! Started logfile: J2225-1113_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:37:15 2017 obs J2225-1113_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J2225-1113_S_2014_01_04_pus_uva.fits ! AN table 1: 60 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.5 visibilities/baseline/integration-bin. ! Found source: J2225-1113 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 4320 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2225-1113_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 150 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 150 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 150 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 150 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.944975Jy sigma=0.011364 ! Fit after self-cal, rms=0.914265Jy sigma=0.011055 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.796 mas, bmaj=6.995 mas, bpa=13.77 degrees ! Estimated noise=1300.46 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0676597 Jy ! Component: 100 - total flux cleaned = 0.0829128 Jy ! Total flux subtracted in 100 components = 0.0829128 Jy ! Clean residual min=-0.004427 max=0.005125 Jy/beam ! Clean residual mean=0.000006 rms=0.001283 Jy/beam ! Combined flux in latest and established models = 0.0829127 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0829127 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086410Jy sigma=0.000914 ! Fit after self-cal, rms=0.086402Jy sigma=0.000913 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.409 mas, bmaj=8.179 mas, bpa=13.06 degrees ! Estimated noise=937.478 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00615096 Jy ! Component: 100 - total flux cleaned = 0.00858158 Jy ! Component: 150 - total flux cleaned = 0.00948009 Jy ! Component: 200 - total flux cleaned = 0.00970161 Jy ! Total flux subtracted in 200 components = 0.00970161 Jy ! Clean residual min=-0.004449 max=0.004470 Jy/beam ! Clean residual mean=0.000001 rms=0.001214 Jy/beam ! Combined flux in latest and established models = 0.0926143 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 24 components and 0.0926143 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085885Jy sigma=0.000910 ! Fit after self-cal, rms=0.085956Jy sigma=0.000910 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.00* KP 1.00* LA 1.00 ! MK 1.05 NL 0.99 OV 0.96 PT 1.05 ! SC 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00* KP 1.00* LA 1.05 ! MK 0.89 NL 0.98 OV 1.00 PT 1.02 ! SC 0.95 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.00* KP 1.00* LA 0.90 ! MK 1.02 NL 1.05 OV 0.93 PT 0.92 ! SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00* KP 1.00* LA 0.89 ! MK 1.01 NL 1.15 OV 0.99 PT 1.05 ! SC 1.06 ! ! ! Fit before self-cal, rms=0.085956Jy sigma=0.000910 ! Fit after self-cal, rms=0.084773Jy sigma=0.000904 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.384 mas, bmaj=8.183 mas, bpa=13.08 degrees ! Estimated noise=940.894 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00107963 Jy ! Component: 100 - total flux cleaned = 0.00122618 Jy ! Component: 150 - total flux cleaned = 0.00133388 Jy ! Component: 200 - total flux cleaned = 0.00138548 Jy ! Total flux subtracted in 200 components = 0.00138548 Jy ! Clean residual min=-0.004168 max=0.003649 Jy/beam ! Clean residual mean=0.000002 rms=0.001107 Jy/beam ! Combined flux in latest and established models = 0.0939998 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 33 components and 0.0939998 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084743Jy sigma=0.000904 ! Fit after self-cal, rms=0.084604Jy sigma=0.000904 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084604Jy sigma=0.000904 ! Fit after self-cal, rms=0.082753Jy sigma=0.000896 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.382 mas, bmaj=8.123 mas, bpa=13.2 degrees ! Estimated noise=937.509 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000731446 Jy ! Component: 100 - total flux cleaned = 0.000758146 Jy ! Component: 150 - total flux cleaned = 0.000835126 Jy ! Component: 200 - total flux cleaned = 0.000906528 Jy ! Total flux subtracted in 200 components = 0.000906528 Jy ! Clean residual min=-0.003781 max=0.003339 Jy/beam ! Clean residual mean=0.000005 rms=0.000867 Jy/beam ! Combined flux in latest and established models = 0.0949064 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 40 components and 0.0949064 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082733Jy