 Jy ! Component: 3150 - total flux cleaned = -0.00459411 Jy ! Component: 3200 - total flux cleaned = -0.00461204 Jy ! Component: 3250 - total flux cleaned = -0.00464781 Jy ! Component: 3300 - total flux cleaned = -0.00464796 Jy ! Component: 3350 - total flux cleaned = -0.00471892 Jy ! Component: 3400 - total flux cleaned = -0.00477198 Jy ! Component: 3450 - total flux cleaned = -0.00482459 Jy ! Component: 3500 - total flux cleaned = -0.00482457 Jy ! Component: 3550 - total flux cleaned = -0.00489413 Jy ! Component: 3600 - total flux cleaned = -0.00491137 Jy ! Component: 3650 - total flux cleaned = -0.00494582 Jy ! Component: 3700 - total flux cleaned = -0.0050661 Jy ! Component: 3750 - total flux cleaned = -0.00503186 Jy ! Component: 3800 - total flux cleaned = -0.00506602 Jy ! Component: 3850 - total flux cleaned = -0.00515082 Jy ! Component: 3900 - total flux cleaned = -0.00511703 Jy ! Component: 3950 - total flux cleaned = -0.00515078 Jy ! Component: 4000 - total flux cleaned = -0.00518435 Jy ! Component: 4050 - total flux cleaned = -0.00526795 Jy ! Total flux subtracted in 4096 components = -0.00523474 Jy ! Clean residual min=-0.000889 max=0.001084 Jy/beam ! Clean residual mean=-0.000003 rms=0.000331 Jy/beam ! Combined flux in latest and established models = 0.384252 Jy keep ! Adding 348 model components to the UV plane model. ! The established model now contains 584 components and 0.384252 Jy ![Exited script file: muppet] wmap "J2230-1325_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.926 x 7.245 at -3.755 degrees (North through East) ! Clean map min=-0.0023272 max=0.29607 Jy/beam ! Writing clean map to FITS file: J2230-1325_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.296069 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000328781 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.333146 0.333146 0.666293 1.33259 2.66517 5.33034 10.6607 21.3214 42.6427 85.2855 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.296 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.926 x 7.245 at -3.755 degrees (North through East) ! Clean map min=-0.0023272 max=0.29607 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2230-1325_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 19:36:45 2017