sigma=0.000896 ! Fit after self-cal, rms=0.082806Jy sigma=0.000895 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00021033 Jy ! Component: 100 - total flux cleaned = 0.000209733 Jy ! Component: 150 - total flux cleaned = 0.000280879 Jy ! Component: 200 - total flux cleaned = 0.000324295 Jy ! Total flux subtracted in 200 components = 0.000324295 Jy ! Clean residual min=-0.003854 max=0.003397 Jy/beam ! Clean residual mean=0.000005 rms=0.000874 Jy/beam ! Combined flux in latest and established models = 0.0952307 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 43 components and 0.0952307 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082791Jy sigma=0.000895 ! Fit after self-cal, rms=0.082794Jy sigma=0.000895 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082794Jy sigma=0.000895 ! Fit after self-cal, rms=0.082850Jy sigma=0.000895 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.379 mas, bmaj=8.106 mas, bpa=13.23 degrees ! Estimated noise=938.33 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000546795 Jy ! Component: 100 - total flux cleaned = 0.000591066 Jy ! Component: 150 - total flux cleaned = 0.000652788 Jy ! Component: 200 - total flux cleaned = 0.000691062 Jy ! Total flux subtracted in 200 components = 0.000691062 Jy ! Clean residual min=-0.003757 max=0.003373 Jy/beam ! Clean residual mean=0.000005 rms=0.000863 Jy/beam ! Combined flux in latest and established models = 0.0959217 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 43 components and 0.0959217 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082838Jy sigma=0.000895 ! Fit after self-cal, rms=0.082882Jy sigma=0.000895 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000156663 Jy ! Component: 100 - total flux cleaned = 0.000175382 Jy ! Component: 150 - total flux cleaned = 0.000210932 Jy ! Component: 200 - total flux cleaned = 0.000260648 Jy ! Total flux subtracted in 200 components = 0.000260648 Jy ! Clean residual min=-0.003745 max=0.003386 Jy/beam ! Clean residual mean=0.000005 rms=0.000860 Jy/beam ! Combined flux in latest and established models = 0.0961824 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 45 components and 0.0961824 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082874Jy sigma=0.000895 ! Fit after self-cal, rms=0.082882Jy sigma=0.000895 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082882Jy sigma=0.000895 ! Fit after self-cal, rms=0.083006Jy sigma=0.000895 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.733 mas, bmaj=15.2 mas, bpa=13.37 degrees ! Estimated noise=1090.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000320847 Jy ! Component: 100 - total flux cleaned = 0.000408852 Jy ! Component: 150 - total flux cleaned = 0.000467574 Jy ! Component: 200 - total flux cleaned = 0.000536488 Jy ! Total flux subtracted in 200 components = 0.000536488 Jy ! Clean residual min=-0.003797 max=0.004073 Jy/beam ! Clean residual mean=0.000009 rms=0.001257 Jy/beam ! Combined flux in latest and established models = 0.0967189 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 50 components and 0.0967189 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083004Jy sigma=0.000895 ! Fit after self-cal, rms=0.083020Jy sigma=0.000895 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.22909e-06 Jy ! Component: 100 - total flux cleaned = 8.51438e-06 Jy ! Component: 150 - total flux cleaned = 5.59585e-05 Jy ! Component: 200 - total flux cleaned = 0.000100543 Jy ! Total flux subtracted in 200 components = 0.000100543 Jy ! Clean residual min=-0.003787 max=0.004034 Jy/beam ! Clean residual mean=0.000009 rms=0.001249 Jy/beam ! Combined flux in latest and established models = 0.0968194 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 52 components and 0.0968194 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083022Jy sigma=0.000895 ! Fit after self-cal, rms=0.083019Jy sigma=0.000895 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.377 mas, bmaj=8.094 mas, bpa=13.2 degrees ! Estimated noise=939.516 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.377 x 8.094 at 13.2 degrees (North through East) ! Clean map min=-0.0034999 max=0.084317 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.776 mas, bmaj=6.98 mas, bpa=13.71 degrees ! Estimated noise=1321.22 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0686619 Jy ! Component: 100 - total flux cleaned = 0.0845149 Jy ! Component: 150 - total flux cleaned = 0.090175 Jy ! Component: 200 - total flux cleaned = 0.0932 Jy ! Total flux subtracted in 200 components = 0.0932 Jy ! Clean residual min=-0.003833 max=0.003718 Jy/beam ! Clean residual mean=0.000005 rms=0.000973 Jy/beam ! Combined flux in latest and established models = 0.0932001 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.0932001 Jy ! Inverting map and beam ! Estimated beam: bmin=3.377 mas, bmaj=8.094 mas, bpa=13.2 degrees ! Estimated noise=939.516 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00187638 Jy ! Component: 100 - total flux cleaned = 0.00245712 Jy ! Component: 150 - total flux cleaned = 0.00259896 Jy ! Component: 200 - total flux cleaned = 0.00276296 Jy ! Total flux subtracted in 200 components = 0.00276296 Jy ! Clean residual min=-0.004006 max=0.003462 Jy/beam ! Clean residual mean=0.000006 rms=0.000890 Jy/beam ! Combined flux in latest and established models = 0.095963 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 27 components and 0.095963 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.733 mas, bmaj=15.2 mas, bpa=13.37 degrees ! Estimated noise=1090.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000325561 Jy ! Component: 100 - total flux cleaned = 0.000349273 Jy ! Component: 150 - total flux cleaned = 0.000412229 Jy ! Component: 200 - total flux cleaned = 0.000452694 Jy ! Total flux subtracted in 200 components = 0.000452694 Jy ! Clean residual min=-0.003828 max=0.004113 Jy/beam ! Clean residual mean=0.000009 rms=0.001274 Jy/beam ! Combined flux in latest and established models = 0.0964157 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.79039e-05 Jy ! Component: 100 - total flux cleaned = 9.5223e-05 Jy ! Component: 150 - total flux cleaned = 0.000148874 Jy ! Component: 200 - total flux cleaned = 0.00018336 Jy ! Total flux subtracted in 200 components = 0.00018336 Jy ! Clean residual min=-0.003809 max=0.004073 Jy/beam ! Clean residual mean=0.000009 rms=0.001263 Jy/beam ! Combined flux in latest and established models = 0.0965991 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 34 components and 0.0965991 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.377 mas, bmaj=8.094 mas, bpa=13.2 degrees ! Estimated noise=939.516 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000257607 Jy ! Component: 100 - total flux cleaned = -0.000164586 Jy ! Component: 150 - total flux cleaned = -2.7615e-05 Jy ! Component: 200 - total flux cleaned = 9.29785e-05 Jy ! Total flux subtracted in 200 components = 9.29785e-05 Jy ! Clean residual min=-0.003847 max=0.003364 Jy/beam ! Clean residual mean=0.000005 rms=0.000862 Jy/beam ! Combined flux in latest and established models = 0.0966921 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 40 components and 0.0966921 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083031Jy sigma=0.000895 ! Fit after self-cal, rms=0.083001Jy sigma=0.000895 wmodel J2225-1113_S_2014_01_04_pus_map.mod ! Writing 40 model components to file: J2225-1113_S_2014_01_04_pus_map.mod wobs J2225-1113_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J2225-1113_S_2014_01_04_pus_uvs.fits wwins J2225-1113_S_2014_01_04_pus_map.win ! wwins: Wrote 1 windows to J2225-1113_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000376094 Jy ! Component: 100 - total flux cleaned = 0.000166475 Jy ! Component: 150 - total flux cleaned = 0.000566443 Jy ! Component: 200 - total flux cleaned = 0.000843759 Jy ! Component: 250 - total flux cleaned = 0.00106045 Jy ! Component: 300 - total flux cleaned = 0.00126636 Jy ! Component: 350 - total flux cleaned = 0.00158291 Jy ! Component: 400 - total flux cleaned = 0.00185001 Jy ! Component: 450 - total flux cleaned = 0.00210666 Jy ! Component: 500 - total flux cleaned = 0.00221328 Jy ! Component: 550 - total flux cleaned = 0.00238479 Jy ! Component: 600 - total flux cleaned = 0.00248485 Jy ! Component: 650 - total flux cleaned = 0.00255018 Jy ! Component: 700 - total flux cleaned = 0.00261228 Jy ! Component: 750 - total flux cleaned = 0.00258137 Jy ! Component: 800 - total flux cleaned = 0.00255228 Jy ! Component: 850 - total flux cleaned = 0.00258169 Jy ! Component: 900 - total flux cleaned = 0.00258174 Jy ! Component: 950 - total flux cleaned = 0.00258192 Jy ! Component: 1000 - total flux cleaned = 0.00260922 Jy ! Component: 1050 - total flux cleaned = 0.00263539 Jy ! Component: 1100 - total flux cleaned = 0.00260939 Jy ! Component: 1150 - total flux cleaned = 0.00255831 Jy ! Component: 1200 - total flux cleaned = 0.00248357 Jy ! Component: 1250 - total flux cleaned = 0.00245947 Jy ! Component: 1300 - total flux cleaned = 0.00236364 Jy ! Component: 1350 - total flux cleaned = 0.00231691 Jy ! Component: 1400 - total flux cleaned = 0.00222482 Jy ! Component: 1450 - total flux cleaned = 0.00217945 Jy ! Component: 1500 - total flux cleaned = 0.00213461 Jy ! Component: 1550 - total flux cleaned = 0.00204703 Jy ! Component: 1600 - total flux cleaned = 0.00198226 Jy ! Component: 1650 - total flux cleaned = 0.00187587 Jy ! Component: 1700 - total flux cleaned = 0.00181273 Jy ! Component: 1750 - total flux cleaned = 0.00177142 Jy ! Component: 1800 - total flux cleaned = 0.00171047 Jy ! Component: 1850 - total flux cleaned = 0.00167091 Jy ! Component: 1900 - total flux cleaned = 0.00165107 Jy ! Component: 1950 - total flux cleaned = 0.00161248 Jy ! Component: 2000 - total flux cleaned = 0.00161212 Jy ! Component: 2050 - total flux cleaned = 0.00151747 Jy ! Component: 2100 - total flux cleaned = 0.00153614 Jy ! Component: 2150 - total flux cleaned = 0.00148066 Jy ! Component: 2200 - total flux cleaned = 0.001517 Jy ! Component: 2250 - total flux cleaned = 0.00149897 Jy ! Component: 2300 - total flux cleaned = 0.00151697 Jy ! Component: 2350 - total flux cleaned = 0.00153455 Jy ! Component: 2400 - total flux cleaned = 0.00146498 Jy ! Component: 2450 - total flux cleaned = 0.00141361 Jy ! Component: 2500 - total flux cleaned = 0.00136261 Jy ! Component: 2550 - total flux cleaned = 0.00132893 Jy ! Component: 2600 - total flux cleaned = 0.00124532 Jy ! Component: 2650 - total flux cleaned = 0.00119581 Jy ! Component: 2700 - total flux cleaned = 0.00108083 Jy ! Component: 2750 - total flux cleaned = 0.00104833 Jy ! Component: 2800 - total flux cleaned = 0.000983621 Jy ! Component: 2850 - total flux cleaned = 0.00091965 Jy ! Component: 2900 - total flux cleaned = 0.000856197 Jy ! Component: 2950 - total flux cleaned = 0.000824548 Jy ! Component: 3000 - total flux cleaned = 0.00076197 Jy ! Component: 3050 - total flux cleaned = 0.000731007 Jy ! Component: 3100 - total flux cleaned = 0.000715667 Jy ! Component: 3150 - total flux cleaned = 0.000715621 Jy ! Component: 3200 - total flux cleaned = 0.000639767 Jy ! Component: 3250 - total flux cleaned = 0.000654877 Jy ! Component: 3300 - total flux cleaned = 0.000580227 Jy ! Component: 3350 - total flux cleaned = 0.000654583 Jy ! Component: 3400 - total flux cleaned = 0.000595539 Jy ! Component: 3450 - total flux cleaned = 0.000566238 Jy ! Component: 3500 - total flux cleaned = 0.000493417 Jy ! Component: 3550 - total flux cleaned = 0.000435495 Jy ! Component: 3600 - total flux cleaned = 0.000421098 Jy ! Component: 3650 - total flux cleaned = 0.00037818 Jy ! Component: 3700 - total flux cleaned = 0.000349721 Jy ! Component: 3750 - total flux cleaned = 0.000349626 Jy ! Component: 3800 - total flux cleaned = 0.000251171 Jy ! Component: 3850 - total flux cleaned = 0.000265164 Jy ! Component: 3900 - total flux cleaned = 0.000209347 Jy ! Component: 3950 - total flux cleaned = 0.000140065 Jy ! Component: 4000 - total flux cleaned = 0.00015374 Jy ! Component: 4050 - total flux cleaned = 0.000139987 Jy ! Total flux subtracted in 4096 components = 0.000140021 Jy ! Clean residual min=-0.000790 max=0.000790 Jy/beam ! Clean residual mean=0.000002 rms=0.000235 Jy/beam ! Combined flux in latest and established models = 0.0968321 Jy keep ! Adding 230 model components to the UV plane model. ! The established model now contains 270 components and 0.0968321 Jy ![Exited script file: muppet] wmap "J2225-1113_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.377 x 8.094 at 13.2 degrees (North through East) ! Clean map min=-0.0019598 max=0.084272 Jy/beam ! Writing clean map to FITS file: J2225-1113_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.084272 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000235054 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.836767 0.836767 1.67353 3.34707 6.69414 13.3883 26.7765 53.5531 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.084 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.377 x 8.094 at 13.2 degrees (North through East) ! Clean map min=-0.0019598 max=0.084272 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2225-1113_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:37:19 2017